Council Decision (EU) 2019/1355

Contents

Article 1 #

The position to be taken on behalf of the Union in the 2019 annual meeting of the EPA Committee set up by the stepping stone Economic Partnership Agreement between Côte d’Ivoire, of the one part, and the European Community and its Member States, of the other part, as regards the adoption of a decision of the EPA Committee on Protocol 1 to the Agreement concerning the definition of the concept of ‘originating products’ and methods of administrative cooperation, shall be based on the draft decision of the EPA Committee attached to this Decision.

Article 2 #

The Decision will enter into force on the day of its adoption.

Annex I

Introductory notes to the list in annex II to the protocol

Note 1:The list in Annex II to this Protocol sets out, for all products, the requisite conditions for the products to be considered as sufficiently worked or processed within the meaning of Article 4 of the Protocol.

Note 2:

1.The first two columns in the list describe the product obtained. The first column gives the heading number or chapter number used in the Harmonised System and the second column gives the description of goods used in that system for that heading or chapter. For each entry in the first two columns, a rule is specified in columns 3 or 4. Where, in some cases, the entry in the first column is preceded by an ‘ex’, this signifies that the rules in columns 3 or 4 apply only to the part of that heading as described in column 2.

2.Where several heading numbers are grouped together in column 1 or a chapter number is given and the description of products in column 2 is therefore given in general terms, the adjacent rules in column 3 or 4 apply to all products which, under the Harmonised System, are classified in headings of the chapter or in any of the headings grouped together in column 1.

3.Where there are different rules in the list applying to different products within a heading, each indent contains the description of that part of the heading covered by the adjacent rules in columns 3 or 4.

4.Where, for an entry in the first two columns, a rule is specified in both columns 3 and 4, the exporter may opt to apply either the rule set out in column 3 or that set out in column 4. If no origin rule is given in column 4, the rule set out in column 3 has to be applied.

Note 3:

1.The provisions of Article 4 of this Protocol, concerning products having acquired originating status which are used in the manufacture of other products, apply regardless of whether this status has been acquired inside the factory where these products are used or in another factory in the European Union or in Côte d'Ivoire.For example:An engine of heading 8407, for which the rule states that the value of the non-originating materials which may be incorporated may not exceed 40 % of the ex-works price, is made from ‘other alloy steel roughly shaped by forging’ of heading ex7224.If that forging has been forged in the European Union from a non-originating ingot, it has already acquired originating status by virtue of the rule for heading ex7224 in the list. The forging can then count as originating in the value calculation for the engine, regardless of whether it was produced in the same factory or in another factory in the European Union. The value of the non-originating ingot is thus not taken into account when adding up the value of the non-originating materials used.

2.The rule in the list represents the minimum amount of working or processing required, and the carrying out of more working or processing also confers originating status; conversely, the carrying out of less working or processing cannot confer originating status. In other words, if a rule provides that non-originating material, at a certain level of manufacture, may be used, the use of such material at an earlier stage of manufacture is allowed, and the use of such material at a later stage is not.

3.Without prejudice to Note 3.2, where a rule states that ‘materials of any heading’ may be used, materials of the same heading as the product may also be used, subject, however, to any specific limitations which may also be contained in the rule. However, the expression ‘manufacture from materials of any heading, including other materials of heading …’ means that only materials classified in the same heading as the product of a description other than that of the product as given in column 2 of the list may be used.

4.When a rule in the list specifies that a product may be manufactured from more than one material, this means that one or more materials may be used. It does not require that all be used.For example:The rule for fabrics of headings 5208 to 5212 indicates that natural fibres may be used and that chemical materials, among other materials, may also be used. This does not mean that both have to be used; it is possible to use one or the other or both.

5.Where a rule in the list specifies that a product must be manufactured from a particular material, the condition obviously does not prevent the use of other materials which, because of their inherent nature, cannot satisfy the rule (see also Note 6.3 below in relation to textiles).For example:The rule for prepared foods of heading 1904, which specifically excludes the use of cereals and their derivatives, does not prevent the use of mineral salts, chemicals and other additives which are not produced from cereals.However, this does not apply to products which, although they cannot be manufactured from the particular materials specified in the list, can be produced from a material of the same nature at an earlier stage of manufacture.For example:In the case of an article of apparel of ex Chapter 62 of the Harmonised System made from non-woven materials, if the use of only non-originating yarn is allowed for this class of article, it is not possible to start from non-woven cloth – even if non-woven cloths cannot normally be made from yarn. In such cases, the starting material would normally be at the stage before yarn – that is the fibre stage.

6.Where, in a rule in the list, two percentages are given for the maximum value of non-originating materials that can be used, then those percentages may not be added together. In other words, the maximum value of all the non-originating materials used may never exceed the higher of the percentages given. Furthermore, the individual percentages must not be exceeded in relation to the particular materials to which they apply.

Note 4:

1.The term ‘natural fibres’ is used in the list to refer to fibres other than artificial or synthetic fibres. It is restricted to the stages before spinning takes place, including waste, and, unless otherwise specified, includes fibres which have been carded, combed or otherwise processed, but not spun.

2.The term ‘natural fibres’ includes horsehair of heading 0511, silk of headings 5002 and 5003 as well as wool fibres and fine or coarse animal hair of headings 5101 to 5105, cotton fibres of headings 5201 to 5203 and other vegetable fibres of headings 5301 to 5305.

3.The terms ‘textile pulp’, ‘chemical materials’ and ‘paper-making materials’ are used in the list to describe the materials not classified in Chapters 50 to 63 of the Harmonised System which can be used to manufacture artificial, synthetic or paper fibres or yarns.

4.The term ‘man-made staple fibres’ is used in the list to refer to synthetic or artificial filament tow, staple fibres or waste, of headings 5501 to 5507.

Note 5:

1.Where, for a given product in the list, reference is made to this Note, the conditions set out in column 3 shall not be applied to any basic textile materials used in the manufacture of this product, which, taken together, represent 10 % or less of the total weight of all the basic textile materials used (see also Notes 5.3 and 5.4 below.)

2.However, the tolerance mentioned in Note 5.1 may only be applied to mixed products which have been made from two or more basic textile materials.The following are the basic textile materials:

—silk,

—synthetic man-made staple fibres of polyacrylonitrile,

—synthetic man-made staple fibres of polyimide,

—synthetic man-made staple fibres of polytetrafluoroethylene,

—synthetic man-made staple fibres of polyphenylene sulphide,

—synthetic man-made staple fibres of polyvinyl chloride,

—other synthetic man-made staple fibres,

—artificial man-made staple fibres of viscose,

—jute and other textile bast fibres,

—other artificial man-made staple fibres,

—wool,

—sisal and other textile fibres of the genus Agave,

—yarn made of polyurethane segmented with flexible segments of polyether whether or not gimped,

—coarse animal hair,

—coconut, abaca, ramie and other vegetable textile fibres,

—yarn made of polyurethane segmented with flexible segments of polyester whether or not gimped,

—fine animal hair,

—synthetic man-made filaments,

—products of heading 5605 (metallised yarn) incorporating strip consisting of a core of aluminium foil or of a core of plastic film whether or not coated with aluminium powder, of a width not exceeding 5 mm, sandwiched by means of a transparent or coloured adhesive between two layers of plastic film,

—horsehair,

—artificial man-made filaments,

—other products of heading 5605.

—cotton,

—current conducting filaments,

—paper-making materials and paper,

—synthetic man-made staple fibres of polypropylene,

—flax,

—synthetic man-made staple fibres of polyester,

—true hemp,

—synthetic man-made staple fibres of polyamide,

For example:A yarn of heading 5205 made from cotton fibres of heading 5203 and synthetic staple fibres of heading 5506 is a mixed yarn. Therefore, non-originating synthetic staple fibres that do not satisfy the origin rules (which require manufacture from chemical materials or textile pulp) may be used up to a weight of 10 % of the yarn.For example:A woollen fabric of heading 5112 made from woollen yarn of heading 5107 and synthetic yarn of staple fibres of heading 5509 is a mixed fabric. Therefore, synthetic yarn which does not satisfy the origin rules (which require manufacture from chemical materials or textile pulp) or woollen yarn which does not satisfy the origin rules (which require manufacture from natural fibres, not carded or combed or otherwise prepared for spinning) or a combination of the two may be used, provided that their total weight does not exceed 10 % of the weight of the fabric.For example:Tufted textile fabric of heading 5802 made from cotton yarn of heading 5205 and cotton fabric of heading 5210 is only a mixed product if the cotton fabric is itself a mixed fabric made from yarns classified in two separate headings or if the cotton yarns used are themselves mixtures.For example:If the tufted textile fabric concerned had been made from cotton yarn of heading 5205 and synthetic fabric of heading 5407, then, obviously, the yarns used are two separate basic textile materials and the tufted textile fabric is, accordingly, a mixed product.

3.In the case of products incorporating ‘yarn made of polyurethane segmented with flexible segments of polyether, whether or not gimped’, the tolerance is 20 % in respect of this yarn.

4.In the case of products incorporating ‘strip consisting of a core of aluminium foil or of a core of plastic film whether or not coated with aluminium powder, of a width not exceeding 5 mm, sandwiched by means of an adhesive between two layers of plastic film’, the tolerance is 30 % in respect of the strip.

Note 6:

1.In the case of those textile products which are marked in the list by a footnote referring to this Introductory Note, textile trimmings and accessories which do not satisfy the rule set out in the list in column 3 for the made up products concerned may be used provided that their weight does not exceed 10 % of the total weight of all the textile materials incorporated.The textile trimmings and accessories concerned are those classified in Chapters 50 to 63 of the Harmonised System. Linings and interlinings are not be regarded as trimmings or accessories.

2.Any non-textile trimmings and accessories or other materials used which contain textiles do not have to satisfy the conditions set out in column 3 even though they fall outside the scope of Note 3.5.

3.In accordance with Note 3.5, any non-originating non-textile trimmings and accessories or other product which do not contain any textiles may, in all cases, be used freely where they cannot be made from the materials listed in column 3.For example^note, if a rule in the list says that for a particular textile item, such as a blouse, yarn must be used, this does not prevent the use of metal items, such as buttons, because they cannot be made from textile materials.

4.Where a percentage rule applies, the value of trimmings and accessories must be taken into account when calculating the value of the non-originating materials incorporated.

Note 7:

1.For the purposes of headings ex2707, 2713 to 2715, ex2901, ex2902 and ex3403, the ‘specific processes’ are as follows:

(a)vacuum distillation;

(b)redistillation by a very thorough fractionation process;

(c)cracking;

(d)reforming;

(e)extraction by means of selective solvents;

(f)the process comprising all the following operations: processing with concentrated sulphuric acid, oleum or sulphuric anhydride, neutralisation with alkaline agents, decolourisation and purification with naturally active earth, activated earth, activated charcoal or bauxite;

(g)polymerisation;

(h)alkylation;

(i)isomerisation.

2.For the purposes of headings 2710 to 2712, the ‘specific processes’ are as follows:

(a)vacuum distillation;

(b)redistillation by a very thorough fractionation process;

(c)cracking;

(d)reforming;

(e)extraction by means of selective solvents;

(g)polymerisation;

(h)alkylation;

(i)isomerisation;

(j)in respect of heavy oils falling within heading ex2710 only, desulphurisation with hydrogen resulting in a reduction of at least 85 % of the sulphur content of the products processed (ASTM D 1266-59 T method);

(k)in respect of products falling within heading 2710 only, deparaffining by a process other than filtering;

(l)in respect of heavy oils falling within heading ex2710 only, treatment with hydrogen at a pressure of more than 20 bar and a temperature of more than 250 °C with the use of a catalyst, other than to effect desulphurisation, when the hydrogen constitutes an active element in a chemical reaction. Further treatment with hydrogen of lubricating oils falling within heading ex2710 (e.g. hydrofinishing or decolourisation) in order, more especially, to improve colour or stability shall not, however, be deemed to be a specific process;

(m)in respect of fuel oils falling within heading ex2710 only, atmospheric distillation, on condition that less than 30 % of these products distils, by volume, including losses, at 300 °C by the ASTM D 86 method;

(n)in respect of heavy oils other than gas oils and fuel oils falling within heading ex2710 only, treatment by means of a high-frequency electrical brush-discharge.

3.For the purposes of headings ex2707, 2713 to 2715, ex2901, ex2902 and ex3403, simple operations such as cleaning, decanting, desalting, water separation, filtering, colouring, marking, obtaining a sulphur content as a result of mixing products with different sulphur contents, any combination of these operations or like operations do not confer origin.

Annex II

Derogations from the list of working or processing to be carried out on non-originating materials in order for the product manufactured to acquire originating status

1.For the products listed in the table below, the following rules may also apply instead of the rules set out in Annex II to this Protocol.

2.A proof of origin issued or made out pursuant to this Annex shall bear the following entry in French:‘Dérogation - Annexe II-A du protocole n^o 1… - Matières de la position SH n^o … originaires de … utilisées.’.This entry shall be recorded in box 7 of the movement certificates EUR.1 referred to in Article 18 of this Protocol, or shall be added to the origin declaration referred to in Article 21 thereof.

3.Côte d'Ivoire and the Member States of the European Union shall each take the steps necessary to implement this Annex.

The products mentioned in the list may not all be covered by the Agreement. It is, therefore, necessary to consult the other parts of the Agreement.

Common provisions

HS heading	Product description	Special derogation concerning working or processing carried out on non-originating materials that confers originating status
Chapter 2	Meat and edible meat offal	All meat and edible offal must be wholly obtained
Chapter 4	Dairy produce; birds' eggs, natural honey, edible products of animal origin, not elsewhere specified or included	Manufacture in which:all the materials of Chapter 4 used are wholly obtainedthe content of materials of Chapter 17 used does not exceed 40 % of the weight of the final product
Chapter 6	Live trees and other plants; bulbs, roots and the like; cut flowers and ornamental foliage	Manufacture in which all the materials of Chapter 6 used are wholly obtainedorManufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the products
0812 - 0814	Fruit and nuts, provisionally preserved; fruit, dried, other than that of headings 0801 to 0806; Peel of citrus fruits or melons	Manufacture in which the content of materials of Chapter 8 used does not exceed 30 % of the weight of the final product
Chapter 9	Coffee, tea, maté and spices	Manufacture from materials of any heading
1101 - 1104	Grain mill products	Manufacture from materials of Chapter 10, except rice of heading 1006
1105 - 1109	Flour, meal, powder, flakes of potatoes, etc.; starches; inulin; wheat gluten	Manufacture in which the content of non-originating materials does not exceed 20 % by weightorManufacture from materials of Chapter 10, except materials of heading 1006, in which the materials of heading 0710 and of subheading 071010 used are wholly obtained
Chapter 12	Oil seeds and oleaginous fruits; miscellaneous grains, seeds and fruit; industrial or medicinal plants; straw and fodder	Manufacture from materials of any heading except that of the product
1301	Lac; natural gums, resins, gum-resins and oleoresins (for example, balsams)	Manufacture from materials of any heading
1302	Vegetable saps and extracts; pectic substances, pectinates and pectates; agar-agar and other mucilages and thickeners, whether or not modified, derived from vegetable products:Mucilages and thickeners, modified, derived from vegetable products	Manufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the products
1506	Other animal fats and oils and their fractions, whether or not refined, but not chemically modified	Manufacture from materials of any heading except that of the product
ex1507 to 1515	Vegetable oils and their fractions:Soya-bean, ground-nut, palm, coconut (copra), palm kernel, babassu, tung and oiticica oil, myrtle wax and Japan wax, fractions of jojoba oil and oils for technical or industrial uses other than the manufacture of foodstuffs for human consumption, except olive oils of headings 1509 and 1510	Manufacture from materials of any subheading except that of the product
1516	Animal or vegetable fats and oils and their fractions, partly or wholly hydrogenated, inter-esterified, re-esterified or elaidinised, whether or not refined, but not further prepared	Manufacture from materials classified in a heading other than that of the product
Chapter 18	Cocoa and cocoa preparations	Manufacture:from materials of any heading except that of the productin which the content of materials of Chapter 17 used does not exceed 40 % of the weight of the final product
1901	Food preparations of flour, groats, meal, starch or malt extract, not containing cocoa in more than 40 % by weight calculated on a totally defatted basis, not elsewhere specified or included; food preparations of goods of heading 0401 to 0404, containing less than 5 % by weight of cocoa calculated on a totally defatted basis, not elsewhere specified or included	Manufacture:from materials of any heading except that of the productin which the content of materials of Chapter 17 used does not exceed 40 % of the weight of the final product
1902	Pasta, whether or not cooked or stuffed (with meat or other substances) or otherwise prepared, such as spaghetti, macaroni, noodles, lasagne, gnocchi, ravioli, cannelloni; couscous, whether or not prepared	Manufacture in which:the content of materials of Chapter 11 used does not exceed 20 % of the weight of the final productthe weight of the materials of Chapters 2 and 3 used does not exceed 20 % of the weight of the final product;
1903	Tapioca and substitutes therefor prepared from starch, in the form of flakes, grains, pearls, siftings or in similar forms:with a content of materials of subheading 110813 (potato starch) not more than 30 % by weight	Manufacture from materials of any heading except that of the product
1904	Prepared foods obtained by the swelling or roasting of cereals or cereal products (for example, corn flakes); cereals (other than maize (corn)) in grain form or in the form of flakes or other worked grains (except flour and meal), pre-cooked or otherwise prepared, not elsewhere specified or included	Manufacture:from materials of any heading, except those of heading 1806in which the content of materials of Chapter 11 used does not exceed 20 % by weightin which the content of materials of Chapter 17 used does not exceed 40 % of the weight of the final product
1905	Bread, pastry, cakes, biscuits and other bakers' wares, whether or not containing cocoa; communion wafers, empty cachets of a kind suitable for pharmaceutical use, sealing wafers, rice paper and similar products	Manufacture in which the content of materials of Chapter 11 used does not exceed 20 % by weight
ex Chapter 20	Preparations of vegetables, fruit, nuts or other parts of plants:from materials other than of headings 2002 and 2003	Manufacture:from materials of any heading except that of the productin which the content of materials of Chapter 17 used does not exceed 40 % of the weight of the final productorManufacture:in which the value of all the materials used does not exceed 70 % of the ex-works price of the productin which the content of materials of Chapter 17 used does not exceed 40 % of the weight of the final product
Chapter 21	Miscellaneous edible preparations	Manufacture:from materials of any heading except that of the productin which the content of materials of Chapters 4 and 17 used does not exceed 40 % of the weight of the final productorManufacture:in which the value of all the materials used does not exceed 70 % of the ex-works price of the productin which the content of materials of Chapters 4 and 17 used does not exceed 40 % of the weight of the final product
Chapter 23	Residues and waste from the food industries; prepared animal fodder	Manufacture:from materials of any heading except that of the productin which the maize (corn) content or the content of materials of Chapters 2, 4 and 17 used does not exceed 40 % of the weight of the final productorManufacture:in which the value of all the materials used does not exceed 70 % of the ex-works price of the productin which the maize (corn) content or the content of materials of Chapters 2, 4 and 17 used does not exceed 40 % of the weight of the final product
Chapter 32	Tanning or dyeing extracts; tannins and their derivatives; dyes, pigments and other colouring matter; paints and varnishes; putty and other mastics; inks	Manufacture in which all the materials used are classified in a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex-works price of the productorManufacture in which the value of all the materials used does not exceed 60 % of the ex-works price of the product
Chapter 33	Essential oils and resinoids; perfumery, cosmetic or toilet preparations	Manufacture in which all the materials used are classified in a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex-works price of the productorManufacture in which the value of all the materials used does not exceed 60 % of the ex-works price of the product
ex Chapter 34	Soap, organic surface-active agents, washing preparations, lubricating preparations, artificial waxes, prepared waxes, polishing or scouring preparations, candles and similar articles, modelling pastes, ‘dental waxes’ and dental preparations with a basis of plaster; except:	Manufacture in which all the materials used are classified in a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex-works price of the productorManufacture in which the value of all the materials used does not exceed 70 % of the ex-works price of the product
ex3404	Artificial waxes and prepared waxes:with a basis of paraffin, petroleum waxes, waxes obtained from bituminous minerals, slack wax or scale wax	Manufacture from materials of any heading
Chapter 35	Albuminoidal substances; modified starches; glues; enzymes	Manufacture in which the value of all the materials used does not exceed 60 % of the ex-works price of the product
Chapter 36	Explosives; pyrotechnic products; matches; pyrophoric alloys; certain combustible preparations	Manufacture in which the value of all the materials used does not exceed 60 % of the ex-works price of the product
Chapter 37	Photographic or cinematographic goods	Manufacture in which the value of all the materials used does not exceed 60 % of the ex-works price of the product
Chapter 38	Miscellaneous chemical products	Manufacture in which all the materials used are classified in a heading other than that of the product. However, materials classified within the same heading may be used provided their value does not exceed 20 % of the ex-works price of the productorManufacture in which the value of all the materials used does not exceed 60 % of the ex-works price of the product
ex3922 to 3926	Articles of plastics	Manufacture in which all the materials used are classified in a heading other than that of the product.
ex Chapter 41	Raw hides and skins (other than furskins) and leather	Manufacture in which all the materials used are classified in a heading other than that of the productorManufacture in which the value of all the materials used does not exceed 60 % of the ex-works price of the product
4101 - 4103	Raw hides and skins of bovine (including buffalo) or equine animals (fresh, or salted, dried, limed, pickled or otherwise preserved, but not tanned, parchment dressed or further prepared), whether or not dehaired or split; raw skins of sheep or lambs (fresh, or salted, dried, limed, pickled or otherwise preserved, but not tanned, parchment dressed or further prepared), whether or not with wool on or split, other than those excluded by Note 1(c) to Chapter 41; other raw hides and skins (fresh, or salted, dried, limed, pickled or otherwise preserved, but not tanned, parchment dressed or further prepared), whether or not dehaired or split, other than those excluded by Notes 1(b) or 1(c) to Chapter 41	Manufacture from materials of any heading
4104 - 4106	Tanned or crust hides and skins, without wool or hair on, whether or not split, but not further prepared	Retanning of pre-tanned leather
Chapter 42	Articles of leather; saddlery and harness; travel goods, handbags and similar containers; articles of animal gut (other than silk worm gut)	Manufacture in which all the materials used are classified in a heading other than that of the productorManufacture in which the value of all the materials used does not exceed 60 % of the ex-works price of the product
Chapter 46	Manufactures of straw, of esparto or of other plaiting materials; basketware and wickerwork	Manufacture in which all the materials used are classified in a heading other than that of the productorManufacture in which the value of all the materials used does not exceed 60 % of the ex-works price of the product
Chapter 48	Paper and paperboard; articles of paper pulp, of paper or of paperboard	Manufacture in which all the materials used are classified in a heading other than that of the productorManufacture in which the value of all the materials used does not exceed 60 % of the ex-works price of the product
ex6117	Other made-up clothing accessories; knitted or crocheted parts of garments or of clothing accessories	Spinning of natural and/or man-made staple fibres, or extrusion of man-made filament yarn, accompanied by knitting (knitted to shape products)orDyeing of yarn of natural fibres accompanied by knitting (knitted to shape products)
6213 and 6214	Handkerchiefs, shawls, scarves, mufflers, mantillas, veils and the like:embroideredother	Weaving accompanied by making-up (including cutting)orManufacture from unembroidered fabric, provided that the value of the unembroidered fabric used does not exceed 40 % of the ex-works price of the product^noteorMaking-up preceded by printing accompanied by at least two preparatory or finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling), provided that the value of the unprinted fabric used does not exceed 47.5 % of the ex-works price of the productWeaving accompanied by making-up (including cutting)orMaking-up preceded by printing accompanied by at least two preparatory finishing operations (such as scouring, bleaching, mercerising, heat setting, raising, calendering, shrink resistance processing, permanent finishing, decatising, impregnating, mending and burling), provided that the value of the unprinted fabric used does not exceed 47.5 % of the ex-works price of the product
6307	Other made-up articles, including dress patterns	Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
6308	Sets consisting of woven fabric and yarn, whether or not with accessories, for making up into rugs, tapestries, embroidered table cloths or serviettes, or similar textile articles, put up in packings for retail sale	Each item of the set must satisfy the rule which would apply to it if it were not included in the set. However, the value of the non-originating articles must not exceed 35 % of the ex-works price of the set
ex Chapter 64	Footwear, gaiters and the like	Manufacture from materials of any heading, except from assemblies of uppers affixed to inner soles or to other sole components
Chapter 69	Ceramic products	Manufacture in which all the materials used are classified in a heading other than that of the productorManufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
ex Chapter 71	Natural or cultured pearls, precious or semi-precious stones, precious metals, metals clad with precious metal, and articles thereof; imitation jewellery; coin, except for:	Manufacture in which all the materials used are classified in a heading other than that of the productorManufacture in which the value of all the materials used does not exceed 60 % of the ex-works price of the product
7106, 7108 and 7110	Precious metals:unwroughtsemi-manufactured or in powder form	Manufacture from materials of any heading, except those of headings 7106, 7108 and 7110orElectrolytic, thermal or chemical separation of precious metals of heading 7106, 7108 or 7110orFusion and/or alloying of precious metals of heading 7106, 7108 or 7110 with each other or with base metals Manufacture from unwrought precious metals
7115	Other articles of precious metal or of metal clad with precious metal	Manufacture from materials of any heading except that of the product
Chapter 83	Miscellaneous articles of base metal	Manufacture in which all the materials used are classified in a heading other than that of the productorManufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
ex8302	Other mountings, fittings and similar articles suitable for buildings, and automatic door closers	Manufacture in which all the materials used are classified in a heading other than that of the product. However, the other materials of heading 8302 may be used provided their value does not exceed 30 % of the ex-works price of the product
ex8306	Statuettes and other ornaments, of base metal	Manufacture in which all the materials used are classified in a heading other than that of the product. However, the other materials of heading 8306 may be used provided their value does not exceed 40 % of the ex-works price of the product
Chapter 84	Nuclear reactors, boilers, machinery and mechanical appliances; parts thereof	Manufacture in which all the materials used are classified in a heading other than that of the productorManufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
Chapter 85	Electrical machinery and equipment and parts thereof; sound recorders and reproducers, television image and sound recorders and reproducers, and parts and accessories of such articles	Manufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
Chapter 87	Vehicles other than railway or tramway rolling stock, and parts and accessories thereof	Manufacture in which all the materials used are classified in a heading other than that of the productorManufacture in which the value of all the materials used does not exceed 50 % of the ex-works price of the product
Chapter 94	Furniture; bedding, mattresses, mattress supports, cushions and similar stuffed furnishings; lamps and lighting fittings, not elsewhere specified or included; illuminated signs, illuminated name-plates and the like; prefabricated buildings	Manufacture in which all the materials used are classified in a heading other than that of the productorManufacture in which the value of all the materials used does not exceed 60 % of the ex-works price of the product

III

Form for movement certificate eur.1

1.Movement certificates EUR.1 shall be made out on the basis of the form of which a specimen appears in this Annex. This form shall be printed in one or more of the languages in which the Agreement is drawn up. Certificates shall be made out in one of these languages and in accordance with the provisions of the domestic law of the exporting State. If they are handwritten, they shall be completed in ink in printed characters.

2.Each certificate shall measure 210 × 297 mm; a tolerance of up to plus 8 mm or minus 5 mm in the length may be allowed. The paper used must be white, sized for writing, not containing mechanical pulp and weighing not less than 60 g/m². It shall have a printed green guilloche pattern background making any falsification by mechanical or chemical means apparent to the eye.

3.The exporting States may reserve the right to print the certificates themselves or may have them printed by approved printers. In the latter case, each certificate must include a reference to such approval. Each certificate must bear the name and address of the printer or a mark by which the printer can be identified. It shall also bear a serial number, either printed or not, by which it can be identified.

Movement certificate

Application for a movement certificate

Declaration by the exporter

Annex IV

Origin declaration

Annex V

Supplier declaration for products not having preferential origin status

I, the undersigned, declare that the goods listed on this invoice …⁽¹⁾ were produced …⁽²⁾ and incorporate the following components or materials which do not originate in Côte d'Ivoire, in another ACP State having applied an EPA at least on a provisional basis, in an OCT or in the European Union for preferential trade:

…⁽³⁾…⁽⁴⁾

…⁽⁵⁾

……⁽⁶⁾

I undertake to make available to the customs authorities, if required, evidence in support of this declaration.

…⁽⁷⁾…⁽⁸⁾

…⁽⁹⁾

NoteThe abovementioned text, suitably completed in conformity with the footnotes below, constitutes a supplier's declaration. The footnotes do not have to be reproduced.(1)

—If only some of the goods listed on the invoice are concerned they should be clearly indicated or marked and this marking entered on the declaration as follows: ‘… listed on this invoice and marked … were produced …’.

—If a document other than an invoice or an annex to the invoice is used (see Article 28(5) of this Protocol), the name of the document concerned shall be mentioned instead of the word ‘invoice’.

(2)The European Union, a Member State of the European Union, Côte d'Ivoire, an OCT or another ACP State having applied a EPA at least on a provisional basis.(3)A description of the product is to be given in all cases. The description must be adequate and should be sufficiently detailed to allow the tariff classification of the goods concerned to be determined.(4)Customs values to be given only if required.(5)Country of origin to be given only if required. The origin to be given must be a preferential origin, all other origins to be given as ‘third country’.(6)‘and have undergone the following processing in [the European Union] [a Member State of the European Union] [Côte d'Ivoire] [an OCT] [another ACP State having applied an EPA at least on a provisional basis] …’,to be added with a description of the processing carried out if this information is required.(7)Place and date.(8)Name and function in company.(9)Signature.

Annex VI

Information certificate

1.The form of the information certificate given in this Annex shall be used; it shall be printed in one or more of the official languages in which the Agreement is drawn up and shall be in accordance with the provisions of the domestic law of the exporting State. Information certificates shall be completed in one of those languages; if they are handwritten, they shall be completed in ink in capital letters. They shall bear a serial number, whether or not printed, by which they can be identified.

2.The information certificate shall measure 210 × 297 mm, a tolerance of up to plus 8 mm or minus 5 mm in the length may be allowed. The paper must be white, sized for writing, not containing mechanical pulp and weighing not less than 65 g/m².

3.The national administrations may reserve the right to print the forms themselves or may have them printed by printers approved by them. In the latter case, each certificate must include a reference to such approval. The forms shall bear the name and address of the printer or a mark by which the printer can be identified.

VII

Form for application for a derogation

1.Commercial description of the finished product1.1Customs classification (HS heading)	2.Anticipated annual quantity of exports to the European Union (weight, number of pieces, metres or other unit)
3.Commercial description of third country materials Customs classification (HS heading)	4.Anticipated annual quantity of third country materials to be used
5.Value of third country materials	6.Ex-works value of finished product
7.Origin of third country materials	8.Reasons why the rule of origin for the finished product cannot be fulfilled
9.Commercial description of materials originating in the countries or territories referred to in Article 7 to be used	10.Anticipated annual quantity of materials originating in the countries or territories referred to in Article 7 to be used
11.Value of materials of the countries or territories referred to in Article 7 to be used	12.Working or processing carried out in the countries or territories referred to in Article 7 without obtaining origin
13.Duration requested for derogation from … to…	14.Detailed description of working or processing in Côte d'Ivoire
15.Capital structure of the firm(s) concerned	16.Amount of investments made/foreseen
17.Staff employed/expected	18.Value added by the working or processing in Côte d'Ivoire:18.1Labour:18.2Overheads:18.3Other:
19.Other possible sources of supply for materials	20.Possible developments to overcome the need for a derogation in the future
21.Remarks

NOTES

1.If the boxes in the form are not sufficient to contain all relevant information, additional pages may be attached to the form. In this case, ‘see annex’ must be indicated in the appropriate box.

2.If possible, samples or other illustrative material (pictures, designs, catalogues, etc.) of the final product and of the materials used should accompany the form.

3.A form shall be completed for each product covered by the request.Boxes 3, 4, 5, 7‘third country’ means any country which is not referred to in Article 7 of this Protocol.Box 12If third country materials have been worked or processed in the countries or territories referred to in Article 7 of this Protocol without obtaining origin, before being further processed in Côte d'Ivoire which is requesting the derogation, indicate the working or processing carried out in the countries or territories referred to in Article 7 of this Protocol.Box 13The dates to be indicated are the start and end dates for the period in which EUR.1 certificates may be issued under the derogation.Box 18Indicate either the percentage of value added in relation to the ex-works price of the product or the monetary amount of value added per unit of product.Box 19If alternative sources of materials exist, indicate here what they are and, if possible, the reasons relating to cost or other reasons why they are not used.Box 20Indicate possible investment or diversification of sources of supply which makes the derogation necessary for only a limited period of time.

VIII

Overseas countries and territories

1.Overseas countries and territories of the Kingdom of Denmark:

—Greenland.

2.Overseas countries and territories of the French Republic:

—New Caledonia and Dependencies,

—French Polynesia,

—Saint Pierre and Miquelon,

—Saint Barthélemy,

—French Southern and Antarctic Territories,

—Wallis and Futuna Islands.

3.Overseas countries and territories of the Kingdom of the Netherlands:

—Aruba,

—Bonaire,

—Curacao,

—Saba,

—Sint Eustatius,

—Sint Maarten.

4.Overseas countries and territories of the United Kingdom of Great Britain and Northern Ireland:

—Anguilla,

—British Indian Ocean Territory,

—Turks and Caicos Islands,

—British Virgin Islands.

—Bermuda,

—Cayman Islands,

—Falkland Islands,

—South Georgia and South Sandwich Islands,

—Montserrat,

—Pitcairn,

—Saint Helena and Dependencies,

—British Antarctic Territory,

Within the meaning of this Protocol ‘overseas countries and territories’ are the countries and territories referred to in Annex II to the Treaty on the Functioning of the European Union listed below:

(This list is without prejudice to the status of these countries and territories, or to future changes in their status.)

Annex IX

Products referred to in article 7(4) of the protocol

CN code	Description
1701	Cane or beet sugar and chemically pure sucrose, in solid form.
1702	Other sugars, including chemically pure lactose, maltose, glucose and fructose, in solid form; sugar syrups not containing added flavouring or colouring matter; artificial honey, whether or not mixed with natural honey; caramel.
17049099	Sugar confectionery (including white chocolate), not containing cocoa:other:other:other:other:other:
18061030	Chocolate and other food preparations containing cocoa:cocoa powder, containing added sugar or other sweetening matter:containing 65 % or more but less than 80 % by weight of sucrose (including invert sugar expressed as sucrose) or isoglucose expressed as sucrose
18061090	Chocolate and other food preparations containing cocoa:cocoa powder, containing added sugar or other sweetening matter:containing 80 % or more by weight of sucrose (including invert sugar expressed as sucrose) or isoglucose expressed as sucrose
18062095	Chocolate and other food preparations containing cocoa:other preparations in blocks, slabs or bars weighing more than 2 kg or in liquid, paste, powder, granular or other bulk form in containers or immediate packings, of a content exceeding 2 kg:other:other
19019099	Malt extract; food preparations of flour, groats, meal, starch or malt extract, not containing cocoa or containing less than 40 % by weight of cocoa calculated on a totally defatted basis, not elsewhere specified or included; food preparations of goods of headings 0401 to 0404, not containing cocoa or containing less than 5 % by weight of cocoa calculated on a totally defatted basis, not elsewhere specified or included:other:other:other
21011298	Extracts, essences and concentrates, of coffee, tea or maté and preparations with a basis of these products or with a basis of coffee, tea or maté; roasted chicory and other roasted coffee substitutes, and extracts, essences and concentrates thereof:extracts, essences and concentrates, of coffee, and preparations with a basis of these extracts, essences or concentrates or with a basis of coffee:preparations with a basis of these extracts, essences or concentrates or with a basis of coffee:other
21012098	Extracts, essences and concentrates, of coffee, tea or maté and preparations with a basis of these products or with a basis of coffee, tea or maté; roasted chicory and other roasted coffee substitutes, and extracts, essences and concentrates thereof:extracts, essences and concentrates, of tea or maté, and preparations with a basis of these extracts, essences or concentrates, or with a basis of tea or maté:preparations:other
21069059	Food preparations not elsewhere specified or included:otherflavoured or coloured sugar syrups:otherother
21069098	Food preparations not elsewhere specified or included:otherotherother
33021029	Mixtures of odoriferous substances and mixtures (including alcoholic solutions) with a basis of one or more of these substances, of a kind used as raw materials in industry; other preparations based on odoriferous substances, of a kind used for the manufacture of beverages:of a kind used in the food or drink industries:of a kind used in the drink industries:preparations containing all flavouring agents characterising a beverage:otherother

DRAFT — DECISION No … /2019 OF THE EPA COMMITTEE — established under the stepping stone Economic Partnership Agreement between Côte d'Ivoire, of the one part, and the European Community and its Member States, of the other part — of … — as regards the adoption of Protocol 1 concerning the definition of the concept of originating products and methods of administrative cooperation

THE EPA COMMITTEE,Having regard to the stepping stone Economic Partnership Agreement between Côte d'Ivoire, of the one part, and the European Community and its Member States, of the other part (‘the Agreement’), signed in Abidjan on 26 November 2008 and applied on a provisional basis since 3 September 2016, in particular Articles 14 and 82 thereof,Whereas:(1)The Agreement applies, on the one hand, to the territories in which the Treaty on the Functioning of the European Union is applicable and under the conditions laid down in that Treaty and, on the other hand, to the territory of Côte d'Ivoire.(2)In accordance with Article 14(2) of the Agreement, the parties are to establish a reciprocal common regime governing the rules of origin, based on the rules of origin set out in the Cotonou Agreement and providing for their simplification, in view of the Ivorian party's development objectives. This regime will be incorporated into the Agreement by decision of the EPA Committee.(3)The parties have agreed on Protocol 1 to the Agreement concerning the definition of the concept of ‘originating products’ and methods of administrative cooperation.(4)In accordance with Article 82 of the Agreement, the Protocol to this Agreement shall form an integral part of the Agreement,HAS ADOPTED THIS DECISION:

Article 1The text of Protocol 1 to the Agreement concerning the definition of the concept of ‘originating products’ and methods of administrative cooperation set out in the Annex to this Decision is hereby adopted.Article 2This Decision shall enter into force upon its signature.

Joint declaration

concerning the Principality of Andorra

1.Products originating in the Principality of Andorra falling within Chapters 25 to 97 of the Harmonised System shall be accepted by Côte d'Ivoire as originating in the European Union within the meaning of this Agreement.

2.Protocol 1 concerning the definition of the concept of ‘originating products’ and methods of administrative cooperation shall apply mutatis mutandis for the purpose of defining the originating status of the above-mentioned products.

Joint declaration

concerning the Republic of San Marino

1.Products originating in the Republic of San Marino shall be accepted by Côte d’Ivoire as originating in the European Union within the meaning of this Agreement.

Protocol 1 — concerning the definition of the concept of originating products and methods of administrative cooperation

CONTENTSTITLE IGENERAL PROVISIONSArticles1.DefinitionsTITLE IIDEFINITION OF THE CONCEPT OF ‘ORIGINATING PRODUCTS’Articles2.General requirements3.Wholly obtained products4.Sufficiently worked or processed products5.Insufficient working or processing operations6.Working or processing of materials imported into the European Union free of duty7.Cumulation of origin8.Cumulation with other countries benefiting from duty-free quota-free access to the market of the European Union9.Unit of qualification10.Accessories, spare parts and tools11.Sets12.Neutral elements13.Accounting segregationTITLE IIITERRITORIAL REQUIREMENTSArticles14.Principle of territoriality15.Non-alteration16.ExhibitionsTITLE IVPROOF OF ORIGINArticles17.General requirements18.Procedure for the issue of a movement certificate EUR.119.Movement certificates EUR.1 issued retrospectively20.Issue of a duplicate movement certificate EUR.121.Conditions for making out an origin declaration22.Approved exporter23.Validity of proof of origin24.Submission of proof of origin25.Importation by instalments26.Exemptions from proof of origin27.Information procedure for cumulation purposes28.Supporting documents29.Preservation of proof of origin and supporting documents30.Discrepancies and clerical errors31.Amounts expressed in euroTITLE VADMINISTRATIVE COOPERATIONArticles32.Administrative conditions for products to benefit from the Agreement33.Notification of customs authorities34.Other methods of administrative cooperation35.Verification of proof of origin36.Verification of suppliers' declarations37.Dispute settlement38.Penalties39.Free zones40.DerogationsTITLE VICEUTA AND MELILLAArticles41.Special conditions42.Specific conditionsTITLE VIIFINAL PROVISIONSArticles43.Revision and application of rules of origin44.Annexes45.Implementation of the Protocol46.Transitional provisions for goods in transit or storageANNEX TO PROTOCOL 1ANNEX I to Protocol 1:Introductory notes to the list in Annex II to the ProtocolANNEX II to Protocol 1:List of working or processing to be carried out on non-originating materials in order for the product manufactured to acquire originating statusANNEX II-A to Protocol 1:Derogations from the list of working or processing to be carried out on non-originating materials in order for the product manufactured to acquire originating statusANNEX III to Protocol 1:Form for movement certificate EUR.1ANNEX IV to Protocol 1:Origin declarationANNEX V-A to Protocol 1:Supplier declaration for products having preferential origin statusANNEX V-B to Protocol 1:Supplier declaration for products not having preferential origin statusANNEX VI to Protocol 1:Information certificateANNEX VII to Protocol 1:Form for application for a derogationANNEX VIII to Protocol 1:Overseas Countries and TerritoriesANNEX IX to Protocol 1:Products referred to in Article 7(4) of the ProtocolJOINT DECLARATIONconcerning the Principality of AndorraJOINT DECLARATIONconcerning the Republic of San Marino

Title I — general provisions

Article 1DefinitionsFor the purposes of this Protocol:

(a)‘manufacture’ means any kind of working or processing including assembly or specific operations;

(b)‘material’ means any ingredient, raw material, component or part, etc., used in the manufacture of the product;

(c)‘product’ means the product being manufactured, even if it is intended for later use in another manufacturing operation;

(d)‘goods’ means both materials and products;

(e)‘customs value’ means the value as determined in accordance with the Agreement on Implementation of Article VII of the General Agreement on Tariffs and Trade 1994 (WTO Agreement on customs valuation);

(f)‘ex-works price’ means the price paid for the product ex works to the manufacturer in the European Union or in Côte d'Ivoire in whose undertaking the last working or processing is carried out, provided the price includes the value of all the materials used, minus any internal taxes paid which are, or may be, repaid when the product obtained is exported;

(g)‘value of materials’ means the customs value at the time of importation of the non-originating materials used, or, if this is not known and cannot be ascertained, the first ascertainable price paid for the materials in the European Union or in Côte d'Ivoire;

(h)‘value of originating materials’ means the value of such materials as defined in (g) applied mutatis mutandis;

(i)‘value added’ means the ex-works price of the products minus the customs value of materials imported from third countries into the European Union, the African States, the Carribean and the Pacific (hereafter called the ‘ACP countries’) having applied an Economic Partnership Agreement (EPA) at least on a provisional basis, or OCTs; if the customs value is not known or cannot be ascertained, account shall be taken of the first ascertainable price paid for the materials in the European Union or in Côte d'Ivoire;

(j)‘chapters’ and ‘headings’ mean the chapters and the four-digit headings used in the nomenclature which makes up the Harmonised Commodity Description and Coding System (‘Harmonised System’ or ‘HS’);

(k)‘classified’ refers to the classification of a product or material under a particular heading;

(l)‘consignment’ means products which are either sent simultaneously from one exporter to one consignee or covered by a single transport document covering their shipment from the exporter to the consignee or, in the absence of such a document, by a single invoice;

(m)‘territories’ includes territorial waters;

(n)‘OCT’ means the Overseas Countries and Territories as defined in Annex VIII to this Protocol;

(o)‘Committee’ means the Special Committee on Customs and Trade Facilitation referred to in Article 34 of the stepping stone Economic Partnership Agreement between Côte d'Ivoire, of the one part, and the European Community and its Member States, of the other part, unless otherwise provided for.

Title II — definition of the concept of originating products

Article 2General requirements1.For the purposes of the Agreement, the following products shall be considered as originating in the European Union:

(a)products wholly obtained in the European Union within the meaning of Article 3 of this Protocol;

(a)products wholly obtained in Côte d'Ivoire within the meaning of Article 3 of this Protocol;

(b)products obtained in the European Union incorporating materials which have not been wholly obtained there, provided that such materials have undergone sufficient working or processing in the European Union within the meaning of Article 4 of this Protocol.

(b)products obtained in Côte d'Ivoire incorporating materials which have not been wholly obtained there, provided that such materials have undergone sufficient working or processing in Côte d'Ivoire within the meaning of Article 4 of this Protocol.

2.For the purposes of this Agreement, the following products shall be considered as originating in Côte d'Ivoire:

Article 3Wholly obtained products1.The following shall be considered as wholly obtained in Côte d'Ivoire or in the European Union:

(a)live animals born and raised there;

(a)which are registered or recorded in a Member State of the European Union or in Côte d'Ivoire; and

(b)mineral products extracted from their soil or from their seabed;

(b)which sail under the flag of a Member State of the European Union or of Côte d'Ivoire; and

(c)vegetable products harvested there;

(c)which meet one of the following conditions:

(i)they are at least 50 % owned by nationals of a Member States of the European Union and/or of Côte d'Ivoire; or

(ii)they are owned by companies which:

—have their head office and their main place of business in one of the Member States of the European Union or in Côte d'Ivoire, and

—are at least 50 % owned by one or more Member States of the European Union and/or by Côte d'Ivoire, or by public entities or nationals of one or more of those States.

(d)products from live animals raised there;

(e)

(i)products obtained by hunting or fishing conducted there;

(ii)products of aquaculture, including mariculture, where the animals are raised from eggs, spawn, larvae or fry;

(f)products of sea fishing and other products taken from the sea outside the territorial waters of the European Union or of Côte d'Ivoire by their vessels;

(g)products made aboard their factory ships exclusively from the products referred to in point (f);

(h)used articles fit only for the recovery of raw materials;

(i)waste and scrap resulting from manufacturing operations conducted there;

(j)products extracted from marine soil or subsoil outside their territorial waters provided that they have sole rights to work that soil or subsoil;

(k)goods produced there exclusively from the products specified in (a) to (j).

2.The terms ‘their vessels’ and ‘their factory ships’ in points (f) and (g) of paragraph 1 shall apply only to vessels and factory ships:3.Notwithstanding paragraph 2 of this Article, further to a request from Côte d'Ivoire, vessels chartered or leased by Côte d'Ivoire to undertake fisheries activities in its exclusive economic zone shall be treated as ‘its vessel’ or ‘its vessels’, provided that an offer was made to the economic operators of the European Union in advance and that the implementing rules laid down in advance by the Committee are complied with. The Committee shall ensure that the conditions laid down in this paragraph are complied with.4.The conditions referred to in paragraph 2 of this Article may be fulfilled in Côte d'Ivoire and in States belonging to different Economic Partnership Agreements with which cumulation is applicable. In such cases, the products shall be deemed to have the origin of the flag State.

Article 4Sufficiently worked or processed products1.For the purposes of Article 2 of this Protocol, products which are not wholly obtained shall be considered to be sufficiently worked or processed when the conditions set out in the list in Annex II to this Protocol are fulfilled.2.For the purposes of Article 2 of this Protocol, and notwithstanding paragraph 1 of this Article, the products listed in Annex II-A to this Protocol may be considered to be sufficiently worked or processed when the conditions set out in that Annex are fulfilled. Without prejudice to the provisions of Article 43(2) of this Protocol, Annex II-A to this Protocol shall apply only to exports from Côte d'Ivoire, for a period of five (5) years from the date of entry into force of this Protocol.3.The conditions referred to in paragraphs 1 and 2 of this Article indicate, for all products covered by the Agreement, the working or processing which must be carried out on non-originating materials used in the manufacturing of these products and apply only to such materials. Accordingly, if a product which has acquired originating status by fulfilling the conditions set out in one of the lists for that product is used in the manufacture of another product, the conditions applicable to the product in which it is incorporated shall not apply to it, and no account shall be taken of the non-originating materials which may have been used in its manufacture.4.By way of derogation from paragraphs 1 and 2 of this Article, non-originating materials which, in accordance with the conditions set out in Annex II and Annex II-A to this Protocol for a given product, should not be used in the manufacture of that product, may nevertheless be used, provided that:

(a)their total value does not exceed 10 % of the ex-works price of the product for products of the European Union, and 15 % of the ex-works price of the product for products of Côte d'Ivoire;

(b)none of the percentages given in the list for the maximum value of non-originating materials are exceeded by virtue of the application of this paragraph.

5.Paragraph 4 of this Article shall not apply to products of Chapters 50 to 63 of the Harmonised System.6.Paragraphs 1 to 5 of this Article shall apply subject to Article 5 of this Protocol.

Article 5Insufficient working or processing operations1.The following operations shall be considered as insufficient working or processing to confer the status of originating products, whether or not the requirements of Article 4 of this Protocol are satisfied:

(a)preserving operations to ensure that the products remain in good condition during transport and storage;

(b)simple operations consisting of the removal of dust, sifting or screening, sorting, classifying, matching (including the making-up of sets of articles), washing, cleaning, painting, polishing, cutting up;

(c)removal of oxide, oil, paint or other coverings;

(d)in regulation 8(1)(e) for “21” substitute “ 18 ”.

(i)changes of packaging and breaking up and assembly of packages;

(ii)simple placing in bottles, flasks, cans, bags, cases, boxes, fixing on cards or boards, etc., and all other simple packaging operations;

(e)affixing marks, labels, logos and other like distinguishing signs on products or their packaging;

(f)simple mixing of products, whether or not of different kinds; mixing of sugar with any material;

(g)simple assembly of parts to constitute a complete product;

(h)simple disassembly of products into parts;

(i)ironing or pressing of textiles;

(j)husking, partial or total bleaching, polishing and glazing of cereals and rice;

(k)operations to colour or flavour sugar or form sugar lumps; partial or total milling of granulated sugar;

(l)peeling, stoning and shelling of fruits, nuts and vegetables;

(m)sharpening, simple grinding or simple cutting;

(n)a combination of two or more operations specified in points (a) to (m);

(o)slaughter of animals.

2.All operations carried out either in the European Union or in Côte d'Ivoire on a given product shall be considered together when determining whether the working or processing undergone by that product is to be regarded as insufficient within the meaning of paragraph 1 of this Article.

Article 6Working or processing of materials imported into the European Union free of duty1.Without prejudice to Article 2 of this Protocol, non-originating materials which can be imported into the European Union free of customs duties in application of the conventional tariffs of the most-favoured nation (MFN) system, in accordance with its Common Customs Tariff as defined in Annex I of Council Regulation (EEC) No 2658/87^note, shall be considered as materials originating in Côte d'Ivoire when incorporated into a product obtained there, provided that they have undergone working or processing there which goes beyond the operations referred to in Article 5(1) of this Protocol.2.Movement certificates EUR.1 (box 7) or origin declarations issued pursuant to paragraph 1 of this Article shall bear the following entry:

—‘Application de l'art. 6, para. 1, du protocole n^o 1 à l'APE Côte d'Ivoire-UE’,

3.The European Union shall, every year, notify the Committee of the list of materials to which the provisions of this Article apply. Once notification has been given, the list shall be published by the European Commission in the Official Journal of the European Union (C series), and by Côte d'Ivoire in accordance with its own procedures.4.The cumulation provided for in this Article shall not apply to materials which, on importation into the European Union, are subject to antidumping or countervailing duties when originating from a country which is subject to these antidumping or countervailing duties.

Article 7Cumulation of origin1.Without prejudice to Article 2 of this Protocol, materials originating in one of the parties, in other West African countries^note that benef from duty-free and quota-free access to the market of the European Union, in other ACP States which have applied an EPA at least on a provisional basis, or in OCTs shall be considered as materials originating in the other party when incorporated into a product obtained there, provided that working or processing they have undergone in that party goes beyond the operations referred to in Article 5(1) of this Protocol.Where the working or processing carried out in the party concerned does not go beyond the operations referred to in Article 5(1) of this Protocol, the product obtained shall be considered as originating in that party only if the value added there is greater than the value of the materials used originating in any one of the other countries or territories. If that is not the case, the product obtained shall be considered as originating in the country or territory which accounts for the highest value of originating materials used in the manufacture of the final product.The origin of the materials originating in other ACP States which have applied an EPA at least on a provisional basis and in OCTs shall be determined in accordance with the rules of origin applicable under the preferential agreements between the European Union and those countries and in accordance with Article 28 of this Protocol.2.Without prejudice to Article 2 of this Protocol, working and processing carried out in one of the parties, in other ACP States which have applied an EPA at least on a provisional basis or in OCTs shall be considered as having been carried out in the other party provided that the materials undergo subsequent working or processing going beyond the operations referred to in Article 5(1) of this Protocol.Where the working or processing carried out in one of the parties does not go beyond the operations referred to in Article 5(1) of this Protocol, the product obtained shall be considered as originating in that party only if the value added there is greater than the value of the materials used in any one of the said countries or territories. If that is not the case, the product obtained shall be considered as originating in the country or territory which accounts for the highest value of materials used in the manufacture of the final product.The origin of the finished product shall be determined in accordance with the rules of origin of this Protocol and the provisions of Article 28 of this Protocol.3.The cumulation provided for in paragraphs 1 and 2 of this Article may be applied in respect of the other countries of West Africa which have duty-free and quota-free access to the European Union market, of the other ACP States which have applied a EPA at least on a provisional basis and of the OCTs only if:

(a)the receiving party and all the countries or territories involved in the acquisition of the originating status have entered into an arrangement or agreement on administrative cooperation with each other which ensures the correct implementation of this Article and includes a reference to the use of appropriate proof of origin;

(a)materials of Harmonised System headings 1604 and 1605 originating in the EPA Pacific States pursuant to Article 6(6) of Protocol II to the Interim Partnership Agreement between the European Community, of the one part, and the Pacific States, of the other part^note;

(b)Côte d'Ivoire and the European Union provide each other, through the European Commission and the EPA National Commission, with the details of agreements on administrative cooperation with the other countries or territories referred to in this Article. The European Commission shall publish in the Official Journal of the European Union (C series), and Côte d'Ivoire shall publish in accordance with its own procedures, the date on which the cumulation provided for in this Article may be applied with those countries or territories listed in this Article which have fulfilled the necessary requirements.

(b)materials of Harmonised System headings 1604 and 1605 originating in the EPA Pacific States pursuant to any future provision of an EPA between the European Union and Pacific ACP States;

(c)materials originating in the Republic of South Africa which cannot be directly imported into the European Union duty free and quota free.

4.The cumulation provided for in this Article may only be applied after 1 October 2015 to the products listed in Annex IX of this Protocol, where the materials used in the manufacture of those products are originating or the working or processing takes place in another ACP State which has applied an EPA at least provisionally.5.The cumulation provided for in this Article shall not apply to:6.The European Union shall, every year, notify the Committee of the list of materials to which paragraph 5(c) of this Article applies. Once notification has been given, the list shall be published by the European Commission in the Official Journal of the European Union (C series), and by Côte d'Ivoire in accordance with its own procedures.

Article 8Cumulation with other countries benefiting from duty-free quota-free access to the market of the European Union1.Without prejudice to Article 2 of this Protocol, materials originating in countries and territories:

(a)benefiting from the ‘special arrangements for least developed countries’ under the EU scheme of generalised tariff preferences (‘the GSP’); or

(a)materials which, on importation into the European Union, are subject to antidumping or countervailing duties when originating in a country which is subject to these antidumping or countervailing duties;

(a)materials of Chapters 1 to 24 of the Harmonised System or listed in paragraph 1(ii) of Annex 1 to the WTO Agreement on Agriculture included in the GATT 1994;

(a)all the countries involved in the acquisition of the originating status have entered into an arrangement or agreement on administrative cooperation with each other which ensures the correct implementation of this Article and includes a reference to the use of appropriate proof of origin;

(b)benefiting from duty-free quota-free access to the market of the European Union under the general provisions of the GSP,

(b)materials of tariff subheadings 330210 and 350110 of the Harmonised System;

(b)materials which, on importation into the European Union, are subject to antidumping or countervailing duties when originating in a country which is subject to these antidumping or countervailing duties;

(b)Côte d'Ivoire provides the European Union, through the European Commission, with details of agreements on administrative cooperation with the other countries or territories referred to in this Article. The European Commission shall publish in the Official Journal of the European Union (C series) the date on which the cumulation provided for in this Article may be applied with those countries or territories listed in this Article which have fulfilled the necessary requirements.

(c)materials of tuna products classified in Chapter 3 of the Harmonised System and covered by the GSP of the European Union;

(c)materials which, pursuant to a free trade agreement between the European Union and a third country, are subject to trade measures and safeguard measures or any other measure denying such products duty-free quota-free access to the EU market.

(d)materials in respect of which tariff preferences are removed (graduation) or suspended (safeguard clause) under the GSP of the European Union.

—‘Application de l'art. 8, para. 1 ou 2, du protocole n^o1 à l'APE Côte d'Ivoire-UE’

shall be considered as materials originating in Côte d'Ivoire when incorporated into a product obtained there.It shall not be necessary for such materials to have undergone sufficient working or processing, provided they have undergone working or processing beyond that referred to in Article 5(1) of this Protocol. If it also contains non-originating materials, any product to which these materials are incorporated must undergo sufficient working or processing in accordance with Article 4 of this Protocol in order to be considered as originating in Côte d'Ivoire.1.2.The origin of the materials from the other countries or territories concerned shall be determined in accordance with the rules of origin applicable under the GSP of the European Union and in accordance with Article 27 of this Protocol.1.3.The cumulation provided for in this paragraph shall not apply to:2.Upon notification by Côte d'Ivoire, without prejudice to Article 2 of this Protocol and in accordance with paragraphs 2.1, 2.2 and 5 of this Article, materials originating in countries or territories benefiting from agreements or arrangements providing for duty-free quota-free access to the market of the European Union shall be considered as materials originating in Côte d'Ivoire. The notification shall be transmitted by Côte d'Ivoire to the European Union via the European Commission. Cumulation shall remain applicable until the conditions for granting it are fulfilled. It shall not be necessary for such materials to have undergone sufficient working or processing, provided they have undergone working or processing beyond that referred to in Article 5(1) of this Protocol.2.1.The origin of the materials of the other countries or territories concerned shall be determined in accordance with the rules of origin applicable under the EU's preferential agreements or arrangements with those countries and territories and in accordance with Article 28 of this Protocol.2.2.The cumulation provided for in this paragraph shall not apply to:3.The European Union shall notify the Committee each year of the list of materials and countries to which paragraph 1 of this Article applies. Once notification has been given, the list shall be published by the European Commission in the Official Journal of the European Union (C series), and by Côte d'Ivoire in accordance with its own procedures. Côte d'Ivoire shall notify the Committee each year of the materials to which the cumulation provided for in paragraphs 1 and 2 of this Article has been applied.4.Movement certificates EUR.1 (box 7) or origin declarations issued pursuant to paragraphs 1 and 2 of this Article shall bear the following entry:5.The cumulation provided for in paragraphs 1 and 2 of this Article may only be applied provided that:

Article 9Unit of qualification1.The unit of qualification for the application of this Protocol shall be the particular product which is considered as the basic unit when determining classification using the nomenclature of the Harmonised System.This means that:

(a)when a product composed of a group or assembly of articles is classified under the terms of the Harmonised System in a single heading, the whole shall constitute the unit of qualification;

(b)when a consignment consists of a number of identical products classified under the same heading of the Harmonised System, each product shall be taken individually when applying this Protocol.

2.Where, under General Rule 5 of the Harmonised System, packaging is included with the product for classification purposes, it must be included for the purposes of determining origin.

Article 10Accessories, spare parts and toolsAccessories, spare parts and tools dispatched with a piece of equipment, machine, apparatus or vehicle, which are part of the normal equipment and included in the price thereof or which are not separately invoiced, shall be regarded as forming a whole with the piece of equipment, machine, apparatus or vehicle in question.

Article 11SetsSets, as defined in General Rule 3 of the Harmonised System, shall be regarded as originating when all the component products are originating. Nevertheless, when a set is composed of originating and non-originating products, the set as a whole shall be regarded as originating, provided that the value of the non-originating products does not exceed 15 % of the ex-works price of the set.

Article 12Neutral elementsIn order to determine whether a product is originating, it shall not be necessary to determine the origin of the following which might be used in its manufacture:

(a)energy and fuel;

(b)plant and equipment;

(c)machines and tools;

(d)goods which do not enter and which are not intended to enter into the final composition of the product.

Article 13Accounting segregation1.Where considerable cost or material difficulties arise in keeping separate stocks of originating and non-originating fungible materials, the customs authorities may, on a written request from the interested parties, authorise the ‘accounting segregation’ method (the ‘method’) to be used for managing such stocks.2.The method shall also apply to raw sugar not containing added flavouring or colouring matter and intended for refining, originating and non-originating, of subheadings 170112, 170113 and 170114 of the Harmonised System, which is physically combined or mixed in Côte d'Ivoire or in the European Union prior to export to the European Union or to Côte d'Ivoire, respectively.3.The method shall ensure that, at any time, the number of products obtained which could be considered as originating in Côte d'Ivoire or in the EU is the same as that which would have been obtained had there been physical segregation of the stocks.4.The customs authorities may make the granting of the authorisation referred to in paragraphs 1 and 2 of this Article subject to any conditions deemed appropriate.5.The method shall be applied and its use shall be recorded on the basis of the general accounting principles applicable in the country where the product was manufactured.6.The beneficiary of the method may make out or apply for proof of origin, as the case may be, for the quantity of products which may be considered as originating. At the request of the customs authorities, the beneficiary shall provide a statement of how the quantities have been managed.7.The customs authorities shall monitor the use made of the authorisation and may withdraw it whenever the beneficiary makes improper use of the authorisation in any manner whatsoever or fails to fulfil any of the other conditions laid down in this Protocol.8.For the purposes of paragraphs 1 and 2 of this Article, ‘fungible materials’ or ‘fungible products’ mean materials or products that are of the same kind and commercial quality, with the same technical and physical characteristics, and which cannot be distinguished from one another for origin purposes.

Title III — territorial requirements

Article 14Principle of territoriality1.The conditions for acquiring originating status set out in Title II of this Protocol shall be fulfilled without interruption in Côte d'Ivoire or in the European Union, subject to Articles 6, 7 and 8 of this Protocol.2.Except as provided for in Articles 6, 7, and 8, where originating goods exported from Côte d'Ivoire or from the European Union to another country return, they must be considered as non-originating, unless it can be demonstrated to the satisfaction of the customs authorities that:

(a)the returning goods are the same goods as those exported; and

(a)those products are wholly obtained in the European Union or in Côte d'Ivoire or have undergone working or processing which goes beyond the operations referred to in Article 5 of this Protocol prior to being exported; and

(b)they have not undergone any operation beyond that necessary to preserve them in good condition while in that country or while being exported.

(b)it can be demonstrated to the satisfaction of the customs authorities that:

(i)any working or processing done outside the European Union or outside Côte d'Ivoire has been done under the outward processing arrangements, or similar arrangements;

(ii)the re-imported goods have been obtained by working or processing the exported materials; and

(iii)all costs arising outside Côte d'Ivoire or the European Union, including the value of the materials incorporated there, do not exceed 10 % of the ex-works price of the end product for which originating status is claimed.

3.The acquisition of originating status in accordance with the conditions set out in Title II of this Protocol shall not be affected by working or processing done outside the European Union or Côte d'Ivoire on products exported from the European Union or from Côte d'Ivoire and subsequently re-imported there, provided that:4.For goods meeting the conditions of paragraph 3 of this Article, all costs arising outside Côte d'Ivoire or the European Union, including the value of the materials incorporated there, shall be treated as non-originating materials. The originating status of the goods shall then be determined by applying the rules laid down in Annex II to this Protocol by combining the total value of the non-originating materials used both inside and outside the European Union or Côte d'Ivoire.5.Paragraphs 3 and 4 of this Article shall not apply to products which can be considered sufficiently worked or processed only if the general tolerance referred to in Article 4(4) of this Protocol is applied.6.Paragraphs 3 and 4 of this Article shall not apply to products of Chapters 50 to 63 of the Harmonised System.

Article 15Non-alteration1.Products declared for release for free circulation in one party shall be the same products as exported from the other party in which they are considered to originate. They shall not have been altered or transformed in any way or subjected to operations other than operations to preserve them in good condition or to add or affix marks, labels, seals or any other documentation to ensure compliance with the national requirements of the importing party, prior to being declared for release for free circulation.2.Storage of products or consignments may take place when they remain under customs supervision in the country or countries of transit.3.Without prejudice to Title V, consignments may be split when this is done by the exporter or under the exporter's responsibility, and the products remain under customs supervision in the country or countries of transit.4.Compliance with paragraphs 1 to 3 shall be assumed unless the customs authorities have reason to believe otherwise; in such cases, the customs authorities may ask the declarant to provide evidence of compliance with those paragraphs, which may be given by any means, including contractual transport documents such as bills of lading or factual evidence based on the marking or numbering of packages or any evidence related to the goods themselves.

Article 16Exhibitions1.Originating products sent for exhibition in a country or territory other than those referred to in Articles 6, 7 and 8 of this Protocol with which cumulation is applicable and sold after the exhibition for importation into the European Union or Côte d'Ivoire shall benefit on importation from the provisions of the Agreement, provided that it is shown to the satisfaction of the customs authorities that:

(a)an exporter has consigned these products from Côte d'Ivoire or from the European Union to the country in which the exhibition is held and has exhibited them there;

(b)the products have been sold or otherwise disposed of by that exporter to a person in Côte d'Ivoire or in the European Union;

(c)the products have been consigned during the exhibition or immediately thereafter in the state in which they were sent for exhibition; and

(d)the products have not, since they were consigned for exhibition, been used for any purpose other than demonstration at the exhibition.

2.A proof of origin shall be issued or made out in accordance with the provisions of Title IV of this Protocol and submitted to the customs authorities of the importing country in the normal manner. The name and address of the exhibition shall be indicated thereon. Where necessary, additional documentary evidence of the conditions under which they have been exhibited may be required.3.Paragraph 1 of this Article shall apply to any trade, industrial, agricultural or crafts exhibition, fair or similar public show or display which is not organised for private purposes in shops or business premises with a view to the sale of foreign products and during which the products remain under customs control.

Title IV — proof of origin

Article 17General requirements1.Products originating in the European Union shall, on importation into Côte d'Ivoire, benefit from the Agreement upon the submission of an origin declaration, in the cases specified in Article 21(1) of this Protocol, given by the exporter on an invoice, delivery note or any other commercial document which describes the products concerned in sufficient detail to enable them to be identified (an ‘origin declaration’). The text of the origin declaration appears in Annex IV.2.Products originating in Côte d'Ivoire shall, on importation into the European Union, benefit from the provisions of this Agreement upon submission of either:

(a)a movement certificate EUR.1, a specimen of which appears in Annex III to this Protocol;

(b)in the cases specified in Article 21(1) of this Protocol, an origin declaration, the text of which appears in Annex IV to this Protocol.

3.Point (a) of paragraph 2 shall apply for a period of three years from the entry into force of this Protocol. At the expiry of that period, only point (b) of paragraph 2 shall apply.4.By way of derogation from paragraphs 1 and 2 of this Article, originating products within the meaning of this Protocol shall, in the cases specified in Article 26, benefit from the Agreement without it being necessary to submit any of the documents referred to in paragraphs 1 or 2.5.For the purposes of applying the provisions of this Title, exporters shall endeavour to use a language shared by Côte d'Ivoire and the European Union.

Article 18Procedure for the issue of a movement certificate EUR.11.A movement certificate EUR.1 shall be issued by the customs authorities of the exporting country on application having been made in writing by the exporter or, under the exporter's responsibility, by the authorised representative of the exporter.2.For this purpose, the exporter or his authorised representative shall fill in both the movement certificate EUR.1 and the application form, specimens of which appear in Annex III to this Protocol. These forms shall be completed in accordance with the provisions of this Protocol. If they are handwritten, they shall be completed in ink in printed characters. The description of the products must be given in the box reserved for this purpose without leaving any blank lines. Where the box is not completely filled, a horizontal line must be drawn below the last line of the description, the empty space being crossed through.3.The exporter applying for the issue of a movement certificate EUR.1 shall be prepared to submit at any time, at the request of the customs authorities of the exporting country where the movement certificate EUR.1 is issued, all appropriate documents proving the originating status of the products concerned as well as compliance with the other requirements of this Protocol.4.A movement certificate EUR.1 shall be issued by the customs authorities of a Member State of the European Union or of Côte d'Ivoire if the products concerned can be considered as products originating in the European Union, in Côte d'Ivoire or in one of the other countries or territories referred to in Articles 6, 7 and 8 of this Protocol and fulfil the other requirements of this Protocol.5.The issuing customs authorities shall take any steps necessary to verify the originating status of the products and compliance with the other requirements of this Protocol. For this purpose, they shall have the right to call for any evidence and to carry out any inspection of the exporter's accounts or any other check considered appropriate. The issuing customs authorities shall also ensure that the forms referred to in paragraph 2 of this Article are duly completed. In particular, they shall check whether the space reserved for the description of the products has been completed in such a manner as to exclude all possibility of fraudulent additions.6.The date of issue of the movement certificate EUR.1 shall be indicated in box 11 of the certificate.7.A movement certificate EUR.1 shall be issued by the customs authorities and made available to the exporter as soon as actual exportation has been effected or ensured.

Article 19Movement certificates EUR.1 issued retrospectively1.Notwithstanding Article 18(7) of this Protocol, a movement certificate EUR.1 may exceptionally be issued after exportation of the products to which it relates if:

(a)it was not issued at the time of exportation because of errors or involuntary omissions or special circumstances; or

(b)it is demonstrated to the satisfaction of the customs authorities that a movement certificate EUR.1 was issued but was not accepted at importation for technical reasons.

2.For the implementation of paragraph 1 of this Article, the exporter must indicate in his application the place and date of exportation of the products to which the movement certificate EUR.1 relates, and state the reasons for his request.3.The customs authorities may issue a movement certificate EUR.1 retrospectively only after verifying that the information supplied in the exporter's application complies with that in the corresponding file.4.Movement certificates EUR.1 issued retrospectively shall be endorsed with the following entry:‘DÉLIVRÉ A POSTERIORI’.5.The endorsement referred to in paragraph 4 of this Article shall be inserted in the ‘Remarks’ box of the movement certificate EUR.1.

Article 20Issue of a duplicate movement certificate EUR.11.In the event of theft, loss or destruction of a movement certificate EUR.1, the exporter may apply to the customs authorities which issued it for a duplicate made out on the basis of the export documents in their possession.2.The duplicate issued in this way shall be endorsed with the following entry:‘DUPLICATA’3.The entry referred to in paragraph 2 of this Article shall be inserted in the ‘Remarks’ box of the duplicate movement certificate EUR.1.4.The duplicate, which must bear the date of issue of the original movement certificate EUR.1, shall take effect as from that date.

Article 21Conditions for making out an origin declaration1.An origin declaration may be made out:

(a)in the cases referred to in Article 17(1), by an exporter registered in accordance with the relevant provisions of EU law;

(b)in the cases referred to in point (b) of Article 17(2):

—within a period of three years from the entry into force of this Protocol, by an exporter within the meaning of Article 22;

—after the expiry of that period,, by an exporter registered in accordance with the relevant provisions of Ivorian law;

(c)by any exporter, for any consignment consisting of one or more packages containing originating products, the total value of which does not exceed EUR 6000.

2.An origin declaration may be made out if the products concerned can be considered as products originating in Côte d'Ivoire, in the European Union or in one of the other countries or territories referred to in Articles 6, 7 and 8 of this Protocol and fulfil the other requirements of this Protocol.3.The exporter making out an origin declaration shall be prepared to submit at any time, at the request of the customs authorities of the exporting country, all appropriate documents proving the originating status of the products concerned as well as compliance with the other requirements of this Protocol.4.An origin declaration shall be made out by the exporter by typing, stamping or printing on the invoice, the delivery note or another commercial document, the declaration, the text of which appears in Annex IV to this Protocol, using one of the linguistic versions set out in that Annex and in accordance with the provisions of the domestic law of the exporting country. If the declaration is handwritten, it shall be written in ink in printed characters.5.Origin declarations shall bear the original signature of the exporter in manuscript. However, a registered exporter as defined in paragraph 1 of this Article, or an approved exporter within the meaning of Article 22 of this Protocol shall not be required to sign such declarations provided that he gives the customs authorities of the exporting country a written undertaking that he accepts full responsibility for any origin declaration which identifies him as if it had been signed in manuscript by him.6.An origin declaration may be made out by the exporter when the products to which it relates are exported, or after exportation on condition that it is presented in the importing country no longer than two (2) years after the importation of the products to which it relates.

Article 22Approved exporter1.The customs authorities of the exporting country may authorise any exporter who makes frequent shipments of products under the trade cooperation provisions of the Agreement to make out origin declarations irrespective of the value of the products concerned. An exporter seeking such authorisation shall offer to the satisfaction of the customs authorities all guarantees necessary to verify the originating status of the products as well as compliance with the other requirements of this Protocol.2.The customs authorities may grant the status of approved exporter subject to any conditions which they consider appropriate.3.The customs authorities shall grant to the approved exporter a customs authorisation number which shall appear on the origin declaration.4.The customs authorities shall monitor the use of the authorisation by the approved exporter.5.The customs authorities may withdraw the authorisation at any time. They shall do so where the approved exporter no longer offers the guarantees referred to in paragraph 1, no longer fulfils the conditions referred to in paragraph 2 of this Article or otherwise makes incorrect use of the authorisation.

Article 23Validity of proof of origin1.Proof of origin shall be valid for ten (10) months from the date of issue in the exporting country and shall be submitted within that period to the customs authorities of the importing country.2.Proof of origin submitted to the customs authorities of the importing country after the final date for presentation specified in paragraph 1 of this Article may be accepted for the purpose of applying preferential treatment, where the failure to submit these documents by the final date set is due to exceptional circumstances.3.In other cases of belated presentation, the customs authorities of the importing country may accept the proof of origin where the products have been submitted before the final date.

Article 24Submission of proof of originProof of origin shall be submitted to the customs authorities of the importing country in accordance with the procedures applicable in that country. Those authorities may require proof of origin to be translated. They may also require that the import declaration be accompanied by a statement from the importer to the effect that the products meet the requisite conditions for implementation of the Agreement.

Article 25Importation by instalmentsWhere, at the request of the importer and on the conditions laid down by the customs authorities of the importing country, dismantled or non-assembled products within the meaning of General Rule 2(a) of the Harmonised System falling within Sections XVI and XVII or headings 7308 and 9406 of the Harmonised System are imported by instalments, a single proof of origin for such products shall be submitted to the customs authorities upon importation of the first instalment.

Article 26Exemptions from proof of origin1.Products sent as small packages from private persons to private persons or forming part of travellers' personal luggage shall be admitted as originating products without requiring the submission of proof of origin, provided that such products are not imported by way of trade and have been declared as meeting the requirements of this Protocol and where there is no doubt as to the veracity of such a declaration. In the case of products sent by post, that declaration can be made on customs declaration CN22/CN23 or on a sheet of paper annexed to that document.2.Imports which are occasional and consist solely of products for the personal use of the recipients or travellers or their families shall not be considered as imports by way of trade if it is evident from the nature and quantity of the products that no commercial purpose is in view.3.Furthermore, the total value of those products shall not exceed EUR 500 in the case of small packages or EUR 1200 in the case of products forming part of travellers' personal luggage.

Article 27Information procedure for cumulation purposes1.When Article 7(1) of this Protocol is applied, the evidence of originating status within the meaning of this Protocol of the materials from Côte d'Ivoire, from the European Union, from another ACP State having applied an EPA at least on a provisional basis or from an OCT shall be provided by a movement certificate EUR.1, an origin declaration or the supplier's declaration, a specimen of which appears in Annex V-A, given by the exporter in Côte d'Ivoire or in the European Union from which the materials came.2.When Article 7(1) of this Protocol is applied, the evidence of the working or processing carried out in Côte d'Ivoire, in the European Union, in another ACP State having applied an EPA at least on a provisional basis or in an OCT shall be given by the supplier's declaration, a specimen of which appears in Annex V-B to this Protocol, given by the exporter in Côte d'Ivoire or in the European Union from which the materials came.3.When Article 8(1) of this Protocol is applied, the supporting documents required to prove origin shall be determined in accordance with the rules applicable to GSP beneficiary countries^note.4.When Article 8(2) of this Protocol is applied, the supporting documents required to prove origin shall be determined in accordance with the rules laid down in the arrangements or agreements concerned.5.A separate supplier's declaration shall be made out by the supplier for each consignment of goods on the commercial invoice related to that consignment or in an annex to that invoice, or on a delivery note or any other commercial document related to that consignment which describes the materials concerned in sufficient detail to enable them to be identified.6.The supplier's declaration may be made out on a pre-printed form.7.The suppliers' declarations shall bear the original signature of the supplier in manuscript. However, where the invoice and the supplier's declaration are established using electronic data processing methods, the supplier's declaration need not be signed in manuscript provided the responsible official in the supplying company is identified to the satisfaction of the customs authorities in the State in which the supplier's declaration is drawn up. Those customs authorities may lay down conditions for the implementation of this paragraph.8.The supplier's declarations shall be submitted to the customs authorities in the exporting country that has been requested to issue the movement certificate EUR.1.9.The supplier making out a declaration must be prepared to submit at any time, at the request of the customs authorities of the country where the declaration is made out, all appropriate documents proving that the information given on this declaration is correct.10.Suppliers' declarations made and information certificates issued before the date of entry into force of this Protocol in accordance with Article 26 of Protocol 1 to the Cotonou Agreement shall remain valid.

Article 28Supporting documentsThe documents referred to in Articles 18(3) and 21(3) of this Protocol used for the purpose of proving that products covered by a movement certificate EUR.1 or an origin declaration can be considered as products originating in Côte d'Ivoire, in the European Union or in one of the other countries or territories referred to in Articles 6, 7 and 8 of this Protocol and fulfil the other requirements of this Protocol may consist inter alia of the following:

(a)direct evidence of the processes carried out by the exporter or supplier to obtain the goods concerned, contained for example in his accounts or internal bookkeeping;

(b)documents proving the originating status of materials used, issued or made out in Côte d'Ivoire, in the European Union or in one of the other countries or territories referred to in Articles 6, 7 and 8 of this Protocol where these documents are used in accordance with domestic law;

(c)documents proving the working or processing of materials in Côte d'Ivoire, in the European Union or in one of the other countries or territories referred to in Articles 6, 7 and 8 of this Protocol, issued or made out in Côte d'Ivoire, in the European Union or in one of the other countries or territories referred to in Articles 6, 7 and 8 where these documents are used in accordance with domestic law;

(d)movement certificates EUR.1 or origin declarations proving the originating status of materials used, issued or made out in Côte d'Ivoire, in the European Union or in one of the other countries or territories referred to in Articles 6, 7 and 8 of this Protocol, and in accordance with this Protocol.

Article 29Preservation of proof of origin and supporting documents1.The exporter applying for the issue of a movement certificate EUR.1 shall keep the documents referred to in Article 18(3) of this Protocol for at least three (3) years.2.Exporters making out an origin declaration shall keep a copy of that origin declaration as well as the documents referred to in Article 21(3) of this Protocol for at least three (3) years.3.Suppliers making out an origin declaration shall keep copies of the declaration and of the invoice, delivery notes or other commercial documents to which this declaration is annexed, as well as the documents referred to in Article 27(9) of this Protocol, for at least three (3) years.4.The customs authorities of the exporting country issuing a movement certificate EUR.1 shall keep the application form referred to in Article 18(2) of this Protocol for at least three (3) years.5.The customs authorities of the importing country shall keep the movement certificates EUR.1 and the origin declarations submitted to them for at least three (3) years.

Article 30Discrepancies and clerical errors1.The discovery of slight discrepancies between the entries made in the proof of origin and those made in the documents submitted to the customs office for the purpose of carrying out the formalities for importing the products shall not ipso facto render the proof of origin null and void if it is duly established that this document does correspond to the products submitted.2.Obvious clerical errors such as typing errors on a proof of origin should not cause this document to be rejected if these errors are not such as to create doubts concerning the accuracy of the entries made in this document.

Article 31Amounts expressed in euro1.For the application of Article 21(1)(c) and Article 26(3) of this Protocol in cases where products are invoiced in a currency other than euro, amounts in the national currencies of Côte d'Ivoire, of the Member States of the European Union or of the other countries or territories referred to in Articles 6, 7 and 8 of this Protocol equivalent to the amounts expressed in euro shall be fixed annually by each of the countries concerned.2.A consignment shall benefit from the provisions of Article 21(1)(c) or Article 26(3) of this Protocol by reference to the currency in which the invoice is drawn up, according to the amount fixed by the country concerned.3.The amounts to be used in any given national currency shall be the equivalent in that currency of the amounts expressed in euro as at the first working day of October. The amounts shall be communicated to the European Commission by 15 October at the latest and shall apply from 1 January the following year. The European Commission shall notify all countries concerned of the relevant amounts.4.A country may round up or down the amount resulting from the conversion into its national currency of an amount expressed in euro. The rounded-off amount may not differ from the amount resulting from the conversion by more than 5 %. A country may retain unchanged its national currency equivalent of an amount expressed in euro if, at the time of the annual adjustment provided for in paragraph 3 of this Article, the conversion of that amount, prior to any rounding-off, results in an increase of less than 15 % in the national currency equivalent. The national currency equivalent may be retained unchanged if the conversion would result in a decrease in that equivalent value.5.The amounts expressed in euro shall be reviewed by the Committee at the request of the European Union or of Côte d'Ivoire. When carrying out this review, the Committee shall consider the desirability of preserving the effects of the limits concerned in real terms. For this purpose, it may decide to modify the amounts expressed in euro.

Title V — administrative cooperation

Article 32Administrative conditions for products to benefit from the AgreementProducts originating, within the meaning of this Protocol, in Côte d'Ivoire or in the European Union shall benefit, at the time of the customs import declaration, from the preferences resulting from the Agreement only on condition that they were exported on or after the date on which the exporting country complies with Articles 33, 34 and 45 of this Protocol.The Contracting Parties shall convey the information referred to in Article 33 of this Protocol.

Article 33Notification of customs authorities1.Côte d'Ivoire and the Member States of the European shall provide each other, via the European Commission and the EPA National Commission, with the addresses of the customs authorities competent to issue and verify movement certificates EUR.1, origin declarations and supplier's declarations, and with specimens of the stamps used in the customs offices for the issue of those certificates.Movement certificates EUR.1 and origin declarations or supplier's declarations shall be accepted for the purpose of applying preferential treatment from the date the information is received by the European Commission and the EPA National Commission.2.Côte d'Ivoire and the Member States of the European Union shall immediately inform each other of any change in the information referred to in paragraph 1 of this Article.3.The authorities referred to in paragraph 1 of this Article shall act under the authority of the government of the country concerned. The authorities in charge of control and verification shall be part of the governmental authorities of the country concerned.

Article 34Other methods of administrative cooperation1.In order to ensure the proper application of this Protocol, the European Union, Côte d'Ivoire and the other countries referred to in Articles 6, 7 and 8 of this Protocol shall ensure, through their competent customs authorities, that the authenticity of the movement certificates EUR.1, the origin declarations or the supplier's declarations and the accuracy of the information given in these documents are checked. Côte d'Ivoire and the Member States of the European Union shall also:

(a)provide each other with the necessary administrative cooperation in the event of a request for the monitoring of the proper management and control of this Protocol in the country concerned, including on-site visits;

(b)check, in accordance with Article 35 of this Protocol, the originating status of the products and compliance with the other requirements of this Protocol.

2.The authorities consulted shall furnish the relevant information concerning the conditions under which the product has been made, indicating in particular the conditions under which the rules of origin have been complied with in Côte d'Ivoire, in the European Union and in the other countries referred to in Articles 6, 7 and 8 of this Protocol.

Article 35Verification of proof of origin1.Subsequent verifications of proof of origin shall be carried out on the basis of a risk analysis, by random sampling or whenever the customs authorities of the importing country have reasonable doubts as to the authenticity of such documents, the originating status of the products concerned or compliance with the other requirements of this Protocol.2.For the purposes of implementing paragraph 1 of this Article, the customs authorities of the importing country shall return the movement certificate EUR.1 and the invoice, if it has been submitted, the origin declaration, or a copy of these documents, to the customs authorities of the exporting country giving, where appropriate, the reasons for the request for verification. Any documents and information obtained suggesting that the information given on the proof of origin is incorrect shall be forwarded in support of the request for verification.3.The verification shall be carried out by the customs authorities of the exporting country. For that purpose, they shall have the right to call for any evidence and to carry out any inspection of the exporter's accounts or any other check considered appropriate.4.If the customs authorities of the importing country decide to suspend the granting of preferential treatment to the products concerned while awaiting the results of the verification, release of the products shall be offered to the importer subject to any precautionary measures deemed necessary.5.The customs authorities requesting the verification shall be informed of the results thereof as soon as possible. Those results must indicate clearly whether the documents are authentic and whether the products concerned can be considered as products originating in Côte d'Ivoire, in the European Union or in one of the other countries referred to in Articles 6, 7 and 8 of this Protocol and fulfil the other requirements of this Protocol.6.If in cases of reasonable doubt there is no reply within ten (10) months of the date of the verification request or if the reply does not contain sufficient information to determine the authenticity of the document in question or the real origin of the products, the requesting customs authorities shall, except in exceptional circumstances, refuse entitlement to the preferences.7.The parties shall refer to Article 7 of Protocol 2 to the Agreement on mutual administrative assistance in customs matters for joint investigations concerning proof of origin.

Article 36Verification of suppliers' declarations1.Verification of suppliers' declarations shall be carried out on the basis of risk analysis, by random sampling or whenever the customs authorities of the country where such declarations have been taken into account to issue a movement certificate EUR.1 or to make out an origin declaration have reasonable doubts as to the authenticity of the document or the accuracy of the information given in this document.2.The customs authorities to which a supplier's declaration is submitted may request the customs authorities of the State where the declaration was made out to issue an information certificate, a specimen of which appears in Annex VI to this Protocol. Alternatively, the certifying authorities to which a supplier's declaration is submitted may request that the exporter produce an information certificate issued by the customs authorities of the State where the declaration was made out.A copy of the information certificate shall be preserved by the office which has issued it for at least three (3) years.3.The customs authorities requesting the verification shall be informed of the results thereof as soon as possible. The results must indicate clearly whether the information given in the supplier's declaration is correct and make it possible for them to determine whether and to what extent this supplier's declaration could be taken into account for issuing a movement certificate EUR.1 or for making out an origin declaration.4.The verification shall be carried out by the customs authorities of the country where the supplier's declaration was made out. For this purpose, they shall have the right to call for any evidence or to carry out any inspection of the supplier's account or any other check which they consider appropriate in order to verify the accuracy of the supplier's declaration.5.Any movement certificate EUR.1 or origin declaration issued or made out on the basis of an inaccurate supplier's declaration shall be considered null and void.

Article 37Dispute settlement1.Where disputes arise in relation to the verification procedures of Articles 35 and 36 of this Protocol which cannot be settled between the customs authorities requesting a verification and the customs authorities responsible for carrying out this verification or where they raise a question of interpretation of this Protocol, they shall be submitted to the Committee.2.In all cases the settlement of disputes between the importer and the customs authorities of the importing country shall take place under the legislation of that country.

Article 38PenaltiesPenalties shall be imposed on any person who draws up, or causes to be drawn up, a document which contains inaccurate information for the purpose of obtaining preferential treatment for products.

Article 39Free zones1.Côte d'Ivoire and the European Union shall take all necessary steps to ensure that products traded under cover of a proof of origin or a supplier's declaration and which in the course of transport use a free zone situated in their territory, are not substituted by other goods and do not undergo handling other than normal operations designed to prevent their deterioration.2.By way of derogation from paragraph 1 of this Article, when products originating in Côte d'Ivoire or in the European Union are imported into a free zone under cover of a proof of origin and undergo treatment or processing, the authorities concerned shall issue a new movement certificate EUR.1 at the exporter's request if the treatment or processing undergone complies with the provisions of this Protocol.

Article 40Derogations1.Derogations from this Protocol may be adopted by the Committee where the development of existing industries or the creation of new industries in Côte d'Ivoire justifies them. To that end, Côte d'Ivoire shall, before or when it submits the matter to the Committee, notify the European Union of its request together with the reasons for the request in accordance with paragraph 2 of this Article. The European Union shall respond positively to all requests by Côte d'Ivoire which are duly justified in accordance with this Article and which cannot cause serious injury to an established EU industry.2.In order to facilitate the examination by the Committee of requests for derogation, Côte d'Ivoire shall, by means of the form set out in Annex VII to this Protocol, furnish in support of its request the fullest possible information covering in particular the points listed below:

(a)description of the finished product;

(a)the level of development or the geographical situation of Côte d'Ivoire;

(a)Derogations shall be valid for a period, generally of five (5) years, to be determined by the Committee.

(b)nature and quantity of materials originating in a third country;

(b)cases where the application of the existing rules of origin would significantly affect the ability of an existing industry in Côte d'Ivoire to continue exporting to the European Union, with particular reference to cases where this could lead to cessation of its activities;

(b)The derogation decision may provide for renewals without a new decision of the Committee being necessary, provided that Côte d'Ivoire submits, three (3) months before the end of each period, proof that it is still unable to meet the conditions of this Protocol which have been derogated from.If any objection is made to the extension, the Committee shall examine it as soon as possible and decide whether to extend the derogation. The Committee shall proceed as provided for in paragraph 7 of this Article. All necessary measures shall be taken to avoid interruptions in the application of the derogation.

(c)nature and quantity of materials originating in Côte d'Ivoire or in the States or territories referred to in Article 7 of this Protocol or the materials which have been processed there;

(c)specific cases where it can be clearly demonstrated that significant investment in an industry could be deterred by the rules of origin and where a derogation favouring the implementation of an investment programme would enable these rules to be complied with in stages.

(c)In the periods referred to in subparagraphs (a) and (b), the Committee may review the terms for implementing the derogation should a significant change be found to have taken place in the substantive factors governing the decision to grant the derogation. On conclusion of its review the Committee may decide to amend the terms of its decision as regards the scope of the derogation or any other condition previously laid down.

(d)manufacturing processes;

(e)value added;

(f)number of employees in the undertaking concerned;

(g)anticipated volume of exports to the European Union;

(h)other possible sources of supply for raw materials;

(i)reasons for the duration requested in the light of efforts made to find new sources of supply;

(j)other observations.

The same rules shall apply to any requests for extension.The Committee may modify the form.3.The examination of requests shall in particular take into account:4.In all cases, an examination shall be carried out to ascertain whether the rules relating to cumulation of origin do not provide a solution to the problem.5.In the examination of requests, special account shall be taken, on a case-by-case basis, of the possibility of conferring originating status on products which include in their composition materials originating in neighbouring developing countries, least-developed countries or developing countries with which Côte d'Ivoire has special relations, provided that administrative cooperation can be established.6.The Committee shall take all the necessary steps to ensure that a decision is reached as soon as possible and in any case not later than seventy five (75) working days after the request is received by the EU Co-Chair of the Committee. If the European Union does not inform Côte d'Ivoire of its position on the request within this period, the request shall be deemed to have been accepted.7.8.Notwithstanding paragraphs 1 to 7 of this Article, the automatic derogations for canned tuna and tuna loins of HS heading 1604 shall be granted only for a period of two (2) years from the date of entry into force of this Protocol, within the limits of an annual degressive quota of 2000 tonnes in the first year and 1000 in the second year for canned products and an annual quota of 200 tonnes for tuna loins.

Title VI — ceuta and melilla

Article 41Special conditions1.The term ‘European Union’ used in this Protocol shall not cover Ceuta and Melilla.2.Products originating in Côte d'Ivoire, when imported into Ceuta or Melilla, shall enjoy in all respects the same customs regime as that which is applied to products originating in the customs territory of the European Union under Protocol 2 of the Act of Accession of the Kingdom of Spain and the Portuguese Republic to the European Communities. Côte d'Ivoire shall grant to imports of products covered by this Agreement and originating in Ceuta and Melilla the same customs regime as that which is granted to products imported from and originating in the European Union.3.For the purpose of applying paragraph 2 of this Article concerning products originating in Ceuta and Melilla, this Protocol shall apply mutatis mutandis subject to the specific conditions set out in Article 42 of this Protocol.

Article 42Specific conditions1.Provided that they have been transported in accordance with Article 15 of this Protocol, the following shall be considered as:

(1)products originating in Ceuta and Melilla:

(a)products wholly obtained in Ceuta and Melilla;

(b)products obtained in Ceuta and Melilla, in the manufacture of which products other than those referred to in (a) are used, provided that:

(i)such products have undergone sufficient working or processing within the meaning of Article 4 of this Protocol; or that

(ii)those products originate in Côte d'Ivoire or in the European Union, provided that they have been subject to working or processing which goes beyond the operations referred to in Article 5 of this Protocol;

(2)products originating in Côte d'Ivoire:

(a)products wholly obtained in Côte d'Ivoire;

(b)products obtained in Côte d'Ivoire, in the manufacture of which products other than those referred to in (a) are used, provided that:

(i)such products have undergone sufficient working or processing within the meaning of Article 4 of this Protocol; or that

(ii)those products originate in Ceuta and Melilla or in the European Union within the meaning of this Protocol, provided that they have been subject to working or processing which goes beyond the operations referred to in Article 5 of this Protocol.

2.Ceuta and Melilla shall be considered as a single territory.3.The exporter or its authorised representative shall enter ‘....’ and ‘Ceuta and Melilla’ in box 2 of movement certificates EUR.1 or on origin declarations. In addition, in the case of products originating in Ceuta and Melilla, originating status shall be indicated in box 4 of movement certificates EUR.1 or on origin declarations.4.The Spanish customs authorities shall be responsible for the application of this Protocol in Ceuta and Melilla.

Title VII — final provisions

Article 43Revision and application of rules of origin1.In accordance with Article 73 of the Agreement, the EPA Committee may, each time Côte d'Ivoire or the European Union so requests, examine the application of the provisions of this Protocol and their economic effects with a view to making any necessary adjustments or amendments. The EPA Committee shall take into account, among other elements, the impact of technological developments on the rules of origin.2.Notwithstanding paragraph 1 of this Article, this Protocol and the Annexes thereto shall be reviewed and, if necessary, revised before the end of a period of five (5) years from the date of entry into force of this Protocol, in accordance with the obligations of Article 14 of the Agreement. This review shall also cover Annex II-A to this Protocol in order to establish whether or not to renew it.3.In accordance with Article 34 of the Agreement, the Committee shall monitor the implementation and management of this Protocol and take decisions concerning, inter alia:

(a)cumulation, under the conditions laid down in Article 8 of this Protocol;

(b)the derogations to the provisions of this Protocol, under the conditions laid down in Article 40 thereof;

(c)the automatic derogation for canned tuna and tuna loins provided for in Article 40(8) of this Protocol, under the conditions laid down in Article 40 of this Protocol;

(d)an extension of the three-year period referred to in point (b) Article 21(1) of this Protocol based on evidence that Côte d'Ivoire is not ready to implement the legislation on registered exporters;

(e)the threshold of EUR 6000 referred to in Article 21(1)(c) of this Protocol.

Article 44AnnexesThe Annexes to this Protocol shall form an integral part of this Protocol.

Article 45Implementation of the ProtocolThe European Union and Côte d'Ivoire shall, each on its own behalf, take the measures necessary for the implementation of this Protocol, including:

(a)the national and regional arrangements required for the implementation and enforcement of the rules and procedures laid down in this Protocol, in particular the arrangements necessary for the application of the articles on cumulation;

(b)the establishment of the administrative structures and systems necessary for the appropriate management and verification of the origin of products.

Article 46Transitional provisions for goods in transit or storageThe provisions of the Agreement may be applied to goods which comply with the provisions of this Protocol and which on the date of entry into force of this Protocol are either in transit or are in the European Union or in Côte d'Ivoire in temporary storage, in customs warehouses or in free zones, subject to the submission to the customs authorities of the importing country, within ten (10) months of that date, of a movement certificate EUR.1 made out retrospectively by the customs authorities of the exporting country together with the evidence of compliance with Article 15 of this Protocol.