shall mean any arrangement for refund or remission, partial or complete, of customs duties applicable to products used in manufacture, provided that the said provision concedes, expressly or in effect, this repayment or non-charging or the non-imposition when goods obtained from the said products are exported but not when they are retained for home use.
shall mean the price paid to the manufacturer in whose undertaking the last working or processing is carried out, provided that the price includes the value of all the products used in manufacture.
shall mean the duty applied on 1 January 1973 in Denmark, Norway, the United Kingdom or Iceland to the products referred to in Article 25 (1) or the duty which, in accordance with the provisions of the Agreement, will be subsequently applied to the said products whenever this duty is lower than that applied to other products originating in the Community or in Iceland.
THE COUNCIL OF THE EUROPEAN COMMUNITIES,Having regard to the Treaty establishing the European Economic Community, and in particular Article 113 thereof,Having regard to the proposal from the Commission,
Whereas the Agreement between the European Economic Community and the Republic of Iceland signed in Brussels on 22 July 1972 should be concluded and the Declarations annexed to the Final Act, likewise signed in Brussels on 22 July 1972, should be adopted;
Whereas, since the Agreement establishes a Joint Committee, representatives of the Community on this Committee should be appointed;
The Agreement between the European Economic Community and the Republic of Iceland, the Annexes and Protocols thereto, and the Declarations annexed to the Final Act are hereby concluded, adopted and confirmed on behalf of the Community.The texts of the Agreement and of the Final Act are annexed to this Regulation.
Pursuant to Article 37 of the Agreement, the President of the Council of the European Communities shall give notification that the procedures necessary for the entry into force of the Agreement have been completed on the part of the Community.
Within the Joint Committee provided in Article 30 of the Agreement, the Community shall be represented by the Commission, assisted by the representatives of the Member States.
List of products referred to in Article 2 of the Agreement
Brussels Nomenclature heading No
Description
35.02
Albumins, albuminates and other albumin derivatives:A. Albumins: II.other:(a)Ovalbumin and lactalbumin:1.dried (for example, in sheets, scales, flakes, powder)2.other
45.01
Natural cork, unworked, crushed, granulated or ground; waste cork
54 01
Flax, raw or processed but not spun: flax tow and waste (including pulled or garnetted rags)
57 01
True hemp (‘Cannabis sativa’), raw or processed but not spun; tow and waste of true hemp (including pulled or garnetted rags or ropes)
(a)which are registered or recorded in a Member State of the Community or in Iceland;
(b)which sail under the flag of a Member State of the Community or of Iceland;
(c)which are at least 50 % owned by nationals of Member States of the Community or of Iceland or by a company with its head office in one of those States, of which the manager or managers, chairman of the board of directors or of the supervisory board, and the majority of the members of such boards are nationals of the Member States of the Community or of Iceland, and of which, in addition, in the case of partnerships or limited companies, at least half the capital belongs to those States or to public bodies or nationals of the said States;
(d)of which the captain and officers are all nationals of the Member States of the Community or of Iceland;
(e)of which at least 75 % of the crew are nationals of the Member States of the Community or of Iceland.
(i)either of the provisions of the last sentence of Article 1 (2) (b) for products of the Community as originally constituted and of Ireland that have been worked or processed in Iceland;
(ii)or of any provisions corresponding to this sentence contained in the agreements referred to in Article 2 for products of the Community as originally constituted and of Ireland that are worked or processed in any of the five countries.
Working or processing that does not confer the status of originating products
Working or processing that confers the status of originating products when the following conditions are met
Customs Tariff heading No
Description
ex 03.02
Livers and roes of fish
Manufacture from products of Chapter 3
15.04
Fats and oils, of fish and marine mammals, whether or not refined
Manufacture from products of Chapter 3
ex 16.04
Prepared or preserved fish, including caviar and caviar subsitutes, excluding salmonidae, sardines, runny, bonits, mackerel and anchovies
Manufacture from products of Chapter 3
16.05
Crustaceans and molluscs, prepared or preserved
Manufacture from products of Chapter 3
ex 17.04
Sugar confectionery, not containing cocoa, excluding liquorice extract containing more than 10 % by weight of sucrose but not containing other added substances
Manufacture from other products of Chapter 17 the value of which exceeds 30 % of the value of the finished product
ex 18.06
Chocolate and other food preparations containing cocoa, excluding products other than cocoa powder, not otherwise sweetened than by the addition of sucrose, ice-cream (not including ice-cream powder) and other ices, chocolate and chocolate goods, whether or not filled and sugar confectionery and substitutes therefor made from sugar substitution products, containing cocoa, in immediate packings of a net capacity of more than 500 g.
Working or processing that confers the status of originating products
Customs Tariff Heading No
Description
Incorporation of non-originating materials and parts in boilers, machinery, mechanical appliances etc. of Chapters 84 to 92 and in boilers and radiators of heading No 73.37 does not make such products lose their status of originating products, provided that the value of these products, parts and pieces does not exceed 5 % of the value of the finished product
ex 25.09
Earth colours, calcined or powdered
Crushing and calcination or powdering of earth colours
ex 25.15
Marble squared by sawing, of a thickness not exceeding 25 cm
Sawing into slabs or sections, polishing, grinding and cleaning of marble, including, marble not further worked than roughly split, roughly squared or squared by sawing, of a thickness exceeding 25 cm
ex 25.16
Granite, porphyry, basalt, sandstone and other monumental and building stone, squared by sawing, of a thickness not exceeding 25 cm
Sawing of granite, porphyry, basalt, sandstone and other building stone, including such stone not further worked than roughly split, roughly squared or squared by sawing, of a thickness exceeding 25 cm
Assimilated aromatic oils as defined in Note 2 to Chapter 27, of which more than 65 % by volume distils at a temperature of up to 250oC (including mixtures of petroleum spirit and benzole), for use as power or heating fuels
27.09 to 27.16
Mineral oils and products of their distillation; bituminous substances; mineral waxes
ex 29.01
Hydrocarbons:acycliccyclanes and cyclenes, excluding azulenesbenzene, toluene, xylenesfor use as power or heating fuels
ex 34.03
Lubricating preparations containing petroleum oils or oils obtained from bituminous minerals, but not including preparations containing 70 % or more by weight of petroleum oils or of oils obtained from bituminous minerals
ex 34.04
Waxes with a basis of paraffin, of petroleum waxes, of waxes obtained from bituminous minerals, of slack wax or of scale wax
EEC-ICELAND AGREEMENTExporter (Name, full address, country)A.IS.1 NoA.000.000Consignee (Name, full address, country)(Optional information)Certificat de circulation des marchandisesWarenverkehrsbescheinigungCertificato per la circolazione delle merciCertificaat inzake goederenverkeerMovement certificateVarecertifikatVaresertifikatFlutningsskirteiniInitial means of transport (Kind, number or name)(Optional information)Country of destination (1)Intended route (Optional information)For official useSerial numberPackages (2)Description of goodsGross weight (kg) or other measures (hl, cu m, etc.)Number and date of invoices(Optional information)Marks and numbersNumber and kindTotal number of packages...and total quantities...(in words)RemarksCUSTOMS ENDORSEMENTCertified declarationExport document (3):Form ... No ...Issuing country:
EEC-ICELAND AGREEMENTExporter (Name, full address, country)A.W.1 No A.000.000Consignee (Name, full address, country)(Optional information)Certificat de circulation des marchandisesWarenverkehrsbescheinigungCertificato per la circolazione delle merciCertificaat inzake goederenverkeerMovement certificateVarecertifikatVaresertifikatFlutningsskirteiniInitial means of transport (Kind, number or name)(Optional information)Country of destination (1)Intended route (Optional information)For official useSerial numberPackages (2)Description of goodsGross weight (kg) or other measure (hl, cu m, etc.)Number and date of invoices(Optional information)Marks and numbersNumber and kindTotal number of packages...and total quantities...(in words)Remarks:CUSTOMS ENDORSEMENTCertified declarationExport document (3):Form ... No ...Issuing country:
Paper and paperboard; articles of paper pulp, of paper or of paperboard
61
134
—other headings Nos of Chapter 48, excluding Nos 48.01 A and 48.09
10
Chapter 49
Printed books, newspapers, pictures and other products of the printing industry; manuscripts, typescripts and plans — subject to customs duties in the Common Customs Tariff (headings Nos 49.03, 49.05 A, 49.07 A, 49.07 C II, 49.08, 49.09, 49.10, 49.11 B)
The terms ‘the Community’ or ‘Iceland’ shall also cover the territorial waters of the Member States of the Community or of Iceland respectively.
Vessels operating on the high seas, including factory ships, on which the fish caught is worked or processed shall be considered as part of the territory of the State to which they belong provided that they satisfy the conditions set out in Explanatory Note 5.
In order to determine whether goods originate in the Community or in Iceland or in one of the countries specified in Article 2, it shall not be necessary to establish whether the power and fuel, plant and equipment, and machines and tools used to obtain such goods originate in third countries or not.
For the purpose of implementing Article 2 paragraph 1 (A) (b) and (B) (b), the percentage rule must be observed by referring, for the added value acquired, to the provisions contained in Lists A and B. Where the products obtained appear in List A, the percentage rule therefore constitutes a criterion additional to that of change of tariff heading for any non-originating product used. Likewise the provisions ruling out the possibility of cumulating the percentages shown in Lists A and B for any one product obtained are applicable in each country for the added value acquired.
Packing shall be considered as forming a whole with the goods contained therein. This provision, however, shall not apply to packing which is not of the normal type for the article packed and which has intrinsic utilization value and is of a durable nature, apart from its function as packing.
The term ‘their vessels’ shall apply only to vessels:
Note 6 — Article 6
‘Ex-works price’ shall mean the price paid to the manufacturer in whose undertaking the last working or processing is carried out, provided that the price includes the value of all the products used in manufacture.
‘Customs value’ shall be understood as meaning the customs value laid down in the Convention concerning the Valuation of Goods for Customs Purposes signed in Brussels on 15 December 1950.
Note 7 — Article 8
The customs authorities which endorse movement certificates in accordance with the conditions laid down in Article 8 (3) have the right to undertake verification of the goods in accordance with the laws and regulations in force in the State concerned.
Note 8 — Article 10
Where a movement certificate relates to goods originally imported from a Member State of the Community or from Iceland, and re-exported in the same state, the new certificates issued by the re-exporting State must, without prejudice to the provisions of Article 24, show in which State the original movement certificate was issued. Where the goods have not been placed in a bonded warehouse, the certificates must also show that the endorsements provided for in Article 8 (3) have duly been made.
Note 9 — Articles 16 and 22
Where a movement certificate has been issued under the conditions laid down in Article 8 (2) or (4) and relates to goods re-exported in the same state, the customs authorities of the country of destination must be able to obtain, by means of administrative cooperation, true copies of the movement certificate or certificates issued previously relating to those goods
Note 10 — Articles 23 and 25
‘Tariff provisions in force’ shall mean the duty applied on 1 January 1973 in Denmark, Norway, the United Kingdom or Iceland to the products referred to in Article 25 (1) or the duty which, in accordance with the provisions of the Agreement, will be subsequently applied to the said products whenever this duty is lower than that applied to other products originating in the Community or in Iceland.
Note 11 — Article 23
‘Drawback or remission of any kind granted from customs duties’ shall mean any arrangement for refund or remission, partial or complete, of customs duties applicable to products used in manufacture, provided that the said provision concedes, expressly or in effect, this repayment or non-charging or the non-imposition when goods obtained from the said products are exported but not when they are retained for home use.
Note 12 — Articles 24 and 25
Article 24 (1) and Article 25 (1) shall mean, in particular, that application has not been made:
Note 13 — Article 25
Where originating products not fulfilling the conditions laid down in Article 25 (1) are imported into Denmark, Norway or the United Kingdom, the duty which serves as a basis for the tariff reductions provided for in Article 3 (2) of the Agreement is that actually applied on 1 January 1972 by the importing country in respect of third countries.
Manufacture from products of Chapter 17 the value of which exceeds 30 % of the value of the finished product
19.01
Malt extract
Manufacture from products of heading No 11.07
19.02
Preparations of flour meal, starch or malt extract, of a kind used as infant food or for dietetic or culinary purposes, containing less than 50 % by weight of cocoa
Manufacture from cereals and derivatives thereof, meat and milk, or in which the value of products of Chapter 17 used exceeds 30 % of the value of the finished product
19.03
Macaroni, spaghetti and similar products
Manufacture from durum wheat
19.04
Tapioca and sago; tapioca and sago substitutes obtained from potato or other starches
Manufacture from potato starch
19.05
Prepared foods obtained by the swelling or roasting of cereals or cereals products (puffed rice, cornflakes and similar products)
Manufacture from any product other than of Chapter 17note or in which the value of products of Chapter 17 used exceeds 30 % of the value of the finished product
19.06
Communion wafers, empty cachets of a kind suitable for pharmaceutical use, sealing wafers, rice paper, and similar products
Manufacture from products of Chapter 11
19.07
Bread, ships' biscuits and other ordinary bakers' wares, not containing added sugar, honey, eggs, fats, cheese or fruit
Manufacture from products of Chapter 11
19.08
Pastry, biscuits, cakes and other fine bakers' wares, whether or not containing cocoa in any proportion
Manufacture from products of Chapter 11
ex 21.05
Soups and broths, in liquid, solid or powder form
Manufacture from products of heading No 20.02
ex 22.02
Lemonade, flavoured spa waters and flavoured aerated waters, and other non-alcoholic beverages, not including fruit and vegetable juices falling within heading No 20.07, not containing milk or milkfats, containing sugar (sucrose or invert sugar); other
Manufacture from fruit juicesnote or in which the value of products of Chapter 17 used exceeds 30 % of the value of the finished product
22.06
Vermouths, and other wines of fresh grapes flavoured with aromatic extracts
Manufacture from products of heading No 08.04, 20.07, 22.04 or 22.05
ex 22.09
Spirits excluding rum, arrack, tafia, gin, whisky, vodka with an ethyl alcohol content of 45·2o or less and plum, pear or cherry brandy, containing eggs or egg yolk and/or sugar (sucrose or invert sugar)
Manufacture from products of heading No 08.04, 20.07, 22.04 or 22.05
ex 28.13
Hydrobroric acid
Manufacture from products of heading No 28.01note
ex 28.19
Zinc oxide
Manufacture from products of heading No 79.01
28.27
Lead oxides; red lead and orange lead
Manufacture from products of heading No 78.01
ex 28.28
Lithium hydroxide
Manufacture from products of heading No 28.42note
ex 28.29
Lithium fluoride
Manufacture from products of heading No 28.28 or 28.42note
ex 28.30
Lithium chloride
Manufacture from products of heading No 28.28 or 28.42note
ex 28.33
Bromides
Manufacture from products of heading No 28.01 or 28.13note
ex 28.38
Aluminium sulphate
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product
ex 28.42
Lithium carbonate
Manufacture from products of heading No 28.28note
ex 29.02
Organic bromides
Manufacture from products of heading No 28.01 or 28.13note
ex 29.02
Trichlorodi (chloro-phenyl) ethane
Transformation of ethanol into chloral and condensation of chloral with monochlorobenzenenote
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product
ex 29.35
Vinylpyridine
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product
ex 29.38
Nicotinic acid
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product
30.03
Medicaments (including veterinary medicaments)
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product
31.05
Other fertilizers; goods of the present Chapter in tablets, lozenges and similar prepared forms or in packings of a gross weight not exceeding 10 kg
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product
32.06
Colour lakes
Manufacture from materials of heading No 32.04 or 32.05note
32.07
Other colouring matter; inorganic products of a kind used as luminophores
Mixing of oxides or salts of Chapter 28 with extenders such as barium sulphate, chalk barium carbonate and satin whitenote
33.02
Terpenic by-products of the deterpenation of essential oils
Manufacture from products of heading No 33.01note
33.05
Aqueous distillates and aqueous solutions of essential oils, including such products suitable for medicinal uses
Manufacture from products of heading No 33.01note
35.05
Dextrins and dextrin glues; soluble or roasted starches; starch glues
Manufacture from maize or potatoes
37.01
Photographic plates and film in the flat, sensitized, unexposed, of any material other than paper, paperboard or cloth
Manufacture from products of heading No 37.02note
37.02
Film in rolls, sensitized, unexposed, perforated or not
Manufacture from products of heading No 37.01note
37.04
Sensitized plates and film, exposed but not developed, negative or positive
Manufacture from products of heading No 37.01 or 37.02note
38.11
Disinfectants, insecticides, fungicides, weed-killers, anti-sprouting products, rat poisons and similar products, put up in forms or packings for sale by retail or as preparations or as articles (for example, sulphur-treated bands, wicks and candles, fly-papers)
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product
38.12
Prepared glazings, prepared dressings and prepared mordants, of a kind used in the textile, paper, leather or like industries
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product
38.13
Pickling preparations for metal surfaces; fluxes and other auxiliary preparations for soldering, brazing or welding; soldering, brazing or welding powders and pastes consisting of metal and other materials; preparations of a kind used as cores or coatings for welding rods and electrodes
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product
ex 38.14
Anti-knock preparations, oxidation inhibitors, gum inhibitors, viscosity improvers, anti-corrosive preparations and similar prepared additives for mineral oils, excluding prepared additives for lubricants
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product
38.15
Prepared rubber accelerators
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product
38.17
Preparations and charges for fire-extinguishers; charged fire-extinguishing grenades
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product
38.18
Composite solvents and thinners for varnishes and similar products
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product
ex 38.19
Chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included; residual products of the chemical or allied industries, not elsewhere specified or included, excluding:Fusel oil and Dippel's oil;Naphthenic acids and their non-water-soluble salts, esters of naphthenic acids;Sulphonaphthenic acids and their non-water-soluble salts; esters of sulphonaphthenic acids;Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines, thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts;Mixed alkylbenzenes and mixed alkylnaphthalenes;Ion exchangers;Catalysts;Getters for vacuum tubes;Refractory cements or mortars and similar preparations;Alkaline iron oxide for the purification of gas;Carbon (excluding that in artificial graphite of heading No 38.01) of metallo-graphite or other compounds, in the form of small plates, bars or other semi-manufactures
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product
ex 39.02
Polymerization products
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product
39.07
Articles of materials of the kinds described in headings Nos 39.01 to 39.06
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product
40.05
Plates, sheets and strip, of unvulcanized natural or synthetic rubber, other than smoked sheets and crepe sheets of heading No 40.01 or 40.02; granules of unvulcanized natural or synthetic rubber compounded ready for vulcanization; unvulcanized natural or synthetic rubber, compounded before or after coagulation either with carbon black (with or without the addition of mineral oil) or with silica (with or without the addition of mineral oil), in any form, of a kind known as masterbatch
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product
41.08
Patent leather and imitation patent leather; metallized leather
Varnishing or metallizing of leather of headings Nos 41.02 to 41.07 (other than skin leather of crossed Indian sheep and of Indian goat or kid, not further prepared than vegetable tanned, or if otherwise prepared obviously unsuitable for immediate use in the manufacture of leather articles) in which the value of the skin leather used does not exceed 50 % of the value of the finished product
43.03
Articles of furskin
Making up from furskin in plates, crosses and similar forms (heading No ex 43.02)note
44.21
Complete wooden packing cases, boxes, crates, drums and similar packings
Manufacture from boards not cut to size
45.03
Articles of natural cork
Manufacture from products of heading No 45.01
48.06
Paper and paperboard, ruled, lined or squared, but not otherwise printed, in rolls or sheets
Manufacture from paper pulp
48.14
Writing blocks, envelopes, letter-cards, plain postcards, correspondence cards; boxes, pouches, wallets and writing compendiums, of paper or paperboard, containing only an assortment of paper stationery
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product
48.15
Other paper and paperboard, cut to size or shape
Manufacture from paper pulp
48.16
Boxes, bags and other packing containers, of paper or paperboard
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product
49.09
Picture postcards, Christmas and other picture greeting cards, printed by any process, with or without trimmings
Manufacture from products of heading No 49.11
49.10
Calendars of any kind, of paper or paperboard, including calendar blocks
Manufacture from products of heading No 49.11
50.04note
Silk yarn, other than yarn of noil or other waste silk, not put up for retail sale
Manufacture from products of heading No 50.01 or 50.02
50.05note
Yarn spun from silk waste other than noil, not put up for retail sale
Manufacture from products of heading No 50.03, neither carded nor combed
50.06note
Yarn spun from noil silk, not put up for retail sale
Manufacture from products of heading No 50.03, neither carded nor combed
50.07note
Silk yarn and yarn spun from noil or other waste silk, put up for retail sale
Manufacture from products of heading No 50.01 or 50.02 or from products of heading No 50.03, neither carded nor combed
ex 50.08note
Imitation catgut of silk
Manufacture from products of heading No 50.01 or from products of heading No 50.03, neither carded nor combed
50.09note
Woven fabrics of silk or of waste silk other than noil
Manufacture from products of heading No 50.02 or 50.03
50.10note
Woven fabrics of noil silk
Manufacture from products of heading No 50.02 or 50.03
51.01note
Yarn of man-made fibres (continuous), not put up for retail sale
Manufacture from chemical products or textile pulp
51.02note
Monofil, strip (artificial straw and the like) and imitation catgut, of man-made fibre materials
Manufacture from chemical products or textile pulp
51.03note
Yarn of man-made fibres (continuous), put up for retail sale
Manufacture from chemical products or textile pulp
51.04note
Woven fabrics of man-made fibres (continuous), including woven fabrics of monofil or strip of heading No 51.01 or 51.02
Manufacture from chemical products or textile pulp
52.01note
Metallized yarn, being textile yarn spun with metal or covered with metal by any process
Manufacture from chemical products, from textile pulp or from natural textile fibres, discontinuous man-made fibres or their waste, neither carded nor combed
52.02note
Woven fabrics of metal thread or of metallized yarn, of a kind used in articles of apparel, as furnishing fabrics or the like
Manufacture from chemical products, from textile pulp or from natural textile fibres, discontinuous man-made fibres or their waste
53.06note
Yarn of carded sheep's or lambs' wool (woollen yarn), not put up for retail sale
Manufacture from products of heading No 53.01 or 53.03
53.07note
Yam of combed sheep's or lambs' wool (worsted yarn), not put up for retail sale
Manufacture from products of heading No 53.01 or 53.03
53.08note
Yarn of fine animal hair (carded or combed), not put up for retail sale
Manufacture from raw fine animal hair of heading No 53.02
53.09note
Yam of horsehair or of other coarse animal hair, not put up for retail sale
Manufacture from raw coarse animal hair of heading No 53.02 or from raw horsehair of heading No 05.03
53.10note
Yarn of sheep's or lambs' wool, of horsehair or of other animal hair (fine or coarse), put up for retail sale
Manufacture from materials of headings Nos 05.03 and 53.01 to 53.04
53.11note
Woven fabrics of sheep's or lambs' wool or of fine animal hair
Manufacture from materials of headings Nos 53.01 to 53.05
53.12note
Woven fabrics of coarse animal hair other than horsehair
Manufacture from products of headings Nos 53.02 to 53.05
53.13note
Woven fabrics of horsehair
Manufacture from horsehair of heading No 05.03
54.03note
Flax or ramie yarn, not put up for retail sale
Manufacture from products of heading No 54.01 or 54.02, neither carded nor combed
54.04note
Flex or ramie yarn, put up for retail sale
Manufacture from materials of heading No 54.01 or 54.02
54.05note
Woven fabrics of flax or of ramie
Manufacture from materials of heading No 54.01 or 54.02
55.05note
Cotton yarn, not put up for retail sale
Manufacture from materials of heading No 55.01 or 55.03
55.06note
Cotton yarn, put up for retail sale
Manufacture from materials of heading No 55.01 or 55.03
55.07note
Cotton gauze
Manufacture from materials of heading No 55.01, 55.03 or 55.04
55.08note
Terry towelling and similar terry fabrics, of cotton
Manufacture from materials of heading No 55.01, 55.03 or 55.04
55.09note
Other woven fabrics of cotton
Manufacture from materials of heading No 55.01, 55.03 or 55.04
56.01
Man-mace fibres (discontinuous), not carded, combed or otherwise prepared for spinning
Manufacture from chemical products or textile pulp
56.02
Continuous filament tow for the manufacture of man-made fibres (discontinuous)
Manufacture from chemical products or textile pulp
56.03
Waste (including yarn waste and pulled or garnetted rags) of man-made fibres (continuous or discontinuous), not carded, combed or otherwise prepared for spinning
Manufacture from chemical products or textile pulp
56.04
Man-made fibres (discontinuous or waste), carded, combed or otherwise prepared for spinning
Manufacture from chemical products or textile pulp
56.05note
Yarn of man-made fibres (discontinuous or waste), not put up for retail sale
Manufacture from chemical products or textile pulp
56.06note
Yarn of man-made fibres (discontinuous or waste), put up for retail sale
Manufacture from chemical products or textile pulp
56.07note
Woven fabrics of man-made fibres (discontinuous or waste)
Manufacture from products of headings Nos 56.01 to 56.03
57.05note
Yarn of true hemp
Manufacture from raw true hemp
57.06note
Yarn of jute or of other textile bast fibres of heading No 57.03
Manufacture from raw jute or from other raw textile bast fibres of heading No 57.03
57.07note
Yarn of other vegetable textile fibres
Manufacture from raw vegetable textile fibres of heading No 57.02 or 57.04
57.08
Paper yarn
Manufacture from products of Chapter 47, from chemical products, textile pulp or from natural textile fibres, discontinuous man-made fibres or their waste, neither carded nor combed
57.09note
Woven fabrics of true hemp
Manufacture from products of heading No 57.01
57.10note
Woven fabrics of jute or of other textile bast fabrics of heading No 57.03
Manufacture from raw jute or from other raw textile bast fibres of heading No 57.03
57.11note
Woven fabrics of other vegetable textile fibres
Manufacture from materials of heading No 57.02 or 57.04 or from coir yarn of heading No 57.07
57.12
Woven fabrics of paper yarn
Manufacture from paper, from chemical products, textile pulp or from natural textile fibres, discontinuous man-made fibres or their waste
58.01note
Carpets, carpeting and rugs, knotted (made up or not)
Manufacture from materials of headings Nos 50.01 to 50.03, 51.01, 53.01 to 53.05, 54.01, 55.01 to 55.04, 56.01 to 56.03 or 57.01 to 57.04
58.02note
Other carpets, carpeting, rugs, mats and matting, and ‘Kelem’, ‘Schumacks’ and ‘Karamanie’ rugs and the like (made up or not)
Manufacture from materials of headings Nos 50.01 to 50.03, 51.01, 53.01 to 53.05, 54.01, 55.01 to 55.04, 56.01 to 56.03, 57.01 to 57.04 or from coir yarn of heading No 57.07
58.04note
Woven pile fabrics and chenille fabrics (other than terry towelling or similar terry fabrics of cotton of heading No 55.08 and fabrics of heading No 58.05)
Manufacture from materials of headings Nos 50.01 to 50.03, 53.01 to 53.05, 54.01, 55.01 to 55.04, 56.01 to 56.03, 57.01 to 57.04 or from chemical products or textile pulp
58.05note
Narrow woven fabrics, and narrow fabrics (bolduc) consisting of warp without weft assembled by means of an adhesive, other than goods falling within heading No 58.06
Manufacture from materials of headings Nos 50.01 to 50.03, 53.01 to 53.05, 54.01, 55.01 to 55.04, 56.01 to 56.03 or 57.01 to 57.04 or from chemical products or textile pulp
58.06note
Woven labels, badges and the like, not embroidered, in the piece, in strips or cut to shape or size
Manufacture from materials of headings Nos 50.01 to 50.03, 53.01 to 53.05, 54.01, 55.01 to 55.04, 56.01 to 56.03 or from chemical products or textile pulp
58.07note
Chenille yarn (including flock chenille yarn), gimped yarn (other than metallized yarn of heading No 52.01 and gimped horsehair yarn); braids and ornamental trimmings in the piece; tassels, pompons and the like
Manufacture from materials of headings Nos 50.01 to 50.03, 53.01 to 53.05, 54.01, 55.01 to 55.04, 56.01 to 56.03 or from chemical products or textile pulp
58.08note
Tulle and other net fabrics (but not including woven, knitted or crocheted fabrics), plain
Manufacture from materials of headings Nos 50.01 to 50.03, 53.01 to 53.05, 54.01, 55.01 to 55.04, 56.01 to 56.03 or from chemical products or textile pulp
58.09note
Tulle and other net fabrics (but not including woven, knitted or crocheted fabrics), figured; hand or mechanically made lace, in the piece, in strips or in motifs
Manufacture from materials of headings Nos 50.01 to 50.03, 53.01 to 53.05, 54.01, 55.01 to 55.04, 56.01 to 56.03 or from chemical products or textile pulp
58.10
Embroidery, in the piece, in strips or in motifs
Manufacture in which the value of the product used does not exceed 50 % of the value of finished product
59.01note
Wadding and articles of wadding; textile flock and dust and mill neps
Manufacture either from natural fibres or from chemical products or textile pulp
59.02note
Felt and articles of felt, whether or not impregnated or coated
Manufacture either from natural fibres or from chemical products or textile pulp
59.03note
Bonded fibre fabrics, similar bonded yarn fabrics, and articles of such fabrics, whether or not impregnated or coated
Manufacture either from natural fibres or from chemical products or textile pulp
59.04note
Twine, cordage, ropes and cables, plaited or not
Manufacture either from natural fibres or from chemical products or textile pulp or from coir yarn of heading No 57.07
59.05note
Nets and netting made of twine, cordage or rope, and made up fishing nets of yarn, twine, cordage or rope
Manufacture either from natural fibres or from chemical products or textile pulp or from coir yarn of heading No 57.07
59.06note
Other articles made from yarn, twine, cordage, rope or cables, other than textile fabrics and articles made from such fabrics
Manufacture either from natural fibres or from chemical products or textile pulp or from coir yarn of heading No 57.07
59.07
Textile fabrics coated with gum or amylaceous substances of a kind used for the outer covers of books and the like; tracing cloth; prepared painting canvas; buckram and similar fabrics for hat foundations and similar uses
Manufacture from yarn
59.08
Textile fabrics impregnated, coated, covered or laminated with preparations of cellulose derivatives or of other artificial plastic materials
Manufacture from yarn
59.09
Textile fabrics coated or impregnated with oil of preparations with a basis of drying oil
Manufacture from yarn
59.10note
Linoleum and materials prepared on a textile base in a similar manner to linoleum, whether or not cut to shape or of a kind used as floor coverings; floor coverings consisting of a coating applied on a textile base, cut to shape or not
Manufacture either from yarn or from textile fibres
59.11
Rubberized textile fabrics, other than rubberized knitted or crocheted goods
Manufacture from yarn
59.12
Textile fabrics otherwise impregnated or coated; painted canvas being theatrical scenery, studio backcloths or the like
Manufacture from yarn
59.13note
Elastic fabrics and trimmings (other than knitted or crocheted goods) consisting of textile materials combined with rubber threads
Manufacture from single yarn
59.15note
Textile hose-piping and similar tubing, with or without lining, armour or accessories of other materials
Manufacture from materials of headings Nos 50.01 to 50.03, 53.01 to 53.05, 54.01, 55.01 to 55.04, 56.01 to 56.03 or 57.01 to 57.04 or from chemical products or textile pulp
59.16note
Transmission, conveyor or elevator belts or belting, of textile material, whether or not strengthened with metal or other material
Manufacture from materials of headings Nos 50.01 to 50.03, 53.01 to 53.05, 54.01, 55.01 to 55.04, 56.01 to 56.03 or 57.01 to 57.04 or from chemical products or textile pulp
59.17note
Textile fabrics and textile articles, of a kind commonly used in machinery or plant
Manufacture from materials of headings Nos 50.01 to 50.03, 53.01 to 53.05, 54.01, 55.01 to 55.04, 56.01 to 56.03 or 57.01 to 57.04 or from chemical products or textile pulp
ex Chapter 60
Knitted and crocheted goods, excluding knitted or crocheted goods obtained by sewing or by the assembly of pieces of knitted or crocheted goods (cut or obtained directly to shape)
Manufacture from natural fibres, carded or combed, from materials of headings Nos 56.01 to 56.03, from chemical products or textile pulpnote
ex 60.02
Gloves, mittens and mitts, knitted or crocheted, not elastic or rubberized, obtained by sewing or by the assembly of pieces of knitted or crocheted goods (cut or obtained directly to shape)
Manufacture from yarnnote
ex 60.03
Stockings, under-stockings, socks, anklesocks, sockettes and the like, knitted or crocheted, not elastic or rubberized, obtained by sewing or by the assembly of pieces of knitted or crocheted goods (cut or obtained directly to shape)
Manufacture from yarnnote
ex 60.04
Undergarments, knitted or crocheted, not elastic or rubberized, obtained by sewing or by the assembly of pieces of knitted or crocheted goods (cut or obtained directly to shape)
Manufacture from yarnnote
ex 60.05
Outer garments and other articles, knitted or crocheted, not elastic or rubberized, obtained by sewing or by the assembly of pieces of knitted or crocheted goods (cut or obtained directly to shape)
Manufacture from yarnnote
ex 60.06
Other articles, knitted or crocheted, elastic or rubberized (including elastic knee-caps and elastic stockings), obtained by sewing or by the assembly of pieces of knitted or crocheted goods (cut or obtained directly to shape)
Manufacture from yarnnote
61.01
Men's and boys' outer garments
Manufacture from yarnnotenote
ex 61.02
Womens's, girls' and infants' outer garments, not embroidered
Manufacture from yarnnotenote
ex 61.02
Women's, girls' and infants' outer garments, embroidered
Manufacture from fabrics, not embroidered, the value of which does not exceed 40 % of the value of the finished productnote
61.03
Men's and boys' undergarments, including collars, shirt fronts and cuffs
Manufacture from yarnnotenote
61.04
Women's, girls' and infants' undergarments
Manufacture from yarnnotenote
ex 61.05
Handkerchiefs, not embroidered
Manufacture from unbleached single yarnnotenotenote
ex 61.05
Handkerchiefs, embroidered
Manufacture from fabrics, not embroidered, the value of which does not exceed 40 % of the value of the finished productnote
ex 61.06
Shawls, scarves, mufflers, mantillas, veils and the like, not embroidered
Manufacture from unbleached single yarn of natural textile fibres or discontinuous man-made fibres or their waste, or from chemical products or textile pulpnotenote
ex 61.06
Shawls, scarves, mufflers, mantillas, veils and the like, embroidered
Manufacture from fabrics, not embroidered, the value of which does not exceed 40 % of the value of the finished productnote
61.07
Ties, bow ties and cravats
Manufacture from yarnnotenote
ex 61.08
Collars, tuckers, fallals, bodice-fronts, jabots, cuffs, flounces, yokes and similar accessories and trimmings for women's and girls' garments, not embroidered
Manufacture from yarnnotenote
ex 61.08
Collars, tuckers, fallals, bodice-fronts, jabots, cuffs, flounces, yokes and similar accessories and trimmings for women's and girls' garments, not embroidered
Manufacture from fabrics, not embroidered, the value of which does not exceed 40 % of the value of the finished productnote
61.09
Corsets, corset-belts, suspender-belts, brassieres, braces, suspenders, garters and the like (including such articles of knitted or crocheted fabric), whether or not elastic
Manufacture from yarnnotenote
61.10
Gloves, mittens, mitts, stockings, socks and sockettes, not being knitted or crocheted goods
Manufacture from yarnnotenote
61.11
Made-up accessories for articles of apparel (for example, dress shields, shoulder and other pads, belts, muffs, sleeve protectors, pockets)
Manufacture from yarnnotenote
62.01
Travelling rugs and blankets
Manufacture from unbleached, yarn of Chapters 50 to 56notenote
ex 62.02
Bed linen, table linen, toilet linen and kitchen linen; curtains and other furnishing articles; not embroidered
Manufacture from unbleached single yarnnotenote
ex 62.02
Bed linen, table linen, toilet linen and kitchen linen; curtains and other furnishing articles; embroidered
Manufacture from fabrics, not embroidered, the value of which does not exceed 40 % of the value of the finished product
62.03
Sacks and bags, of a kind used for the packing of goods
Manufacture from chemical products, textile pulp or from natural textile fibres, discontinuous man-made fibres or their wastenotenote
62.04
Tarpaulins, sails, awnings, sun-blinds, tents and camping goods
Manufacture from single unbleached yarnnotenote
62.05
Other made up textile articles (including dress patterns)
Manufacture in which the value of the products used does not exceed 40 % of the value of the finished product
64.01
Footwear with outer soles and uppers of rubber or artificial plastic material
Manufacture from assemblies of uppers affixed to inner soles or to other sole components, but without outer soles, of any material except metal
64.02
Footwear with outer soles of leather or composition leather; footwear (other than footwear falling within heading No 64.01) with outer soles of rubber or artificial plastic material
Manufacture from assemblies of uppers affixed to inner soles or to other sole components, but without outer soles, of any material except metal
64.03
Footwear with outer soles of wood or cork
Manufacture from assemblies of uppers affixed to inner soles or to other sole components, but without outer soles, of any material except metal
64.04
Footwear with outer soles of other materials
Manufacture from assemblies of uppers affixed to inner soles or to other sole components, but without outer soles, of any material except metal
65.03
Felt hats and other felt headgear, being headgear made from the felt hoods and plateaux falling within heading No 65.01, whether or not lined or trimmed
Manufacture from textile fibres
65.05
Hats and other headgear (including hair-nets), knitted or crocheted or made up from lace, felt or other textile fabric in the piece (but not from strips), whether or not lined or trimmed
Manufacture either from yarn or from textile fibres
66.01
Umbrellas and sunshades (including walking-stick umbrellas, umbrella tents, and garden and similar umbrellas)
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product
ex 70.07
Cast, rolled, drawn or blown glass (including flashed or wired glass) cut to shape other than rectangular shape, or bent or otherwise worked (for example, edge worked or engraved), whether or not surface ground or polished; multiple-walled insulating glass
Manufacture from drawn, cast or rolled glass of headings Nos 70.04 to 70.06
70.08
Safety glass consisting of toughened or laminated glass, shaped or not
Manufacture from drawn, cast or rolled glass of headings Nos 70.04 to 70.06
70.09
Glass minors (including rear-view mirrors), unframed, framed or backed
Manufacture from drawn, cast or rolled glass of headings Nos 70.04 to 70.06
71.15
Articles consisting of, or incorporating, pearls, precious or semi-precious stones (natural, synthetic or reconstructed)
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished productnote
73.07
Blooms, billets, slabs and sheet-bars (including tinplate bars) of iron or steel; pieces roughly shaped by forging, of iron or steel
Manufacture from products of heading No 73.06
73.08
Iron or steel coils re-rolling
Manufacture from products of heading No 73.07
73.09
Universal plates of iron or steel
Manufacture from products of heading No 73.07 or 73.08
73.10
Bars and rods (including wire rod), of iron or steel, hot-rolled, forged, extruded, cold-formed or cold-finished (including precision-made); hollow mining drill steel
Manufacture from products of heading No 73.07
73.11
Angles, shapes and sections, of iron or steel, hot-rolled, forged, extruded, cold-formed or cold-finished; sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements
Manufacture from products of headings Nos 73.07 to 73.10, 73.12 or 73.13
73.12
Hoop and strip, of iron or steel, hot-rolled or cold-rolled
Manufacture from products of headings Nos 73.07 to 73.09 or 73.13
73.13
Sheets and plates, of iron or steel, hot-rolled or cold-rolled
Manufacture from products of headings Nos 73.07 to 73.09
73.14
Iron or steel wire, whether or not coated, but not insulated
Manufacture from products of heading No 73.10
73.16
Railway and tramway track construction material of iron or steel, the following: rails, check-rails, switch blades, crossings (or frogs), crossing pieces, point rods, rack rails, sleepers, fish-plates, chairs, chair wedges, sole plates (base plates), rail clips, bed-plates, ties and other material specialized for joining or fixing rails
Manufacture from products of heading No 73.06
73.18
Tubes and pipes and blanks therefor, of iron (other than of cast iron) or steel, excluding high-pressure hydro-electric conduits
Manufacture from products of headings Nos 73.06 and 73.07 or heading No 73.15 in the forms specified in headings Nos 73.06 and 73.07
74.03
Wrought bars, rods, angles, shapes and sections, of copper; copper wire
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished productnote
74.04
Wrought plates, sheets and strip, of copper
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished productnote
74.05
Copper foil (whether or not embossed, cut to shape, perforated, coated, printed, or backed with paper or other reinforcing material), of a thickness (excluding any backing) not exceeding 0·15 mm
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished productnote
74.06
Copper powder and flakes
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished productnote
74.07
Tubes and pipes and blanks therefor, of copper; hollow bars of copper
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished productnote
74.08
Tube and pipe fittings (for example, joints, elbows, sockets and flanges), of copper
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished productnote
74.09
Reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of copper, of a capacity exceeding 300 1, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment
Manufacture in which the value of products used does not exceed 50 % of the value of the finished productnote
74.10
Stranded wire, cables, cordage, ropes, plaited bands and the like, of copper wire, but excluding insulated electric wires and cables
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished productnote
74.11
Gauze, cloth, grill, netting, fencing, reinforcing fabric and similar materials (including endless bands), of copper wire
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished productnote
74.12
Expanded metal, of copper
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished productnote
74.13
Chain and parts thereof, of copper
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished productnote
74.14
Nails, tacks, staples, hook-nails, spiked cramps, studs, spikes and drawing pins, of copper, or of iron or steel with heads of copper
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished productnote
74.15
Bolts and nuts (including bolt ends and screw studs), whether or not threaded or tapped, and screws (including screw hooks and screw rings), of copper; rivets, cotters, cotter-pins, washers and spring washers, of copper
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished productnote
74.16
Springs, of copper
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished productnote
74.17
Cooking and heating apparatus of a kind used for domestic purposes, not electrically operated, and parts thereof, of copper
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished productnote
74.18
Other articles of a kind commonly used for domestic purposes, sanitary ware for indoor use, and parts of such articles and ware, of copper
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished productnote
74.19
Other articles of copper
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished productnote
75.02
Wrought bars, rods, angles, shapes and sections, of nickel; nickel wire
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished productnote
75.03
Wrought plates, sheets and strip, of nickel; nickel foil; nickel powders and flakes
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished productnote
75.04
Tubes and pipes and blanks therefor, of nickel; hollow bars, and tube and pipe fittings (for example, joints, elbows, sockets and flanges), of nickel
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished productnote
75.05
Electroplating anodes, of nickel, wrought or unwrought, including those produced by electrolysis
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished productnote
75.06
Other articles of nickel
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished productnote
76.02
Wrought bars, rods, angles, shapes and sections, of aluminium; aluminium wire
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product
76.03
Wrought plates, sheets and strip, of aluminium
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product
76.04
Aluminium foil (whether or not embossed, cut to shape, perforated, coated, printed, or backed with paper or other reinforcing material), of a thickness (excluding any backing) not exceeding 0·20 mm
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product
76.05
Aluminium powders and flakes
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product
76.06
Tubes and pipes and blanks therefor, of aluminium; hollow bars of aluminium
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product
76.07
Tube and pipe fittings (for example, joints, elbows, sockets and flanges), of aluminium
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product
76.08
Structures, complete or incomplete, whether or not assembled, and parts of structures (for example, hangars and other buildings, bridges and bridge-sections, towers, lattice masts, roofs, roofing frameworks, door and window frames, balustrades, pillars and columns), of aluminium; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of aluminium
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product
76.09
Reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of aluminium, of a capacity exceeding 300 l, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product
76.10
Casks, drums, cans, boxes and similar containers (including rigid and collapsible tubular containers), of aluminium, of a description commonly used for the conveyance or packing of goods
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product
76.11
Containers of aluminium for compressed or liquefied gas
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product
76.12
Stranded wire, cables, cordage, ropes, plaited bands and the like, of aluminium wire, but excluding insulated electric wires and cables
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product
76.13
Gauze, cloth, grill, netting, reinforcing fabric and similar materials, of aluminium wire
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product
76.14
Expanded metal, of aluminium
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product
76.15
Articles of a kind commonly used for domestic purposes, sanitary ware for indoor use, and parts of such articles and ware, of aluminium
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product
76.16
Other articles of aluminium
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product
77.02
Wrought bars, rods, angles, shapes and sections, of magnesium; magnesium wire; wrought plates, sheets and strip, of magnesium; magnesium foil; raspings and shavings of uniform size, powders and flakes, of magnesium; tubes and pipes and blanks therefor, of magnesium; hollow bars of magnesium
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product
77.03
Other articles of magnesium
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product
78.02
Wrought bars, rods, angles, shapes and sections, of lead; lead wire
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product
78.03
Wrought plates, sheets and strip, of lead
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product
78.04
Lead foil (whether or not embossed, cut to shape, perforated, coated, printed, or backed with paper or other reinforcing material), of a weight (excluding any backing) not exceeding 1700 kg/m2; lead powders and flakes
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product
78.05
Tubes and pipes and blanks therefor, of lead; hollow bars and tube and pipe fittings (for example, joints, elbows, sockets, flanges and S-bends)
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product
78.06
Other articles of lead
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product
79.02
Wrought bars, rods, angles, shapes and sections, of zinc; zinc wire
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product
79.03
Wrought plates, sheets and strip, of zinc; zinc foil; zinc powders and flakes
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product
79.04
Tubes and pipes and blanks therefor, of zinc; hollow bars, and tube and pipe fittings (for example, joints, elbows, sockets and flanges), of zinc
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product
79.05
Gutters, roof capping, skylight frames, and other fabricated building components, of zinc
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product
79.06
Other articles of zinc
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product
80.02
Wrought bars, rods, angles, shapes and sections, of tin; tin wire
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product
80.03
Wrought plates, sheets and strip, of tin
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product
80.04
Tin foil (whether or not embossed, cut to shape, perforated, coated, printed, or backed with paper or other reinforcing material), of a weight (excluding any backing) not exceeding 1 kg/m2; tin powders and flakes
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product
80.05
Tubes and pipes and blanks therefor, of tin; hollow bars, and tube and pipe fittings (for example, joints, elbows, sockets and flanges), of tin
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product
82.05
Interchangeable tools for hand tools, for machine tools or for power-operated hand tools (for example, for pressing, stamping, drilling, tapping, threading, boring, broaching, milling, cutting, turning, dressing, morticing or screwdriving), including dies for wire drawing, extrusion dies for metal, and rock-drilling bits
Working, processing or assembly in which the value of the materials and parts used does not exceed 40 % of the value of the finished productnote
82.06
Knives and cutting blades, for machines or for mechanical appliances
Working, processing or assembly in which the value of the materials and parts used does not exceed 40 % of the value of the finished productnote
ex Chapter 84
Boilers, machinery and mechanical applicances and parts thereof, excluding refrigerators and refrigerating equipment (electrical and other) (No 84.15) and sewing machines, including furniture specially designed for sewing machines (ex No 84.41)
Working, processing or assembly in which the value of the materials and parts used does not exceed 40 % of the value of the finished productnote
84.15
Refrigerators and refrigerating equipment (electrical and other)
Working, processing or assembly in which the value of the non-originating materials and parts used does not exceed 40 % of the value of the finished product, and provided that at least 50 % in value of the materials and partsnote used are originating products
ex 84.41
Sewing machines, including furniture for sewing machines
Working, processing or assembly in which the value of the non-originating materials and parts used does not exceed 40 % of the value of the finished product, and provided that:(a) at least 50 % in value of the materials and parts used for the assembly of the head (motor excluded) are originating products, and(b) the thread tension, crochet and zigzag mechanisms are originating products
ex Chapter 85
Electrical machinery and equipment; parts thereof; excluding products of heading No 85.14 or 85.15
Working, processing or assembly in which the value of the non-originating material and parts used do not exceed 40 % of the value of the finished product
85.14
Microphones and stands therefor; loudspeakers; audio-frequency electric amplifiers
Working, processing or assembly in which the value of the non-originating materials and parts used does not exceed 40 % of the value of the finished product, and provided that:(a) at least 50 % in value of the materials and parts used are originating products, and(b) the value of the non-originating transistors- used does not exceed 3 % of the value of the finished product
85.15
Radiotelegraphic and radiotelephonic transmission and reception apparatus; radiobroadcasting and television transmission and reception apparatus (including receivers incorporating sound recorders or reproducers) and television cameras; radio navigational aid apparatus, radar apparatus and radio remote control apparatus
Working, processing or assembly in which the value of the non-originating materials and parts used does not exceed 40 % of the value of the finished product, and provided that:(a) at least 50 % in value of the materials and parts used are originating products, and(b) the value of the non-originating transistors used does not exceed 3 % of the value of the finished product
Chapter 86
Railway and tramway locomotives, rolling-stock and parts thereof; railway and tramway track fixtures and fittings; traffic signalling equipment of all kinds (not electrically powered)
Working, processing or assembly in which the value of the materials and parts used does not exceed 40 % of the value of the finished product
ex Chapter 87
Vehicles, other than railway or tramway rolling-stock, and parts thereof, excluding products of heading No 87.09
Working, processing or assembly in which the value of the materials and parts used does not exceed 40 % of the value of the finished product
87.09
Motor-cycles, auto-cycles and cycles fitted with an auxiliary motor, with our without side-cars; side-cars of all kinds
Working, processing or assembly in which the value of the non-originating materials and parts used does not exceed 40 % of the finished product, and provided that at least 50 % in value of the materials and partsnote used are originating products
ex Chapter 90
Optical, photographic, cinematographic, measuring, checking, precision, medical and surgical instruments and apparatus and parts thereof, excluding products of heading No 90.05, 90.07, 90.08, 90.12 or 90.26
Working, processing or assembly in which the value of the materials and parts used does not exceed 40 % of the value of the finished product
90.05
Refracting telescopes (monocular and binocular), prismatic or not
Working, processing or assembly in which the value of the non-originating materials and parts used does not exceed 40 % of the value of the finished product, and provided that at least 50 % in value of the materials and partsnote used are originating products
Working, processing or assembly in which the value of the non-originating materials and parts used does not exceed 40 % of the value of the finished product, and provided that at least 50 % in value of the materials and partsnote used are originating products
90.08
Cinematographic cameras, projectors, sound recorders and sound reproducers; any combination of these articles
Working, processing or assembly in which the value of the non-originating materials and parts used does not exceed 40 % of the value of the finished product, and provided that at least 50 % in value of the materials and partsnote used are originating products
90.12
Compound optical microscopes, whether or not provided with means for photographing or projecting the image
Working, processing or assembly in which the value of the non-originating materials and parts used does not exceed 40 % of the value of the finished product, and provided that at least 50 % in value of the materials and partsnote used are originating products
90.26
Gas, liquid and electricity supply or production meters; calibrating meters therefor
Working, processing or assembly in which the value of the non-originating materials and parts used does not exceed 40 % of the value of the finished product, and provided that at least 50 % in value of the materials and partsnote used are originating products
ex Chapter 91
Clocks and watches and parts thereof, excluding products of heading No 91.04 or 91.08
Working, processing or assembly in which the value of the materials and parts used does not exceed 40 % of the value of the finished product
91.04
Other clocks
Working, processing or assembly in which the value of the non-originating materials and parts used does not exceed 40 % of the value of the finished product, and provided that at least 50 % in value of the materials and partsnote used are originating products
91.08
Clock movements, assembled
Working, processing or assembly in which the value of the non-originating materials and parts used does not exceed 40 % of the value of the finished product, and provided that at least 50 % in value of the materials and partsnote used are originating products
ex Chapter 92
Muscial instruments; sound recorders and reproducers; television image and sound recorders and reproducers, magnetic; parts and accessories of such articles; excluding products of heading No 92.11
Working, processing or assembly in which the value of the non-originating materials and parts used does not exceed 40 % of the value of the finished product
92.11
Gramophones, dictating machines and other sound recorders and reproducers, including record players and tape decks, with or without sound-heads; television image and sound recorders and reproducers, magnetic
Working, processing or assembly in which the value of the non-originating materials and parts used does not exceed 40 % of the value of the finished product, and provided that:(a) at least 50 % in value of the materials and parts used are originating products, and(b) the value of the non-originating transistors used does not exceed 3 % of the value of the finished product
Chapter 93
Arms and ammunition; parts thereof
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product
96.02
Other brooms and brushes (including brushes of a kind used as parts of machines); paint rollers; squeegees (other than roller squeegees) and mops
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product
97.03
Other toys; working models of a kind used for recreational purposes
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product
98.01
Buttons and button moulds, studs, cuff-links, and press-fasteners, including snap fasteners and press-studs; blanks and parts of such articles
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product
98.08
Typewriter and similar ribbons, whether or not on spools; ink-pads, with or without boxes
Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product
ex 98.15
Vacuum flasks and other vacuum vessels
Manufacture from products of heading No 70.12
ex Chapter 38
Miscellaneous chemical products with the exception of refined tall oil
Working or processing in which the value of the non-originating products used does not exceed 20 % of the value of the finished product
ex 38.05
Refined tall oil
Refining of crude tall oil
Chapter 39
Artificial resins and plastic materials, cellulose esters and ethers; articles thereof
Working or processing in which the value of the non-originating products used does not exceed 20 % of the value of the finished product
ex 40.01
Slabs of crepe rubber for soles
Lamination of crepe sheets of natural rubber
ex 40.07
Rubber thread and cord, textile-covered
Manufacture from rubber thread or cord
ex 41.01
Sheep and lamb-skins without the wool
Removing wool from sheep and lamb-skins in the wool
ex 41.02
Retanned bovine cattle leather (including buffalo leather) and equine leather, except leather of heading Nos 41.06 to 41.08
Retanning of bovine cattle leather (including buffalo leather) and equine leather, not further prepared than tanned
ex 41.03
Retanned sheep- and lamb-skin leather, except leather of heading Nos 41.06 to 41.08
Retanning of sheep and lamb-skin leather, not further prepared than tanned
ex 41.04
Retanned goat- and kid-skin leather, except leather of heading Nos 41.06 to 41.08
Retanning of goat and kid-skin leather, not further prepared than tanned
ex 41.05
Other kinds of retanned leather, except leather of heading Nos 41.06 to 41.08
Retanning of other kinds of leather, not further prepared than tanned
ex 43.02
Assembled furskins
Bleaching, dyeing, dressing, cutting and assembling of tanned or dressed furskins
ex 50.09
Printed fabrics
Printing accompanied by finishing operations (bleaching, dressing, drying, steaming, burling, mending, impregnating, sanforizing, mercerizing) of fabrics the value of which does not exceed 47·5 % of the value of the finished product
ex 50.10
ex 51.04
ex 53.11
ex 53.12
ex 53.13
ex 54.05
ex 55.07
ex 55.08
ex 55.09
ex 56.07
ex 68.03
Articles of slate, including articles of agglomerated slate
Manufacture of articles of slate
ex 68.13
Articles of asbestos; articles of mixtures with a basis of asbestos or of mixtures with a basis of asbestos and magnesium carbonate
Manufacture of articles of asbestos or of mixtures with a basis of asbestos, or of mixtures with a basis of asbestos and magnesium carbonate
ex 68.15
Articles of mica, including bonded mica splittings on a support of paper or fabric
Manufacture of articles of mica
ex 70.10
Cut-glass bottles
Cutting of bottles the value of which does not exceed 50 % of the value of the finished product
ex 70.13
Cut glassware (other than articles of heading No 70.19) of a kind commonly used for table, kitchen, toilet or office purposes, for indoor decoration, or for similar uses
Cutting of glassware the value of which does not exceed 50 % of the value of the finished product
ex 70.20
Articles made from glass fibre
Manufacture from unworked glass fibre
ex 71.02
Precious and semi-precious stones, cut or otherwise worked, but not mounted, set or strung (except ungraded stones temporarily strung for convenience of transport)
Manufacture from unworked precious and semi-precious stones
ex 71.03
Synthetic or reconstructed precious or semi-precious stones, cut or otherwise worked, but not mounted, set or strung (except ungraded stones temporarily strung for convenience of transport)
Manufacture from unworked synthetic or reconstructed precious or semi-precious stones
ex 71.05
Silver and silver alloys, including silver gilt and platinum-plated silver, semi-manufactured
Rolling, drawing, beating or grinding of unwrought silver and silver alloys
ex 71.05
Silver, including silver gilt and platinum-plated silver, unwrought
Alloying or electrolytic separation of unwrought silver and silver alloys
ex 71.06
Rolled silver, semi-manufactured
Rolling, drawing, beating or grinding of unwrought rolled silver
ex 71.07
Gold, including platinum-plated gold, semi-manufactured
Rolling, drawing, beating or grinding of unwrought gold, including platinum-plated gold
ex 71.07
Gold, including platinum-plated gold, unwrought
Alloying or electrolytic separation of unwrought gold or gold alloys
ex 71.08
Rolled gold on base metal or silver, semi-manufactured
Rolling, drawing, beating or grinding of unwrought rolled gold on base metal or silver
ex 71.09
Platinum and other metals of the platinum group, semi-manufactured
Rolling, drawing, beating or grinding of unwrought platinum or other metals of the platinum group
ex 71.09
Platinum and other metals of the platinum group, unwrought
Alloying or electrolytic separation of unwrought platinum or other metals of the platinum group
ex 71.10
Rolled platinum or other platinum group metals, on base metal or precious metal, semi-manufactured
Rolling, drawing, beating or grinding of unwrought rolled platinum or other unwrought platinum group metals, on base metal or precious metal
ex 73.15
Alloy steel and high-carbon steel:
—in the forms mentioned in heading Nos 73.07 to 73.13
Manufacture from products in the forms mentioned in heading No 73.06
— in the forms mentioned in heading No 73.14
Manufacture from products in the forms mentioned in heading No 73.06 or 73.07
ex 74.01
Unrefined copper (blister copper and other)
Smelting of copper matte
ex 74.01
Refined copper
Fire-refining or electrolytic refining of unrefined copper (blister copper and other), copper waste or scrap
ex 74.01
Copper alloy
Fusion and thermal treatment of refined copper, copper waste or scrap
ex 75.01
Unwrought nickel (excluding electroplating anodes of heading No 75.05)
Refining by electrolysis, by fusion or chemically, of nickel mattes, nickel speiss and other intermediate products of nickel metallurgy
ex 77.04
Beryllium, wrought
Rolling, drawing or grinding of unwrought beryllium the value of which does not exceed 50 % of the value of the finished product
ex 81.01
Tungsten, wrought
Manufacture from unwrought tungsten the value of which does not exceed 50 % of the value of the finished product
ex 81.02
Molybdenum, wrought
Manufacture from unwrought molybdenum the value of which does not exceed 50 % of the value of the finished product
ex 81.03
Tantalum, wrought
Manufacture from unwrought tantalum the value of which does not exceed 50 % of the value of the finished product
ex 81.04
Other base metals, wrought
Manufacture from other base metals, unwrought, the value of which does not exceed 50 % of the value of the finished product
84.06
Internal-combustion piston engines
Working, processing or assembly in which the value of the materials and parts used does not exceed 40 % of the value of the finished product
ex 84.08
Engines and motors, excluding reaction engines and gas turbines
Working, processing or assembly in which the value of the non-originating materials and parts used does not exceed 40 % of the value of the finished product, and provided that at least 50 % in value of the materials and partsnote used are originating products
84.16
Calendering and similar rolling machines (other than metal-working and metal-rolling machines and glass working machines) and cylinders therefor
Working, processing or assembly in which the value of the non-originating materials and parts used does not exceed 25 % of the value of the finished product
ex 84.17
Machinery, plant and similar laboratory equipment, whether or not electrically heated, for the treatment of materials by a process involving a change of temperature, for wood, paper pulp, paper and paperboard manufacturing industries
Working, processing or assembly in which the value of the non-originating materials and parts used does not exceed 25 % of the value of the finished product
84.31
Machinery for making or finishing cellulosic pulp, paper or paperboard
Working, processing or assembly in which the value of the non-originating materials and parts used does not exceed 25 % of the value of the finished product
84.33
Paper or paperboard cutting machines of all kinds; other machinery for making up paper pulp, paper or paperboard
Working, processing or assembly in which the value of the non-originating materials and parts used does not exceed 25% of the value of the finished product
ex 84.41
Sewing machines, including furniture specially designed for sewing machines
Working, processing or assembly in which the value of the non-originating materials and parts used does not exceed 40 % of the value of the finished product, and provided that:(a) at least 50% of the materials and parts used for assembly of the head (motor excluded) are originating products, and(b) the thread tension, chrochet and zigzag mechanisms are originating products
87.06
Parts and accessories of the motor vehicles of heading Nos 87.01 to 87.03
Working, processing or assembly in which the value of the materials and parts used does not exceed 15 % of the value of the finished product
ex 95.01
Articles of tortoise-shell
Manufacture from worked tortoise-shell
ex 95.02
Articles of mother of pearl
Manufacture from worked mother of pearl
ex 95.03
Articles of ivory
Manufacture from worked ivory
ex 95.04
Articles of bone (excluding whalebone)
Manufacture from worked bone (excluding whalebone)
ex 95.05
Articles of horn, coral (natural or agglomerated) or of other animal carving material
Manufacture from worked horn, coral (natural or agglomerated) or other animal carving material
ex 95.06
Articles of vegetable carving material (for example, corozo)
Manufacture from worked vegetable carving material (for example, corozo)
ex 95.07
Articles of jet (and mineral substitutes for jet), amber, meerschaum, agglomerated amber and agglomerated meerschaum
Manufacture from worked jet (and mineral substitutes for jet), amber, meerschaum, agglomerated amber and agglomerated meerschaum
ex 98.11
Smoking pipes, pipe bowls, of wood, root or other materials
Manufacture from roughly shaped blocks
...
Customs office:
...
...
(Signature)
Official stamp
DECLARATION BY THE EXPORTER
I, the undersigned, declare that the goods described above situated in ... (4) meet the conditions required for the issue of this certificate (5)
Place and date of signature ...
...
(Signature)
Consignment dated ... No ...
(Optional entry)
(1) Insert either ‘the European Economic Community’ or ‘Iceland’.
(2) For goods in bulk indicate the name of the vessel or the number of the railway wagon or road vehicle.
(3) Complete only where the regulations of the exporting country require.
(4) Insert ‘Iceland’ or ‘the Community’ (if the certificate is applied for in a Member State of the Community).
(5) See the notes overleaf.
REQUEST FOR VERIFICATIONThe undersigned Customs official requests verification of the authenticity and accuracy of this certificate.Place and date of signature...Official stamp...(Official's signature)RESULT OF VERIFICATIONVerification carried out by the undersigned Customs official shows that this movement certificate:1. was issued by the Customs office indicated and that the information contained therein is accurate (1);2. does not meet the requirements as to authenticity and accuracy (see notes appended) (1).Place and date of signature...Official stamp...(Official's signature)(1) Delete where not applicable.I. Goods for which A.IS.1 movement certificates may be issuedThe provisions of this part of the notes will be drawn up by each of the Contracting Parties in accordance with the rules of the Protocol.II. Scope of A.IS.1 movement certificatesGoods originating in Iceland or in the Community and constituting one single shipment which is not split up may be transported through territory other than that of the Community, or of Iceland, Austria, Finland, Portugal, Switzerland or Sweden, with, should the occasion arise, transhipment or temporary warehousing in such territory, provided that the crossing of the latter territory is justified for geographical reasons, that the goods have remained under the surveillance of the Customs authorities in the country of transit or of warehousing, that they have not entered into the commerce of such countries or been delivered for home use there and have not undergone operations other than unloading, reloading or any operation designed to preserve them in good condition.III. Rules for completing A.IS.1 movement certificates1. A.IS.1 movement certificates must be completed in one of the languages in which the Agreement is drawn up, and in accordance with the provisions of the domestic law of the exporting State.2. If A.IS.1 movement certificates are handwritten, they must be completed in ink in printscript. Certificates must not contain erasures or words written over one another. Any alterations must be made by deleting the incorrect particulars and adding any necessary corrections. Any such alteration must be initialed by the person who completed the certificate and endorsed by the Customs authorities.3. Each item on A.IS.1 movement certificates must be preceded by a serial number. A horizontal line must be drawn immediately below the last item.Any unused space must be struck through in such a manner as to make any later addition impossible.4. Goods must be described in accordance with commercial practice and with sufficient detail to enable them to be identified.5. The exporter or carrier may insert a reference to the transport document in the part of the certificate reserved for the declaration by the exporter. The exporter or carrier is also advised to enter the serial number of the A.IS.1 certificate on the relevant transport document.IV. Effect of A.IS.1 movement certificatesWhen correctly used, A.IS.1 movement certificates enable the goods described therein to benefit in the importing country from the provisions of the Agreement.The Customs authorities of the importing country may, if they consider it to be necessary, require submission of other supporting documentary evidence, in particular the relevant transport document.V. Time-limit for submission of A.IS.1 movement certificatesA.IS.1 movement certificates must be submitted to the Customs office in the importing country where the goods are entered within four months of the date of endorsement.VI. PenaltiesPenalties will be imposed on any person who draws up or causes to be drawn up a document which contains incorrect particulars for the purpose of obtaining a movement certificate enabling the goods to be accepted as eligible for preferential treatment.
EEC-ICELAND AGREEMENTExporter (Name, full address, country)A.IS.1 No A.000.000Consignee (Name, full address, country)(Optional information)Certificat de circulation des marchandisesWarenverkehrsbescheinigungCertificato per la circolazione delle merciCertificaat inzake goederenverkeerMovement certificateVarecertifikatVaresertifikatFlutningsskirteiniInitial means of transport (Kind, number or name)(Optional information)Country of destination (1)Intended route (Optional information)For official useSerial numberPackages (2)Description of goodsGross weight (kg) or other measure (hl, cu m, etc.)Number and date of invoices(Optional information)Marks and numbersNumber and kindTotal number of packages...and total quantities...(in words)Remarks(1) Insert either ‘the European Economic Community’ or ‘Iceland’.(2) For goods in bulk indicate the name of the vessel or the number of the railway wagon or road vehicle.
DECLARATION BY THE EXPORTERThe undersigned, exporter of the goods described overleaf,DECLARES that these goods were obtained in ... (1) and that they meet the requirements laid down in Article 1 of the Protocol concerning the definition of the concept of originating products annexed to the Agreement concluded between the Community and Iceland.SPECIFIES as follows the circumstances which have conferred the status of originating products on these goods (2):...SUBMITS the following supporting documents (3):...UNDERTAKES to submit, at the request of the appropriate authorities, any additional supporting evidence which these authorities may require for the purpose of issuing this certificate, and undertakes, if required, to agree to any inspection of his accounts and any check on the processes of manufacture of the above goods, carried out by the said authorities.REQUESTS the issue of an A.IS.1 movement certificate for these goods.Place and date of signature ...(Exporter's signature)(1) Insert ‘Iceland’ or ‘the European Economic Community’ (if goods have been obtained in a Member State of the Community).(2) To be completed in the case of goods other than those referred to in Article 1 (1) (a) and (2) (a) of the Protocol concerning the definition of the concept of originating products annexed to the Agreement concluded between the Community and Iceland.Indicate the products used, their tariff heading, their origin and, where appropriate, the manufacturing process qualifying the goods as originating in the country of manufacture (application of List B or of the conditions laid down in List A), the goods obtained and their tariff heading.If, as a condition for conferring the status of originating product on the goods obtained, the value of the products used may not exceed a certain percentage of the value of these goods, indicate:(a) for the products used:— the value, for customs purposes, where these products originate in third countries;— the earliest verifiable price paid for the said products in the territory of the State in which manufacture takes place, where the products in question are of undetermined origin;(b) for the goods obtained: the ex-works price, i.e. the price paid to the manufacturer in whose undertaking the last working or processing has been carried out, including the value of all the products used in manufacture, less internal taxes refunded or refundable on exportation from the country concerned.(3) For example: import documents, invoices, manufacturer's declarations, etc., referring to the products used in manufacture.
...
Customs office:
...
(Signature)
Official stamp
DECLARATION BY THE EXPORTER
I, the undersigned, declare that the goods described above situated in... (4) meet the conditions required for the issue of this certificate (5)
Place and date of signature ...
...
(Signature)
Consignment dated ... No ...
(Optional entry)
(1) Indicate ‘the European Economic Community’ or the country of destination which has concluded with the country where an application has been made for a movement certificate the Agreement under the terms of which the goods have acquired or retained the character of originating products by implementing Article 2 or, where appropriate, Article 3 of the Protocol concerning the definition of the concept of originating products annexed to the Agreement concluded between, of the one part, the European Economic Community and, of the other part, one of the following six countries, Austria, Finland, Iceland, Portugal, Sweden or Switzerland, or by applying the corresponding provisions governing trade between two of the six countries referred to above.
(2) For goods in bulk indicate the name of the vessel or the number of the railway wagon or road vehicle.
(3) Complete only where the regulations of the exporting country require.
(4) Indicate the country where an application has been made for a movement certificate or ‘the Community’ (if it is required in a Member State of the Community).
(5) The conditions to be met are either:
(a) those of Article 2 and, where appropriate, Article 3 of one of the Protocols relating to the concept of originating products annexed to the Agreements concluded between the European Economic Community and one of the following six countries, Austria, Finland, Iceland, Portugal, Sweden or Switzerland, or
(b) corresponding conditions to those specified above governing trade between two of these six countries.
REQUEST FOR VERIFICATIONThe undersigned Customs official requests verification of the authenticity and accuracy of this certificate.Place and date of signature...Official stamp...(Official's signature)RESULT OF VERIFICATIONVerification carried out by the undersigned Customs official shows that this movement certificate:1. was issued by the Customs office indicated and that the information contained therein is accurate (1);2. does not meet the requirements as to authenticity and accuracy (see notes appended) (1).Place and date of signature...Official stamp...(Official's signature)(1) Delete where not applicable.I. Goods for which A.W.1 movement certificates may be issuedA movement certificate of this kind may only be issued either for goods meeting the conditions specified in Articles 2 and, where appropriate, Article 3 of one of the Protocols relating to the concept of originating products annexed to the Agreements concluded between, of the one part, the European Economic Community and, of the other part, one of the following six countries, Austria, Finland, Iceland, Portugal, Sweden or Switzerland, or for goods meeting the corresponding conditions governing trade between two of the six countries specified above. To determine whether these conditions might be met, it is advisable, before making a declaration with a view to obtaining such a certificate, to examine carefully the contents of the provisions to which reference will be made and, where necessary, to contact the Customs authorities authorized to provide any information on this matter, particularly as regards goods not situated in a customs warehouse and which have to be re-exported in the same state.II. Scope of A.W.1 movement certificatesGoods originating in the Community or in Austria, Finland, Iceland, Portugal, Sweden or Switzerland and constituting one single shipment which is not split up may be transported through territory other than that of the Community, or of Austria, Finland, Iceland, Portugal, Sweden or Switzerland, with, should the occasion arise, transhipment or temporary warehousing in such territory, provided that the crossing of the latter territory is justified for geographical reasons, that the goods have remained under the surveillance of the Customs authorities in the country of transit or of warehousing, that they have not entered into the commerce of such countries or been delivered for home use there and have not undergone operations, other than unloading, reloading or any operation designed to preserve them in good condition.III. Rules for completing A.W.1 movement certificates1. A.W.1 movement certificates must be completed in one of the languages in which the Agreement is drawn up, and in accordance with the provisions of the domestic law of the exporting State.2. If A.W.1 movement certificates are handwritten, they must be completed in ink in printscript. Certificates must not contain erasures or words written over one another. Any alterations must be made by deleting the incorrect particulars and adding any necessary corrections. Any such alteration must be initialed by the person who completed the certificate and endorsed by the Customs authorities.3. Each item on A.W.1 movement certificates must be preceded by a serial number. A horizontal line must be drawn immediately below the last item. Any unused space must be struck through in such a manner as to make any later addition impossible.4. Goods must be described in accordance with commercial practice and with sufficient detail to enable them to be identified.5. The exporter or carrier may insert a reference to the transport document in the part of the certificate reserved for the declaration by the exporter. The exporter or carrier is also advised to enter the serial number of the A.W.1 certificate on the relevant transport document.IV. Effect of A.W.1 movement certificatesWhen correctly used, A.W.1 movement certificates enable the goods described therein to benefit in the importing country from the provisions of the Agreement.The Customs authorities of the importing country may, if they consider it to be necessary, require submission of other supporting documentary evidence, in particular the relevant transport document.V. Time-limit for submission of A.W.1 movement certificateA.W.1 movement certificates must be submitted to the Customs office in the importing country where the goods are entered within four months of the date of endorsement.VI. PenaltiesPenalties will be imposed on any person who draws up or causes to be drawn up a document which contains incorrect particulars for the purpose of obtaining a movement certificate enabling the goods to be accepted as eligible for preferential treatment.
EEC-ICELAND AGREEMENTExporter (Name, full address, country)A.W.1 No A.000.000Consignee (Name, full address, country)(Optional information)Certificat de circulation des marchandisesWarenverkehrsbescheinigungCertificato per la circolazione delle merciCertificaat inzake goederenverkeerMovement certificateVarecertifikatVaresertifikatFlutningsskirteiniInitial means of transport (Kind, number or name)(Optional information)Country of destination (1)Intended route (Optional information)For official useSerial numberPackages (2)Description of goodsGross weight (kg) or other measure (hl, cu m, etc.)Number and date of invoices(Optional information)Marks and numbersNumber and kindTotal number of packages...and total quantities...(in words)Remarks(1) Indicate ‘the European Economic Community’ or the country of destination which has concluded with the country where an application has been made for a movement certificate the Agreement under the terms of which the goods have acquired or retained the character of originating products by implementing Article 2 or, where appropriate, Article 3 of the Protocol concerning the definition of the concept of originating products annexed to the Agreement concluded between, of the one part, the European Economic Community and, of the other part, one of the following six countries, Austria, Finland, Iceland, Portugal, Sweden or Switzerland, or by applying the corresponding provisions governing trade between two of the six countries referred to above.(2) For goods in bulk indicate the lame of the vessel or the number of the railway wagon or road vehicle.
DECLARATION BY THE EXPORTERThe undersigned, exporter of the goods described overleaf,DECLARES that these goods were obtained in ... (1) and that they meet the requirements laid down for the issuing of A.W.I movement certificates (2).SPECIFIES as follows the circumstances which have conferred the status of originating products on these goods (3):.........SUBMITS the following supporting documents (4):.........UNDERTAKES to submit, at the request of the appropriate authorities, any additional supporting evidence which these authorities may require for the purpose of issuing this certificate, and undertakes, if required, to agree to any inspection of his accounts and any check on the processes of manufacture of the above goods, carried out by the said authorities.REQUESTS the issue of an A.W.I movement certificate for these goods.Place and date of signature ......(Exporter's signature)(1) Indicate the country where the application for a movement certificate has been made or ‘the Community’ (if the application has been made in a Member State of the Community).(2) The conditions to be met are either:(a) those of Article 2 and, where appropriate, Article 3 of one of the Protocols relating to the concept of originating products annexed to the Agreements concluded between the European Economic Community and one of the following six countries, Austria, Finland, Iceland, Portugal, Sweden or Switzerland, or(b) corresponding conditions similar to those specified above governing trade between two of these six countries.(3) In the case of goods having undergone processing or working indicate the products used, their tariff heading, their origin and, where appropriate, the manufacturing process, the goods obtained and their tariff heading. If, as a condition for conferring the status of originating product on the goods obtained, the value of the products used may not exceed a certain percentage of the value of these goods, indicate:— for the products used: the value for customs purposes;— for the goods obtained: the ex-works price, i.e. the price paid to the manufacturer in whose undertaking the last working or processing has been carried out, including the value of all the products used in manufacture, less internal taxes refunded or refundable on exportation from the country concerned.(4) For example: import documents (in particular movement certificates issued previously), invoices, manufacturer's declarations, etc., referring to the products used in manufacture or to goods re-exported in the same state.