Article 2 · Commission Implementing Regulation (EU) 2021/582

Contents

Article 2 #

1.The following products shall be excluded from the product described in Article 1(1):

—Aluminium beverage can body stock, end stock and tab stock.

—Aluminium products, alloyed, of a thickness of not less than 0,2 mm and not more than 6 mm, for use as body panels in the car industry.

—Aluminium products, alloyed, of a thickness of not less than 0,8 mm, for use in the manufacture of aircraft parts.

2.The product described in Article 1(1) shall be exempted from provisional anti-dumping duty if it is imported for use in the production of coated coils and aluminium composite panels and if it complies with the following technical characteristics

—Tension levelled aluminium coils

—Hot-rolled coils

—Widths: from 800 mm up to 2050 mm

—Thicknesses: 0,20 mm up to 1,5 mm

—Tolerance on thickness:

—+/- 0,01 mm from thickness 0,20 until 0,50 mm

—+/- ½ norm for thicknesses from 0,51 mm until 1,50 mm

—Tolerance on width: +1,50/-0,00 mm

—Alloys: 5005, 3005, 3105

—Temper: h14, h16, h24, h26

—Max wave height: max. 3 in 1000 mm

3.The exclusions under paragraph 1 indent 2 and 3 and the exemption under paragraph 2 shall be subject to the conditions laid down in the customs provisions of the Union on the end use procedure, in particular Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council^note (the Union Customs Code).

Article 2#

Article 2 #