- actual external diameter
means the external diameter of a disc measured by the Technical Service prior to the test;
- actual test mass
means the mass measured by the Technical Service prior to the test;
- adhesion utilization curve
means the characteristic curve of the braking force ratio without rolling resistance and normal reaction of road surface on a given axle under braking plotted against the braking rate of the vehicle.
- anti-lock braking system
means the part of a service braking system which automatically controls the degree of slip, in the direction of rotation of the wheel, on one or more wheels of the vehicle during braking;
- automatic braking
means braking of the towed vehicle or towed vehicles occurring automatically in the event of separation of any of the vehicles constituting the combination of vehicles, including such separation through coupling breakage, without the effectiveness of the remainder of the combination being affected;
- automatically commanded braking
means a function within a complex electronic control system where actuation of the braking system or brakes of certain axles is made for the purpose of generating vehicle retardation with or without a direct action of the driver, resulting from the automatic evaluation of on board initiated information;
- axle group
means multiple axles where the axle spread between one axle and its adjacent axle is equal to or less than 2,0 m.
- axle load
means the sum of the vertical static forces of the road surface in the contact area on the wheels of the axle;
- brake factor
means the input to output amplification ratio of the brake.
- brake input threshold torque
means the input torque necessary to produce a measurable brake torque;
- braking signal
means a logic signal indicating brake activation.
- braking system
means the combination of parts whose function is progressively to reduce the speed of a moving vehicle or to bring it to a halt, or to keep it stationary if it has already halted;
- combination friction braking system
means a braking system utilising both, the friction and hydrostatic braking effect, where, however, the braking forces are generated by a predominant braking proportion generated by the friction brakes.
- combination hydrostatic braking system
means a braking system utilising both, the hydrostatic and friction braking effect, where, however, the braking forces are generated by a predominant braking proportion generated by the hydrostatic drive.
- continuous braking
means the braking of vehicles constituting a combination of vehicles through an installation having all the following characteristics:
- control device
means the device actuated directly by the driver to supply to the transmission the energy required for braking or controlling it.
- control transmission
means the combination of the components of the transmission which control the operation of the brakes and of the necessary reserve(s) of energy;
- controller
means a component designed to evaluate the data transmitted by the sensor(s) and to transmit a signal to the modulator;
- coupling force control
means a system or function to balance automatically the braking rate of tractor and towed vehicle;
- crawler undercarriage
means a system comprising at least two track rollers, which are spaced a specified distance apart in one plane (in-line) and a continuous metallic or rubber track belt that runs around them;
- declared brake input threshold torque
means the brake input threshold torque declared by the manufacturer and which is representative for the brake;
- declared external diameter
means the external diameter of a disc declared by the manufacturer which is representative external diameter for the disc;
- directly controlled wheel
means a wheel whose braking force is modulated according to data provided at least by its own sensor;
- drawbar towed vehicle
means a towed vehicle of category R or S with at least two axles of which at least one is a steered axle, equipped with a towing device which can move vertically in relation to the towed vehicle and which transmits no significant static vertical load to the tractor;
- effective length of the cam shaft
means the distance from the centre line of the S-cam to the centre line of the operating lever;
- electric control line
means the electrical connection between two vehicles which provides the braking control function to a towed vehicle within a combination;
- electronically controlled braking system
(EBS) means a braking system where the control is generated and processed as an electrical signal in the control transmission and electrical output signals to devices which generate actuating forces produced from stored or generated energy;
- endurance braking system
means an additional braking system having the capability to provide and to maintain a braking effect over a long period of time without a significant reduction in performance, including the control device which may comprise a single device or a combination of several devices each of which may have its own control;
- energy source
means a device that provides the energy required to actuate the brakes, either directly or indirectly through an energy storage device;
- energy storage device
means a device that stores the energy provided by the energy source to apply or release the brakes.
- energy transmission
means the combination of the components which supply to the brakes the necessary energy for their function;
- engine brake
means a brake where forces are derived from a controlled increase in the braking action of the engine transmitted to the wheels;
- fluid brake
means a brake where forces are generated by the action of a fluid situated between two parts of the vehicle moving relatively to one another;
- friction brake
means a brake where forces are generated by the friction between two parts of the vehicle moving relatively to one another;
- friction braking system
means a braking system where the braking forces are generated only by the friction brakes without taking into account of the braking effect of the hydrostatic braking system;
- full cycling
means that the anti-lock braking system is repeatedly modulating the brake force to prevent the directly controlled wheels from locking and excluding brake applications where modulation only occurs once during the stop;
- full force
means the maximum force laid down in the braking tests and performance of braking systems according to this Regulation.
- graduated braking
means braking which, within the normal range of operation of the equipment, during either the application or the releasing of the brakes, fulfils all the following conditions:
- graduated hydrostatic braking
means the hydrostatic braking through which the driver is able to increase or decrease the vehicle speed at any time by a progressive action on its control device.
- hydraulic connection of the single line type
means the connection of the brakes between the tractor and the towed vehicle through a single line of hydraulic fluid;
- hydraulic or pneumatic braking system with stored energy
means a braking system where energy is supplied by a hydraulic fluid or air under pressure, stored in one or more energy storage devices fed from one or more pressure pumps or compressor(s) each fitted with a means of limiting the pressure to a maximum value (specified by the manufacturer).
- hydrostatic braking system
means a braking system (either as a service and/or secondary braking system) that only uses the braking power of the hydrostatic drive;
- hydrostatic drive
means a type of vehicle propulsion which uses a hydrostatic transmission, with open or closed circuit, in which fluid circulates as the energy medium between one or more hydraulic pumps and one or more hydraulic motors;
- identical
means parts having identical geometric and mechanical characteristics and the materials used for the components of the vehicles;
- inch device
means the device that affects the speed of the vehicle independently of the hydrostatic drive control.
- indirectly controlled wheel
means a wheel whose braking force is modulated according to data provided by the sensor(s) of other wheel(s);
- inertia braking
means braking by utilising the forces generated by the towed vehicle's moving up on the tractor;
- integrated endurance braking system
means an endurance braking system whose control device is integrated with that of the service braking system in such a way that both endurance and service braking systems are applied simultaneously or suitably phased by operation of the combined control device;
- laden vehicle
means a vehicle loaded at its technically permissible maximum laden mass;
- maximum stationary axle load
means the stationary axle load achieved under the condition of the technically permissible maximum laden mass of the vehicle;
- maximum stationary wheel load
means the stationary wheel load achieved under the condition of the technically permissible maximum laden mass of the vehicle;
- mechanical brake-cylinder locking device
means a device which ensures braking operation of the parking braking system by mechanically locking the brake piston rod.
- modulator
means a component designed to vary the braking force(s) in accordance with the signal received from the controller;
- nominal demand value
means a characteristic of coupling force control that relates the coupling head signal to the braking rate and which can be demonstrated at type-approval, within the limits of the compatibility bands of Appendix 1 of Annex II.
- nominal external diameter
means the external diameter which the manufacturer specifies for the disc on which the relevant test is carried out by the Technical Service;
- nominal test mass
means the mass of a disc or drum which the manufacturer specifies for the disc or drum, respectively, with which the relevant test is carried out by the Technical Service;
- non-disengageable transmission
means the transmission for which either pressure or force or torque are continuously transmitted at any time during travelling of the vehicle in the drive train between the vehicle engine and the wheels and in the braking system between the brake control device and the wheels;
- parking braking system
means a system that enables the vehicle to be held stationary on an up or down gradient even in the absence of the driver;
- point-to-point
means a topology of a communication network with only two units.
- pressure
means negative pressure if the compression of the springs is obtained by means of a vacuum device.
- reference axle
means an axle for which there is a test report;
- reference brake
means a brake for which there is a test report;
- rigid drawbar towed vehicle
means a towed vehicle of category R or S with one axle or one group of axles, fitted with a drawbar which transmits a significant static load to the tractor due to its construction, and which does not meet the definition of a centre-axle towed vehicle;
- selective braking
means a function within a complex electronic control system where actuation of individual brakes is made by automatic means and where vehicle retardation is secondary to vehicle behaviour modification;
- semi-continuous braking
means the braking of vehicles constituting a combination of vehicles through an installation having all the following characteristics:
- sensor
means a component designed to identify and transmit to the controller the conditions of rotation of the wheel(s) or the dynamic conditions of the vehicle;
- service brake control device
means the control device by whose operation the prescribed service braking performance is attained;
- service braking system
means the braking system that enables the driver to control the movement of the vehicle and to halt it safely, speedily and effectively, for all the range of speed and load that the vehicle is approved to operate, on any up or down gradient;
- spring braking systems
means braking systems for which the energy required for braking is supplied by one or more springs acting as an energy storage device;
- spring compression chamber
means the chamber where the pressure variation that induces the compression of the spring is actually produced;
- subject towed vehicle
means a towed vehicle representative of the towed vehicle type for which type-approval is sought;
- towed vehicle
means a trailer as defined in Article 3(9) of Regulation (EU) No 167/2013 or an interchangeable towed equipment as defined in Article 3(10) of that Regulation;
- track belt
means a continuous flexible belt, which can absorb longitudinal tractive forces.
- track rollers
means the system that transmits the weight of the vehicle and crawler undercarriage to the ground via the track belt, transmits torque from the vehicle's drive system to the track belt and may produce a change of direction of the moving belt;
- transmission
means the combination of components comprised between the control device and the brake, excluding the control lines, supply lines and supplementary lines between tractors and towed vehicles, and linking them functionally through mechanical, hydraulic, pneumatic or electric means or through the use of a combination of those means;
- wheel load
means the vertical static force of the road surface in the contact area on the wheel;