Commission Implementing Regulation (EU) 2021/582

Contents

THE EUROPEAN COMMISSION,Having regard to the Treaty on the Functioning of the European Union,Having regard to Regulation (EU) 2016/1036 of the European Parliament and of the Council of 8 June 2016 on protection against dumped imports from countries not members of the European Union^note (‘the basic Regulation’), and in particular Article 7(4) thereof,After consulting the Member States,Whereas:

HAS ADOPTED THIS REGULATION:

Article 1 #

1.Without prejudice to Article 2, a provisional anti-dumping duty is hereby imposed on imports of aluminium products, flat rolled, whether or not alloyed, whether or not further worked than flat rolled, not backed, without internal layers of other material,

—in coils or in coiled strips, in cut-to-length sheets, or in the form of circles; of a thickness of 0,2 mm or more but not more than 6 mm,

—in plates, of a thickness of more than 6 mm,

—in coils or in coiled strips, of a thickness of not less than 0,03 mm but less than 0,2 mm,

currently falling under CN codes ex76061110 (TARIC codes 7606111025, 7606111086), ex76061191 (TARIC codes 7606119125, 7606119186), ex76061193 (TARIC codes 7606119325, 7606119386), ex76061199 (TARIC codes 7606119925, 7606119986), ex76061220 (TARIC codes 7606122025, 7606122088), ex76061292 (TARIC codes 7606129225, 7606129293), ex76061293 (TARIC code 7606129386), ex76061299 (TARIC codes 7606129925 and 7606129986), ex76069100 (TARIC codes 7606910025, 7606910086), ex76069200 (TARIC codes 7606920025, 7606920092), ex76071190 (TARIC codes 7607119044, 7607119048, 7607119051, 7607119053, 7607119065, 7607119071, 7607119073, 7607119075, 7607119077, 7607119091, 7607119093) and ex76071990 (TARIC codes 7607199075, 7607199094) and originating in the People’s Republic of China

2.The rates of the provisional anti-dumping duty applicable to the net, free-at-Union-frontier price, before duty, of the product described in paragraph 1 and produced by the companies listed below shall be as follows:CompanyProvisional anti-dumping duty (%)TARIC additional codeJiangsu Alcha Aluminum Group Co., Ltd.28,3C610Nanshan Group

—Shandong Nanshan Aluminium Co., Ltd.,

—Yantai Nanshan Aluminum New Material Co., Ltd.,

—Longkou Nanshan Aluminum Rolling New Material Co., Ltd.,

—Yantai Donghai Aluminum Foil Co., Ltd.

19,3C611Xiamen Xiashun Aluminium Foil Co., Ltd.21,4C612Other cooperating companies (Annex)22,6All other companies46,7C999

3.The application of the individual duty rates specified for the companies mentioned in paragraph 2 shall be conditional upon presentation to the Member States’ customs authorities of a valid commercial invoice, on which shall appear a declaration dated and signed by an official of the entity issuing such invoice, identified by his/her name and function, drafted as follows: ‘I, the undersigned, certify that the (volume) of (product concerned) sold for export to the European Union covered by this invoice was manufactured by (company name and address) (TARIC additional code) in [country concerned]. I declare that the information provided in this invoice is complete and correct.’ If no such invoice is presented, the duty applicable to all other companies shall apply.

4.The release for free circulation in the Union of the product referred to in paragraph 1 shall be subject to the provision of a security deposit equivalent to the amount of the provisional duty.

5.Unless otherwise specified, the provisions in force concerning customs duties shall apply.

Article 2 #

1.The following products shall be excluded from the product described in Article 1(1):

—Aluminium beverage can body stock, end stock and tab stock.

—Aluminium products, alloyed, of a thickness of not less than 0,2 mm and not more than 6 mm, for use as body panels in the car industry.

—Aluminium products, alloyed, of a thickness of not less than 0,8 mm, for use in the manufacture of aircraft parts.

2.The product described in Article 1(1) shall be exempted from provisional anti-dumping duty if it is imported for use in the production of coated coils and aluminium composite panels and if it complies with the following technical characteristics

—Tension levelled aluminium coils

—Hot-rolled coils

—Widths: from 800 mm up to 2050 mm

—Thicknesses: 0,20 mm up to 1,5 mm

—Tolerance on thickness:

—+/- 0,01 mm from thickness 0,20 until 0,50 mm

—+/- ½ norm for thicknesses from 0,51 mm until 1,50 mm

—Tolerance on width: +1,50/-0,00 mm

—Alloys: 5005, 3005, 3105

—Temper: h14, h16, h24, h26

—Max wave height: max. 3 in 1000 mm

3.The exclusions under paragraph 1 indent 2 and 3 and the exemption under paragraph 2 shall be subject to the conditions laid down in the customs provisions of the Union on the end use procedure, in particular Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council^note (the Union Customs Code).

Name	TARIC additional code
Southwest Aluminium (Group) Co., Ltd	C613
Jiangsu Dingsheng New Materials Joint-Stock Co., Ltd	C614
Shanghai Huafon Aluminium Corporation	C615
Alnan Aluminium Inc.	C616
Yinbang Clad Material Co., Ltd.	C617
Jiangsu Metcoplus Industry Intl. Co., Ltd.	C618
Dalishen Aluminum CO.,Ltd	C619
Binzhou Hongbo Aluminium Foil Technology Co., Ltd.	C620
Yong Jie New Material Co., Ltd.	C621
Chalco Ruimin Co., Ltd.	C622
Luoyang Wanji Aluminium Processing Co., Ltd.	C623
Jiangyin Dolphin Pack Limited Company	C624
Henan Xindatong Aluminum Industry Co., Ltd.	C625
Zhejiang Yongjie Aluminum Co., Ltd.	C626
Jiangsu Zhongji Lamination Materials Co., Ltd.	C627
Zhengzhou Guandong Aluminum Industry Co., Ltd.	C628

Commission Implementing Regulation (EU) 2021/582

Article 1 #

Article 2 #

Article 3 #

Article 4 #

Cooperating exporting producers not sampled

History · 2 versions

Connections

Key facts

Article 1 #

Article 2 #

Article 3 #

Article 4 #

Cooperating exporting producers not sampled