China Surtax Remission Order (2024)

Her Excellency the Governor General in Council, on the recommendation of the Minister of Finance, makes the annexed China Surtax Remission Order (2024) under section 115 of the Customs Tariff.^notenote

Remission

Coming into Force

Schedule 1 · (Subsection 1(1) and paragraph 1(2)(a))

| Column 1 | Column 2Item | Tariff Item | Description of Goods1 | 7210.12.00 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated, or coated with tin, of a thickness of less than 0.5 mm2 | 7210.70.00 | Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, painted, varnished, or coated with plastics3 | 7212.10.00 | Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, plated, or coated with tin3.1 | 7212.30.00.10 | Flat-rolled products manufactured from non-alloy steel that have a width of less than 600 mm, are plated or coated with zinc, are of Grade DX51D or an equivalent grade and have a thickness of 0.14 mm4 | 7219.22.00.10 | Stainless steel plates, hot-rolled, not in coils, of a thickness of at least 4.75 mm but not exceeding 10 mm, of a width of 600 mm or more but not exceeding 1,830 mm5 | 7219.23.00 | Stainless steel sheets and plates, hot-rolled with 2B finish, of type 304 or 304L, with 11 gauge thickness, width of 5 feet, length of 20 feet, of specification ASTM A2406 | 7219.23.00 | Stainless steel sheets and plates, hot-rolled with 2B smooth finish, of type 304 or 304L, with 11 gauge thickness, width of 6 feet, length of 12 feet, of specification ASTM A2407 | 7219.31.00 | Stainless steel sheets and plates, cold-rolled with 2B smooth finish, of type 304 or 304L, with 3/16 inch thickness, width of 5 feet, length of at least 10 feet but not exceeding 20 feet, of specification ASTM A2407.1 | 7219.33.00.10 | Polished stainless steel coils and sheets of the following grades and finishes: – grade 304, finish No. 4– grade 316, finish No. 2B– grade 316, finish No. 4– grade 304, finish BA17.2 | 7219.33.00.90 | Polished stainless steel coils and sheets of grades 304 or 430 and finish No. 47.3 | 7219.34.00.10 | Polished stainless steel coils and sheets of grade 304 and finish No. 47.4 | 7219.34.00.90 | Polished stainless steel coils and sheets of grade 430 and finish No. 48 | 7220.20.00 | Flat-rolled stainless steel products, with a width of less than 600 mm, not further worked than cold-rolled (cold-reduced), for use in the production of goods classified under tariff item 7310.10.009 | 7222.19.00.21 | Stainless steel flat bars, not further worked than hot-rolled, hot-drawn, or extruded10 | 7222.20.00 | Stainless steel metric round bars, of type 304, cold-rolled, h9 tolerance, with an outer diameter of 16 mm, 20 mm, 25 mm, 30 mm, 35 mm, 40 mm, 50 mm or 60 mm, of specification ASTM A27610.1 | 7222.20.00.91 | Stainless steel bars and rods, not further worked than cold-formed or cold-finished, of grade 304 or 304L11 | 7222.30.00 | Stainless steel metric square bars of 30 mm or 40 mm, of type 304, cold-rolled, of length 4000 mm, of specification ASTM A27612 | 7223.00.00 | Stainless steel lashing wire or rebar tie wire13 | 7223.00.00 | Ultra-fine stainless steel wire, with a diameter of 0.15 mm or 0.28 mm13.1 | 7223.00.00.90 | Stainless steel wire with a triangular (delta) profile and a solid cross-section that is manufactured from grade 304, 304L, 316 or 316L stainless steel, and that has a hardness of 28 to 32 HRC, a cross-sectional area greater than 0.787 mm² and dimensions of 0.090 inch by 0.105 inch14 | 7225.11.00 | Silicon grain-oriented steel, with a width of 600 mm or more15 | 7225.99.00 | Specialty steel products: S-7 VRM steel plates, D-2 VRM steel plates or A-2 VRM steel plates16 | 7226.11.00 | Silicon grain-oriented steel, with a width of less than 600 mm17 | 7226.19.00 | Silicon amorphous steel, with a width of less than 600 mm18 | 7226.99.00 | Specialty steel products of grade 4140, heat-treated, annealed19 | 7228.30.00 | Round specialty steel products, of the following grades: of grade 4340, heat-treated, of grade 8620, of grade 3312, hot-rolled, annealed, of grade 1045, hot-rolled, of grade 1018, hot-rolled or of grade EN30B20 | 7228.40.00 | Alloy steel bars and rods21 | 7228.50.00 | Other bars of other alloy steel, not further worked than cold-formed or cold-finished21.01 | 7228.50.00.20 | Tool steel flat bars that are manufactured from alloy grades A8 MOD or H13 and that have a thickness of 1.375 inches or 3.00 inches21.02 | 7228.50.00.20 | Tool steel round bars that are manufactured from alloy grades D2 or A2 and that have diameters of at least 5.50 inches but not exceeding 13.00 inches21.1 | 7228.60.00 | Bars, of alloy or non-alloy steel, with an outside diameter of at least 25 mm but not exceeding 203 mm, with a wall thickness of at least 5 mm but not exceeding 38 mm and a length not exceeding 12 m, with forged or machined ends21.2 | 7304.11.00 | Seamless stainless steel tubes, of circular cross-section, with an external diameter not exceeding 114.3 mm22 | 7304.19.00 | Unfinished seamless carbon or alloy steel mother tubes that have an outside diameter of at least 184 mm but not exceeding 610 mm, a wall thickness of at least 9 mm but not exceeding 110 mm and a length of at least 7.72 m but not exceeding 15.24 m, that are not stenciled as meeting any line pipe product specification and that are suitable for use in the production, and not solely the finishing, of seamless line pipes manufactured to API 5L, CSA Z245.1, ISO 3183, ASTM A333, ASTM A335, ASTM A106, or ASTM A5323 | 7304.23.00 | Drill pipes, other than of stainless steel, of specification API 5DP or API 7-124 | 7304.29.00.79 | Tubes, pipes and hollow profiles, seamless, of iron — other than cast iron — or steel: coupling stock, with an outside diameter of at least 2.875 inches but not exceeding 37 inches24.1 | 7304.31.00 | Cold-drawn seamless mechanical tube of grade C1026, with an outside diameter of at least 2.625 inches but not exceeding 4.25 inches, with an inside diameter of at least 1.75 inches but not exceeding 4 inches, and a wall thickness of at least 0.313 inch but not exceeding 1 inch24.2 | 7304.39.00 | Steel coupling stock, of specification API 5CT L80, no coating24.3 | 7304.39.00.70 | Seamless tubes and pipes, of iron or non-alloy steel, for use in oil and gas applications, with an outside diameter of at least 25 mm but not exceeding 406 mm, with a wall thickness of at least 3 mm but not exceeding 50 mm, with lengths not exceeding 12 m24.4 | 7304.49.00.90 | Seamless tubes and pipes, of stainless steel, annealed and pickled or bright finish, for oil and gas service, with an outside diameter of at least 25 mm but not exceeding 273 mm, with a wall thickness of at least 2 mm but not exceeding 30 mm, with lengths not exceeding 12 m24.5 | 7304.51.00 | (a)Seamless tubes and pipes, of alloy steel, cold-drawn or cold-rolled, for use in drill pipe and completions equipment, with lengths up to 12 m, with an outside diameter of at least 25 mm but not exceeding 355 mm, with a wall thickness of at least 3 mm but not exceeding 40 mm;(b)Seamless or ERW carbon steel tubes, of grade 1010 or 1020, with an outside diameter of at least 4.95 inches but not exceeding 14.00 inches24.6 | 7304.59.00 | Seamless tubing of alloy-steel, hot-finished, of an outside diameter of 5.50 inches and an inside diameter of 3.865 inches25 | 7304.59.00.60 | (a)Alloy mechanical tubes of grade 4140 or 4130 Mod, of specification ASTM A519, with an external diameter of at least 3.5 inches but not exceeding 10 inches, of a wall thickness of at least 0.3 inch but not exceeding 1.5 inches, and black lacquer protective coating;(b)Seamless tubes, of alloy steel, with lengths not exceeding 12 m, of a kind used for oil or gas pipelines with an outside diameter of at least 25 mm but not exceeding 355 mm25.01 | 7304.90.00.10 | Seamless non-alloy steel tubes in the form of irregular or oval mother tubes that have an outer diameter of at least 20 mm but not exceeding 150 mm and a length of at least 8 m but not exceeding 12 m25.02 | 7304.90.00.20 | Seamless alloy steel tubes in the form of irregular or oval mother tubes that have an outer diameter of at least 20 mm but not exceeding 150 mm and a length of at least 8 m but not exceeding 12 m25.1 | 7305.31.00.19 | Longitudinally welded pipes of grade 3 ASTM A25225.2 | 7305.39.00.20 | Spiral welded steel pipes, of circular cross-sections25.21 | 7306.30.00.41 | Welded steel tubes drawn over mandrel (DOM) that have circular cross-sections, and that have outer diameters of at least 4.95 inches but not exceeding 14.35 inches, a wall thickness of at least 0.185 inch but not exceeding 0.250 inch and inner diameters of at least 4.58 inches but not exceeding 13.85 inches25.3 | 7306.29.00 | Welded tubes of iron or non-alloy steel, with an outside diameter of at least 19.1 mm but not exceeding 88.9 mm, and a wall thickness of at least 2.0 mm but not exceeding 7.6 mm25.4 | 7306.30.00.51 | Carbon steel DOM (drawn over mandrel) structural tubing, grade 1026, with an outside diameter exceeding 60.325 mm but not exceeding 168.28 mm, of specification ASTM A513, A106 or A51925.5 | 7306.30.00.59 | Carbon steel DOM (drawn over mandrel) tubing, other than structural, grade 1026, with an outside diameter exceeding 60.325 mm but not exceeding 168.28 mm, of specification ASTM A513, A106 or A51925.6 | 7306.30.00.61 | Carbon steel DOM (drawn over mandrel) structural tubing, grade 1026, with an outside diameter exceeding 168.28 mm but not exceeding 273.05 mm, of specification ASTM A513, A106 or A51925.7 | 7306.40.00.00 | Stainless steel of grade 304L flared tubes26 | 7306.40.00.10 | Stainless steel tubes, circular, of type 304L, with an external diameter not exceeding 25.3 mm27 | 7306.40.00.20 | Stainless steel tubes, circular, of type 304L, with an external diameter exceeding 25.3 mm but not exceeding 114.9 mm27.1 | 7306.50.00 | Welded tubes of circular cross-section, of alloy steel other than stainless steel, with an outside diameter of at least 19.1 mm but not exceeding 88.9 mm, with a wall thickness of at least 2.0 mm but not exceeding 7.6 mm28 | 7306.61.00.39 | Steel tubes — other than galvanized — rectangular, of type 304L, with an external periphery not exceeding 812.8 mm29 | 7604.21.00 | Aluminum alloy hollow profiles with a powder coating finish on the interior and exterior surfaces30 | 7604.29.00 | Aluminum alloy bars, rods and profiles: Die #C300X110, Die #C410X110 or Die #169330.1 | 7604.29.00.11 | Bars of aluminum alloys, of round cross-section, with a cross-sectional dimension exceeding 12.7 mm31 | 7605.19.00 | Non-alloyed aluminum wire, with cross-sectional dimension not exceeding 7 mm, of grade AL-1350, compliant with the chemical requirements referred to in Table 2 of specification ASTM B233-97, of any of the following dimensions:– 0.175 inches in length by 0.075 inches in width– 0.175 inches in length by 0.095 inches in width– 0.200 inches in length by 0.105 inches in width– 0.250 inches in length by 0.105 inches in width– 0.256 inches in length by 0.128 inches in width– 0.312 inches in length by 0.130 inches in width– 0.250 inches in length by 0.150 inches in width– 0.312 inches in length by 0.165 inches in width32 | 7606.11.00 | Non-alloyed aluminum plates, sheets and strip, with a thickness exceeding 0.2 mm, rectangular, compliant with specification ASTM B209 or equivalent industry specifications, flat 2 mm per metre in all directions, with diagonals that do not measure a difference of more than 4 mm, no visible ripples on any sheet and no scratches, gouges or residual oils33 | 7606.11.00 | Non-alloyed aluminum plates, sheets and strip, with a thickness exceeding 0.2 mm, rectangular, used as cathode sheets in zinc electrowinning processes34 | 7606.11.00 | Non-alloyed aluminum plates, sheets and strip, rectangular, of grade 1050 Aluminum “O” Coil or grade 1350 Aluminum “O” Coil, compliant with the chemical requirements of specification ASTM B233-97, with a thickness of at least 0.020 inches but not exceeding 0.060 inches, a width of at least 2 inches but not exceeding 33.5 inches, and a mill finish35 | 7606.12.00 | Aluminum alloy plates, sheets and strip, of a thickness exceeding 0.2 mm, rectangular35.1 | 7606.12.00 | Rectangular aluminum sheets that are manufactured from alloy AA3105, meet specification ASTM B209 and are coated in polyester paint36 | 7606.12.00.11 | (a)Aluminum checker plate sheets of alloy 3003, with a base thickness of 4 mm, width of 4 feet and length of 10 feet;(b)Pre-painted aluminum coils, 3003-H24 with 8 or 12 µm polyester coating in black, brown or white, with a thickness of 0.5 mm and width of 610 mm;(c)Aluminum coils of alloy 5005, H14 or H34, anodized quality, not clad, with a thickness exceeding 0.2 mm but less than 7 mm;(d)Pre-painted aluminum coils, 3105-H26, with a thickness of at least 0.7 mm but not exceeding 0.8 mm, and a width of at least 1,240 mm but not exceeding 1,250 mm37 | [Repealed, SOR/2025-210, s. 12]37.1 | [Repealed, SOR/2025-210, s. 12]38 | 7606.12.00.12 | Aluminum alloy plates, sheets and strip, with a thickness of 7 mm or more, rectangular, not clad, compliant with specification ASTM B209 or equivalent industry specifications, flat 2 mm per metre in all directions, with diagonals that do not measure a difference of more than 4 mm, no visible ripples on any sheet and no scratches, gouges or residual oils38.1 | 7606.12.00.12 | Aluminum coils of alloy 5005, H14 or H34, anodized quality, not clad, with a thickness of 7 mm or more38.2 | 7606.91.00.90 | Aluminum plates, in sheets and strips, that are manufactured from non-alloyed aluminum, have a thickness of at least 3.0 mm but not exceeding 5.5 mm, are circular and have a diameter of at least 100 mm38.21 | 7606.92.00 | Non-rectangular aluminum sheets that are manufactured from alloy AA3105, meet specification ASTM B209 and are coated in polyester paint38.3 | 7607.11.00 | Aluminum foil, rolled but not further worked, not backed, in coils or reels, with a thickness of at least 0.004 inch but not exceeding 0.010 inch, and a width of at least 0.98 mm but not exceeding 22 inches, whether or not surface-treated38.4 | 7607.11.00.20 | Aluminum foil, in rolls, that have a thickness of at least 0.013 mm but not exceeding 0.017 mm, a width of at least 5 inches and a maximum length of 1700 feet, and that are manufactured from alloy 1145, 1235, 8011, 8079, or 806639 | 7607.19.00.00 | (a)Aluminum foil, with a thickness not exceeding 0.2 mm, not backed, other than rolled but not further worked, of alloys 3003, 3004, 3104, 8011 or 8111;(b)Aluminum foil, in precut sheets, that has a thickness of at least 0.013 mm but not exceeding 0.017 mm, a minimum width of 5 inches and a maximum length of 16 inches, and that is manufactured from alloy 1145, 1235, 8011, 8079, or 806639.1 | 7608.20.00 | Rigid aluminum conduit, threaded, in 10-foot lengths, in trade sizes of at least 0.5 inch but not exceeding 6 inches, with coupling on one end40 | 7609.00.00 | Aluminum tube or pipe fittings, of the following specifications:Wall thickness: approximately 0.106 inches at the thinnest point to approximately 0.783 inches at the thickest pointOuter diameter: at least 1 inch but not exceeding 10 inchesLength: at least 2 inches but not exceeding 12 inchesCylindrical shape, of the following grades and specifications:Grade: AA383, Specification: B85Grade: AA713, Specification: B26Grade: AA356 / AA356-T6, Specification: B108Grade: 413.2, Specification: B179Note If the description in column 2 covers only a subset of goods classified under the tariff item referred to in column 1, remission is granted only for the goods described in column 2.

Schedule 2 · (Subsection 1(1) and paragraph 1(2)(b))

| Column 1 | Column 2 | Column 3 | Column 4 | Column 5Item | Business Number | Tariff Item | Description of Goods | Period | Conditions1 | 102645082 | 7607.11.00 | Aluminum foil, with a thickness not exceeding 0.2 mm, not backed, rolled but not further worked | From October 22, 2024 to December 31, 2026 | 1.1 | 103569372 | 7229.90.00 | Chrome silicon wire, round, with a diameter of at least 1.5 mm but not exceeding 8.51 mm | From October 22, 2024 to December 31, 2026 | 1.2 | 105489272 | 7212.40.00 | Steel strapping, with open or closed steel sleeves | From October 22, 2024 to August 31, 2025 | 7217.90.00 | Steel black annealed wire coils, rebar tie wire and galvanized black annealed wire coils | From October 22, 2024 to December 31, 20261.3 | 105497242 | 7223.00.00.90 | Stainless steel wires of alloy 304L, cold drawn and annealed | From October 22, 2024 to July 1, 2025 | 2 | 119446847 | 7228.30.00.72 | Hot-rolled steel bars, of special bar quality | From October 22, 2024 to December 31, 2026 | 3 | 122960222 | 7606.91.00.10 | Aluminum plates, sheets and strip, with a thickness exceeding 0.2 mm, circular, with circumference from at least 6 inches but not exceeding 20 inches | From October 22, 2024 to December 31, 2026 | 4 | 137864229 | 7305.31.00 | Coated permanent steel piles, longitudinally welded, with a pipe outer diameter of 1.219 m, a thickness of 25.4 mm and lengths not exceeding 95 m | From October 22, 2024 to December 31, 2026 | 7305.39.00 | Spiral-welded steel piles that are used as temporary piles, and that have an outer diameter of at least 0.914 m but not exceeding 1.067 m and a length of at least 41 m but not exceeding 75 m4.1 | 140515958 | 7604.29.00.30 | Extruded 5-star (blade) turbulator, with a diameter of 8.30 mm of alloy 6063, of temper T5, of straight lengths of up to 4877 mm | From October 22, 2024 to December 31, 2026 | 7606.12.00.20 | Extruded rectangular micro channel tubes, 76.2 mm x 9.04 mm, with a wall thickness of 0.51 mm, of alloy 3003, of temper F, of straight lengths of up to 4877 mm | From October 22, 2024 to December 31, 2026 | 7608.20.00 | Extruded round thin-walled aluminum tubes, of alloy 3003, of temper O, with an outside diameter of 9.09 mm, with a wall thickness of 0.51 mm, spooled on level wound coils | From October 22, 2024 to December 31, 2026 | 5 | 709514509 | 7304.39.00 | Steel coupling stock or mechanical tubes, no coating, with diameter of at least 4 inches but not exceeding 20 inches, with a wall thickness of at least 0.5 inch but not exceeding 2 inches, imported in lots of random length tubes not exceeding 30 feet, and that are:(a)of specification ASTM A519/A513, of grade 1026, 4140, or 4130;(b)of specification API 5CT, of grade K55, L80, P110, C110, or Q125 | From October 22, 2024 to December 31, 2025 | 5.1 | 723429320 | 7305.39.00.20 | Welded tubes manufactured from non-alloy steel that have circular cross-sections and an outer diameter of at least 1 m but not exceeding 3.2 m, a wall thickness of at least 19 mm but not exceeding 33 mm and a length not exceeding 50 m, and that are used as single-wall steel casing in drilling foundation piles | From October 22, 2024 to December 31, 2026 | 7305.31.00.19 | Longitudinally welded tubes manufactured from non-alloy steel that have an outside diameter of at least 1 m but not exceeding 3.2 m, a wall thickness of at least 19 mm but not exceeding 33 mm and a length not exceeding 50 m | From October 22, 2024 to December 31, 2026 | 6 | 729240341 | 7606.12.00 | Flat-rolled aerospace-grade aluminum, of alloys 7475, 7075 or 2024 | From October 22, 2024 to December 31, 2025 | Imported for sale to company with business number 8713613667 | 729240341 | 7606.12.00.12 | Aluminum alloy plates, sheets and strip, rectangular, not clad, with a thickness of 7 mm or more | From October 22, 2024 to March 31, 2025 | Imported for sale to company with business number 8610721638 | 736401290 | 7223.00.00.90 | Stainless steel profile wire with a solid cross-sectional area greater than 0.787 mm2 | From October 22, 2024 to December 31, 2026 | 7306.40.00.10 | Stainless steel capillary line9 | 737151720 | 7604.21.00.10 | Aluminum hollow profiles, unworked | From October 22, 2024 to December 31, 2026 | 7606.12.00.20 | Aluminum alloy plates, sheets and strip, with a thickness exceeding 0.2 mm, rectangular, clad9.01 | 741519524 | 7222.11.00.10 | Stainless steel rebar | From October 22, 2024 to December 31, 2026 | 9.1 | 747545747 | 7217.10.00 | Non-alloy steel wire, not plated or coated, whether polished or not | From October 22, 2024 to December 31, 2025 | 7217.30.00 | Copper plated steel wires, plated or coated with other base metal | From October 22, 2024 to June 1, 20269.2 | 756550901 | 7604.29.00.30 | Aluminum profiles, extruded, with a cross-sectional dimension exceeding 254 mm, supplied in straight lengths | From October 22, 2024 to December 31, 2026 | 10 | 758833297 | 7210.70.00.90 | Pre-painted steel coils PPGI or PPGL, with a thickness of at least 0.37 mm but not exceeding 0.45 mm, AZ100 g/M² with polyester and epoxy coating in black or brown, and a width of at least 590 mm but not exceeding 1220 mm | From October 22, 2024 to December 31, 2026 | 11 | 761094119 | 7607.11.00 | Aluminum foil, with a thickness not exceeding 0.2 mm, not backed, rolled but not further worked | From October 22, 2024 to December 31, 2026 | 12 | 769792870 | 7607.11.00 | Aluminum foil (whether or not printed or backed with paper, paperboard, plastics or similar backing materials) of a thickness (excluding any backing) not exceeding a length of 0.2 mm, rolled but not further worked, of alloy 3003 or 3004, with food-safe lubrication | From October 22, 2024 to December 31, 2026 | 13 | 778340406 | 7606.12.00.20 | Aluminum sheets, with a thickness exceeding 0.2 mm, rectangular, clad, of alloy 3003 or 4045 | From October 22, 2024 to December 31, 2026 | 7606.92.00.00 | Aluminum plates, sheets and strip, with a thickness exceeding 0.2 mm, other than rectangular, of alloy 4043, 4045, 3003, 3005 or 70727607.11.00.20 | Aluminum foil, not backed, rolled but not further worked, with a thickness of 0.005 mm or more but less than 0.127 mm, of alloy 300314 | 782889604 | 7210.12.00 | Electrolytic tinplate of iron or non-alloy steel, batch annealed materials or box annealed materials, with a thickness of less than 0.50 mm and width of more than over 600 mm | From October 22, 2024 to December 31, 2026 | Imported for sale to company with business number 10470840914.01 | 795006428 | 7304.39.00.90 | Seamless steel tubes of non-alloy steel, of a circular cross-section, with an outside diameter of at least 1 m but not exceeding 3 m, a wall thickness of at least 25 mm but not exceeding 30 mm, meeting specifications equivalent to CSA G40.20-13/G40.21-13 or ASTM A572 | From October 22, 2024 to December 31, 2026 | 14.02 | 797799673 | 7306.30.00 | Steel electrical metallic tubing (EMT), galvanized, non-threaded, in 10-foot lengths, trade size of at least 1.5 inches but not exceeding 4 inches | From October 22, 2024 to December 31, 2026 | 14.1 | 798045084 | 7604.21.00.90 | Aluminum bars, rods and profiles, hollow profiles, other | From October 22, 2024 to December 31, 2026 | 15 | 808739577 | 7607.11.00 | Aluminum foil, with a thickness not exceeding 0.2 mm, not backed, rolled but not further worked | From October 22, 2024 to December 31, 2026 | 15.1 | 813792462 | 7607.11.00.20 | Aluminum foil, not backed, rolled but not further worked, with a thickness of at least 0.005 mm but not exceeding 0.127 mm, of alloy 8079 | From October 22, 2024 to December 31, 2026 | 16 | 842474249 | 7217.10.00.43 | Spring wire, with a diameter of 1.0 mm or more but less than 1.5 mm | From October 22, 2024 to December 31, 2026 | 7217.10.00.44 | Spring wire, with a diameter of 1.5 mm or more but less than 3 mm17 | 858299928 | 7606.91.00 | Aluminum plates, sheets and strip, with a thickness exceeding 0.2 mm, other than rectangular, non-alloyed, of the 1000, 5000 or 8000 series | From October 22, 2024 to December 31, 2026 | 7606.92.00 | Aluminum plates, sheets and strip, with a thickness exceeding 0.2 mm, other than rectangular, alloyed, of the 1000, 5000 or 8000 series7607.11.00 | Aluminum foil, with a thickness not exceeding 0.2 mm, not backed, rolled but not further worked, of the 1000, 5000 or 8000 series7607.19.00 | Aluminum foil, with a thickness not exceeding 0.2 mm, not backed, other than rolled but not further worked, of the 1000, 5000 or 8000 series18 | 861072163 | 7606.12.00.12 | Aluminum alloy plates, sheets and strip, rectangular, not clad, with a thickness of 7 mm or more | From April 1, 2025 to December 31, 2026 | 19 | 861206423 | 7306.50.00.00 | Steel tubes, circular, cold-rolled, of specification ASTM A500 gr A | From October 22, 2024 to December 31, 2026 | 7306.61.00.39 | Steel tubes, rectangular, cold-rolled, of specification ASTM A500 gr A7306.69.00.39 | Steel tubes, oval, of specification ASTM A500 gr A20 | 863579827 | 7607.11.00 | Aluminum foil, with a thickness not exceeding 0.2 mm, not backed, rolled but not further worked | From October 22, 2024 to December 31, 2026 | 21 | 872321203 | 7606.12.00 | Aluminum alloy plates, sheets and strip, with a thickness exceeding 0.2 mm, rectangular | From October 22, 2024 to December 31, 2026 | 22 | 872889514 | 7228.40.00 | Steel bars with an outer diameters of at least 7.1 inches but not exceeding 26.6 inches, of grade 4130, of specification API 6A | From October 22, 2024 to December 31, 2026 | 23 | 876686320 | 7607.11.00 | Aluminum foil, with a thickness not exceeding 0.2 mm, not backed, rolled but not further worked | From October 22, 2024 to December 31, 2026 | 24 | 882092562 | 7219.90.00 | #301 Full Hard Stainless Steel coil, with thickness of 0.02 inches (0.5 mm), width of 1 inch (25 mm), grounded edges, purchased in large coils | From October 22, 2024 to December 31, 2025 | 24.01 | 891389389 | 7225.40.00 | Flat-rolled products of other alloy steel, hot-rolled, of a width of at least 600 mm, including plates and other flat-rolled forms | From October 22, 2024 to December 31, 2026 | 24.1 | 892183476 | 8703.40.90 | Non-plug-in hybrid passenger vehicles, with both a spark-ignition internal combustion piston engine and an electric motor for propulsion, with a cylinder capacity of 1000 cm³ or more | For goods imported on or after October 1, 2024 | Remission limited to a maximum of 554 vehicles24.2 | 895930287 | 7607.11.00.20 | Rolls of aluminum foil with a thickness ranging from 7 µm to 70 µm and a width of at least 40 inches but not exceeding 60 inches | From October 22, 2024 to December 31, 2026 | 25 | 896964400 | 7219.90.00 | Stainless steel sheets, of the following specifications:Grade: 430 BASpecification: ASTM A240Thickness: of at least 0.048 inches but not exceeding 0.073 inchesWidth: 26.25 inchesLength: at least 60 inches but not exceeding 155 inchesNo coating but protective SPV or PVC on one side | From October 22, 2024 to July 31, 2026 | 7606.12.00 | Aluminum alloy sheets, rectangular, of the following specifications:Grade: 3003 H14Specification: ASTM B209Thickness: 0.085 inchesWidth: of at least 28 inches but not exceeding 34.5 inchesLength: at least 60 inches but not exceeding 190 inches26 | 899771042 | 7606.12.00 | Pre-painted aluminum coil, of alloy 3003 or 3105, with a thickness of 0.012 inches, 0.017 inches, 0.0234 inches, 0.027 inches or 0.32 inches | From October 22, 2024 to December 31, 2026 | Imported for sale to company with business number 100980127Note If the description in column 3 covers only a subset of goods classified under the tariff item referred to in column 2, remission is granted only for the goods described in column 3.