Article 1 · Commission Implementing Regulation (EU) 2026/1764

Contents

Article 1 #

Implementing Regulation (EU) 2025/1706 is amended as follows:

(1)the title is replaced by the following:‘Commission Implementing Regulation (EU) 2025/1706 of 25 July 2025 laying down rules, procedures and testing methodologies for the application of Regulation (EU) 2024/1257 as regards exhaust and evaporative emission type-approval, in-vehicle battery durability, electric vehicle range at low temperature and electrified vehicle system power of vehicles of categories M₁ and N₁ and amending Implementing Regulation (EU) 2020/683’;

(2)in Article 1, the introductory wording is replaced by the following:‘This Regulation applies to the emission type-approval with regard to exhaust emissions and evaporative emissions, in-vehicle battery durability, electric vehicle range at low temperature, and electrified vehicle system power of the motor vehicles belonging to the following vehicle categories:’;

(3)in Article 3, paragraph 1 is replaced by the following:‘1.In order to receive an emission type-approval under Regulation (EU) 2024/1257, the manufacturer shall demonstrate that the vehicles comply with the requirements of this Regulation when tested in accordance with the test procedures specified in Annexes III to VIII, X, XI, XIV, XV, XVI, XVII, XIX, XX, XXI and XXII. The manufacturer shall also ensure that the reference fuels comply with the specifications set out in Annex IX.’;

(4)in Article 5(1), the following point (c) is added after point (b):

(c)pure electric vehicles (PEVs).’;

(5)Article 6(3)(c) is deleted;

(6)Article 6(4) is deleted;

(7)in Article 10, the heading is replaced by the following:‘In-service conformity of exhaust emissions and evaporative emissions’;

(8)in Article 10, paragraph 3, the second subparagraph is replaced by the following:‘The requirements for in-service conformity checks are applicable until 10 years after the last Certificate of Conformity or individual approval certificate is issued for vehicles of an in-service conformity family that is subject to testing according to paragraph 9.2.3 of UN Regulation No 83, as defined in paragraph 3 of Annex 4 to UN Regulation No 83.’;

(9)the following Articles 10a, 10b and 10c are inserted:‘Article 10aIn-service conformity of in-vehicle battery durabilityThe in-service conformity for in-vehicle battery durability shall be checked on properly maintained and used vehicles, in accordance with the requirements laid down in Appendix 1 of Annex XV to this Regulation.Article 10bIn-service conformity of electric range at low temperatureThe in-service conformity for electric range of PEVs at low temperature may be checked on properly maintained and used vehicles, in accordance with the requirements laid down in paragraph 9.4.1 of UN Regulation No 83 and Appendix 1 of Annex XVII to this Regulation.Article 10cIn-service conformity of system powerThe in-service conformity for system power may be checked on properly maintained and used vehicles, in accordance with the requirements laid down in paragraph 9.7.1 of UN Regulation No 83 and Appendix 1 of Annex XIX to this Regulation.’;

(10)Annexes I, II, III, XV, XVII, XIX and XXII are amended in accordance with the Annex to this Regulation.

Article 1#

Article 1 #