Commission Decision (EU) 2020/1804

Contents

THE EUROPEAN COMMISSION,Having regard to the Treaty on the Functioning of the European Union,Having regard to Regulation (EC) No 66/2010 of the European Parliament and of the Council of 25 November 2009 on the EU Ecolabel^note, and in particular Article 8(2) thereof,After consulting the European Union Ecolabelling Board,Whereas:

(1)Under Regulation (EC) No 66/2010, the EU Ecolabel may be awarded to those products with a reduced environmental impact during their entire life cycle.

(2)Regulation (EC) No 66/2010 provides that specific EU Ecolabel criteria are to be established according to product groups.

(3)Commission Decision 2009/300/EC^note established criteria and related assessment and verification requirements for the product group ‘televisions’. The period of validity of those criteria and requirements has been extended to 31 December 2020 by Commission Decision (EU) 2019/1134^note.

(4)In order to better reflect best practice in the market for this product group and to take account of innovations introduced in the intervening period, it is appropriate to establish a new set of criteria for ‘televisions’.

(5)The EU Ecolabel Fitness check Report^note of 30 June 2017, reviewing the implementation of Regulation (EC) No 66/2010, concluded on the need to develop a more strategic approach for the EU Ecolabel, also including the bundling of closely related product groups where appropriate.

(6)In line with those conclusions and after consulting the European Union Ecolabelling Board, it is appropriate to revise the criteria for the product group ‘televisions’, including the expansion of its scope to external computer displays and signage displays which are covered by Commission Regulation (EU) 2019/2021^note and Commission Delegated Regulation (EU) 2019/2013^note. In order to reflect that expansion of its scope it is also appropriate to modify the product group name to ‘Electronic Displays’.

(7)The New Circular Economy Action Plan for a cleaner and more competitive Europe^note adopted on 11 March 2020 stipulates that the durability, recyclability and recycled content requirements will be more systematically included in the EU Ecolabel criteria.

(8)The revised EU Ecolabel criteria for electronic displays aim, in particular, at promoting products that are energy efficient, repairable, easy to dismantle (in order to facilitate the recovery of resources from recycling at the end of their useful life), have a minimum recycled content and which may only contain a limited amount of hazardous substances.

(9)The new criteria and related assessment and verification requirements for the product group should remain valid until 31 December 2028, taking into account the innovation cycle for that product group.

(10)For reasons of legal certainty, Decision 2009/300/EC should be repealed.

(11)A transitional period should be allowed for producers whose products have been awarded the EU Ecolabel for televisions on the basis of the criteria set out in Decision 2009/300/EC, so that they have sufficient time to adapt their products to comply with the new criteria and requirements. For a limited period after adoption of this Decision, producers should also be allowed to submit applications based either on the criteria established by Decision 2009/300/EC or on the new criteria stablished by this Decision. EU Ecolabel licences awarded in accordance with the criteria set out in the old Decision should be allowed to be used for 12 months from the date of adoption of this Decision.

(12)The measures provided for in this Decision are in accordance with the opinion of the Committee established by Article 16 of Regulation (EC) No 66/2010,

HAS ADOPTED THIS DECISION:

Article 1 #

The product group ‘electronic displays’ shall comprise televisions, monitors and digital signage displays.

Article 2 #

For the purpose of this Decision, the following definitions shall apply:

(1)‘electronic display’ means a display screen and associated electronics, that as its primary function displays visual information from wired or wireless sources;

(2)‘digital signage display’ means an electronic display that is designed primarily to be viewed by multiple people in non-desktop based environments. Its specifications shall include all of the following features:

(a)unique identifier to enable addressing a specific display screen;

(b)a function disabling unauthorised access to the display settings and displayed image;

(c)network connection (encompassing a hard-wired or wireless interface) for controlling, monitoring or receiving the information to display from remote unicast or multicast but not broadcast sources;

(d)designed to be installed hanging, mounted or fixed to a physical structure for viewing by multiple people;

(e)does not integrate a tuner to display broadcast signals.

(3)‘monitor’ or ‘computer monitor’ means an electronic display intended for one person for close viewing such as in a desk-based environment;

(4)‘television’ means an electronic display designed primarily for the display and reception of audiovisual signals and which consists of an electronic display and one or more tuners/receivers;

(5)‘tuner/receiver’ means an electronic circuit that detects television broadcast signal, such as terrestrial digital or satellite, but not internet unicast, and facilitates the selection of a television channel from a group of network channels.

Article 3 #

In order for a product to be awarded the EU Ecolabel under Regulation (EC) No 66/2010 for the product group ‘electronic displays’, it shall fall within the definition of that product group as specified in Article 1 of this Decision and shall comply with the criteria and related assessment and verification requirements set out in the Annex to this Decision.

Article 4 #

The EU Ecolabel criteria for the product group ‘electronic displays’ and the related assessment and verification requirements shall be valid until 31 December 2028.

Article 5 #

For administrative purposes the code number assigned to the product group ‘electronic displays’ shall be ‘022’.

Article 6 #

Decision 2009/300/EC is repealed.

Article 7 #

1.Notwithstanding Article 6, applications submitted before the date of adoption of this Decision for the EU Ecolabel for the product group ‘televisions’, as defined in Decision 2009/300/EC, shall be evaluated in accordance with the conditions laid down in Decision 2009/300/EC.

2.Applications for the EU Ecolabel for products falling within the product group ‘televisions’ submitted on or within two months from the date of adoption of this Decision may be based either on the criteria set out in this Decision, or on the criteria set out in Decision 2009/300/EC. Those applications shall be evaluated in accordance with the criteria on which they are based.

3.EU Ecolabel licenses awarded on the basis of an application evaluated in accordance with the criteria set out in Decision 2009/300/EC may be used for 12 months from the date of adoption of this Decision.

Article 8 #

This Decision is addressed to the Member States.

EU Ecolabel criteria for awarding the EU Ecolabel to electronic displays

Framework

Aims of the criteria

(1)‘Automatic Brightness Control’ (‘ABC’) means the automatic mechanism that, when enabled, controls the brightness of an electronic display as a function of the ambient light level illuminating the front of the display;

(2)‘default’ referring to a specific setting, means the value of a specific feature as set at the factory and available when the customer uses the product for the first time and after performing a ‘reset to factory settings’ action, if allowed by the product;

(3)‘dismantling step’ means an operation that finishes with the removal of a part or with a change of tool;

(4)‘fast start’ or ‘quick start’ means an enhanced reactivation function capable of completing the transition into ‘on mode’ in a shorter time than that of the normal reactivation function;

(5)‘High Dynamic Range (HDR)’ means a method to increase the contrast ratio of the image of an electronic display by using metadata generated during the creation of the video material and that the display management circuitry interprets to produce a contrast ratio and colour rendering perceived by the human eye as more realistic than that achieved by non HDR-compatible displays;

(6)‘LCD’ means a liquid crystal display;

(7)‘luminance’ means the photometric measure of the luminous intensity per unit area of light travelling in a given direction, expressed in units of candelas per square metre (cd/m²). The term brightness is often used to subjectively qualify the luminance of a display;

(8)‘normal configuration’ or ‘home configuration’, ‘standard mode’, or, for televisions, ‘home mode’ means a display screen setting which is recommended to the end user by the manufacturer from the initial set-up menu or the factory setting that the electronic display has for the intended product use. It must deliver the optimal quality for the end user in a typical domestic or office environment. The normal configuration is the condition in which the declared values for off, standby, networked standby and on mode are measured;

(9)‘on mode’ or ‘active mode’ means a condition in which the electronic display is connected to a power source, has been activated, and is providing one or more of its display functions;

(10)‘proprietary tools’ are tools that are not available for purchase by the general public or for which any applicable patents are not available to licence under fair, reasonable, and non-discriminatory terms;

(11)‘recyclability’ means an ability of a product to be recycled at its end-of-life, based on current practices;

(12)‘spare parts’ are all components or assemblies that can potentially fail and/or that are expected to need replacement within the service life of the product. Other parts which have a lifetime usually exceeding the typical life span of the product are not spare parts;

(13)‘UHD’ means an electronic display able to receive a UHD signal as defined in International Telecommunications Union Recommendation (ITU-R) BT.2020, and to display it on the screen at resolutions of 3840 × 2160 (UHD-4K) and 7680 × 4320 (UHD-8K).

1.Energy consumption

1.1Energy savings

1.2Power management

2.Restricted substances

2.1Excluded or limited substances

2.2Activities to reduce supply chain fluorinated greenhouse gas (GHG) emissions

3.Reparability and commercial guarantee

4.End-of-life management

4.1Material selection and information to improve recyclability

4.2Design for dismantling and recycling

5.Corporate social responsibility

5.1Labour conditions during manufacture

5.2Sourcing of ‘conflict-free minerals’

6.Information criteria

6.1User information

6.2Information appearing on the Ecolabel

—set requirements on energy consumption demanding best available energy efficient classes and set limits on the maximum on mode energy consumption;

—set power management requirements;

—recognise and reward the products with restricted use of hazardous substances;

—set requirements to ensure a minimum content of post-consumer recycled plastics;

—set requirements to ensure reparability through proper design of the product, and availability of repair manual, of repair information and of spare parts;

—set requirements to ensure a proper end-of-life management requesting provision information to improve recyclability, limiting the material selection and promoting an easy to dismantle design;

—set requirements on corporate social responsibility, addressing labour conditions during manufacturing and the sourcing of tin, tantalum, tungsten and gold from conflict-affected and high-risk areas.

The EU Ecolabel criteria target the best electronic displays on the market, in terms of environmental performance. The criteria focus on the main environmental impacts associated with the life cycle of these products and promote circular economy aspects.

In particular, the criteria aim to promote products that are energy efficient, repairable, easy to dismantle (in order to facilitate the recovery of resources from recycling at the end of their useful life), have a minimum recycled content and which may only contain a limited amount of hazardous substances.

To this end, the criteria:

The importance of correct use and disposal of electronic displays on life cycle impacts is also addressed by setting requirements on user instructions and consumer information.

The criteria for awarding the EU Ecolabel to ‘electronic displays’ are as follows:

Assessment and verification: The specific assessment and verification requirements are indicated within each criterion.

Where the applicant is required to provide declarations, documentation, analyses, test reports, or other evidence to show compliance with the criteria, these may originate from the applicant and/or his/her supplier(s) and/or their supplier(s), etc. as appropriate.

Competent bodies shall preferentially recognise attestations which are issued by bodies accredited in accordance with the relevant harmonised standard for testing and calibration laboratories and verifications by bodies that are accredited in accordance with the relevant harmonised standard for bodies certifying products, processes and services.

Where appropriate, test methods other than those indicated for each criterion may be used if the competent body assessing the application accepts their equivalence.

Where appropriate, competent bodies may require supporting documentation and may carry out independent verifications or site inspections to check compliance with these criteria.

Changes in suppliers and production sites pertaining to products to which the EU Ecolabel has been granted shall be notified to Competent Bodies, together with supporting information to enable verification of continued compliance with the criteria.

As a prerequisite the electronic display shall meet all applicable legal requirements of the country or countries in which the product is placed on the market. The applicant shall declare the product's compliance with this requirement.

The following definitions shall apply:

Eu ecolabel criteria

Criterion 1 – Energy consumption

1.1 Energy savings

(a)Electronic displays shall meet the specifications of the Energy Efficiency Index set out in Annex II to Delegated Regulation (EU) 2019/2013 for the energy efficiency classes specified as follows or, alternatively for a more energy efficient class.Until 31 March 2021:

(i)Energy efficiency class E (F for UHD resolutions and above) for televisions;

(ii)Energy efficiency class D (F for UHD resolutions and above) for monitors;

(iii)Energy efficiency class F for digital signage displays.

After 31 March 2021:One of the top 2 energy classes which have registered models^note under the product database^note as from Article 12 of Regulation (EU) 2017/1369^note for a specific resolution and type of display (televisions, monitor or signage displays) on the submission date of the EU Ecolabel application.Noteonce awarded, the applicant shall prove compliance with one of the top 2 energy classes which have registered models ^note at least every 2 years throughout the validity period of its licence.

(b)The maximum on mode power demand in normal configuration shall be ≤ 64 W (125 W for digital signage displays, for UHD resolutions and above).

Assessment and verification: For requirement (a), the applicant shall submit a test report for the electronic display carried out according to the measurement methods indicated in Annex IV to Delegated Regulation (EU) 2019/2013. In addition, evidence of the top classes on EPREL database (with available models for the resolution and type of display model to be awarded) on the date of application and at least every 2 years throughout the validity period of its licence, shall be provided. For requirement (b), the applicant shall submit a test report for the electronic display carried out according to the measurement methods and conditions indicated under points 1 and 2 of Annex III to Regulation (EU) 2019/2021.

NoteFor displays presenting the HDR feature, measurement of the on mode power consumption to meet requirements (a) and (b) shall be done in the normal configuration, in standard dynamic range (SDR).

1.2 Power management

(a)Manual Brightness Control: the electronic display shall allow the user to manually adjust the backlight intensity;

(b)Automatic Brightness Control (ABC): electronic displays with automatic brightness control (ABC) shall meet the requirements to qualify for a 10 % reduction in P_measured described in Annex II of the Regulation (EU) 2019/2021 (Section B, point 1);

(c)Quick start functionality: after enabling the quick start functionality (if the appliance supports the feature), the appliance shall automatically switch back to standby or off mode as a default setting 2 hours after the last user activity at the latest.

Assessment and verification: The applicant shall provide a declaration to certify that the appliance has been shipped with the power management settings stated above.

For requirement (b) the applicant shall submit a test report for the electronic display showing that the conditions described are met. The relevant measurements shall be carried out according to Annex III to Regulation (EU) 2019/2021.

For requirement (c) the applicant shall submit the relevant pages of the product documentation.

Criterion 2 – Restricted substances

2.1 Excluded or limited substances

The presence in the product, or defined sub-assemblies and component parts, of substances that are identified according to Article 59 of Regulation (EC) No 1907/2006 of the European Parliament and of the Council^note or substances and mixtures that meet the criteria for classification according to Regulation (EC) No 1272/2008 of the European Parliament and of the Council^note for the hazard classes, categories and associated hazard statement codes listed in Table 1 shall be restricted in accordance with sub-criterion 2.1(a) and (c). For the purpose of this criterion, Candidate List Substances of Very High Concern (SVHCs) and hazard classes, categories and associated hazard statement codes are grouped in Table 1. Sub criterion 2.1(b) limits the presence of specific substances.

Table 1
Group 1 hazards
Substances that appear on the Candidate List for Substances of Very High Concern (SVHCs)Carcinogenic, Mutagenic and/or Toxic for Reproduction (CMR) Category 1A or 1B CMR: H340, H350, H350i, H360, H360F, H360D, H360FD, H360Fd, H360Df
Group 2 hazards
Category 2 CMR: H341, H351, H361f, H361d, H361fd , H362Category 1 aquatic toxicity: H400, H410Category 1 and 2 acute toxicity: H300, H310, H330Category 1 aspiration toxicity: H304Category 1 Specific Target Organ Toxicity (STOT): H370, H372
Group 3 hazards
Category 2, 3 and 4 aquatic toxicity: H411, H412, H413Category 3 acute toxicity: H301, H311, H331, EUH070Category 2 STOT: H371, H373

2.1(a) Restrictions on Substances of Very High Concern (SVHCs)

Substances meeting the criteria referred to in Article 57 of Regulation (EC) No 1907/2006 that have been identified according to the procedure described in Article 59 of that Regulation and included in the candidate list of substances of very high concern for authorisation shall not be intentionally added to the product at concentrations greater than 0,10 % (weight by weight). The same restriction shall apply to the sub-assemblies forming part of the product that are listed in Table 2. No derogation from this requirement shall be granted.

Table 2
Printed Circuit Boards (Printed Wiring Boards, populated motherboards, power boards (power supply units) and module boards ) >10 cm²
Electrical wiring/cables (aggregated)
External cables (Power cable (AC and DC power cords), modem cable and LAN cable if applicable, HDMI cable and RCA cable)
External housing (Back cover, front cover (bezel decoration) and stands)
External housing of remote control
LED backlights (LED arrays)

In communicating this requirement to suppliers of the listed sub-assemblies/component parts, applicants may pre-screen the REACH Candidate List using the IEC 62474 declarable substance list^note. The screening shall be based on identification of the potential for presence of substances in the product.

Assessment and verification: The applicant shall compile declarations of the non-presence of SVHCs at or above the specified concentration limit for the product and the sub-assemblies identified in Table 2. Declarations shall be with reference to the latest version of the candidate list published by ECHA^noteon the submission date of the EU Ecolabel application. Where declarations are made based on a pre-screening of the candidate list using IEC 62474, the screened list given to sub-assembly suppliers shall also be provided by the applicant. The version of the IEC 62474 declarable substance list used shall reflect the latest version of the candidate list.

The declarations can also be provided directly to competent bodies by any supplier in the applicant’s supply chain.

2.1(b) Restrictions on the presence of specific substances

The hazardous substances specified in Table 3 shall not be intentionally added to or formed in the specified sub-assemblies and component parts at or above the stipulated concentration limits.

Table 3
Substance group	Scope of restriction (substances and sub-assemblies/component parts)	Concentration limits (where applicable)
(i) Metal solder and contacts	Exemption 8b in accordance with Directive 2011/65/EU of the European Parliament and of the Council^noterelating to the use of cadmium in electrical contacts shall not be permitted.	0,01 % w/w Test method: IEC 62321-5
(ii) Polymer stabilisers, colourants and contaminants	The following organotin stabiliser compounds classified with Group 1 and 2 hazards shall not be present in external cables:Dibutyltin oxideDibutyltin diacetateDibutyltin dilaurateDibutyltin maleateDioctyl tin oxideDioctyl tin dilaurate	n/a
External housing of the display shall not contain the following colourants:Azo dyes that may cleave to the carcinogenic aryl amines listed in Appendix 8 of the Regulation (EC) No 1907/2006, and/or Colourant compounds included in the IEC 62474 declarable substances list.	n/a
Polycyclic Aromatic Hydrocarbons (PAHs) classified with Group 1 and 2 hazards shall not be present at concentrations greater than or equal to individual and sum total concentration limits in any external plastic or man-made rubber surfaces of:External cablesExternal housing of the remote controlRubber parts of the remote controlThe presence and concentration of the following PAHs shall be verified:PAHs restricted by the Regulation (EC) No 1907/2006:Benzo[a]pyreneBenzo[e]pyreneBenzo[a]anthraceneChrysenBenzo[b]fluorantheneBenzo[j]fluorantheneBenzo[k]fluorantheneDibenzo[a,h]anthraceneAdditional PAHs subject to restriction:AcenaphtheneAcenaphthyleneAnthraceneBenzo[ghi]peryleneFluorantheneFluoreneIndeno[1,2,3-cd]pyreneNaphthalenePhenanthrenePyrene	The individual concentration limits for PAHs restricted under Regulation (EC) No 1907/2006 shall be 1 mg/kgThe sum total concentration limit for the 18 listed PAHs shall not be greater than 10 mg/kgTest method: AfPS GS 2014:01 PAK.
(iii) Biocidal products	Biocidal products intended to provide an anti-bacterial function shall not be incorporated into External housing and rubber parts of the remote control.	n/a
(iv) Mercury in backlights	Exemption 3 in accordance with Directive 2011/65/EU relating to the use of mercury in cold cathode fluorescent lamps and external electrode fluorescent lamps (CCFL and EEFL) shall not be permitted.	n/a
(v) Glass fining agents	Arsenic and its compounds shall not be used in the manufacturing of LCD display unit glass and screen cover glass.	0,0050 % w/w
(vi) Chlorine-based plastics	Plastic parts >25 g must not contain chlorinated polymers.Note: For this specific sub-requirement, plastic cable housing is not considered as a ‘plastic part’.	n/a
(vii) Phthalates	Diisononyl phthalate (DINP), Diisodecyl phthalate (DIDP) shall not be used in external power cables.	n/a

Assessment and verification:The applicant shall provide declarations of compliance and test reports according to the requirements in Table 3. Test reports, where required, shall be valid at the time of application for the relevant production model and all associated suppliers. Where sub-assemblies or component parts with the same technical specifications originate from a number of different suppliers, tests where applicable shall be carried out on parts from each supplier. The declarations/test reports can also be provided directly to competent bodies by any supplier in the applicant’s supply chain.

2.1(c) Restrictions on substances classified under Regulation (EC) No 1272/2008

Flame retardants and plasticisers that are assigned any of the hazard classes, categories and associated hazard statement codes listed in Table 1, in accordance with Regulation (EC) No 1272/2008 shall not be intentionally added to sub-assemblies and component parts defined in Table 4 at or above a concentration limit of 0,10 % (weight by weight).

Table 4
Parts containing flame retardants
Printed Circuit BoardsExternal cablesExternal housing of the display
Parts containing plasticisers
External cablesInternal electrical wiringExternal housing of the display

Derogations for the use of hazardous flame retardants and plasticisers

The use of flame retardants and plasticisers meeting the criteria for classification with any of the hazard classes, categories and associated hazard statement codes listed in Table 1 is derogated from the requirements of criterion 2.1(c) provided that they meet the conditions specified in Table 5.

Table 5
Substance /mixture type	Applicability	Derogated hazard class, category and hazard statement code and derogation conditions
Flame retardants	Printed Circuit Boards	Flame retardants classified with Group 3 hazards and TBBPA (classified with Group 2) are derogated for use.
External cables	Flame retardant and its synergist classified with Group 3 hazard and Antimony trioxide (Sb₂O₃) classified with Group 2 hazards are derogated for use.
External housing of the display	Flame retardants and their synergists classified with Group 2 and 3 hazards are derogated for use.
Plasticisers	External cables, internal electrical wiring and external housing of the display	Plasticisers classified with Group 3 hazards are derogated for use.

Assessment and verification: The applicant shall provide a declaration of compliance with criterion 2.1(c). The declaration shall be supported by the list of flame retardants, plasticisers and metal additives and coatings used in the sub-assemblies and component parts listed in Table 4 together with SDS supporting their hazard classification or non-classification.

For the derogated substances and mixtures listed in Tables 5, the applicant shall provide proof that all the derogation conditions are met. Where test reports are required, they shall be valid at the time of application for a production model.

The declarations/test reports can also be provided directly to competent bodies by any supplier in the applicant’s supply chain.

2.2 Activities to reduce supply chain fluorinated greenhouse gas (GHG) emissions

(a)Specification of which of the F-GHGs are used and which are being reduced;

(b)Annual F-GHG emissions intensity (in kg CO₂eq per m² of flat panel displays (array glass) produced) across manufacturing sites for the most recent year;

(c)Indication of the destruction or removal efficiencies (DREs) of installed abatement systems for each of the F-GHGs used.

The applicant shall gather the following information from their LCD display suppliers by which they shall demonstrate their activities to reduce GHG emissions from the production process, including the performance of abatement systems they have installed:

Assessment and verification: The applicant shall provide the supporting documentation containing the information above from their display suppliers to the competent body. The documentation can also be provided directly to competent bodies by any supplier in the applicant’s supply chain.

Criterion 3 – Reparability and commercial guarantee

(a)Design for repair:

(i)the following spare parts of electronic displays shall be accessible and exchangeable by the use of commercially available tools (i.e. all tools except proprietary tools, e.g. screwdriver, spatula, pliers, or tweezers):

—screen assembly and LED backlight,

—stands, and

—power and control circuit boards;

(ii)adhesives which need to be removed with heat or chemicals shall not be used to fix the back cover of the electronic display;

(iii)casing parts are free of electronic assemblies which cannot be removed with use of commercially available tools.

(a)An exploded diagram showing how casing parts, chassis and electric/electronic assemblies are assembled in the product;

(b)Repair manual: the applicant shall provide clear disassembly and repair instructions (e.g. hard or soft copy, video) and make them publicly available at no additional cost, to enable a non-destructive disassembly of products for the purpose of replacing key components or parts for upgrades or repairs;

(b)A copy of the commercial guarantee;

(c)Repair Service / Information: information should be included in the user instructions or the manufacturer’s website to let the user know where to go to obtain professional repairs and servicing of the electronic display, including contact details as appropriate and the recommended manufacturer price of spare parts. During the guarantee period referred to in (e) this may be limited to the applicant’s Authorized Service Providers;

(c)A copy of the repair manual;

(d)Availability of spare parts: the applicant shall ensure that original or backwardly compatible spare parts (those mentioned in (a)(i) and those included under Annex II (D. Material efficiency requirements. Point 5. (A) Availability of spare parts) of Regulation (EU) 2019/2021, as a minimum) are publicly available for at least 8 years following the end of the model production;

(d)A copy of the user instructions;

(e)Commercial guarantee: without prejudice to the legal obligations of the seller under national law on legal and commercial guarantees, the applicant shall provide at no additional cost a minimum of a 3-year commercial guarantee during which time they shall ensure the goods are in conformity with the contract of sale. This guarantee shall include a service agreement with pick-up and return for cases where repair in not done on-site;

(e)A public list of authorised dealers of spare parts.

(f)Information on repair, spare parts and commercial guarantee shall be provided in accessible formats for persons with disabilities upon request, in accordance with the accessibility requirements in Directive (EU) 2019/882.

Assessment and verification: The applicant shall declare the compliance of the product with these requirements to the competent body. Additionally, the applicant shall provide:

Criterion 4 – End of life management

4.1 Material selection and information to improve recyclability

(a)Recyclability of plastics:

(i)Parts with a weight greater than 25 grams shall consist of a single polymer or a polymer blend or alloy that are recyclable;

(ii)The presence of paints and coatings shall not significantly impact upon the resilience of plastic recyclate produced from these components upon recycling and when tested according to ISO 180 [1] or equivalent;

(iii)Plastic enclosures shall not contain moulded-in or glue-on metal unless the metal inserts can be removed with commercially available tools;

(iv)Casings, enclosures and bezels incorporating flame retardants shall be recyclable.Note [1]For the purposes of this criterion a significant impact is defined as a > 25 % reduction in the notched izod impact of a recycled resin as measured using ISO 180.

(b)Information to facilitate recycling:

1.Plastic parts with a mass greater than 25 grams shall be marked in accordance with ISO 11469 and ISO 1043, Sections 1 and 4. For plastic parts > 100 grams, the markings should be large enough and located in a visible position in order to be easily identified.Exemptions specified in in Annex II of the Commission Regulation (EU) 2019/2021 (Section D, point 2) apply for this requirement.

2.Applicant shall make available to professional operators of the waste sector, in a website and free of charge, information relevant for dismantling and recovery. This should include at least: (a) a diagram of the product showing the location of the plastic components containing flame retardants; (b) the location of components containing the toxic or ecotoxic substances.

(c)Recycled content:The product shall contain on average a minimum 10 % post-consumer recycled plastic, measured as a percentage of total plastic (by weight) in the product excluding Printed Wiring Boards. Where the recycled content is greater than 25 % a declaration may be made in the text box accompanying the Ecolabel (see Criterion 6.2). Products with a metal casing are exempt from this sub-criterion.

—A declaration from an experienced plastics recycler or permitted treatment operator in accordance with Article 23 of Directive 2008/98/EC of the European Parliament and of the Council^note;

—Test results from an independent laboratory or an experienced plastics recycler;

—Peer and industry reviewed technical literature applicable to EU.

Assessment and verification: The applicant shall provide an exploded diagram of the electronic display in written or audio-visual format. This shall identify the plastic parts greater than 25 grams by their weight, their polymer composition, and their ISO 11469 and 1043 markings. The dimensions and positions of the marking shall be illustrated and, where exemptions apply, technical justifications provided.

Applicant shall provide the available information relevant for dismantling and recovery for professional operators and the website where is located.

The applicant shall demonstrate recyclability by providing evidence that the plastics either individually or combined do not impact the technical properties of the resulting recycled plastics in such a way that they cannot be used again in electronic products. This could include:

The applicant shall provide third party verification and traceability for post-consumer recycled content. Certificate of recyclers pursuant to the EuCertPlast certification scheme or equivalent could be used to support verification.

4.2 Design for dismantling and recycling

(a)For the following target parts, as relevant to the product, a manual dismantling shall be carried out by one person (i.e. not more than one snap-on connection has to be loosened at the same time) using widely used commercially available tools (i.e. pliers, screw-drivers, cutters and hammers as defined by ISO 5742, ISO 1174, ISO 15601):

(i)Printed Wiring Boards > 10 cm²;

(ii)Thin Film Transistor (TFT) unit > 100 cm² and film conductors;

(iii)Polymethyl Methacrylate (PMMA) board light guide.

(b)At least one of the following optional components (if applicable) shall also be possible to manually disassemble using common commercially available tools:

(i)LED backlight units;

(ii)Speaker unit magnets (for display sizes greater than or equal to 25 inches);

(iii)HDD drive (if applicable in the case of smart devices).

Assessment and verification: The applicant shall provide:

A test report detailing the dismantling sequence, including a detailed description of the specific dismantling steps, tools and procedures, for the components listed in (a) and the optional component(s) selected from (b).

Criterion 5 – Corporate social responsibility

5.1 Labour conditions during manufacture

(a)Child Labour:

(i)Minimum Age Convention, 1973 (No 138);

(ii)Worst Forms of Child Labour Convention, 1999 (No 182);

(a)Working Hours:

(i)ILO Hours of Work (Industry) Convention, 1919 (No 1);

(b)Forced and Compulsory Labour:

(i)Forced Labour Convention, 1930 (No 29) and 2014 Protocol to the Forced Labour Convention;

(ii)Abolition of Forced Labour Convention, 1957 (No 105);

(b)Remuneration:

(i)ILO Minimum Wage Fixing Convention, 1970 (No 131)

(ii)Living wage: The applicant shall ensure that wages (excluding any taxes, bonuses, allowances, or overtime wages) paid for a normal work week (not exceeding 48 hours) shall be sufficient to afford basic needs (housing, energy, nutrition, clothing, health care, education, potable water, childcare, and transportation) of worker and of a family of four people, and to provide some discretionary income. Implementation should be audited with reference to SA8000^note guidance on ‘Remuneration’;

(c)Freedom of Association and Right to Collective Bargaining:

(i)Freedom of Association and Protection of the Right to Organise Convention, 1948 (No 87);

(ii)Right to Organise and Collective Bargaining Convention, 1949 (No 98);

(c)Health & Safety:

(i)ILO Safety in the use of chemicals at work Convention, 1990 (No 170);

(ii)ILO Occupational Safety and Health Convention, 1981 (No 155).

(d)Discrimination:

(i)Equal Remuneration Convention, 1951 (No 100);

(ii)Discrimination (Employment and Occupation) Convention (No 111).

Having regard to the International Labour Organisation’s (ILO) Tripartite Declaration of Principles concerning Multinational Enterprises and Social Policy, the UN Global Compact (Pillar 2), the UN Guiding Principles on Business and Human Rights and the OECD Guidelines for Multi-National Enterprises, the applicant shall obtain third party verification supported by site audits that the applicable principles included in the ILO fundamental conventions and the supplementary provisions below identified have been respected at the final assembly plant(s) for the product.

Fundamental conventions of the ILO:

Supplementary provisions:

In locations where the right to freedom of association and collective bargaining are restricted under law, the company will not restrict workers from developing alternative mechanisms to express their grievances and protect their rights regarding working conditions and terms of employment, and shall recognise legitimate employee associations with whom it can enter into dialogue about workplace issues.

The audit process shall include consultation with external industry independent organisation stakeholders in local areas around sites, including trade unions, community organisations, NGOs and labour experts. Meaningful consultations shall take place with at least two stakeholders from two different subgroups.

During the validity period of the EU Ecolabel, the applicant shall publish aggregated results and key findings from the audits (including details on (a) how many and how serious violations of each labour rights and OHS standard; (b) strategy for remediation – where remediation includes prevention per UNGP concept; (c) assessment of root causes of persistent violations resulting from the stakeholder consultation – who was consulted, what issues were raised, how did this influence the corrective action plan), online in order to provide evidence of their performance to interested consumers.

Assessment and verification: the applicant shows compliance with these requirements by providing copies of the most recent version of their code of conduct which must be consistent with the provisions specified above and by providing supporting audit reports for each final product assembly plant for the model(s) to be ecolabelled, together with a web link to where online publication of the results and findings can be found.

Third party site audits shall be carried out by auditors qualified to assess the compliance of the industry manufacturing sites with social standards or codes of conduct or, in countries where ILO Labour Inspection Convention, 1947 (No 81) has been ratified and ILO supervision indicates that the national labour inspection system is effective and the scope of the inspection system covers the areas listed above^note, by labour inspector(s) appointed by a public authority.

Valid certifications from third party schemes or inspection processes that, together or in part, audit compliance with the applicable principles of the listed fundamental ILO Conventions and the supplementary provisions on working hours, remuneration and health & safety and consultation with external stakeholders, shall be accepted. These certifications shall be not more than 12 months old.

5.2 Sourcing of conflict-free minerals

(i)conducting due diligence in line with the OECD Due Diligence Guidance for Responsible Supply Chains of Minerals from Conflict-Affected and High-Risk Areas; and

(ii)promoting responsible mineral production and trade within conflict-affected and high-risk areas for the identified minerals used in components of the product in accordance with OECD.

—a report describing their due diligence activities along the supply chain for the four minerals identified. Supporting documents such as certifications of conformity issued by the European Union’s scheme shall also be accepted.

—Identification of component(s) which contain the identified minerals, and their supplier(s), as well as the supply chain system or project used for responsible sourcing.

The applicant shall support the responsible sourcing of tin, tantalum, tungsten and their ores and gold from conflict-affected and high-risk areas by:

Assessment and verification: The applicant shall declare the compliance with these requirements together with the following supporting information:

Criterion 6 – Information criteria

6.1 User information

(a)Energy consumption: Energy Efficiency Class according to Delegated Regulation (EU) 2019/2013. The maximum power demand in each operating mode. In addition, instructions shall be provided on how to use the device’s energy saving mode and Information that energy efficiency cuts energy consumption and thus saves money by reducing electricity bills;

(b)The following indications on how to reduce power consumption:

(i)Turning the product off at its mains supply or using the hard off-switch (where one is fitted) will cut energy use to (near) zero;

(ii)Putting the product into standby mode will reduce energy consumption, but will still draw some power;

(iii)Note that screen savers (computer monitors) can stop displays from powering down into a lower power mode when not in use. Ensuring that screen savers are not activated on displays can therefore reduce energy use;

(iv)Note that a Quick Start Function might cause increased power consumption;

(v)Note that integrated functions, such as a receiver for digital signals (e.g. DVB-T) or hard disk recorders may help reducing power consumption if, as a result, an external device becomes redundant.

(c)Network connectivity: Information on how to deactivate networking functions;

(d)The position of the hard off-switch;

(e)Information that extension of the product’s lifetime reduces the overall environmental impacts;

(f)The following indications on how to prolong the lifetime of the product:

(i)Clear disassembly and repair to enable a non-destructive disassembly of products for the purpose of replacing key components or parts for repair;

(ii)Information to let the user know where to go to obtain professional repairs and servicing of the product, including contact details as appropriate;

(g)End-of-life instructions for the proper disposal of the product at civic amenity sites or through retailer take-back schemes as applicable, which shall comply with Directive 2012/19/EU of the European Parliament and of the Council;

(h)Information that the product has been awarded the EU Ecolabel with a brief explanation as to what this means together with an indication that more information on the Ecolabel can be found at the website address http://www.ecolabel.eu;

(i)Any print-versions of instruction/repair manual(s) should contain recycled content and should not contain chlorine bleached paper. To save resources, online versions should be preferred.

The product shall be sold with relevant user information, which provides advice on the product's proper environmental use and disposal.

The product packaging and/or documentation accompanying the product shall provide contact details (telephone and/or email) and a reference to online information for consumers that have enquiries or need specific advice regarding use or disposal of the electronic display.The information shall include, as a minimum, the following information (when applicable):

Assessment and verification: The applicants shall declare the compliance of the product with these requirements to the competent body and shall provide a link to the online-version or a copy of the user instructions / repair manual to the Competent Body.

6.2 Information appearing on the EU Ecolabel

(a)high energy efficiency;

(b)restriction of hazardous substances;

(c)designed to be easy to repair and recycle;

(d)contains xy % post-consumer recycled plastic (only when greater than 25 % as a percentage of the total plastic).

If the optional label with text box is used, it shall contain three of the following texts:

The applicant shall follow the instructions on how to properly use the EU Ecolabel logo provided in the EU Ecolabel Logo Guidelines:

http://ec.europa.eu/environment/ecolabel/documents/logo_guidelines.pdf

Assessment and verification: The applicant shall provide a declaration of compliance with this criterion, supported by a high resolution image/artwork of the product packaging that clearly shows the label, the registration/licence number and, where relevant, the statements that can be displayed together with the label.

Defined terms · 15

Show every defined term

active mode
means a condition in which the electronic display is connected to a power source, has been activated, and is providing one or more of its display functions;
Automatic Brightness Control
(‘ABC’) means the automatic mechanism that, when enabled, controls the brightness of an electronic display as a function of the ambient light level illuminating the front of the display;
computer monitor
means an electronic display intended for one person for close viewing such as in a desk-based environment;
digital signage display
means an electronic display that is designed primarily to be viewed by multiple people in non-desktop based environments.
dismantling step
means an operation that finishes with the removal of a part or with a change of tool;
electronic display
means a display screen and associated electronics, that as its primary function displays visual information from wired or wireless sources;
High Dynamic Range (HDR)
means a method to increase the contrast ratio of the image of an electronic display by using metadata generated during the creation of the video material and that the display management circuitry interprets to produce a contrast ratio and colour rendering perceived by the human eye as more realistic than that achieved by non HDR-compatible displays;
home mode
means a display screen setting which is recommended to the end user by the manufacturer from the initial set-up menu or the factory setting that the electronic display has for the intended product use.
LCD
means a liquid crystal display;
luminance
means the photometric measure of the luminous intensity per unit area of light travelling in a given direction, expressed in units of candelas per square metre (cd/m2).
quick start
means an enhanced reactivation function capable of completing the transition into ‘on mode’ in a shorter time than that of the normal reactivation function;
recyclability
means an ability of a product to be recycled at its end-of-life, based on current practices;
television
means an electronic display designed primarily for the display and reception of audiovisual signals and which consists of an electronic display and one or more tuners/receivers;
tuner/receiver
means an electronic circuit that detects television broadcast signal, such as terrestrial digital or satellite, but not internet unicast, and facilitates the selection of a television channel from a group of network channels.
UHD
means an electronic display able to receive a UHD signal as defined in International Telecommunications Union Recommendation (ITU-R) BT.2020, and to display it on the screen at resolutions of 3840 × 2160 (UHD-4K) and 7680 × 4320 (UHD-8K).

Connections

Defined terms · 15

History · 2 versions

Key facts