Commission Implementing Regulation (EU) No 1112/2014

Contents

THE EUROPEAN COMMISSION,Having regard to the Treaty on the Functioning of the European Union,Having regard to Directive 2013/30/EU of the European Parliament and of the Council of 12 June 2013 on safety of offshore oil and gas operations and amending Directive 2004/35/EC^note, and in particular Articles 23(2) and 24(2) thereof,Whereas:

(1)Member States are required to ensure that operators and owners of offshore oil and gas installations provide the competent authority, as a minimum, with the data on major hazard indicators as specified in Annex IX to Directive 2013/30/EU. That information should enable Member States to provide advanced warning of the potential deterioration of safety and environmentally critical barriers, and should enable them to take preventive action, including in light of their obligations under Directive 2008/56/EC of the European Parliament and the Council (Marine Strategy Framework Directive)^note.

(2)The information should also demonstrate the overall effectiveness of measures and controls implemented by individual operators and owners, and the industry as a whole, to prevent major accidents and to minimise risks for the environment. In addition, the information and data provided should ensure that the performance of individual operators and owners can be compared within the Member State and the performance of the industry as a whole can be compared between Member States.

(3)The sharing of comparable data between Member States is rendered difficult and unreliable due to the lack of a common data reporting format across all Member States. A common format for the reporting of data by operators and owners to the Member State should provide transparency of the safety and environmental performance of operators and owners and should provide Union-wide comparable information on safety of offshore oil and gas operations and should facilitate dissemination of lessons learned from major accidents and near misses.

(4)To facilitate public confidence in the authority and integrity of offshore oil and gas operations in the Union, Member States should periodically publish the information referred to in point 2 of Annex IX of Directive 2013/30/EU pursuant to Article 24 of Directive 2013/30/EU. A common format and details of information to be made publicly available by the Member States should enable easy cross-border comparison of data.

(5)The measures provided for in this Regulation are in accordance with the opinion of the Advisory Committee on Safety of Offshore Oil and Gas Operations,

HAS ADOPTED THIS REGULATION:

Article 1Subject matter and scope#

This Regulation specifies common formats in relation to:

(a)reports from operators and owners of offshore oil and gas installations to competent authorities of Member States in accordance with Article 23 of Directive 2013/30/EU;

(b)publication of information by Member States in accordance with Article 24 of Directive 2013/30/EU.

Article 2Reporting reference and remittance dates#

1.Operators and owners of offshore oil and gas installations shall submit the report referred to in Article 1(a) within 10 working days of the event.

2.The reporting period for information referred to in Article 1(b) shall be each year from 1 January until 31 December, starting as of the calendar year 2016. The common publication format shall be used to publish the information required in Article 24 of Directive 2013/30/EU on the website of the competent authority not later than 1 June of the year following the reporting period

3.The formats set out in Annexes I and II shall be used for the reports and publication referred to in points (a) and (b) of Article 1 respectively.

Article 3Details of information to be shared#

Annex I sets out the details of information to be shared in accordance with point 2 of Annex IX of Directive 2013/30/EU.

Article 4Entry into force#

This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.

Annex I · Common data reporting format for incidents and major accidents in the offshore oil and gas industry(As required by Article 23 of Directive 2013/30/EU)

General remarks on the details of information to be shared

a.The details of information to be shared are in relation to point 2 of Annex IX to Directive 2013/30/EU on the safety of offshore oil and gas operations and in particular to the risk of a major accident as defined within that Directive.

b.Annex IX, point 2, to Directive 2013/30/EUcontains leading and lagging key performance indicators (KPI's) in order to provide a good picture about offshore oil and gas safety within a Member State and in the European Union, but some of the KPI's have a warning function like failures of safety and environmental critical elements (SECE) and fatalities.

c.Pursuant to Article 3, paragraph 4, of the Council Directive 92/91/EEC^note, the employer shall, without delay, report to the competent authorities any serious and/or fatal occupational accidents and situations of serious danger. This data shall be used by the competent authority to report the information required under Annex IX, point 2, letters (g) and (h) of Directive 2013/30/EU.

Event date and time(a) Event date: (dd/mm/yyyy)(b) Event time: (hh:mm)Details of the location and of the person reporting the eventOperator/ownerName/type of the installation:Field name/code (if relevant):Name of the reporting person:Role of the reporting personContact details:Telephone number:E-mail address:Event categorisation (2)What type of event is being reported? (More than one option might be chosen)A.Unintended release of oil, gas or other hazardous substances, whether or not ignited:1. Any unintentional release of ignited gas or oil on or from an offshore installation;2. The unintentional release on or from an offshore installation of;(a) not ignited natural gas or evaporated associated gas if mass released ≥ 1 kg(b) not ignited liquid of petroleum hydrocarbon if mass released ≥ 60 kg;3. The unintentional release or escape of any hazardous substance, for which the major accident risk has been assessed in the report on major hazards, on or from an offshore installation, including wells and returns of drilling additives.B.Loss of well control requiring actuation of well control equipment, or failure of a well barrier requiring its replacement or repair:1. Any blowout, regardless of the duration2. The coming into operation of a blowout prevention or diverter system to control flow of well-fluids;3. The mechanical failure of any part of a well, whose purpose is to prevent or limit the effect of the unintentional release of fluids from a well or a reservoir being drawn on by a well, or whose failure would cause or contribute to such a release.4. The taking of precautionary measures additional to any already contained in the original drilling programme where a planned minimum separation distance between adjacent wells was not maintained.(2) According to Annex IX of Directive 2013/30/EU.

C.Failure of a safety and environmental critical element:Any loss or non-availability of a SECE requiring immediate remedial action.D.Significant loss of structural integrity, or loss of protection against the effects of fire or explosion, or loss of station keeping in relation to a mobile installation:Any detected condition that reduces the designed structural integrity of the installation, including stability, buoyancy and station keeping, to the extent that it requires immediate remedial action.E.Vessels on collision course and actual vessel collisions with an offshore installation:Any collision, or potential collision, between a vessel and an offshore installation which has, or would have, enough energy to cause sufficient damage to the installation and/or vessel, to jeopardise the overall structural or process integrity.F.Helicopter accidents, on or near offshore installations:Any collision, or potential collision, between a helicopter and an offshore installation.G.Any fatal accident to be reported under the requirements of Directive 92/91/EECH.Any serious injuries to five or more persons in the same accident to be reported under the requirements of Directive 92/91/EECI.Any evacuation of personnel:Any unplanned emergency evacuation of part of or all personnel as a result of, or where there is a significant risk of a major accidentJ.A major environmental incident:Any major environmental incident as defined in Article 2.1.d and Article 2.37 of Directive 2013/30/EURemarks:If the incident falls into one of the abovementioned categories, the operator/owner shall proceed to the relevant section(s), hence a single incident could result in completing multiple sections. The operator/owner shall submit the filled in sections to the competent authority within 10 working days of the event, using the best information available at that time. If the event reported is a major accident, the Member State shall initiate a thorough investigation in accordance with Article 26 of Directive 2013/30/EU.Fatalities and serious injuries are reported under the requirements of Directive 92/91/EEC.Helicopter incidents are reported under CAA regulations. If a helicopter accident occurs in relation to Directive 2013/30/EU, section F shall be completed.Taking into account Member States’ obligations to maintain or achieve Good Environmental Status under Directive 2008/56/EC (3), if an unintended release of oil, gas or other hazardous substance, or the failure of a safety and environmental critical element results in or is likely to result in degradation of the environment, such impacts should be reported to the competent authorities.(3) Directive 2008/56/EC of the European Parliament and of the Council of 17 June 2008 establishing a framework for community action in the field of marine environmental policy (Marine Strategy Framework Directive) (OJ L 164, 25.6.2008, p. 19).

SECTION AUNINTENDED RELEASE OF OIL, GAS OR OTHER HAZARDOUS SUBSTANCES, WHETHER OR NOT IGNITEDA.1. Was there a release of hydrocarbon substances? Yes NoIf yes, fill in the following sections.I. Hydrocarbon (HC) released: (Tick appropriate box)NON PROCESS: (Specify)PROCESS: Oil Condensate Gas 2-PhaseFor gas or 2-Phase, state level of H2S: (estimated ppm)II. Estimated quantity released:(Specify units, e.g. tonnes, kg, Nm3)III. Estimated initial release rate:(Specify units, e.g. tonnes/day, kg/s, Nm3/s)IV. Duration of leak: (seconds/minutes/hours)(Estimated time from discovery, e.g. alarm, electronic log, to termination of leak)V. Location of leak:VI. Hazardous area classification: (i.e. zone at location of incident)(Tick appropriate box) 1 2 UnclassifiedVII. Module ventilation? Natural ForcedHow many sides enclosed?(Insert the number of walls, including floor and ceiling)Module volume: (m3)Estimated number of air changes (if known):Specify hourly rateVIII. Weather conditions:Wind speed: Wind direction:(Specify units, e.g. mph, m/s, ft/s) (Specify heading in degrees)Provide a description of other relevant weather conditions:

IX. System pressure:Design Pressure: Actual Pressure:(Specify units, e.g. bar, psi or other) (i.e. at time of release)X. Means of detection: (Please tick type of detector or specify as appropriate)FireGasSmokeOtherXI. Cause of leak: (Please give a short description and complete the ‘Cause’ checklist below)XII. Did ignition occur? (Please tick appropriate box)Yes NoIf yes, was it: Immediate: Delayed: Delay time: (sec)Was there: (add sequence of events by numbering appropriate boxes in order of occurrence)A flash fireAn explosionA jet fireA pool fireXIII. Ignition source (if known)Provide a description of the ignition source.XIV. What emergency action was taken? (Please tick appropriate box)ShutdownAutomaticManualBlowdownAutomaticManualDelugeAutomaticManualCO2/Halon/inertsAutomaticManualCall to musterAt stationsAt lifeboatsOther, specifyXV. Any additional comments:

CAUSE OF LEAK CHECKLIST (See point A.1.XI ‘Cause of leak’)(Please indicate those items which come nearest to pinpointing the cause of the leak)Indicate the cause(s) of the release.From each of the following categories tick the appropriate boxes.(a) Design:Failure related to design(b) Equipment:Internal corrosionExternal corrosionMechanical failure due to fatigueMechanical failure due to wear outErosionMaterial defectOther, specify:(c) Operation:Incorrectly fittedLeft openImproper inspectionImproper testingImproper operationImproper maintenanceDropped objectOther impactOpened when containing HCOther, specify:(d) Procedural:Non-compliance with procedureNon-compliance with permit-to-workDeficient procedureOther, specify:Indicate the operational mode in the area at the time of release:Choose one parameter from the following categories, and tick the appropriate boxes.Operational mode in the area at the time of release:Drilling:Well operations (specify actual operation, e.g. wire line, well test, etc.):ProductionMaintenanceConstructionPipeline operations including pigging

A.2. Description of circumstances, consequences of event and emergency responseA.2.1 Was there a release of a non–hydrocarbon hazardous substance?Yes NoIf yes, specify the type and quantity of released substance:(Type) (Quantity, specify units)A.2.2 Was there a non-hydrocarbon fire (e.g. electrical) with a significant potential to cause a major accident?Yes NoDescribe circumstances:A.2.3 Is the incident likely to cause degradation to the surrounding marine environment?Yes NoIf yes, outline the environmental impacts which have already been observed or are likely to result from the incident:A.3. Preliminary direct and underlying causes (within 10 working days of the event)A.4. Initial lessons learned and preliminary recommendations to prevent recurrence of similar events (within 10 working days of the event)The competent authority shall further complete this section.Is this considered to be a major incident?yesnoGive justification:END OF THE REPORT

SECTION BLOSS OF WELL CONTROL REQUIRING ACTUATION OF WELL CONTROL EQUIPMENT, OR FAILURE OF A WELL BARRIER REQUIRING ITS REPLACEMENT OR REPAIR.B.1. General information(a) Name/code of well:(b) Name of drilling contractor (if relevant):(c) Name/type of drilling rig (if relevant):(d) Start and end date/time of loss of well control:(e) Type of fluid: brine / oil / gas / (if relevant)(f) Well head completion: surface / subsea:(g) Water depth (m):(h) Reservoir: pressure / temperature/depth(i) Type of activity: normal production/drilling / work over / well services(j) Type of well services (if applicable): wire line / coiled tubing / snubbing / …B.2. Description of circumstances, consequences of event and emergency responseBlowout prevention equipment activated:yesnoDiverter system in operation:yesnoPressure build-up and/or positive flow check:yesnoFailing well barriers(a)(b)(c)Description of circumstancesFurther Details (specify units)Duration of uncontrolled flow of well-fluids:Flowrate:Liquid volume:Gas volume:Consequences of event and emergency response(E.g.; 1. jet fire/ 2. first explosion / 3. second explosion, etc.)

B.3. Preliminary direct and underlying causes (within 10 working days of the event)B.4. Initial lessons learned and preliminary recommendations to prevent recurrence of similar events (within 10 working days of the event).The competent authority shall further complete this section.Is this considered to be a major incident?yesnoGive justification:END OF THE REPORT

SECTION CFAILURE OF A SAFETY AND ENVIRONMENTAL CRITICAL ELEMENTC.1. General information(a) Name of the independent verifier (if applicable):C.2. Description of circumstances, consequences of event and emergency responseC.2.1. Description of SECE and circumstancesWhich Safety and Environmental Critical systems were reported by the independent verifier as lost or unavailable, requiring immediate remedial action, or have failed during an incident?Origin: Report Independent verifier: details (report nr. / date / verifier / )Failure during major accident: details (date / accident description / )Safety and Environmental Critical elements concerned(a) Structural integrity systemsTopside structuresSubsea structuresCranes & lifting equipmentMooring systems (anchorline, dynamic positioning)Other, specify:(b) Process containment systemsPrimary well barrierSecondary well barrierWireline equipmentMud processingSand filtersPipelines & risersPiping systemPressure vesselsOther, specify:Well control process equipment - BOP(c) Ignition control systemsHazardous area ventilationNon-hazardous area ventil.ATEX certified equipmentElectrical tripping equipmentEarthing/bonding equipmentInert Gas systemOther, specify:(d) Detection systemsFire & gas detectionChemical injection monitorSandOther, specify:(e) Process containment relief systemsWell control process equipment — diverterRelief systemsGas tight floorsOther, specify:

(f) Protection systemsDelugeHelideck foam systemFire water pumpsFirewater systemPassive fire protection systemFire/blast wallsCO2 / Halon fire-fighting systemOther, specify:(g) Shutdown systemsLocal shutdown system (LSD)Process shutdown system (PSD)Emergency shutdown system (ESD)Subsea isolation valve (SSIV)Riser ESD valveTopsides ESD valveBlowdownOther, specify:(h) Navigational aidsAircraft navig. aidsSeacraft navig. aidsOther, specify:(i) Rotating equipment — power supplyTurbine P.M. for compressorTurbine P.M. for generatorOther, specify:(j) Escape, evacuation and rescue equipmentPersonal safety equipmentLifeboats / TEMPSCTertiary escape means (lifecraft)Temporary refuge/Muster areaSearch & rescue facilitiesOther, specify:(k) Communication systemsRadios / telephonesPublic addressOther, specify:(l) Other, specifyC.2.2. Description of consequencesIs the incident likely to cause degradation to the surrounding marine environment?Yes NoIf yes, outline the environmental impacts which have already been observed or are likely to result from the incident.C.3. Preliminary direct and underlying causes (within 10 working days of the event)C.4. Initial lessons learned and preliminary recommendations to prevent recurrence of similar events (within 10 working days of the event).Describe any important lessons learned from the event. List recommendations to prevent the recurrence of similar events.The competent authority shall further complete this section.Is this considered to be a major incident?yesnoGive justification:END OF THE REPORT

SECTION DSIGNIFICANT LOSS OF STRUCTURAL INTEGRITY, OR LOSS OF PROTECTION AGAINST THE EFFECTS OF FIRE OR EXPLOSION, OR LOSS OF STATION KEEPING IN RELATION TO A MOBILE INSTALLATIOND.1. General information(a) Name of vessel (if applicable)D.2. Description of circumstances, consequences of event and emergency responseIndicate the system that failed and provide a description of the circumstances of the event / describe what has happened including weather conditions and sea stateD.3. Preliminary direct and underlying cause (within 10 working days of the event)D.4. Initial lessons learned and preliminary recommendations to prevent recurrence of similar events (within 10 working days of the event)The competent authority shall further complete this section.Is this considered to be a major incident?yesnoGive justification:END OF THE REPORT

SECTION EVESSELS ON COLLISION COURSE AND ACTUAL VESSEL COLLISIONS WITH AN OFFSHORE INSTALLATIONE.1. General information(a) Name/ Flag State of vessel (*):(b) Type/tonnage of vessel (*):(c) Contact via AIS?:(*) If applicableE.2. Description of circumstances, consequences of event and emergency responseIndicate the system that failed and provide a description of the circumstances of the event / describe what has happened (minimum distance between vessel and installation, course and speed of vessel, weather condition)E.3. Preliminary direct and underlying causes (within 10 working days of the event)E.4. Initial lessons learned and preliminary recommendations to prevent recurrence of similar events (within 10 working days of the event)The competent authority shall further complete this section. Is this considered to be a major incident?yesnoGive justification:END OF THE REPORT

SECTION FHELICOPTER ACCIDENTS, ON OR NEAR OFFSHORE INSTALLATIONSHelicopter incidents are reported under CAA regulations. If a helicopter accident occurs in relation to Directive 2013/30/EU, section F shall be completed.F.1. General information(a) Name of helicopter contractor:(b) Helicopter type:(c) Number of persons on board:F.2. Description of circumstances, consequences of event and emergency responseIndicate the system that failed and provide a description of the circumstances of the event / describe what has happened (weather conditions)F.3. Preliminary direct and underlying causes (within 10 working days of the event)F.4. Initial lessons learned and preliminary recommendations to prevent recurrence of similar events (within 10 working days of the event)The competent authority shall further complete this section. Is this considered to be a major incident?yesnoGive justification:END OF THE REPORTSections G and H shall be reported under the requirements of Directive 92/91/EEC.

SECTION IANY EVACUATION OF PERSONNELI.1. General informationStart and end date/time of evacuation:I.2. Description of circumstances, consequences of event and emergency responseWas the evacuation precautionary or emergency?Precautionary Emergency BothNumber of persons evacuated:Means of evacuation: (e.g. helicopter)Indicate the system that failed and provide a description of the circumstances of the event / describe what has happened, unless already reported in a previous section of this report.I.3. Preliminary direct and underlying causes (within 10 working days of the event)I.4. Initial lessons learned and preliminary recommendations to prevent recurrence of similar events (within 10 working days of the event)END OF THE REPORT

SECTION JA MAJOR ENVIRONMENTAL INCIDENTJ.1. General information(a) Name of contractor (if applicable)J.2. Description of circumstances, consequences of event and emergency responseIndicate the system that failed and provide a description of the circumstances of the event / describe what has happened. What are or are likely to be the significant adverse effects on the environment?J.3. Preliminary direct and underlying causes (within 10 working days of the event)J.4. Initial lessons learned and preliminary recommendations to prevent recurrence of similar events (within 10 working days of the event)END OF THE REPORT

Annex II · Common Publication Format(As required by article 24 of Directive 2013/30/EU)

SECTION 1PROFILEInformation on Member State and Reporting Authority(a) Member State:(b) Reporting period: (Calendar Year)(c) Competent authority:(d) Designated Reporting Authority:(e) Contact detailsTelephone number:E-mail address:SECTION 2INSTALLATIONS2.1. Fixed installations: Please provide detailed list of installations for offshore oil and gas operations in your country (on first of January of the reported year), including their type (i.e. fixed manned, fixed normally unmanned, floating production, fixed non-production), year of installation and location:Table 2.1Installations within jurisdiction on 1 January of the reporting periodName or IDType of installation, i.e.Fixed manned installation (FMI);(Fixed) normally unmanned (NUI);Floating production install. (FPI)Fixed non-production install. (FNP)Year of installationType of fluid, i.e.Oil; Gas; Condensate; Oil/Gas; Oil/CondensateNumber of bedsCoordinates(longitude-latitude)

2.2. Changes since the previous reporting year(a) New fixed installations: Please report the new fixed installations, entered in operation during the reporting period:Table 2.2.a.New fixed installations entered in operation during the reporting periodName or IDType of installation, i.eFixed manned installation (FMI);(Fixed) normally unmanned (NUI);Floating production install. (FPI)Fixed non-production install. (FNP)Year of installationType of fluid, i.e.Oil; Gas; Condensate; Oil/Gas; Oil/CondensateNumber of bedsCoordinates(longitude-latitude)(b) Fixed Installations out of operation: Please report the installations that went out of offshore oil and gas operations during the reporting period:Table 2.2.b.Installations that were decommissioned during the reporting periodName or IDType of installation, i.e(Fixed attended;Fixed normally unattended;Floating production installation;Fixed non-production installation.)Year of installationCoordinates(longitude-latitude)Temporary / Permanent2.3. Mobile installations: Please report the mobile installations carrying out operations during the reporting period (MODUs and other non-production installations):Table 2.3Mobile InstallationsName or IDType of installation, i.eMobile offshore drilling;Other mobile non-productionYear ofconstructionNumber of bedsGeographical area of operations (e.g. South North Sea, North Adriatic); and DurationArea 1Duration(months)Area 2Duration(months)

2.4. Information for data normalisation (1) purposes. Please provide the total number of actual offshore working hours and the total production in the reporting period:(a) Total number of actual offshore working hours for all installations:(b) Total production, in kTOE:Oil Production (specify units):Gas Production (specify units):(1) For the purpose of this Implementing Regulation, normalisation means a transformation applied uniformly to each element in a set of data so that the set has some specific statistical property. For example, a number of reported events (i.e. loss of well control) might be normalised by dividing each one by the total number of wells in that Member State.

SECTION 3REGULATORY FUNCTIONS AND FRAMEWORK3.1. InspectionsNumber and offshore inspections performed during the reporting period.Number of offshore inspectionsMan-days spent on installation (travel time not included)Number of inspected installations3.2. InvestigationsNumber and type of investigations performed during the reporting period.(a) Major accidents:(pursuant to Article 26 of Directive 2013/30/EU):(b) Safety and environmental concerns:(pursuant to Article 22 of Directive 2013/30/EU):3.3. Enforcement actionsMain enforcement actions or convictions performed in the reporting period pursuant to Article 18 of Directive 2013/30/EU:Narrative:3.4. Major changes in the offshore regulatory frameworkPlease describe any major changes in the offshore regulatory framework during the reporting period.(include e.g. rationale, description, expected outcome, references)

SECTION 4INCIDENT DATA AND PERFORMANCE OF OFFSHORE OPERATIONS4.1. Incident dataNumber of reportable events pursuant to Annex IX:of which identified to be major accidents:4.2. Annex IX Incident CategoriesAnnex IX categoriesNumber of eventsNormalized number of events(a) Unintended releasesIgnited oil/gas releases — FiresIgnited oil/gas releases — ExplosionsNot ignited gas releasesNot ignited oil releasesHazardous substances released(b) Loss of well controlBlowoutsActivation of BOP / diverter systemFailure of a well barrier(c) Failure of SECE’s(d) Loss of structural integrityLoss of structural integrityLoss of stability/buoyancyLoss of station keeping(e) Vessel collisions(f) Helicopter accidents(g) Fatal accidents (*)(h) Serious injuries to 5 or more persons in the same accident (*)(i) Evacuations of personnel(j) Environmental accidents(*) Only if related to a major accident.4.3. Total number of fatalities and injuries (**)NumberNormalized valueTotal number of fatalitiesTotal number of serious injuriesTotal number of injuries(**) A total number as reported pursuant to 92/91/EEC.

4.4. Failures of Safety and Environmental Critical Elements (SECEs)SECENumber related to major accidents(a) Structural integrity systems(b) Process containment systems(c) Ignition control systems(d) Detection systems(e) Process containment relief systems(f) Protection systems(g) Shutdown systems(h) Navigational aids(i) Rotating equipment — power supply(j) Escape, evacuation and rescue equipment(k) Communication systems(l) other4.5. Direct and Underlying causes of major incidentsCausesNumber of incidentsCausesNumber of incidents(a) Equipment-related causes(c) Procedural / organisational errorDesign failureInadequate risk Assessment/perceptionInternal corrosionInadequate instruction/procedureExternal corrosionNon-compliance with procedureMechanical failure due to fatigueNon-compliance with permit-to-workMechanical failure due to wear-outInadequate communicationMechanical failure due to defected materialInadequate personnel competenceMechanical failure (vessel/helicopter)Inadequate supervisionInstrument failureInadequate safety leadershipControl system failureOtherOther(b) Human error – operational failure(d) Weather-related causesOperation errorWind in excess of limits of designMaintenance errorWave in excess of limits of designTesting errorExtremely low visibility in excess of system designInspection errorPresence of ice/icebergsDesign errorOtherOther

4.6. Which are the most important lessons learned from the incidents that deserve to be shared?Narrative:END OF THE REPORT

Article 1Subject matter and scope#

Article 2Reporting reference and remittance dates#

Article 3Details of information to be shared#

Article 4Entry into force#

Annex I · Common data reporting format for incidents and major accidents in the offshore oil and gas industry(As required by Article 23 of Directive 2013/30/EU)

General remarks on the details of information to be shared

Annex II · Common Publication Format(As required by article 24 of Directive 2013/30/EU)

Key facts

Article 1Subject matter and scope#

Article 2Reporting reference and remittance dates#

Article 3Details of information to be shared#

Article 4Entry into force#

Annex I · Common data reporting format for incidents and major accidents in the offshore oil and gas industry(As required by Article 23 of Directive 2013/30/EU)

General remarks on the details of information to be shared

Annex II · Common Publication Format(As required by article 24 of Directive 2013/30/EU)