Contents
74Flow and volume#
(1)Subject to subsection (2), an operator must ensure that the following are measured:
(a)the rate of flow and the volume of the fluid that is produced from each well;
(b)the rate of flow and the volume of the fluid or waste material that is injected into each well; and
(c)the volume of the fluid that is produced from each well that is used, flared, vented, burned or otherwise disposed of.
(2)Alternate measurements may be conducted if approved by the Board under section 14.
(3)The operator must ensure that all measurements are conducted using the flow system, flow calculation procedure and flow allocation procedure approved under subsection 14(2).
Federal laws of Canada reproduced under the Reproduction of Federal Law Order (SI/97-5); not the official version. Source: Justice Laws Website.