Cargo, Fumigation and Tackle Regulations

Contents

Her Excellency the Governor General in Council, on the recommendation of the Minister of Transport, Infrastructure and Communities, pursuant to paragraphs 35(1)(d), (e) and (g) and subsection 120(1) of the Canada Shipping Act, 2001, hereby makes the annexed Cargo, Fumigation and Tackle Regulations.^note^note

Interpretation

1 #

(1)The following definitions apply in these Regulations.

Act means the Canada Shipping Act, 2001. (Loi)

cargo transport unit means a road freight vehicle, a railway freight wagon, a freight container, a road tank vehicle, a railway tank wagon or a portable tank. (engin de transport)

IMO means the International Maritime Organization. (OMI)

Minister means the Minister of Transport. (ministre)

short-run ferry means a vessel that regularly operates over the most direct water route between two points not more than 5 km apart and that is limited to the transport of unberthed passengers and of cargo transport units carried on an open vehicle deck. (traversier)

SOLAS means the International Convention for the Safety of Life at Sea, 1974 and the Protocol of 1988 relating to the Convention. (SOLAS)

(2)For the purpose of interpreting a document incorporated by reference in these Regulations other than CAN/CSA Standard S826.1-01, Ferry Boarding Facilities, “should” shall be read to mean “shall”.

(3)For the purposes of these Regulations, every reference to “Administration” in a document incorporated by reference in these Regulations means

(a)in respect of a Canadian vessel, the Minister; and

(b)in respect of a foreign vessel, the government of the state whose flag the vessel is entitled to fly.

(4)Unless otherwise indicated in these Regulations, any reference in these Regulations to a document is a reference to the document as amended from time to time.

Application

2 #

(1)Except as otherwise provided in Parts 1 to 3, these Regulations apply in respect of Canadian vessels everywhere and foreign vessels in Canadian waters.

(2)These Regulations, other than section 102, do not apply in respect of

(a)pleasure craft; or

(b)vessels used for commercially catching, harvesting or transporting fish or other living marine resources unless the vessels are 24 m or more in length and their sole participation in those activities is in respect of the catch or harvest of other vessels or of aquaculture facilities.

(3)These Regulations do not apply in respect of vessels that are capable of engaging in the drilling for, or the production, conservation or processing of, oil or gas.

Part 1 · Cargo

Interpretation

100 #

(1)The following definitions apply in this Part.

BLU Code means the Code of Practice for the Safe Loading and Unloading of Bulk Carriers, published by the IMO. (Recueil BLU)

bulk cargo means any cargo that is generally uniform in composition and is loaded directly into the cargo space of a vessel without any intermediate form of containment. (cargaison en vrac)

company

(a)in respect of a Canadian vessel, means its authorized representative; and

(b)in respect of a foreign vessel, has the meaning assigned by regulation 1 of Chapter IX of SOLAS. (compagnie)

CSS Code means the Code of Safe Practice for Cargo Stowage and Securing, published by the IMO. (Recueil CSS)

dangerous goods, except in Division 2, means the substances, materials and articles covered by the IMDG Code. (marchandises dangereuses)

IMDG Code means the International Maritime Dangerous Goods Code, published by the IMO. (Code IMDG)

inland voyage has the same meaning as in section 1 of the Vessel Safety Certificates Regulations. (voyage en eaux internes)

inland waters of Canada has the same meaning as in section 1 of the Vessel Safety Certificates Regulations. (eaux internes du Canada)

International Grain Code means the International Code for the Safe Carriage of Grain in Bulk, published by the IMO. (Recueil international de règles sur les grains)

near coastal voyage, Class 2 has the same meaning as in section 1 of the Vessel Safety Certificates Regulations. (voyage à proximité du littoral, classe 2)

packaged goods means dangerous goods in a form of containment specified in the IMDG Code for those goods. (marchandises emballées)

sheltered waters voyage has the same meaning as in section 1 of the Vessel Safety Certificates Regulations. (voyage en eaux abritées)

(2)For the purpose of this Part, a vessel is constructed on the earliest of

(a)the day on which its keel is laid,

(b)the day on which construction identifiable with a specific vessel begins, and

(c)the day on which assembly of the vessel reaches the lesser of 50 tonnes and 1% of the estimated mass of all structural material.

Exemptions and Equivalents

101 #

For the purposes of this Part, the Marine Technical Review Board established under section 26 of the Act may exercise the powers of the Administration under regulations 4 and 5 of Chapter I of SOLAS.

General — Marking Mass of One Tonne or More

102 #

(1)No person shall consign to be loaded on a vessel in Canadian waters a package or object of a gross mass of one tonne or more unless its gross mass is clearly and durably marked on the outside of the package or object.

(2)The authorized representative and the master of a vessel in Canadian waters, and every agent charged with loading a vessel in Canadian waters, shall not cause or permit to be loaded on the vessel a package or object of a gross mass of one tonne or more unless its gross mass is clearly and durably marked on the outside of the package or object.

(3)If the exact mass of the package or object would be difficult to ascertain because of its nature, an approximate mass may be marked accompanied by the word “approximate” or “approximatif”, or a reasonable abbreviation.

^note

Division 1 — Cargo Other Than Bulk Cargo or Dangerous Goods

Application

103 #

This Division applies in respect of loading and carrying cargo other than bulk cargo or dangerous goods.

Regulations 2 and 5.1 to 5.5 of Chapter VI of SOLAS

104 #

(1)Every shipper of cargo to be loaded in Canadian waters shall comply with regulation 2 of Chapter VI of SOLAS.

(2)Every person who packs cargo shall comply with regulations 5.2 and 5.5 of Chapter VI of SOLAS.

(3)The master of a vessel shall ensure that the requirements of regulations 5.1, 5.3 and 5.4 of Chapter VI of SOLAS are met.

Cargo Securing Manual

105 #

(1)The master of a vessel engaged on or about to engage on a voyage shall ensure that the requirements of regulation 5.6 of Chapter VI of SOLAS are met and keep on board the Cargo Securing Manual referred to in that regulation unless

(a)the vessel is a Canadian vessel engaged or about to engage on a sheltered waters voyage or a near coastal voyage, Class 2; or

(b)the vessel is engaged or about to engage on an inland voyage.

(2)For the purposes of regulation 5.6 of Chapter VI of SOLAS, the Minister shall, on application, approve a Cargo Securing Manual if it is drawn up to a standard at least equal to the standard set out in the Annex to Appendix 2 to the CSS Code.

^note

Division 2 — Solid Bulk Cargo Other Than Grain

Interpretation

106 #

(1)The following definitions apply in this Division.

BC Code [Repealed, SOR/2021-60, s. 2]

concentrates means materials that are obtained from a natural ore by a process of enrichment or benificiation by physical or chemical separation and removal of unwanted constituents. (concentrés)

dangerous goods means materials that are covered by the IMDG Code and are solid bulk cargo. (marchandises dangereuses)

double-side skin means, in respect of a vessel, that each side of the vessel is constructed by the side shell and a longitudinal bulkhead that connects the double bottom and the deck. Hopper side tanks and top-side tanks may, if fitted, be integral parts. (double muraille)

IMSBC Code means the International Maritime Solid Bulk Cargoes Code, published by the IMO. (Code IMSBC)

incompatible, in respect of two or more kinds of goods, means that the goods may react dangerously when mixed. (incompatible)

length, in respect of a vessel, means 96% of the total length on a waterline at 85% of the least moulded depth measured from the top of the keel, or the length from the fore side of the stem to the axis of the rudder stock on that waterline if that is greater. In vessels designed with a rake of keel, the waterline on which the length is measured shall be parallel to the designed waterline. (longueur)

single-side skin construction, in respect of vessel, means that

(a)any part of a cargo hold is bounded by the side shell; or

(b)one or more cargo holds are bounded by a double-side skin with a width measured perpendicular to the side shell of less than 760 mm in vessels constructed before January 1, 2000 and less than 1 000 mm in vessels constructed on or after January 1, 2000 but before July 1, 2006. (muraille simple)

solid bulk cargo means any bulk cargo other than liquid or gas. (cargaison solide en vrac)

space means an enclosed space in a vessel. (espace)

(2)If dangerous goods are carried on barges that are joined together and towed as a single unit, those barges shall be regarded as a single vessel for the purposes of this Division.

(3)For the purposes of this Division, every reference to “competent authority”, “authority of the port of State” or “appropriate authority” in the IMSBC Code means

(a)in the case of a vessel in Canadian waters or a Canadian vessel in international waters, the Minister;

(b)in the case of a vessel in the waters of a foreign state, the government of that state; and

(c)in the case of a foreign vessel in international waters, the government of the state whose flag the vessel is entitled to fly.

Application

107 #

This Division applies in respect of loading, carrying and unloading solid bulk cargo other than grain.

General

Chapter VI of SOLAS and the IMSBC Code

108 #

(1)The master of a vessel shall ensure that the requirements of the following are met:

(a)regulation 3.1 of Chapter VI of SOLAS;

(b)Part B of Chapter VI of SOLAS, except in so far as the requirements apply to the terminal representative; and

(c)subject to section 117, the IMSBC Code.

(2)Every terminal representative shall ensure that the requirements of Part B of Chapter VI of SOLAS that apply to terminal representatives are met.

(3)Regulation 7.2 of Chapter VI of SOLAS does not apply before January 1, 2011 in respect of a Canadian vessel that is not a Safety Convention vessel if the master has comprehensive information on the following:

(a)the effects of loading, carrying and unloading solid bulk cargo on the vessel’s stability; and

(b)the distribution of solid bulk cargo so as not to overstress the vessel’s structure under standard loading conditions.

(4)The master and the terminal representative shall ensure that the plan required by regulation 7.3 of Chapter VI of SOLAS contains the information required by Appendix 2 to the BLU Code. For vessels in respect of which subsection (3) applies, the plan need not contain the calculated values of maximum permissible bending moments and shear forces.

(5)The master shall keep a copy of the plan on board.

(6)For the purposes of this section in respect of loading or unloading a vessel in Canadian waters, the reference in Part B of Chapter VI of SOLAS to “the appropriate authority of the port State” shall be read as a reference to “the terminal operator”.

(7)In this section, terminal representative has the same meaning as in regulation 7.1 of Chapter VI of SOLAS.

Chapter XII of SOLAS

109 #

(1)The authorized representative of a Safety Convention vessel of 150 m or more in length that has a single-side skin construction, was constructed before July 1, 1999 and is carrying solid bulk cargo that has a density of 1 780 kg/m³ or more shall ensure that the vessel complies with regulations 6.1.1 to 6.1.3 of Chapter XII of SOLAS

(a)in the case of a vessel constructed 17 years or more before the day on which this section comes into force, no later than the day on which this section comes into force; and

(b)in the case of a vessel constructed less than 17 years before the day on which this section comes into force, on the earliest of

(i)the seventeenth anniversary of the date of its construction,

(ii)the day on which this section comes into force if on or before that day and after the fifteenth anniversary of the date of its construction the vessel had a periodical inspection required by regulation 2 of Chapter XI of SOLAS, and

(iii)the day on which it has its first periodical inspection required by regulation 2 of Chapter XI of SOLAS after the fifteenth anniversary of the date of its construction if that day is after the day on which this section comes into force.

(2)The master of a Safety Convention vessel shall ensure that the vessel complies with regulation 6.4 of Chapter XII of SOLAS.

(3)The authorized representative of a Safety Convention vessel of 150 m or more in length that has a single-side skin construction, was constructed on or after July 1, 1996 but before July 1, 1999 and is carrying solid bulk cargo that has a density of 1 780 kg/m³ or more shall ensure that the vessel complies with regulation 7.1 of Chapter XII of SOLAS.

(4)The authorized representative of a Safety Convention vessel shall ensure that the requirement of regulation 8.3 of Chapter XII of SOLAS is met.

(5)The authorized representative of a vessel of 150 m or more in length shall ensure that the vessel complies with regulation 11.1 of Chapter XII of SOLAS.

(6)Subsection (5) does not apply before January 1, 2013 in respect of a Canadian vessel that is not a Safety Convention vessel if it has on board a loading guidance manual that the Minister has determined adapts the principles for safe loading and unloading procedures set out in sections 4 to 6 of the BLU Code to apply in respect of the vessel.

(7)The authorized representative of a vessel of less than 150 m in length that was constructed on or after July 1, 2006 shall ensure that the vessel complies with regulation 11.3 of Chapter XII of SOLAS.

(8)The authorized representative of a Safety Convention vessel of 150 m or more in length that has a single-side skin construction and is carrying solid bulk cargo that has a density of 1 780 kg/m³ or more shall ensure that the vessel complies with regulation 14 of Chapter XII of SOLAS, unless that regulation does not apply in respect of the vessel.

Dangerous Goods

Chapters VI and VII of SOLAS and the IMSBC Code

110 #

(1)The master of a vessel shall ensure that the requirements of regulations 7-2, 7-3 and 7-4.1 of Chapter VII of SOLAS are met.

(2)Every company shall ensure that the requirements of regulation 7-4.2 of Chapter VII of SOLAS are met in respect of its vessels.

(3)Every person on or in the vicinity of a vessel that is carrying dangerous goods or onto or from which dangerous goods are being loaded or unloaded shall take the measures specified in respect of those goods in the IMSBC Code with respect to the activities in which they are engaged.

(4)The master of a tug who takes charge of an unoccupied barge carrying dangerous goods shall, before commencing any voyage,

(a)ensure, to the extent that it is feasible, that the goods are carried in accordance with Part B of Chapter VI of SOLAS, regulations 7-2, 7-3 and 7-4.1 of Chapter VII of SOLAS and the IMSBC Code; and

(b)be in possession of the documents required by section 115 in respect of those goods.

General Precautions

111 #

(1)Every person on a vessel who enters either a cargo space containing dangerous goods or a space adjacent to that cargo space shall

(a)comply with the requirements of the IMSBC Code regarding wearing self-contained breathing apparatus;

(b)be aware of the potential dangers in entering the space that are described in the IMSBC Code; and

(c)be under the supervision of a vessel’s officer designated by the master.

(2)If dangerous goods are to be loaded onto or unloaded from a vessel, its master shall ensure that an officer of the vessel or a person designated by its authorized representative is present while the goods are loaded or unloaded and while the cargo spaces are open.

(3)The master of a vessel carrying dangerous goods shall determine the areas on the vessel where smoking or using naked lights or spark-producing equipment could create a fire or explosion hazard and display warning notices in conspicuous places on board the vessel prohibiting the activity in those areas.

(4)Before dangerous goods are loaded into a cargo space, the master shall ensure that

(a)the space is cleaned of all loose debris, dunnage and oil residue and is dry; and

(b)the bilges in the space are substantially dry and free from extraneous material and can allow water outside the bilges to drain to the bilge sections while preventing the cargo from entering the bilges.

Incompatible Goods

112 #

(1)No person shall simultaneously load or unload

(a)incompatible dangerous goods; or

(b)dangerous goods and other goods that are incompatible with them.

(2)The person in charge of loading incompatible dangerous goods shall, after stowing the goods in a cargo space, close its hatch and clear the deck of all residue before stowing any other goods.

(3)The person in charge of loading dangerous goods and other goods that are incompatible with them shall, after stowing the goods in a cargo space, close its hatch and clear the deck of all residue before stowing any other goods.

(4)If the unloading of incompatible dangerous goods is interrupted while some of the goods are in a cargo space, the person in charge of unloading shall close its hatch and clear the deck of all residue until unloading is resumed.

(5)If the unloading of dangerous goods and other goods that are incompatible with them is interrupted while some of the goods are in a cargo space, the person in charge of unloading shall close its hatch and clear the deck of all residue until unloading is resumed.

(6)The person in charge of loading incompatible dangerous goods shall ensure that they are segregated in accordance with the IMSBC Code.

Dangerous Goods and Packaged Goods

113 #

If dangerous goods are to be carried with packaged goods, the person in charge of loading the goods shall ensure that they are segregated in accordance with the IMSBC Code.^note

Ammonium Nitrate and Ammonium Nitrate Based Fertilizer

114 #

(1)No person shall load or unload

(a)ammonium nitrate; or

(b)more than 10 000 tonnes of ammonium nitrate based fertilizer.

(2)At least 24 hours before 150 tonnes or more of ammonium nitrate based fertilizer are to be loaded onto or unloaded from a vessel, its master shall notify the following of the intention to load or unload and the location where it will take place:

(a)the Department of Transport Marine Safety Office nearest to that location; and

(b)the harbour master at the port or, if there is no harbour master, the person responsible for the port.

(3)The notification shall confirm that the fertilizer is considered to be free from the hazard of self-sustaining decomposition when tested in accordance with section 4 of Appendix 2 to the IMSBC Code.

(4)The harbour master at the port or, if there is no harbour master, the person responsible for the port at the location where loading or unloading ammonium nitrate based fertilizer will take place shall ensure that information in respect of fire prevention, emergency procedures, storage, cleanliness and separation from contaminants and other dangerous goods is available at the location.

^note

Documentation

115 #

(1)Every shipper of solid bulk cargo to be loaded onto a vessel in Canadian waters shall comply with

(a)regulation 2 of Chapter VI and regulation 10 of Chapter XII of SOLAS;

(b)section 4 of the IMSBC Code; and

(c)the provisions, if any, with respect to that cargo that are set out in a schedule to Appendix 1 to the IMSBC Code and that apply to the shipper.

(2)If the shipper does not provide a vessel’s master with the documents required to comply with subsection (1), the vessel’s authorized representative and its master shall refuse to carry the cargo.

(3)While solid bulk cargo is carried on a vessel, the vessel’s master shall keep on board

(a)the documents required to comply with the provisions referred to in paragraphs (1)(a) to (c);

(b)the IMSBC Code; and

(c)if the cargo is dangerous goods, the most recent version of the Medical First Aid Guide for Use in Accidents Involving Dangerous Goods (MFAG), published by the IMO.

(4)Despite subsection (3), if the cargo is carried on an unoccupied vessel that is under tow, the master of the towing vessel shall keep the documents on board the towing vessel.

(5)If the cargo is carried on an unoccupied vessel that is not under tow, the person in charge of the unoccupied vessel shall ensure that the documents are kept on it in a manner that will keep them clean and dry and readily accessible for inspection.

(6)The master of a vessel carrying solid bulk cargo other than dangerous goods shall keep on board a document, such as a detailed stowage plan, that lists the cargo by its bulk cargo shipping name and sets out its location.

115.1 #

(1)For the purpose of complying with paragraph 115(1)(b) and section 4.3.3 of the IMSBC Code, a shipper shall,

(a)before implementing their procedures for sampling, testing and controlling the moisture content of cargo, request that the Minister perform an initial verification of these procedures;

(b)before the first anniversary date of the most recent letter of approval issued under paragraph (4)(a), request that the Minister perform an intermediate verification of the procedures for which the letter of approval was issued; and

(c)before the expiry date of the most recent letter of approval issued under paragraph (4)(a) or (c), request that the Minister perform a renewal verification of the procedures for which the letter of approval was issued.

(2)If a shipper modifies the procedures for which a letter of approval has been issued under paragraph (4)(a) or (c), the shipper shall, before implementing the modified procedures, request that the Minister perform an initial verification of these procedures.

(3)On request by a shipper, the Minister shall perform the requested verification.

(4)The Minister shall

(a)issue a letter of approval to a shipper if, following an initial verification, the Minister is satisfied that the shipper’s procedures comply with the applicable provisions of the IMSBC Code;

(b)endorse a letter of approval issued under paragraph (a) if, following an intermediate verification, the Minister is satisfied that the procedures for which the letter of approval was issued are being properly implemented by the shipper; or

(c)issue a letter of approval to a shipper if, following a renewal verification, the Minister is satisfied that the shipper’s procedures comply with the applicable provisions of the IMSBC Code in force at the time of the renewal verification and are being properly implemented by the shipper.

^note

Inspection at the Request of an Interested Person

116 #

(1)A marine safety inspector authorized by the Minister under subsection 11(2) of the Act to carry out inspections to ensure compliance with sections 110 to 115 shall carry out an inspection of a vessel on which dangerous goods are loaded, carried or unloaded to ensure compliance with sections 110 to 115 if an interested person makes a request to the Department of Transport Marine Safety Office nearest to the vessel.

(2)The inspector shall provide a signed statement to the vessel’s master and the interested person

(a)specifying the name, registration number, port of registry and gross tonnage of the vessel;

(b)specifying the date of the inspection; and

(c)stating the results of the inspection.

(3)[Repealed, SOR/2021-59, s. 21] (repealed)

(4)[Repealed, SOR/2021-59, s. 21] (repealed)

(5)[Repealed, SOR/2021-59, s. 21] (repealed)

Additions to and Derogations from the IMSBC Code

117 #

(1)If a self-unloading vessel that loads or unloads coal at a Canadian port does not have electrical cables and components situated in spaces adjacent to cargo spaces that are safe for use in hazardous zones, the vessel’s master shall ensure that

(a)means are provided for positive isolations;

(b)the electrical cables and components in those spaces have a minimum of Class II, Division 2, Group F rating, in accordance with Part I of the Canadian Electrical Code;

(c)a mechanical ventilation system is operating in unloading tunnels and loopbelt tunnels and any other transfer equipment and, if an exhaust fan is part of the system, it is certified by its manufacturer as safe for use in an explosive atmosphere; and

(d)the operational procedures for the mechanical ventilation system in an explosive atmosphere are documented and in place.

(2)Instead of ensuring compliance with the requirement in the COAL schedule to Appendix 1 to the IMSBC Code that holds be surface-ventilated for the first 24 hours after departure from the loading port, the master of a self-unloading vessel that loads coal at a Canadian port before or during an inland voyage may ensure that the holds are ventilated by other methods that reduce methane concentration and that the spaces adjacent to the cargo spaces are ventilated before electrical power sources are activated.

(3)The master of a self-unloading vessel that loads or unloads coal at a Canadian port before, during or after an inland voyage need not ensure that supply-ventilation equipment for tunnels is safe for use in an explosive atmosphere.

(4)If the carbon monoxide level in a cargo space increases steadily or exceeds 50 ppm, the master of a self-unloading vessel that loads or unloads coal at a Canadian port before, during or after an inland voyage may meet the requirements of subsection (5) instead of

(a)ensuring that the cargo space is completely closed down and all ventilation ceased;

(b)seeking expert advice immediately; and

(c)notifying the vessel’s owners.

(5)The requirements referred to in subsection (4) are the following:

(a)to ensure that readings of the carbon monoxide level and the lower explosion limit are taken at least every 4 hours in the first 24 hours of sailing and after that at least

(i)once per day if the carbon monoxide levels are less than 50 ppm,

(ii)twice per day if the carbon monoxide levels are 50 ppm or more but less than 500 ppm, and

(iii)once every 4 hours if the carbon monoxide levels are 500 ppm or more; and

(b)to notify the vessel’s owners and the Department of Transport Marine Safety Office nearest to the vessel if both the carbon monoxide level and the lower explosion limit are simultaneously increasing.

Concentrates

Trimming and Levelling

118 #

The master of a vessel that is departing from a Canadian port and is loaded in a hold with iron ore concentrates or sulphide concentrates of lead, copper or zinc for export to a place that is not within the limits of an inland voyage shall ensure that the concentrates are trimmed and levelled so that

(a)they reach all boundaries of the hold;

(b)they slope uniformly from the hatch boundaries to the bulkheads;

(c)no shearing faces remain to collapse during the voyage;

(d)in the case of iron ore concentrates, the height differences between the peaks and troughs in the square of the hatch of the hold do not exceed 5% of the vessel’s breadth; and

(e)in the case of sulphide concentrates, the height differences between the peaks and troughs do not exceed 5% of the vessel’s breadth in the athwartship direction for the full width of the hold.

Certificates of Readiness to Load

119 #

(1)This section applies in respect of vessels that load concentrates for export to a place that is not within the limits of an inland voyage.

(2)No vessel in Canadian waters shall load concentrates except in accordance with a Certificate of Readiness to Load issued to the vessel by the Minister or, in the case of a vessel in the Port of Quebec, by the Port Warden of the Harbor of Quebec.

(3)On application, the Minister shall issue a Certificate of Readiness to Load to a vessel if

(a)the requirements of regulations 2, 6, 7.2 and 7.3 of Chapter VI of SOLAS are met;

(b)the requirements of the IMSBC Code that apply before loading are met;

(c)the documents referred to in subsection 115(3) are on board;

(d)the vessel’s master is familiar with the hazards that can occur as a result of concentrate oxidation; and

(e)the vessel is in fit condition to carry concentrates in the holds in which they are to be loaded.

(4)The Minister may, for the purpose of ensuring compliance with sections 108, 109, 115 and 118, specify the following terms and conditions in a Certificate of Readiness to Load:

(a)the type of concentrates that may be loaded;

(b)the holds into which the concentrates may be loaded;

(c)the manner in which the concentrates are to be distributed so as not to overstress the vessel’s structure under standard loading conditions;

(d)the stowage factor used in the stability calculation for the concentrates; and

(e)the trimming and levelling required.

(5)If the Minister inspects a vessel for the purpose of establishing whether the requirements for the issuance of a Certificate of Readiness to Load have been met and establishes that some requirements have not been met, he or she shall give the master a written statement setting out those requirements.

^note

Fitness to Proceed Certificates

120 #

(1)No vessel that is carrying concentrates for export to a place that is not within the limits of an inland voyage shall depart from a Canadian port unless it holds a Fitness to Proceed Certificate issued under subsection (2).

(2)On application, the Minister shall issue a Fitness to Proceed Certificate to a vessel loaded with concentrates if

(a)the requirements of regulations 2, 6, 7.2 and 7.3 of Chapter VI of SOLAS and the requirements of the IMSBC Code are met;

(b)if a Certificate of Readiness to Load was issued under subsection 119(3), the vessel was loaded in accordance with the Certificate; and

(c)the vessel is fit to proceed to sea.

Division 3 — Grain Cargo

Interpretation

121 #

(1)The following definitions apply in this Division.

grain means wheat, corn, oats, rye, barley, rice, pulses and other seeds and the processed form of seeds whose behaviour is similar to that of seeds in their natural state. (grain)

(2)For the purposes of this Division, the reference in A4 of the International Grain Code to “an equivalent accepted by the Administration in accordance with regulation I/5 of the International Convention for the Safety of Life at Sea, 1974, as amended” shall, in respect of Canadian vessels, be read as a reference to “a replacement granted by the Marine Technical Review Board under section 28 of the Canada Shipping Act, 2001 or an equivalent accepted by that Board under section 102 of the Cargo, Fumigation and Tackle Regulations”.

Application

122 #

This Division applies in respect of

(a)Canadian vessels that are loading or carrying grain in bulk and are engaged or about to engage on a voyage other than an inland voyage, a sheltered waters voyage or a near coastal voyage, Class 2;

(b)vessels in Canadian waters that are loading or carrying grain in bulk that is for export to a place that is not within the limits of an inland voyage; and

(c)foreign vessels in Canadian waters that are carrying grain in bulk and are engaged or about to engage on a voyage other than an inland voyage.

Chapter VI of SOLAS and the International Grain Code

123 #

(1)Subject to section 125, the master of a vessel shall ensure that the requirements of regulation 3.1 of Chapter VI of SOLAS and the requirements of the International Grain Code are met.

(2)Every shipper of grain to be loaded onto a vessel in Canadian waters shall comply with regulation 2 of Chapter VI of SOLAS.

Grain Loading Manuals and Documents of Authorization

124 #

(1)On application, the Minister shall approve a Canadian vessel’s grain loading manual if

(a)it includes the information referred to in sections 6.2 and 6.3 of the International Grain Code and that information can be used to ensure that the vessel meets the requirements of the Code; and

(b)it is in English or French.

(2)On application, the Minister shall issue a document of authorization to a Canadian vessel if the vessel’s grain loading manual has been approved under subsection (1).

Alternative Requirements for Vessels in Certain Waters

125 #

(1)The master of a vessel may ensure that the requirements of subsection (2) are met in lieu of the requirements of sections 7 to 9 of the International Grain Code while the vessel is in the following waters and is proceeding to a port in those waters:

(a)the Great Lakes and the St. Lawrence River as far seaward as a straight line drawn from Cap-des-Rosiers to West Point, Anticosti Island and from Anticosti Island to the north shore of the St. Lawrence River along the meridian of longitude 63° W; or

(b)the waters bounded by the coast of the Province of British Columbia and the State of Washington and lying between a straight line drawn along the parallel of latitude 50° N from Vancouver Island to the Canadian mainland and a straight line drawn north from Cape Flattery to Vancouver Island.

(2)The requirements referred to in subsection (1) are the following:

(a)the longitudinal strength of the vessel is not impaired;

(b)any restrictions on load conditions and regarding local stress set out in the vessel’s stability documents are met;

(c)the forecast of the weather to be encountered on the voyage, provided by the appropriate national marine weather services, is checked and the vessel does not proceed when unusually adverse weather conditions are forecast;

(d)as many holds as possible are filled;

(e)upsetting moments are reduced to a minimum;

(f)all partly filled holds are trimmed level in the athwartship direction; and

(g)throughout the voyage, the initial metacentric height of the vessel exceeds, after correction for the free surface effects of liquids in tanks, each of the values determined by the following formulae:

(i)(upsetting moment × 3.73) / displacement, and

(ii)(upsetting moment × beam) / (displacement × freeboard).

(3)For the purpose of paragraph (2)(d), a hold with a saucer is considered to be filled if it is temporarily secured by lining it with one layer of bagged grain or with other cargo that is tightly stowed and exerts at least the same pressure as a layer of bagged grain.

(4)For the purpose of paragraph (2)(g), the upsetting moment for unsecured holds with no centreline division is the value obtained by the formula (0.0177 × L x B³) / SF and the upsetting moment for unsecured holds with a centreline division is the value obtained by the formula (0.0044 × L × B³) / SF

Chapter XII of SOLAS

126 #

(1)The master of a Safety Convention vessel shall ensure that the vessel meets the requirements of regulation 6.4 of Chapter XII of SOLAS.

(2)The authorized representative of a vessel of 150 m or more in length shall ensure that the vessel meets the requirements of regulation 11.1 of Chapter XII of SOLAS.

(3)Subsection (2) does not apply before January 1, 2013 in respect of a Canadian vessel that is not a Safety Convention vessel if it has on board a loading guidance manual that the Minister has determined adapts the principles for safe loading and unloading procedures set out in sections 4 to 6 of the BLU Code to apply in respect of the vessel.

(4)The authorized representative of a vessel of less than 150 m in length that was constructed on or after July 1, 2006 shall ensure that the vessel meets the requirements of regulation 11.3 of Chapter XII of SOLAS.

Additional Requirements for a Particular Type of Vessel Before Loading

127 #

(1)The master of a vessel designed to carry liquid bulk cargoes shall ensure that grain is not loaded onto the vessel unless

(a)in each hold, the stripping line suction or one of the main cargo line suctions is enclosed by a box that is

(i)constructed of lumber that is at least 64 mm × 64 mm or another material that is at least as strong,

(ii)large enough to enclose a volume of at least 0.6 m³, and

(iii)fitted with drainage arrangements that are designed so that

(A)water outside the box drains towards the suction while grain is prevented from entering the box after the cargo is loaded, and

(B)if they have holes or spaces, the total area of the holes or spaces is at least six times the cross-sectional area of the suction pipe;

(b)each hold is fitted with

(i)a permanent undamaged sounding pipe that

(A)is fitted with a cap in good working order,

(B)is grain-tight,

(C)has an opening only at its upper and lower extremities, and

(D)extends from above the main deck level to a level not more than 75 mm above the vessel’s bottom plating, or

(ii)a temporary sounding pipe that

(A)is constructed of semi-rigid plastic tubing or another material that is similar in strength and flexibility,

(B)has an internal diameter of at least 38 mm, and

(C)meets the requirements of clauses (i)(A) to (D);

(c)all heating coils for the holds are cooled and drained of water and their valves secured closed by means of wire lashings;

(d)all main-deck pipeline valves are secured closed by means of wire lashings; and

(e)all sea valves for the holds are closed by inserting blanks adjacent to the valves or by securing the valves with chain lashings and padlocks.

(2)The master shall ensure that grain is not loaded onto a vessel, other than one designed to carry liquid bulk cargoes, unless the bilges in every hold are free of extraneous material and can allow water outside the bilges to drain to the bilge suctions while preventing grain from entering the bilges.

^note

Certificates of Readiness to Load

128 #

(1)No vessel in Canadian waters shall load grain except in accordance with a Certificate of Readiness to Load issued to the vessel by the Minister or, in the case of a vessel in the Port of Quebec, by the Port Warden of the Harbor of Quebec.

(2)On application, the Minister shall issue a Certificate of Readiness to Load to a vessel if

(a)the applicable requirements of sections 123 and 125 to 127 are met;

(b)the documents required by regulations 2 and 7.2 of Chapter VI of SOLAS and section 3.1 of the International Grain Code are on board;

(c)the proposed loading would meet any restrictions on load conditions and regarding local stress set out in the vessel’s stability documents;

(d)the vessel is in fit condition to carry grain in the holds in which it is to be loaded; and

(e)the Minister has

(i)received written approval for loading under paragraph 58(2)(a) of the Plant Protection Regulations, or

(ii)been advised under paragraph 58(2)(b) of the Plant Protection Regulations that inspection and approval of the vessel are not required.

(3)The Minister may, for the purpose of ensuring compliance with sections 123 and 125 to 127, specify the following terms and conditions in a Certificate of Readiness to Load:

(a)the type of grain that may be loaded;

(b)the holds into which the grain may be loaded;

(c)the stowage factor used in the stability calculation for the grain; and

(d)the trimming and levelling required.

(4)If the Minister inspects a vessel for the purpose of establishing whether the requirements for the issuance of a Certificate of Readiness to Load have been met and establishes that some requirements have not been met, he or she shall give the vessel’s master a written statement setting out those requirements.

Fitness to Proceed Certificates

129 #

(1)No vessel that is carrying grain for export to a place that is not within the limits of an inland voyage shall depart from a Canadian port unless it holds a Fitness to Proceed Certificate issued under subsection (2).

(2)On application, the Minister shall issue a Fitness to Proceed Certificate to a vessel loaded with grain if

(a)the applicable requirements of sections 123 and 125 to 127 are met;

(b)if a Certificate of Readiness to Load was issued under subsection 128(2), the vessel was loaded in accordance with the Certificate; and

(c)the vessel is fit to proceed to sea.

^note

Division 4 — Timber Deck Cargo

Interpretation

130 #

The following definitions apply in this Division.

timber includes sawn wood or lumber, cants, logs, poles and pulpwood. It does not include wood pulp or similar cargo. (bois)

Timber Code means the Code of Safe Practice for Ships Carrying Timber Cargoes, 1991, published by the IMO. (Recueil de bois en pontée)

Application

131 #

This Division applies in respect of vessels that are 24 m or more in overall length and are loading or carrying timber on an uncovered part of a freeboard or superstructure deck for export or import.

Stability

132 #

(1)The master of a vessel shall ensure that the curve of minimum operational metacentric height versus draught described in regulation 25-8.1.1 of Chapter II-1 of SOLAS is not exceeded if the vessel

(a)is 100 m or more in subdivision length and was constructed on or after February 1, 1992; or

(b)is 80 m or more but less than 100 m in subdivision length and was constructed on or after July 1, 1998.

(2)The master of a vessel that is less than 80 m in subdivision length shall ensure that the requirements of Appendix C to the Timber Code are met.

(3)In this section, “subdivision length” has the same meaning as in regulation 25-2 of Chapter II-1 of SOLAS.

^note

Timber Code

General

133 #

The master of a vessel shall ensure that the requirements of chapters 2 to 6 of the Timber Code, and Appendices A and B to the Code, are met.

Uprights

134 #

For the purpose of 4.2.1 of the Timber Code, uprights shall be fitted on a vessel that is within a seasonal winter load line zone and is loaded in a Canadian port within the period during which the winter load line is applicable if

(a)the maximum height of the cargo above the weather deck exceeds 2.44 m; or

(b)the maximum height of the cargo above the hatch cover exceeds 2.44 m or there are more than two tiers of bundles of lumber above the hatch cover.

Lashings and Components

135 #

(1)For the purpose of 4.5.1 of the Timber Code, all lashings used for the securing of timber shall be tested by a competent person to determine whether they

(a)meet the requirements of 4.1.2 of the Code;

(b)in the case of chains, have a link weld capable of a 90° cold bend without separation; and

(c)in the case of flexible steel wire ropes, are at least 16 mm in diameter.

(2)For the purpose of 4.5.1 of the Timber Code, all components used for the securing of timber shall be tested by a competent person to determine whether they

(a)meet the requirements of 4.1.2.2 and 4.1.2.3 of the Code; and

(b)have a breaking strength of at least 14 100 kg.

(3)For the purpose of 4.5.1 of the Timber Code, if lashings or components meet the requirements referred to in subsection (1) or (2), as the case may be, the competent person shall

(a)mark each of them in a distinctive manner that indicates the month and year of testing; and

(b)sign and issue a certificate that sets out

(i)the distinguishing mark,

(ii)a description of the lashings or components,

(iii)the date of testing,

(iv)the number of similar lashings or components tested on that date,

(v)the proof load,

(vi)the original breaking strength,

(vii)their name and

(A)if they are an employee, the name and address of their employer, or

(B)if they are not an employee, their address, and

(viii)the qualifications that qualify them as a competent person.

(4)For the purpose of 4.5.1 of the Timber Code,

(a)the lashings and components in respect of which a certificate is issued under paragraph (3)(b) shall be re-tested by a competent person at least once every four years after the day on which the certificate is issued to determine whether or not they exhibit permanent deformation after having been subjected to a proof load of at least 40% of their original breaking strength; and

(b)if the lashings or components do not exhibit permanent deformation in the test, the competent person may sign and issue a certificate that sets out the information specified in paragraph (3)(b).

(5)For the purpose of 4.5.1 of the Timber Code, if, when a visual examination under 4.5.3 of the Timber Code or section 138 is made, the diameter of a section of a lashing or component appears to be reduced by 5% or more from its original diameter, any certificate issued in respect of the lashing or component is invalid unless

(a)if the reduction is 10% or less, the lashing or component is re-tested by a competent person subjecting it to a proof load of at least 40% of its original breaking strength and it does not exhibit permanent deformation; or

(b)if the reduction is more than 10%, a representative sample of the lashing or component, or of another lashing or component in respect of which the same certificate applies and that has a similar reduction in a section of its diameter, is tested by a competent person to destruction and has a breaking strength of at least 133 kN.

(6)For the purpose of 4.5.1 of the Timber Code, if, when a visual examination under 4.5.3 of the Timber Code or section 138 is made, the cross-sectional area of a section of a lashing or component appears to be reduced by 10% or more from its original area, any certificate issued in respect of the lashing or component is invalid unless

(a)if the reduction is 20% or less, the lashing or component is re-tested by a competent person subjecting it to a proof load of at least 40% of its original breaking strength and it does not exhibit permanent deformation; or

(b)if the reduction is more than 20%, a representative sample of the lashing or component, or of another lashing or component in respect of which the same certificate applies and that has a similar reduction in a section of its cross-sectional area, is tested by a competent person to destruction and has a breaking strength of at least 133 kN.

(7)For the purpose of 4.5.1 of the Timber Code, any certificate issued in respect of a web lashing is invalid if when a visual examination under 4.5.3 of the Timber Code or section 138 is made it appears that

(a)the length of an edge cut exceeds the lashing’s thickness;

(b)the depth of an abrasion is more than 15% of the lashing’s thickness, taken as a proportion of all plies;

(c)the total depth of abrasions on both sides of the lashing is more than 15% of the lashing’s thickness, taken as a proportion of all plies;

(d)the depth of the warp thread damage is 50% or less of the lashing’s thickness and the damage

(i)is within 25% of the width of the lashing from its edge, or

(ii)is over an area that is more than 25% of the lashing’s width;

(e)the depth of the warp thread damage is more than 50% of the lashing’s thickness and the damage

(i)is within 25% of the width of the lashing from its edge, or

(ii)is over an area that is more than 12.5% of the lashing’s width;

(f)weft thread damage allows warp threads to separate over an area that is wider than 25% of the lashing’s width and longer than twice its width;

(g)any part of the lashing is melted, charred or damaged by chemicals;

(h)load-bearing stitches are broken or worn; or

(i)the web-lashing is damaged in such a way that the total effect of the damage on the lashing is approximately the same as the effect of any of the types of damage referred to in paragraphs (a) to (h).

(8)In this section, competent person means a professional engineer or a person with similar qualifications.

Personnel Protection and Safety Devices

136 #

(1)The English version of 5.1 of the Timber Code shall be read without reference to “and workers”.

(2)Compliance with the requirements of 5.3 of the Timber Code is required only on the completion of loading and securing.

Stowing Athwartships

137 #

Despite 2.8 of Appendix A to the Timber Code, athwartship packages may be laid in two adjacent tiers in the deck stow above the level of the hatches if they

(a)are overstowed by at least two layers of packages in the fore and aft direction;

(b)are separated from any other athwartship layers in the deck stow by at least one layer of packages in the fore and aft direction; and

(c)are not wrapped in any material that would facilitate movement of the tiers.

Lashings and Components — Other Requirements

138 #

(1)The master of a vessel shall ensure that lashings and components are visually examined before timber is loaded.

(2)The master shall ensure that lashings are 13 mm or more in diameter in the case of chains and 16 mm or more in diameter in the case of wire rope.

Wrappings and Coverings

139 #

(1)The master of a vessel shall ensure that

(a)there are no wrapped bundles of lumber on the outside or next to the outside of the upper tier unless the wrapping has a non-skid surface; and

(b)any wrapped bundles of lumber with uneven lengths are marked distinctively.

(2)Unless a vessel’s Cargo Securing Manual sets out requirements with respect to the use of coverings, such as tarpaulins, on timber, if timber is covered the vessel’s master shall ensure that

(a)the covering is secured to withstand the intended voyage;

(b)if there is more than one tier of timber, bundles of timber on the top tier are tightly packed so as to provide as continuous a surface as possible for the covering to rest on; and

(c)any gaps between bundles are filled in or marked.

^note

Certificates of Readiness to Load

140 #

(1)This section applies in respect of vessels in Canadian waters that load timber for export to a place that is not within the limits of an inland voyage.

(2)No vessel in Canadian waters shall load timber except in accordance with a Certificate of Readiness to Load issued to the vessel by the Minister or, in the case of a vessel in the Port of Quebec, by the Port Warden of the Harbor of Quebec.

(3)On application, the Minister shall issue a Certificate of Readiness to Load to a vessel if

(a)the applicable requirements of sections 132 to 139 are met;

(b)the Timber Code is on board the vessel; and

(c)the vessel is in fit condition to carry timber on the uncovered part of the freeboard or superstructure deck on which the timber is to be loaded.

(4)The Minister may, for the purpose of ensuring compliance with sections 132 to 139, specify the following terms and conditions in a Certificate of Readiness to Load:

(a)the type of timber that may be loaded;

(b)the freeboard or superstructure deck on which the timber may be loaded;

(c)the manner in which the timber is to be distributed;

(d)the ballast that is to be used; and

(e)the uprights that are required.

(5)If the Minister inspects a vessel for the purpose of establishing whether the requirements for the issuance of a Certificate of Readiness to Load have been met and establishes that some requirements have not been met, he or she shall give the vessel’s master a written statement setting out those requirements.

Fitness to Proceed Certificates

141 #

(1)No vessel that is carrying timber for export to a place that is not within the limits of an inland voyage shall depart from a Canadian port unless it holds a Fitness to Proceed Certificate issued under subsection (2).

(2)On application, the Minister shall issue a Fitness to Proceed Certificate to a vessel loaded with timber if

(a)the applicable requirements of sections 132 to 139 are met;

(b)if a Certificate of Readiness to Load was issued under subsection 140(3), the vessel was loaded in accordance with the Certificate; and

(c)the vessel is fit to proceed to sea.

^note

Division 5 — Packaged Goods

Interpretation

142 #

The following definitions apply in this Division.

compatible, in respect of goods, means able to be stowed together without creating undue hazards in case of leakage, spillage or other accidents. (compatible)

INF cargo means packaged goods that are irradiated nuclear fuel, plutonium or high-level radioactive wastes carried as cargo in accordance with Class 7 of the IMDG Code. (cargaison INF)

INF Code means the International Code for the Safe Carriage of Packaged Irradiated Nuclear Fuel, Plutonium and High-Level Radioactive Wastes on Board Ships, published by the IMO. (Recueil INF)

military explosives means explosives that are under the control of

(a)the Minister of National Defence;

(b)the military establishment of a member country of the North Atlantic Treaty Organization; or

(c)the military establishment of another country under an agreement with the Department of National Defence. (explosifs militaires)

net explosives quantity means the net mass of explosives but does not include the mass of the means of containment. (quantité nette d’explosifs)

passenger vessel means a vessel that is carrying at least

(a)the greater of 25 passengers and 1 passenger for each 3 m of overall length of the vessel, if the vessel is carrying dangerous goods other than explosives; and

(b)the lesser of 13 passengers and 1 passenger for each 3 m of overall length of the vessel, if the vessel is carrying explosives. (bâtiment à passagers)

Application

143 #

(1)This Division does not apply in respect of a cargo transport unit carried on a short-run ferry if

(a)the unit is stowed at either end of the ferry and is separated from all other cargo transport units and all vehicles by a distance of at least 1 m;

(b)smoking and the use of naked lights or spark-producing equipment are prohibited in the vicinity of the unit, and approaching the unit is prohibited; and

(c)any parking brakes that are fitted on the unit are securely set.

(2)This Division does not apply in respect of dangerous goods carried in bulk or ships’ stores and equipment.

^note

Packaging

144 #

(1)If the IMDG Code requires that dangerous goods be packaged for transportation by a vessel, no person shall carry those goods unless they are packaged in a form of containment specified by the IMDG Code for those goods.

(2)If the IMDG Code does not require that dangerous goods be packaged for transportation by a vessel but they are packaged, no person shall carry those goods unless the packaging is a form of containment specified by the IMDG Code for those goods.

Packing

145 #

(1)Every person who packs dangerous goods in a cargo transport unit shall pack and secure them in a manner that meets the standards set out in chapters 1 to 6 of the IMO/ILO/UN ECE Guidelines for Packing of Cargo Transport Units, published by the IMO, or other standards that the Minister determines provide a level of safety that is equivalent to or higher than that of those standards.

(2)Every person who packs dangerous goods in a cargo transport unit shall ensure that

(a)the unit is, immediately before stowing,

(i)clean, dry and apparently fit to receive the goods, and

(ii)free of irrelevant placards;

(b)packages that need to be segregated in accordance with the IMDG Code are so segregated, except as provided in subsection 146(4);

(c)all packages are externally inspected for damage and only dry, sound packages are packed;

(d)all drums are stowed in an upright position;

(e)all packages are properly stowed in the unit and adequately secured to restrain against movement;

(f)goods loaded in bulk are evenly distributed within the unit;

(g)if any of the goods are of Class 1 except for division 1.4, the unit is structurally serviceable as provided for in section 7.4.6 of the IMDG Code;

(h)a Dangerous Goods Declaration has been received for each dangerous goods consignment stowed in the unit;

(i)the unit’s doors or similar openings are closed and properly secured by a latch or other means;

(j)if the unit is temperature controlled, it has machinery and a power supply that are of a type unable to create a hazard for the goods and are in good working order; and

(k)if solid carbon dioxide is used for cooling purposes, the unit is externally marked or labelled in a conspicuous place with the words “DANGEROUS CO₂ (DRY ICE) INSIDE, VENTILATE THOROUGHLY BEFORE ENTERING” or “DANGER, CONTIENT DU CO₂ (NEIGE CARBONIQUE), AÉRER COMPLÈTEMENT AVANT D’ENTRER”.

Carriage of Packaged Goods

146 #

(1)Subject to sections 148 and 151, subsections 154(3), 157(3) and (4) and section 158, the master of a vessel shall ensure that the requirements of the following are met:

(a)the IMDG Code in respect of carrying packaged goods on the vessel;

(b)regulations 4.4, 4.5, 5 and 6.1 of Chapter VII of SOLAS; and

(c)chapters 2 to 11 of the INF Code, if the vessel carries INF Cargo.

(2)Every company shall ensure that the requirements of regulation 6.2 of Chapter VII of SOLAS are met in respect of its vessels.

(3)Every person who ships packaged goods by a vessel or consigns packaged goods to a vessel in a cargo transport unit that is not required to be marked by the Transportation of Dangerous Goods Regulations shall comply with any reasonable request that the vessel’s authorized representative or master makes in respect of the goods in order to comply with the requirements of the IMDG Code respecting stowage and segregation if the cargo transport unit

(a)is carried by vessel between two places in Canada; and

(b)is loaded with less than 500 kg of packaged goods.

(4)The “AWAY FROM” segregation requirement in the IMDG Code for incompatible dangerous goods that are carried in the same cargo transport unit does not apply if they

(a)are carried on

(i)a sheltered waters voyage, a near coastal voyage, Class 2 or an inland voyage, or

(ii)a voyage between two places in Canada during which the vessel is never more than 120 nautical miles from shore or 200 nautical miles from a place of refuge; and

(b)are separated by a minimum horizontal separation of 2 m, projected vertically.

Power to Refuse to Take Packaged Goods on Board

147 #

If a vessel’s authorized representative or master suspects that a means of containment contains dangerous goods and that the requirements of this Division have not been met in respect of those goods, the authorized representative or the master may take any reasonable steps necessary to determine if the suspicion is correct and, if it is, refuse to take the means of containment on board.

Cargo Securing Manual

148 #

(1)Compliance with the requirements of regulation 5 of Chapter VII of SOLAS is not required if

(a)the vessel is a Canadian vessel engaged on a sheltered waters voyage, a near coastal voyage, Class 2 or an inland voyage between Canadian ports; and

(b)all cargo on board the vessel is loaded, stowed and secured in a manner that ensures that, under normal conditions of transport, no means of containment for dangerous goods

(i)becomes damaged in a way that could lead to an accidental release of the dangerous goods, or

(ii)causes damage to other cargo that could lead to an accidental release of the dangerous goods.

(2)For the purposes of regulation 5 of Chapter VII of SOLAS, on application, the Minister shall approve a Cargo Securing Manual if it is drawn up to a standard at least equal to the standard set out in the Annex to Appendix 2 to the CSS Code.

(3)Unless subsection (1) applies, the master of a vessel shall keep on board the Cargo Securing Manual referred to in regulation 5 of Chapter VII of SOLAS.

INF Certificate

149 #

On application, the Minister shall issue a Certificate of Fitness for the Carriage of INF Cargo to a vessel that carries INF Cargo if the requirements of chapters 2 to 10 of the INF Code are met.

Precautions Respecting Wheeled Cargo Transport Units

150 #

(1)If inclement weather is forecast, the master of a vessel that is carrying a wheeled cargo transport unit that contains dangerous goods shall ensure that adequate means, having regard to the kind of weather forecast and the planned route of the voyage, are provided to restrain the wheeled cargo transport unit and any wheeled cargo transport units stowed in its immediate vicinity. The means shall include any one or any combination of the following:

(a)brakes that can be set;

(b)wheel stops;

(c)lashing down with securing devices that

(i)are described in Table 1 to section 4.2 of Annex 13 to the CSS Code,

(ii)are attached to the deck, and

(iii)are not used with a working load that exceeds the applicable percentages of the maximum securing load set out in that Table for the devices; and

(d)devices specifically designed for securing wheeled cargo transport units.

(2)If securing devices are used, the master shall ensure that the information required by section 2.1 or 2.2, as the case may be, of the Annex to Appendix 2 to the CSS Code is kept on board.

(3)Every person who secures a wheeled cargo transport unit that contains dangerous goods shall take into consideration

(a)movement between the body and the wheels of the unit due to the springing of the unit’s suspension;

(b)the centre of gravity of the unit in relation to both the wheel base and the wheel-to-ground contact area; and

(c)in the case of rail vehicles, the attachment of the body to the running gear.

Vehicles, Motor Boats and Other Conveyances Carried on a Vessel

151 #

(1)A passenger vessel that is engaged on a sheltered waters voyage, a near coastal voyage, Class 2 or an inland voyage may carry a motor vehicle, other than a recreational vehicle, that has fuel in its fuel tank or is carrying fuel outside the fuel tank to propel the vehicle if

(a)the vehicle is driven on and off the vessel;

(b)the fuel tank is not so full as to be likely to spill because of an increase in volume from temperature changes;

(c)the ignition is switched off; and

(d)the vehicle is carrying, outside the fuel tank, no more than 25 L of the fuel needed to propel it and the fuel is in a means of containment that

(i)is designed for the carriage of that type of fuel,

(ii)meets the requirements of the Transportation of Dangerous Goods Regulations for the means of containment,

(iii)is secured within the vehicle, and

(iv)if a gaseous fuel is carried, is equipped with valves protected by valve caps.

(2)A passenger vessel that is engaged on a sheltered waters voyage, a near coastal voyage, Class 2 or an inland voyage may carry a recreational vehicle or recreational trailer that is carrying cylinders of liquefied petroleum gas or propane if

(a)the vehicle or trailer is driven or towed on and off the vessel;

(b)when the vehicle or trailer carries cylinders of liquefied petroleum gas,

(i)it does not carry more than two cylinders with a total capacity not exceeding 65 L,

(ii)the gas is for domestic use,

(iii)each cylinder is secured to the vehicle or trailer, and

(iv)the valves of each cylinder are securely closed at all times while the vehicle or trailer is on the vessel;

(c)when the vehicle or trailer carries a portable barbecue,

(i)the barbecue is equipped with not more than one cylinder of propane with a capacity not exceeding 65 L, and

(ii)the valves on the cylinder are securely closed at all times while the vehicle or trailer is on the vessel; and

(d)in the case of the vehicle, it meets the requirements of paragraphs (1)(b) to (d).

(3)A passenger vessel that is engaged on a sheltered waters voyage, a near coastal voyage, Class 2 or an inland voyage may carry a trailer, including one carrying containers of gasoline, that is being used to carry a motorboat or a total of not more than two motorbikes, all-terrain vehicles, snowmobiles and personal watercraft that have gasoline in their fuel tanks or are carrying containers of gasoline outside their fuel tanks to propel them if

(a)the trailer is towed by or attached to a motor vehicle that is driven on and off the vessel;

(b)the fuel tanks are not so full as to be likely to spill because of an increase in volume from temperature changes; and

(c)not more than two containers of gasoline are being carried and each of them

(i)has a capacity not exceeding 25 L,

(ii)meets the requirements of the Transportation of Dangerous Goods Regulations for the means of containment, and

(iii)is secured on the trailer or in the other conveyance.

(4)A passenger vessel that is engaged on a sheltered waters voyage, a near coastal voyage, Class 2 or an inland voyage may carry a service repair vehicle that meets the requirements of subsection (1) and is carrying cylinders of propane, compressed oxygen or dissolved acetylene if

(a)not more than four service repair vehicles that are carrying any of those cylinders are carried at the same time;

(b)the vehicle is not carrying more than one cylinder of propane with a capacity not exceeding 65 L, one cylinder of compressed oxygen with a capacity not exceeding 50 L and one cylinder of dissolved acetylene with a capacity not exceeding 75 L;

(c)the cylinders

(i)are secured to the vehicle in an upright position by permanently installed fittings, and

(ii)have their valves securely closed and protected by a screw-on metal cap;

(d)the vehicle is stowed at either end of the vehicle deck and access to the place where it is stowed is restricted by means of barriers or signs;

(e)when the vessel has a mechanical ventilation system for the vehicle deck, it is operating while the vehicle is stowed on board;

(f)the vessel’s master ensures that a continuous watch is maintained on the vehicle deck to monitor all service vehicles;

(g)the vehicle is stowed so that it is always accessible in case of fire;

(h)on closed-deck ferries, a minimum distance of 12 m is maintained athwartships between service vehicles; and

(i)on open-deck ferries, the maximum distance feasible but in any case at least 6 m is maintained athwartships between service vehicles.

(5)A passenger vessel that is engaged on a sheltered waters voyage, a near coastal voyage, Class 2 or an inland voyage may carry a motor vehicle that meets the requirements of subsection (1) and is carrying a cylinder of refrigerated liquid oxygen if

(a)before the vehicle is loaded, the vessel’s master is provided with a copy of any emergency response instructions contained in the dangerous goods shipping documents or prepared by the shipper;

(b)the cylinder

(i)has a capacity not exceeding 450 L, and

(ii)is secured to the vehicle in an upright position by permanently installed fittings;

(c)not more than one vehicle that is carrying a cylinder of refrigerated liquid oxygen is carried at the same time;

(d)the vehicle is stowed at one end of the vehicle deck and access to the place where it is stowed is restricted by means of barriers or signs;

(e)the vehicle is not stowed within 3 m of other motorized conveyances that have fuel in their fuel tanks;

(f)if the vessel has a mechanical ventilation system for the vehicle deck, it is operating while the vehicle is stowed on board;

(g)subject to paragraph (i), if the vehicle is stowed on a closed vehicle deck, or a partially closed vehicle deck not fitted with overhead deluge sprinklers,

(i)the vessel has a mechanical ventilation system for the deck, and

(ii)no other dangerous goods are carried on the same deck;

(h)subject to paragraph (i), if the vehicle is stowed on a partially closed vehicle deck fitted with an overhead deluge sprinkler system,

(i)the refrigerated liquid oxygen is deemed to have a 5.1 subsidiary risk classification for the purpose of determining the segregation requirements under the IMDG Code,

(ii)only dangerous goods that require not more than “AWAY FROM” segregation are carried on the same deck and those that require “AWAY FROM” segregation are separated by a horizontal distance of at least 12 m, and

(iii)no inert compressed gases that have subsidiary risks are carried on the deck;

(i)when the vehicle is carrying dangerous goods solely for hospital supply,

(i)the vehicle is on an open vehicle deck or on a partially open vehicle deck space fitted with an overhead deluge sprinkler system,

(ii)the accompanying dangerous goods documentation is clearly marked “Medical gases for hospital supply” or “gaz médicaux pour fournitures d’hôpitaux”, and

(iii)the only other compressed gases that are carried in the vehicle are

(A)compressed oxygen, contained in up to a maximum of 10 cylinders of not more than 25 cm in diameter or 150 cm in length, and

(B)compressed nitrous oxide, contained in up to a maximum of 4 cylinders of not more than 25 cm in diameter or 150 cm in length;

(j)when the cylinder is attached to a live-fish tank system,

(i)the tank is closed and permanently secured to the chassis of the vehicle,

(ii)the tank is oxygenated with not more than 5 L of gaseous oxygen per minute or in a manner or quantity that ensures that the oxygen is consumed by the fish to the maximum extent feasible,

(iii)the cylinder has a capacity not exceeding 17 L, and

(iv)the tank and the tubes connecting the cylinder to the tank are manufactured and installed to withstand a maximum pressure of 172.4 kPa (25 psi) in accordance with an engineering standard recognized by a provincial engineering association; and

(k)the vessel’s master or an officer designated by the master is aware at all times of the location on board of the vehicle’s operator.

(6)Subject to subsection (8), a passenger vessel that is engaged on a voyage other than a voyage described in subsection (1) may carry a motorized conveyance that has fuel in its fuel tank if

(a)when it is stowed on deck,

(i)its fuel tank is not so full as to be likely to spill because of an increase in volume from temperature changes, and

(ii)its ignition is switched off; and

(b)when it is stowed under deck,

(i)its fuel tank is drained so that not more than 10 L of gasoline remain in the tank,

(ii)its ignition is switched off, and

(iii)its battery terminals are disconnected and taped to prevent electrical shorting or it is stowed in a hold designated as a special category space in the vessel’s inspection certificate issued under the Act or, in the case of a foreign vessel, by or under the authority of the government of the state whose flag the vessel is entitled to fly.

(7)The master of a vessel that is not a passenger vessel shall ensure that a motorized conveyance that has fuel in its fuel tank is not carried on the vessel unless the conditions set out in subsection (6) are met.

(8)Before a motor vehicle that is carrying dangerous goods classified as Class 1 in the IMDG Code and is to be stowed under deck or towed on and off a closed vehicle deck, the vessel’s master shall ensure that

(a)its fuel tank is drained and its engine runs until it stalls for want of fuel;

(b)its ignition is switched off; and

(c)its battery terminals are disconnected and taped to prevent electrical shorting.

(9)The master of a vessel shall ensure that, before a motor vehicle is loaded onto the vessel, it is inspected for leakage of fuel or any other substance and, if there are signs of such leakage, the master shall ensure that it is not loaded onto the vessel until the leakage is stopped.

(10)To the extent feasible, the master of a vessel shall ensure that every motorized conveyance on board is stowed so as to permit inspection.

^note

Closed Vehicle Decks

152 #

(1)Every passenger shall keep off a closed vehicle deck on a vessel that is under way unless the passenger

(a)has received the express consent of the vessel’s master to enter the deck, if there are no packaged goods on the deck; or

(b)is accompanied by a crew member, if there are packaged goods on the deck.

(2)Subsection (1) does not apply when passengers are directed to return to their vehicles before the vessel docks.

^note

Report of Accident or Incident

153 #

If a vessel or person is in serious and imminent danger by reason of an accident or incident that occurs during the loading, carriage or unloading of dangerous goods, the vessel’s master shall immediately report the accident or incident to the Department of Transport Marine Safety Office nearest to the accident or incident by the quickest means available.

General Precautions on Vessels

154 #

(1)The master of a vessel shall ensure that packaged goods are safeguarded and handled carefully while they are being loaded onto, carried by and unloaded from the vessel.

(2)If packaged goods are to be loaded onto or unloaded from a vessel, its master shall ensure that an officer of the vessel or a person designated by its authorized representative is present while the goods are loaded or unloaded and while the holds of the vessel are open.

(3)Before commencing any voyage, the master of a tug who takes charge of an unoccupied barge carrying packaged goods shall ensure, to the extent that it is feasible, that the goods are carried in accordance with the IMDG Code.

(4)Subject to section 151, every person who is on or in the vicinity of a vessel carrying packaged goods or who is on board when packaged goods are being loaded or unloaded shall take the measures specified in the general precautions and the general provisions in the IMDG Code in respect of the activities in which they are engaged.

^note

Explosives, Ammonium Nitrate and Ammonium Nitrate Based Fertilizer

Loading and Unloading Explosives

155 #

(1)At least 24 hours before 25 kg or more, net explosives quantity, of packaged goods that are explosives, other than explosives included in Class 1.4S, are loaded onto or unloaded from a vessel, its master shall notify the following of the intention to load or unload and the location where it will take place:

(a)the Department of Transport Marine Safety Office nearest to that location; and

(b)if the loading or unloading is to take place at a port, the harbour master at the port or, if there is no harbour master, the person responsible for the port.

(2) and (3)[Repealed, SOR/2018-233, s. 1] (repealed)

Loading and Unloading Ammonium Nitrate or Ammonium Nitrate Based Fertilizer

156 #

(1)No person shall load or unload more than 10 000 tonnes of ammonium nitrate or ammonium nitrate based fertilizer.

(2)At least 24 hours before 150 tonnes or more of ammonium nitrate or ammonium nitrate based fertilizer are loaded onto or unloaded from a vessel, its master shall notify the following of the intention to load or unload and the location where it will take place:

(a)the Department of Transport Marine Safety Office nearest to that location; and

(b)if the loading or unloading is to take place at a port, the harbour master at the port or, if there is no harbour master, the person responsible for the port.

(3)The harbour master at the port or, if there is no harbour master, the person responsible for the port at the location where loading or unloading ammonium nitrate or ammonium nitrate based fertilizer will take place shall ensure that information in respect of fire prevention, emergency procedures, storage, cleanliness and separation from contaminants and other dangerous goods is available at the location.

Fire Protection

157 #

(1)The authorized representative of a vessel that is carrying, elsewhere than in a cargo transport unit, explosives, ammonium nitrate or ammonium nitrate based fertilizer in respect of which notification is required under subsection 155(1) or 156(2) shall ensure that the vessel is equipped with

(a)a power-operated fire pump whose source of power and sea connections are located outside the machinery space; and

(b)a self-contained set of breathing apparatus and, if there are more than three crew members, another set of breathing apparatus.

(2)If the machinery spaces in a vessel referred to in subsection (1) do not have a watch kept at all times while the machinery is operating, they shall be equipped with a fire detection system.

(3)If the vessel is of less than 500 gross tonnage and does not have a means to separate goods from heat sources as required by the IMDG Code, its master may, after notifying the Department of Transport Marine Safety Office nearest to the vessel, separate any goods from heat sources by

(a)a watertight steel bulkhead that consists of “A” class divisions within the meaning of subsections 1(2) and (3) of the Vessel Fire Safety Regulations;

(b)both

(i)a watertight steel bulkhead, and

(ii)a temporary bulkhead that is constructed to a standard that is at least equivalent to that for a bulkhead of a Type A magazine specified in the introduction of Class 1-Explosives in the IMDG Code, sheathed with fire-retardant material on the side closest to the machinery or accommodation space and positioned not more than 0.61 m from the steel bulkhead; or

(c)a distance of at least 3 m maintained between the goods and the heat source if the heat source is in a machinery or accommodation space and the goods are not within 3 m of any other goods other than goods that are not dangerous goods and that are compatible.

(4)If the vessel cannot, by reason of its design, disconnect the electrical circuits in a cargo space by positive means at a point external to the space, the fuses in the space shall be removed or the switches or circuit breakers in the space opened at the main panel.

Stowing

158 #

If explosives, other than those that have toxic or lachrymatory properties, of different compatibility groups cannot be segregated by the methods specified in the IMDG Code and a vessel’s authorized representative or master has so informed the Department of Transport Marine Safety Office nearest to the vessel, they may be stowed by

(a)placing them in a steel container that

(i)is in new or like-new condition, and

(ii)if they are explosive substances set out in the IMDG Code, is sheathed on all interior metal surfaces except the roof with wood or plywood that is 19 mm thick and, if the container has a wooden floor, is sheathed on the floor with masonite panels, or another material that is at least as smooth and hard as masonite, at least 6 mm thick;

(b)taping all joints in the interior sheathing or sealing them using waterproof materials to prevent leaking or sifting;

(c)securing the container against all movements of the vessel likely to be encountered on the voyage;

(d)if the container is carried on deck, stowing it so that access to its door is maintained at all times;

(e)except in the case of vessels carrying explosives exclusively, maintaining an intervening space of at least 6 m between the container and other containers of incompatible goods and between the containers and incompatible goods that are not in containers; and

(f)if the container is stowed in a cargo hold that does not have a means of detecting fire,

(i)fitting a system of sniffing-pipes in or adjacent to the spaces containing the explosives,

(ii)regularly monitoring the air in those spaces, and

(iii)entering the times and results of the monitoring in the deck log book.

Military Explosives

159 #

(1)Except when military explosives are to be carried or have been carried between Canadian ports in closed cargo transport units, a service representative officer shall

(a)be present while military explosives are loaded onto or unloaded from a vessel in a Canadian port and when any hold or magazine containing military explosives on a vessel is first opened;

(b)advise the vessel’s master on the safe stowage and segregation of any military explosives that are to be carried on the vessel; and

(c)immediately after military explosives are loaded onto the vessel, provide a signed statement to the master

(i)specifying the name, registration number, port of registry and gross tonnage of the vessel,

(ii)specifying the date of loading, and

(iii)certifying that the representative was present during the loading and that to the best of the representative’s knowledge the loading was done in accordance with this Division.

(2)The master shall keep the statement on board until the military explosives are unloaded.

^note

Explosives Used for Marine Drilling and Blasting Operations

160 #

(1)The master of a vessel that is engaged in marine drilling and blasting operations using explosives shall ensure that the requirements set out in subsections (2) to (15) are met.

(2)Explosives other than detonators

(a)shall not be carried on the vessel; and

(b)shall be stowed on an explosives-storage craft specially adapted for the carriage and stowage of explosives.

(3)The craft shall be moored securely to the vessel in a position that is remote from the drills and as far as possible from any navigable channel.

(4)The distance between the craft and the vessel shall be kept to a minimum to facilitate easy handling of the explosives.

(5)No person shall be on board the craft until the explosives are actually required.

(6)The craft shall be equipped with an efficient anchor that has sufficient line for use in case of an emergency.

(7)A sign reading “EXPLOSIVES” or “EXPLOSIFS” in letters that are at least 10 cm in height and displayed against a background of contrasting colour shall be displayed in a conspicuous position on the craft.

(8)If work is discontinued for more than 24 hours, all explosives remaining on the craft shall be moved ashore and placed in a magazine that is licensed under section 7 of the Explosives Act and meets the requirements of the Explosives Regulations.

(9)No person shall smoke or use naked lights or spark-producing equipment on the craft.

(10)Areas on the vessel where smoking or using naked lights or spark-producing equipment could create a fire or explosion hazard shall be identified and warning notices displayed in conspicuous places on board the vessel prohibiting the activity in those areas.

(11)Lightning conductors shall be fitted to wooden masts, and to steel masts if electrical conductivity of the rigging is defective, on the vessel and the craft. If the vessel or craft has a steel mast and the hull is made of steel, the mast shall be bonded to the hull.

(12)Detonators on the vessel shall be stowed in a locked box or cabinet remote from the drills.

(13)The armed charges shall be made ready only a few minutes before use and shall be stowed in a receptacle on the vessel.

(14)In each shift, one person shall be assigned to transfer the explosives from the craft to the vessel and another person shall be assigned to arm the charges.

(15)The two persons shall also be responsible for the mooring lines between the vessel and the craft and shall pay special attention to the lines while other vessels are navigating in the vicinity.

161 #

(1)The master of a vessel used to transport explosives to an explosives-storage craft required by paragraph 160(2)(b) shall ensure that

(a)no person other than a member of the crew or a marine safety inspector referred to in section 11 of the Act is on board while the explosives are being carried;

(b)detonators are not carried on a voyage with other explosives;

(c)a red flag is displayed while explosives are on board at any time other than during the night;

(d)a red light that is visible all around the horizon is displayed while explosives are on board during the night and the vessel is not under way;

(e)there is no smoking or use of naked lights or spark-producing equipment on or in the vicinity of the vessel while explosives are being loaded or unloaded or on the open deck of the vessel when it is under way; and

(f)as drilling and blasting progress, explosives are loaded on the vessel at points along the shore that are away from dwellings and as close as possible to the craft.

(2)In this section, “night” includes the portion of the day extending from one-half hour after sunset until one-half hour before sunrise.

Inspection at the Request of an Interested Person

162 #

(1)A marine safety inspector authorized by the Minister under subsection 11(2) of the Act to carry out inspections to ensure compliance with this Division shall carry out an inspection of a vessel on which dangerous goods are loaded, carried or unloaded to ensure compliance with this Division if an interested person makes a request to the Department of Transport Marine Safety Office nearest to the vessel.

(2)The inspector shall provide a signed statement to the vessel’s master and the interested person

(a)specifying the name, registration number, port of registry and gross tonnage of the vessel;

(b)specifying the date of the inspection; and

(c)stating the results of the inspection.

(3)[Repealed, SOR/2021-59, s. 22] (repealed)

(4)[Repealed, SOR/2021-59, s. 22] (repealed)

(5)[Repealed, SOR/2021-59, s. 22] (repealed)

Equivalents

163 #

Dangerous goods are deemed to be packed, marked and documented in accordance with this Division if they are

(a)carried only between places in Canada; and

(b)packed, marked and documented in accordance with the Transportation of Dangerous Goods Regulations.

Movement Document or Manifest

164 #

If the Cross-border Movement of Hazardous Waste and Hazardous Recyclable Material Regulations or the laws of a province in respect of the movement of waste or recyclable material require that a movement document or manifest be on board a vessel, its master shall ensure that the movement document or manifest is kept on board and is available for inspection.^note

Part 2 · Fumigation

Interpretation

200 #

The following definitions apply in this Part.

aerate means to reduce or attempt to reduce the concentration of a fumigantl. (aérer)

alongside means alongside a wharf or quay. (Version anglaise seulement)

clearance certificate means a certificate issued by a fumigator-in-charge or a marine chemist that certifies that a vessel or space is gas-free. (certificat d’attestation)

competent person means a person who has the knowledge and experience to safely and adequately perform the duties required by this Part of a fumigator-in-charge, including at least 150 hours of experience on board vessels under the supervision of a marine chemist or fumigator-in-charge in the use and operation of equipment that detects the presence of gas in the atmosphere. (personne compétente)

fumigant means a pesticide that acts in a gaseous state to fumigate. (fumigant)

fumigation in transit means the fumigation on a vessel of bulk cargo, or of a space that contains bulk cargo, while

(a)the vessel is en route between two ports; or

(b)the vessel is in a Canadian port if it is the intention of the master to continue the fumigation after the vessel leaves the port. (fumigation en cours de route)

fumigator-in-charge means a competent person responsible for carrying out a fumigation. (spécialiste)

gas-free, in respect of a space or a vessel, means that the presence of a fumigant cannot be detected in the space or the vessel by a fumigator-in-charge or another competent person using detection methods and equipment that are appropriate to the fumigant. (exempt de gaz)

marine chemist means a qualified person who

(a)is a graduate of a post-secondary educational institution and has

(i)successfully completed courses in chemical engineering,

(ii)successfully completed a general course with a major in chemistry, or

(iii)obtained a fellowship in the Chemical Institute of Canada; and

(b)has at least three years’ experience in chemical or engineering work after meeting the requirements of paragraph (a), of which at least 150 working hours were spent in ship-board work involving the testing of tank vessels and other vessels in the application of gas hazard control standards under the supervision of a person with at least 500 hours’ experience in that work. (chimiste de la marine)

Seaway has the same meaning as in subsection 2(1) of the Canada Marine Act. (voie maritime)

space means an enclosed space on a vessel. (espace)

TLV, in respect of a fumigant, means the highest allowable concentration of the fumigant in a space to which a person may be exposed under this Part. (VLE)

Application

201 #

This Part does not apply in respect of a cargo transport unit carried on a short-run ferry if

(a)the unit is stowed at either end of the ferry and is separated from all other cargo transport units and all vehicles by a distance of at least 1 m;

(b)smoking and the use of naked lights or spark-producing equipment are prohibited in the vicinity of the unit;

(c)any parking brakes that are fitted on the unit are securely set; and

(d)no person other than the operator of the unit is permitted by the ferry’s master to approach within 1 m of the unit.

Division 1 — General

Application

202 #

This Division applies in respect of fumigation and aeration

(a)on a Canadian vessel; and

(b)on a foreign vessel that is in Canadian waters if

(i)the fumigation begins in Canadian waters, or

(ii)any cargo destined for a Canadian port is fumigated in transit.

Use of Fumigants

203 #

(1)No person shall use a fumigant other than one set out in column 1 of Schedule 1 to fumigate on a vessel.

(2)If, at any time other than during a fumigation of a space, a person has reasonable grounds to believe that the concentration of a fumigant set out in column 1 of Schedule 2 in the space exceeds the TLV for the fumigant set out in column 2 or 3, the person shall immediately

(a)warn every person whom they know to be in the space that it should be evacuated; and

(b)notify the vessel’s master of the excessive concentration.

(3)After being notified of the excessive concentration, the master shall advise all persons on board the vessel of the excessive concentration.

(4)Every person in the space shall evacuate it after being advised of the excessive concentration.

(5)No person who has been advised of the excessive concentration shall enter the space unless that person wears a self-contained breathing apparatus required by paragraph 210(3)(d).

(6)The master shall ensure that the space is aerated by crew members with experience using the equipment to be used in the aeration or by persons assisting the fumigator-in-charge.

(7)Subsections (3) to (6) cease to apply when a competent person determines that the concentration of the fumigant does not exceed the applicable TLV.

Fumigating When a Vessel Is Not Alongside

204 #

(1)No person shall fumigate on a Canadian vessel that is not alongside.

(2)No person shall fumigate a space on a foreign vessel that is not alongside unless the space contains bulk cargo.

Fumigating the Contents of Barges or Cargo Transport Units

205 #

No person shall begin to fumigate the contents of a barge or cargo transport unit that is on board a vessel.

Notification and Conduct of Fumigation

206 #

(1)Before beginning to fumigate on a vessel in a Canadian port, the fumigator-in-charge shall ensure that notice of the intention to fumigate is given in writing to the Department of Transport Marine Safety Office nearest to the vessel.

(2)Before a vessel on which fumigation in transit has begun arrives at a Canadian port or the Seaway, the vessel’s master shall give notice to the Department of Transport Marine Safety Office nearest to the port or entry point to the Seaway that fumigation in transit on the vessel has begun.

(3)If feasible, the notice shall be given

(a)in the case of a vessel referred to in subsection (1), at least 24 hours before fumigation begins; and

(b)in the case of a vessel referred to in subsection (2), at least 24 hours before its arrival at the port or in the Seaway.

(4)The notice shall specify

(a)in the case of a vessel referred to in subsection (1), the name of the port where the fumigation will be carried out and, if applicable, the number of the berth within the port;

(b)in the case of a vessel referred to in subsection (2), the name of the port or the entry point to the Seaway; and

(c)in the case of a vessel referred to in subsection (1) or (2), the name of the fumigant and method of application involved and whether the fumigation

(i)is or will be of the cargo, cargo spaces or accommodation spaces on board the vessel,

(ii)will be completed before the vessel leaves the port or the Seaway, as the case may be,

(iii)is or will be a fumigation in transit, and

(iv)is or will be of cargo on board a vessel that will be unloaded at a Canadian port.

(5)If the fumigant to be used in a fumigation referred to in subsection (1) is, or during the fumigation is likely to become, a flammable gas, the vessel’s master shall, before fumigation begins,

(a)remove all flammable materials, including refuse and oily waste, from any space that is to be fumigated; and

(b)disconnect all electrical circuits that lead to any space that is to be fumigated.

Fumigator-in-Charge

207 #

(1)Subject to subsection (2), the master of a vessel shall ensure that every fumigation and every aeration are carried out under the direction of a fumigator-in-charge.

(2)A fumigator-in-charge is not required to be present in respect of

(a)a fumigation in transit that began in a Canadian port if the tests required by sections 219 and 220 are conducted and the requirements of section 221 are met;

(b)a fumigation in transit that began outside Canadian waters during the period beginning when the vessel enters Canadian waters and ending when it enters a Canadian port to unload cargo; or

(c)a fumigation of a cargo transport unit on board a vessel that began before the unit was loaded onto the vessel.

Report of Danger

208 #

If persons on board a vessel are in serious and imminent danger as a result of a fumigation on the vessel, its master shall immediately report the danger and the circumstances that gave rise to it to the Department of Transport Marine Safety Office nearest to the vessel by the quickest means available.

Division 2 — Fumigation of Cargo, Cargo Spaces and Accommodation Spaces While a Vessel Is Alongside

Application

209 #

This Division applies in respect of the fumigation and aeration of cargo, a cargo space or an accommodation space on a vessel while it is alongside.

Fumigation

210 #

(1)The fumigator-in-charge shall not begin fumigating or permit it to begin unless

(a)all persons who are on board the vessel and are not engaged in the fumigation or in the care of the vessel have disembarked;

(b)the fumigator-in-charge has on display near the gangways and near the entrances that lead to a space that is to be fumigated a sign that

(i)corresponds to the sign set out in Schedule 3 and bears the name of the fumigant being used, the date and hour when the fumigation began and the signature of the fumigator-in-charge or the vessel’s master, and

(ii)is rectangular in shape, at least 250 mm wide and at least 200 mm high with the word “DANGER” in letters at least 25 mm high; and

(c)he or she has posted a person to keep watch at each place where the vessel can be boarded while it is alongside.

(2)Subject to subsection 212(3), the persons referred to in paragraph (1)(a) shall not board the vessel until a clearance certificate has been issued in respect of the vessel.

(3)During fumigation,

(a)the person keeping watch shall not allow anyone who is not engaged in the fumigation or care of the vessel to board it;

(b)the fumigator-in-charge shall take all feasible measures to prevent the leakage of the fumigant from a space that is being fumigated;

(c)the fumigator-in-charge or a competent person acting under the direction of the fumigator-in-charge shall conduct any periodic tests that the fumigator-in-charge determines are necessary to ascertain whether a fumigant is leaking from a space that is being fumigated;

(d)each person on board the vessel shall have available for immediate use a self-contained breathing apparatus that can protect them against the fumigant; and

(e)subject to subsection (8), no person shall enter a space that is being fumigated.

(4)No person shall remove a sign referred to in paragraph (1)(b) until a clearance certificate has been issued in respect of the vessel or until aeration has been completed.

(5)When a clearance certificate has been issued in respect of the vessel, the vessel’s master shall ensure that any signs warning of the fumigation are removed.

(6)If the fumigant leaks from a space that is being fumigated,

(a)every person who is taking part in the fumigation shall, under the direction of the fumigator-in-charge, take all feasible measures to stop the leakage; and

(b)the fumigator-in-charge shall immediately notify the master of the leakage.

(7)If the leakage referred to in subsection (6) is stopped, the fumigator-in-charge shall notify the master of the stoppage. However, if the fumigator-in-charge determines that the leakage cannot be stopped, he or she shall direct the persons taking part in the fumigation to cease the fumigation and to aerate the space.

(8)If the fumigator-in-charge determines that entry into a space that is being fumigated is necessary, the fumigator-in-charge and one or more other persons experienced and knowledgeable in the use of the self-contained breathing apparatus required by paragraph (3)(d) may enter the space if they wear

(a)the apparatus; and

(b)a safety harness fitted with a lifeline that is tended by a person outside the space who is also wearing the apparatus.

Fumigation of Cargo

211 #

(1)Despite paragraph 210(1)(a), the fumigator-in-charge may begin fumigating cargo or permit it to begin when there are crew members on board the vessel who are not engaged in the fumigation or in the care of the vessel if

(a)the fumigator-in-charge has inspected the space in which the cargo is located and has advised the vessel’s master in writing that during the fumigation no fumigant is likely to leak from the space containing the cargo and into a space that is ordinarily occupied by crew members; and

(b)the space in which the cargo is located

(i)is not adjacent to a space that is ordinarily occupied by crew members, and

(ii)is separated by at least two gas-tight bulkheads from a space used by crew members.

(2)During a fumigation begun under subsection (1), the fumigator-in-charge or a competent person acting under the direction of the fumigator-in-charge shall conduct any periodic tests that the fumigator-in-charge determines are necessary to determine whether the concentration of a fumigant set out in column 1 of Schedule 2 in a space that is ordinarily occupied by crew members exceeds the TLV for the fumigant set out in column 2 or 3 of Schedule 2.

(3)If a test result shows that the concentration of a fumigant exceeds the applicable TLV, all persons on board the vessel who are not wearing the self-contained breathing apparatus required by paragraph 210(3)(d) shall immediately disembark.

(4)In this section, “gas-tight”, in relation to a bulkhead, means that no fumigant can pass

(a)through the bulkhead; or

(b)over the top, under the bottom or around either end of the bulkhead.

^note

Aeration

212 #

(1)After a space is fumigated, the fumigator-in-charge shall ensure that it is aerated.

(2)Before the aeration begins, the fumigator-in-charge shall advise the vessel’s master in writing of the location of the spaces that will be occupied by a crew member for the purpose of assisting in the aeration.

(3)A crew member may, subject to the direction of the fumigator-in-charge, board the vessel to assist in the aeration by opening the hatches of the vessel and operating generating and ventilation machinery if the crew member is wearing the self-contained breathing apparatus required by paragraph 210(3)(d).

(4)If a crew member assists in the aeration of a space, the fumigator-in-charge shall, as frequently as he or she determines it is necessary, conduct tests to measure the concentration of the fumigant in every space occupied by the member.

(5)If a test result shows that the concentration of the fumigant exceeds the TLV for the fumigant set out in column 2 or 3 of Schedule 2, every person in the space shall wear the self-contained breathing apparatus required by paragraph 210(3)(d) or evacuate the space until a test result shows that the concentration of the fumigant does not exceed the applicable TLV.

Clearance Certificates

213 #

(1)The fumigator-in-charge shall not issue a clearance certificate in respect of a vessel unless the vessel is gas-free.

(2)If the vessel is gas-free, the fumigator-in-charge shall issue a clearance certificate.

(3)Subject to Division 3, until a clearance certificate is issued, the vessel shall remain alongside.

(4)The vessel’s master shall record in the vessel’s logbook the issuance of a clearance certificate and the date of issuance.

Division 3 — Fumigation in Transit

Beginning Fumigation in Canadian Waters

214 #

No person shall begin fumigation in transit on a foreign vessel in Canadian waters unless the vessel is moored or at anchor in a Canadian port.

Subdivision 1 — Beginning Fumigation in a Canadian Port

Application

215 #

This Subdivision applies in respect of fumigation in transit on a foreign vessel that begins when the vessel is moored or at anchor in a Canadian port.

Methyl Bromide

216 #

No person shall fumigate with methyl bromide.

General

217 #

(1)No person shall begin fumigation unless

(a)the fumigator-in-charge, accompanied by the vessel’s master or the master’s agent, has inspected the space in which the cargo is to be fumigated before the cargo that is to be fumigated is loaded on board and has determined that, during the fumigation, no fumigant is likely to leak from the space containing the cargo and into an adjoining space or out of the vessel;

(b)the fumigator-in-charge has given a notice in writing to the vessel’s master that specifies

(i)the name of the fumigant that will be used,

(ii)any hazards that the fumigation might present,

(iii)the precautions or other steps that the crew shall take in relation to the fumigation, and

(iv)the results of the inspection referred to in paragraph (a) and specifically the determination of the fumigator-in-charge that, during the fumigation, no fumigant is likely to leak from the space containing the cargo and into an adjoining space or out of the vessel;

(c)the loading of cargo onto the vessel is completed and all persons, other than the persons who are engaged in the fumigation or who will sail with the vessel, have disembarked;

(d)the fumigator-in-charge has given notice in writing to the following of the location of the spaces that will be fumigated and of all other spaces that the fumigator-in-charge determines are unsafe for entry by any person during the fumigation and before the vessel becomes gas-free:

(i)the vessel’s master,

(ii)the harbour master at the port or, if there is no harbour master, the person responsible for the port, and

(iii)the Department of Transport Marine Safety Office nearest to the vessel;

(e)every person who will sail with the vessel has been informed by the fumigator-in-charge or by the vessel’s master of the carrying out of the fumigation and of the danger of entering the spaces referred to in paragraph (d);

(f)there is on display near the gangways and near the entrances that lead to the space in which the cargo is to be fumigated a sign that meets the requirements of paragraph 210(1)(b);

(g)the fumigator-in-charge has posted a person to keep watch at each place where the vessel can be boarded while it is moored or at anchor;

(h)no fewer than two crew members, one of whom is an officer, have knowledge of

(i)any instructions that appear on the package containing the fumigant to be used in the fumigation,

(ii)any recommendations or information provided by the manufacturer of the fumigant in respect of

(A)the method of detecting the fumigant when it is in a gaseous state,

(B)the behaviour and properties of the fumigant,

(C)the symptoms likely to be shown by and the medical treatment of a person who has been poisoned by the fumigant, and

(D)the emergency procedures that should be taken to prevent fire and explosion of the fumigant, and

(iii)the operation of any equipment on board that is used to detect the presence of a fumigant; and

(i)the vessel’s master has designated at least two of the crew members referred to in paragraph (h) to ensure that safe conditions in the accommodation spaces and working spaces are maintained after the fumigator-in-charge leaves the vessel.

(2)No person shall remove the signs referred to in paragraph (1)(f) until a clearance certificate has been issued in respect of the space or until aeration has been completed.

(3)When a clearance certificate has been issued in respect of the space, the vessel’s master shall ensure that any signs warning of the fumigation are removed.

(4)The person keeping watch shall not allow a person who is not engaged in the fumigation or who will sail with the vessel to board it while it is moored or at anchor.

(5)Despite paragraph (1)(a), fumigation may begin when the inspection referred to in that paragraph is carried out after cargo has been loaded if

(a)the holds adjacent to the accommodation spaces are not fumigated; and

(b)the vessel is alongside or, if it is not safe for the vessel to be alongside, it is moored elsewhere or at anchor and a launch service is available on short notice at all times.

Equipment and Documents

218 #

(1)The master of a vessel shall ensure that it is equipped with

(a)four sets of self-contained breathing apparatus that meet the requirements of paragraph 210(3)(d) together with four additional filled air bottles, four safety harnesses and four lifelines;

(b)two devices that can detect the presence of a fumigant when the fumigant is used in its gaseous state;

(c)the instructions provided by the manufacturer of the fumigant for the disposal of the fumigant;

(d)the most recent version of the Medical First Aid Guide for Use in Accidents Involving Dangerous Goods (MFAG), published by the IMO; and

(e)the medicines and medical equipment specified in the Guide referred to in paragraph (d) for the fumigant used in the fumigation.

(2)The equipment required by paragraphs (1)(a) and (b) is in addition to any other equipment that is required to be carried on board the vessel when no fumigation takes place.

(3)If the devices referred to in paragraph (1)(b) require re-arming after use, the authorized representative of the vessel shall ensure that it is equipped with 10% more spare tubes than are needed to conduct the tests required by paragraph 220(3)(a) for the duration of the voyage.

Tests Before Leaving Port

219 #

(1)Subject to subsection 220(1), the vessel shall not leave the port until

(a)24 hours after fumigation begins or any longer period that the fumigator-in-charge determines is necessary to ascertain whether there is any leakage of the fumigant has elapsed; and

(b)the fumigator-in-charge has advised the vessel’s master in writing that he or she has determined that there are at least two crew members on board the vessel, including at least one officer, who meet the requirements of paragraph 217(1)(h).

(2)The fumigator-in-charge shall conduct any periodic tests that he or she determines are necessary to ascertain whether a fumigant is leaking from a space in which cargo is being fumigated, including tests to determine whether the concentration of the fumigant in the space is sufficiently high during the testing to detect leakage.

(3)The tests shall be conducted at least three times and the last test shall be conducted at the end of the 24-hour period or the longer period, as the case may be.

(4)If the fumigator-in-charge determines that a fumigant is leaking, the vessel shall not leave the port until he or she

(a)ascertains that the leakage has stopped after conducting any additional tests that he or she determined were necessary; and

(b)issues a clearance certificate in respect of every space into which the fumigant was leaking.

(5)If, after conducting the periodic tests and any additional tests, the fumigator-in-charge determines that no fumigant is leaking from the space, he or she shall advise the vessel’s master in writing that on completion of the testing no fumigant was detected in any space adjoining the space in which cargo is being fumigated or, in the case of a fumigation referred to in subsection 217(5), in the holds adjacent to the accommodation spaces.

When Fumigator-in-charge Is on Board the Vessel After It Leaves Port

220 #

(1)Section 219 does not apply if a fumigator-in-charge is on board the vessel when it leaves the port and remains on board

(a)for at least 24 hours;

(b)until he or she determines that

(i)the concentration of the fumigant in a space that is being fumigated is sufficiently high that he or she could detect whether any of the fumigant is leaking from the space,

(ii)all spaces in the vessel that are adjacent to the space in which the cargo is being fumigated are gas-free, and

(iii)there are at least two crew members on board the vessel, including at least one officer, who meet the requirements of paragraph 217(1)(h); and

(c)for any additional period that he or she determines is necessary in the circumstances.

(2)The fumigator-in-charge or a competent person acting under his or her direction shall conduct any periodic tests in the vessel that the fumigator-in-charge determines are reasonably necessary to ascertain whether any fumigant is leaking from a space that is being fumigated, including tests to determine whether the concentration of the fumigant in the space where the cargo is being fumigated is sufficiently high during the testing to detect leakage.

(3)The tests shall be conducted

(a)at least every eight hours, with the first test beginning when the vessel leaves the place where the fumigation began; and

(b)in a manner that will indicate whether any fumigant is leaking into any space that is ordinarily or is likely to be occupied by a crew member.

Before the Fumigator-in-charge Leaves the Vessel

221 #

The fumigator-in-charge shall not leave the vessel unless

(a)the concentration of the fumigant in a space that is being fumigated was sufficiently high that he or she could have detected whether any of the fumigant was leaking from the space;

(b)all spaces in the vessel that are adjacent to the space in which the cargo is being fumigated are gas-free;

(c)the equipment referred to in paragraphs 218(1)(a) and (b) is on board;

(d)there is a sufficient number of crew members on board who are qualified to use the devices referred to in paragraph 218(1)(b) to detect the presence of a fumigant in a space during the voyage; and

(e)he or she has notified the vessel’s master in writing that the responsibility for carrying out the fumigation rests with the master.

Subdivision 2 — Fumigation That Begins in a Canadian Port or Outside Canadian Waters

Application

222 #

This Subdivision applies in respect of fumigation in transit on a foreign vessel and the aeration of spaces in it if

(a)the fumigation begins while the vessel is moored or at anchor in a Canadian port; or

(b)the vessel is in Canadian waters and the fumigation began before it entered Canadian waters.

Fumigant Detected in a Space That Is Likely to Be Occupied

223 #

(1)Every person who detects a fumigant in a space that is likely to be occupied by any person shall immediately notify the persons occupying the space and the vessel’s master.

(2)Every person in the space shall evacuate it.

(3)The vessel shall go to the nearest Canadian port and remain there until the space is gas-free.

Report of Danger

224 #

If persons on board a vessel are in serious and imminent danger as a result of the fumigation of the vessel, its master shall immediately report the danger and the circumstances that gave rise to it to the Department of Transport Marine Safety Office nearest to the vessel by the quickest means available.

Recording Tests

225 #

If a person conducts a test to determine whether a fumigant is present in a space, the vessel’s master shall record the date and results of the test in the vessel’s logbook.

Aeration

226 #

(1)If the vessel is under way, the vessel’s master or, if a fumigator-in-charge is on board, the fumigator-in-charge shall ensure that any aeration of a space that was fumigated is carried out in a manner that minimizes the likelihood of the fumigant entering a space in the vessel that is ordinarily occupied by a crew member or into a ventilation system.

(2)The vessel’s master shall ensure that the aeration is carried out only if he or she determines that it is necessary for the safety of the crew or to meet an emergency that could affect the crew.

(3)During the aeration, the master or, if a fumigator-in-charge is on board, the fumigator-in-charge shall conduct tests to determine the concentration of a fumigant in a space that is ordinarily occupied by a crew member and in each ventilation system.

(4)If a test result shows that the concentration of the fumigant exceeds the TLV for the fumigant set out in column 2 or 3 of Schedule 2,

(a)the master shall direct that the aeration be stopped and the space that is being aerated be sealed to prevent leakage of the fumigant; and

(b)the aeration of the space shall not resume unless the master or, if a fumigator-in-charge is on board, the fumigator-in-charge determines that its resumption will not cause the concentration of the fumigant to exceed the applicable TLV in the space or ventilation system.

Division 4 — Arrival of Cargo That Has Been Fumigated in Transit

Subdivision 1 — Unloading or Topping Off

Application

227 #

This Subdivision applies in respect of a foreign vessel in Canadian waters if it is carrying bulk cargo that has been fumigated in transit and any part of it is to be unloaded or topped off at a Canadian port.

Notice

228 #

No vessel shall enter Canadian waters until a notice has been sent to the Department of Transport Marine Safety nearest to the port to which the vessel is destined that sets out

(a)the name of the vessel;

(b)the name of the port;

(c)the expected date of the vessel’s arrival in the port;

(d)the nature of the cargo;

(e)the name of the fumigant that was used to fumigate the cargo; and

(f)the date on which the fumigation in transit began.

Entering Spaces

229 #

(1)No person shall enter a space that was fumigated unless a clearance certificate has been issued in respect of the space.

(2)Subsection (1) does not apply to any person

(a)who is wearing a self-contained breathing apparatus that can protect them against any fumigant that is used for the fumigation and who is experienced and knowledgeable in the use of the apparatus; and

(b)who is wearing a safety harness fitted with a lifeline that is tended by a person outside the space who is also wearing such an apparatus.

Removal of Signs

230 #

(1)When a clearance certificate has been issued in respect of a space, the vessel’s master shall ensure that any signs warning of the fumigation are removed.

(2)The master shall enter the date and time of the issuance of the clearance certificate and of the removal of the signs in the vessel’s logbook.

Conditions for Unloading and Topping Off

231 #

(1)No person shall unload or top off the cargo unless a clearance certificate has been issued in respect of the space where the cargo is located.

(2)Every person who unloads or tops off the cargo shall use mechanical equipment that is controlled from outside the space in which the fumigation in transit was carried out.

(3)Every person who operates the mechanical equipment shall do so on an open deck of the vessel windward of the hatchway through which the cargo is unloaded or loaded and well clear of all ventilators.

(4)During the unloading or topping off of the cargo, no person shall enter the space from which it is being unloaded or topped off.

(5)Despite subsection (4), a person may enter the space to service the mechanical equipment if they are at all times accompanied by a competent person who continuously measures the concentration of the fumigant at or near the place where the servicing takes place.

(6)If the concentration of a fumigant set out in column 1 of Schedule 2 in a space exceeds one half of the TLV for the fumigant set out in column 2 or 3 of Schedule 2, every person in the space shall evacuate it or wear a self-contained breathing apparatus that can protect them against the fumigant.

Subdivision 2 — When Cargo Is Not to Be Unloaded or Topped Off

Application

232 #

This Subdivision applies in respect of a foreign vessel if it is carrying bulk cargo that has been fumigated in transit and enters a Canadian port for a purpose other than the unloading or topping off of any of that cargo.

Duty of Master

233 #

The master of a vessel shall ensure that a fumigator-in-charge boards the vessel immediately after it is moored in a Canadian port.

Duties of Fumigator-in-charge

234 #

The fumigator-in-charge shall, as soon as feasible,

(a)display near the gangways and near the entrances that lead to a space in which cargo has been fumigated a sign that meets the requirements of paragraph 210(1)(b);

(b)post a person to keep watch at each place where the vessel can be boarded while it is moored; and

(c)conduct any periodic tests that he or she determines are necessary to ascertain whether a fumigant is leaking from a space in which the cargo has been fumigated, including tests to determine whether the concentration of the fumigant in the space where the cargo has been fumigated is sufficiently high during the testing to detect leakage.

Leakage of Fumigant

235 #

(1)If the fumigator-in-charge determines that a fumigant is leaking into a space that is likely to be occupied by any person, the vessel shall not leave the port until

(a)the fumigator-in-charge ascertains that the leakage has stopped after conducting any additional tests that he or she determined were necessary; and

(b)the fumigator-in-charge issues a clearance certificate in respect of the space into which the fumigant was leaking.

(2)If, after conducting the initial tests and any additional tests, the fumigator-in-charge determines that no fumigant is leaking from the space, he or she shall advise the vessel’s master in writing that on completion of the testing no fumigant was detected in any space adjoining the space in which cargo was fumigated.

Duties of Person Keeping Watch

236 #

(1)The person keeping watch shall not allow a person who is not a crew member and is not on the vessel’s business to board the vessel.

(2)The person keeping watch shall ensure that any person who is not a crew member but is on the vessel’s business does not enter a space in respect of which a sign required by paragraph 234(a) is displayed.

^note

If Cargo is Aerated

237 #

(1)If the vessel’s master directs that any of the cargo that was fumigated in transit be aerated, the fumigator-in-charge or, if the fumigator-in-charge is not on board, the master shall ensure that the aeration is carried out in a manner that minimizes the likelihood of the fumigant entering a space in the vessel that is ordinarily occupied by a crew member or into a ventilation system.

(2)During the aeration, the fumigator-in-charge or, if the fumigator-in-charge is not on board, the master shall conduct tests to measure the concentration of a fumigant in a space that is ordinarily occupied by a crew member and in each ventilation system.

(3)If a test result shows that the concentration of the fumigant exceeds the TLV for the fumigant set out in column 2 or 3 of Schedule 2, the master shall

(a)ensure that every person in the space

(i)wears self-contained breathing apparatus that can protect them against the fumigant, or

(ii)evacuates it until a test result shows that the concentration of the fumigant does not exceed the applicable TLV; or

(b)direct that the aeration be stopped and the space that is being aerated be sealed to prevent leakage of the fumigant until a fumigator-in-charge determines that the resumption of aeration will not cause the concentration of the fumigant to exceed the applicable TLV in the space or ventilation system.

Division 5 — Carriage of Cargo Transport Units That Have Been Fumigated

238 #

This Division applies in respect of cargo transport units of which the contents have been fumigated but not aerated before the units are loaded on board a vessel.

239 #

No person shall load a cargo transport unit onto a vessel unless

(a)a competent person has determined that the concentration of fumigant is reasonably uniform throughout the unit; and

(b)the vessel’s master has been informed that the contents of the unit have been fumigated.

240 #

(1)The master of a vessel shall ensure that every cargo transport unit on board is stowed on an open deck at a distance of at least 6 m from the crew accommodation, the passenger accommodation, if any, work areas and vessel ventilation intakes.

(2)Despite subsection (1), a cargo transport unit may be stowed below deck in a vessel that is equipped with a mechanical ventilation system that operates in the space where the unit is stowed if the vessel carries not more than 25 passengers or 1 passenger for every 3 m of the vessel’s overall length, whichever is greater.

^note

241 #

If a cargo transport unit is stowed on board a vessel, the vessel shall not enter a Canadian port unless the vessel’s master has notified the following of the vessel’s expected arrival at the port at least 24 hours before the vessel enters the port:

(a)the Department of Transport Marine Safety Office nearest to the port; or

(b)the harbour master at the port or, if there is no harbour master, the person responsible for the port.

Part 3 · Tackle

Interpretation

300 #

(1)The following definitions apply in this Part.

accommodation ladder means a means of access to and egress from a vessel that includes platforms on different levels with ladders between the platforms and that

(a)is suspended by a supporting structure of chains or steel wire ropes from its lowest suspension point;

(b)is hinged at its top; and

(c)can be moved so that the lowest platform is accessible from shore. (échelle de coupée)

cargo gear includes lifting appliances and forklift trucks. (engins de manutention)

category 1 lifting appliance means

(a)a crane, other than a mobile crane, installed on a vessel; or

(b)a derrick, a derrick crane or an elevator. (appareil de levage de catégorie 1)

category 2 lifting appliance means a container crane, a rail-mounted or wharf crane with a safe working load of 10 tonnes or more, a sheerlegs or a shore-based shiploader. (appareil de levage de catégorie 2)

category 3 lifting appliance means a rail-mounted or wharf crane with a safe working load of less than 10 tonnes or grain loading equipment. (appareil de levage de catégorie 3)

category 4 lifting appliance means a mobile crane or any other mobile lifting-machine, other than a forklift truck, that has load radius restrictions similar to those of a mobile crane. (appareil de levage de catégorie 4)

category 5 lifting appliance means a vehicle ramp installed on a vessel or a continuous loading or unloading system or appliance. (appareil de levage de catégorie 5)

classification society means the American Bureau of Shipping, Bureau Veritas (Canada), Det norske Veritas, Lloyd’s Register of Shipping, Germanischer Lloyd or, in respect of a foreign vessel, any similar organization recognized by or under the laws of the state whose flag the vessel is entitled to fly. (société de classification)

Convention 152 means the Convention Concerning Occupational Safety and Health in Dock Work, adopted by the International Labour Conference on June 25, 1979. (Convention 152)

expert person, in respect of a specified function, means a person who has the knowledge, training and experience to perform the function safely and properly. (expert)

lifting appliance means a category 1 lifting appliance, a category 2 lifting appliance, a category 3 lifting appliance, a category 4 lifting appliance or a category 5 lifting appliance. (appareil de levage)

loose gear means small cargo gear, such as rings, hooks, shackles, pulley blocks, links, swivels, chains, slings and wire pennants, that is not permanently attached to a lifting appliance or the vessel. It does not include wire rope, wire banding or flat steel strapping that unitizes cargo. (engins mobiles)

main accessory gear means any cargo gear that is designed to be used with a lifting appliance, such as spreaders, container frames, probes, grabs, vacuum discs, friction clamps and heavy hooks. It does not include loose gear, wire rope, wire banding or flat steel strapping that unitizes cargo. (engins accessoires principaux)

material includes cargo, equipment, fittings, fuel and ships’ stores. (marchandises)

material handling means all or any part of the work of

(a)moving or handling material that is performed on board a vessel; or

(b)loading or unloading a vessel that is performed

(i)on board a vessel,

(ii)on a crib or structure that the vessel is alongside, or

(iii)onshore in Canada, in an area within the scope of any lifting appliance or other equipment that is employed in the loading or unloading of a vessel and in the immediate approaches to such an area, other than in a shed or warehouse or any part of a wharf forward or aft of the vessel’s mooring lines. (manutention de marchandises)

pulley block includes a single- or multiple-sheave block, but does not include a crane block specially constructed for use with a crane to which it is permanently attached. (moufle)

restricted vessel means a vessel that is prevented from heeling by means such as fittings that secure the vessel to the sea floor. (bâtiment restreint)

Safety and Health in Ports means Safety and Health in Ports, published by the International Labour Office. (Sécurité et santé dans les ports)

Safety Code on Mobile Cranes means CAN/CSA Standard Z150-98, Safety Code on Mobile Cranes, published by the Canadian Standards Association. (Code de sécurité sur les grues mobiles)

safety factor means the number of times that a load can be increased before failure occurs. (coefficient de sécurité)

SWL means safe working load. (CMU)

thorough examination means, in respect of cargo gear or an accommodation ladder, a detailed visual examination supplemented, if necessary, by non-destructive testing, dismantling of components, measurement of corrosion, deformation and wear, evaluation of structural and moving parts under working conditions and other means, in order to arrive at a reliable conclusion as to the safety of the gear or ladder. (examen approfondi)

union purchase means a pair of derricks rigged in a fixed position with the cargo runners coupled. (colis volant)

worker means any person engaged in material handling. (travailleur)

(2)For the purposes of this Part, a competent person is

(a)in respect of the testing and thorough examination of cargo gear,

(i)a marine safety inspector referred to in section 11 of the Act,

(ii)a surveyor employed by a classification society, or

(iii)if the gear is part of a vessel’s equipment, a surveyor authorized by or under the laws of the state whose flag the vessel is entitled to fly to perform the testing and thorough examination;

(b)in respect of the testing and thorough examination of specific cargo gear, a person who has appropriate technical qualifications with respect to its testing or thorough examination and is employed by

(i)a testing laboratory, or

(ii)a person engaged in the manufacture or repair of the gear; and

(c)in respect of the thorough examination of cargo gear, a person who is employed by the owner of the gear and who

(i)holds a master certificate of competency, a chief mate certificate of competency or a first- or second-class engineer certificate of competency, or

(ii)has the experience necessary to perform the thorough examinations.

(3)Until two years after the day on which this section comes into force a reference in this Part to “Convention 152” shall be read as a reference to “Convention 152 or the Convention Concerning the Protection Against Accidents of Workers Employed in Loading or Unloading Ships (Revised 1932), adopted by the International Labour Conference on April 27, 1932”.

Application

301 #

(1)This Part applies in respect of

(a)cargo gear used in material handling; and

(b)shore-based power-operated ramps and accommodation ladders used to access vessels.

(2)This Part does not apply in respect of vessels engaged in dredging or construction operations.

(3)Sections 302 to 359 do not apply in respect of lifting appliances that are operated onshore or on a restricted vessel in accordance with any regulations of the province in which the lifting appliance is being operated, standards of the International Standards Organization or standards of the Deutsches Institut für Normung e. V. (DIN) that the Minister has determined would result in an equivalent or greater level of safety to that provided for by those sections.

(4)Division 1 does not apply when the load handled does not exceed 455 kg.

Division 1 — Cargo Gear

Compliance

302 #

(1)The authorized representative of a vessel shall ensure that the requirements of this Division are met in respect of cargo gear that is part of the vessel’s equipment.

(2)Except as provided in subsection (3), the owner of cargo gear that is not part of a vessel’s equipment shall ensure that the requirements of this Division are met in respect of the gear.

(3)In the case of unitized cargo and wire banding or flat steel strapping that unitizes cargo,

(a)before the cargo is loaded on a vessel in Canadian waters, the shipper shall ensure that the requirements of sections 361 and 362 are met in respect of the banding or strapping; and

(b)while the cargo is being carried on or unloaded from a vessel, the master of the vessel shall ensure that the requirements of sections 361 and 362 are met in respect of the banding or strapping.

(4)If a category 4 lifting appliance is used on board a Canadian vessel on a temporary or seasonal basis, the owner of the appliance and the authorized representative of the vessel shall ensure that the requirements of this Division are met in respect of the appliance.

(5)Sections 303 to 306 do not apply in respect of cargo gear on board a foreign vessel if the gear was tested and examined in accordance with, and a certificate was signed after the last time the gear was tested or thoroughly examined under,

(a)the laws of the state whose flag the vessel is entitled to fly if that state is a party to Convention 152; or

(b)the regulations, rules or codes of a classification society that the Minister has determined would result in an equivalent or greater level of safety to that provided for by those sections.

Testing, Thorough Examination and Inspection

Lifting Appliances

303 #

(1)Every lifting appliance shall be tested by a competent person in the manner set out in Schedule 4

(a)before the appliance is used for the first time or, in the case of a category 4 lifting appliance installed on a vessel that is not a restricted vessel, before the first time it is used on the vessel;

(b)after replacement, modification or repair of any stress-bearing part, unless the part is mechanically detachable and has been tested separately from the appliance and certified in accordance with section 312;

(c)at least once every five years if the appliance is a category 1 lifting appliance, category 2 lifting appliance, or category 3 lifting appliance; and

(d)at least once every four years if the appliance is a category 4 lifting appliance.

(2)If a lifting appliance cannot be tested in the manner set out in Schedule 4 because of any design feature specific to the appliance, the testing shall be adapted to take that feature into account.

(3)A lifting appliance shall not be tested unless the competent person has been provided with

(a)a certificate in respect of the appliance that was issued under subsection 312(1) after a previous test;

(b)the design plans of the appliance’s manufacturer that set out the manufacturer’s ratings for the appliance, including its safe working load; or

(c)an affidavit sworn by the appliance’s manufacturer or a professional engineer that attests to its safe working load and compliance with the requirements of section 317 in respect of safety factors at that safe working load.

(4)A lifting appliance passes the test if

(a)the means provided on all winches to stop and hold the load in position are effective;

(b)if electrical winches are fitted with electromagnetic brakes and with mechanical brakes for manual operation, the mechanical brakes are in good condition;

(c)the emergency stopping devices fitted on winches are effective;

(d)no defects or signs of permanent deformation are detected; and

(e)in the case of a mobile crane on a vessel that is not a restricted vessel, the slewing capacity of the crane when tested secured to the vessel is adequate to control the boom under the heel produced by the testing.

(5)Paragraph (1)(a) does not apply in respect of a category 5 lifting appliance that is installed on a Canadian vessel that is not a Safety Convention vessel and is operated on that vessel before this section comes into force.

304 #

(1)A lifting appliance shall be thoroughly examined

(a)by a person referred to in paragraph 300(2)(a) or (b) on completion of every test carried out under subsection 303(1); and

(b)by a competent person at least once every year after it is tested.

(2)A category 5 lifting appliance installed on a Canadian vessel that is not a Safety Convention vessel and operated on that vessel before this section comes into force shall be thoroughly examined

(a)by a person referred to in paragraph 300(2)(a) or (b) within one year after the day on which this section comes into force and at least once every five years after that examination; and

(b)by a competent person at least once every year after the most recent examination made in accordance with paragraph (a).

(3)A lifting appliance passes the examination if

(a)certificates have been issued under section 312 for the loose gear used with the appliance;

(b)the parts that align and swivel under load are free;

(c)the mechanical, electrical, gearing, hydraulic and pneumatic systems are in good working order;

(d)parts are not affected by corrosion to the extent that they cannot be opened; and

(e)no defects or signs of permanent deformation are detected.

Loose Gear and Main Accessory Gear

305 #

(1)The loose gear or main accessory gear set out in column 1 of Schedule 5 shall be tested by a competent person with a load equal to the load set out in column 2

(a)before the gear is used for the first time; and

(b)after the gear is modified or repaired and before it is used again.

(2)For the purpose of subsection (1),

(a)single-sheave pulley blocks with a becket shall be tested with the becket included in the reaving; and

(b)friction, electro-magnetic and vacuum connectors shall be tested for five minutes with the type of material that they are designed to lift.

(3)Main accessory gear shall not be tested unless the competent person has been provided with

(a)a certificate in respect of the gear that was issued under subsection 312(2) after a previous test;

(b)the design plans of the gear’s manufacturer that set out the manufacturer’s ratings for the gear, including its safe working load; or

(c)an affidavit sworn by the gear’s manufacturer or a professional engineer that attests to its safe working load and compliance with the requirements of section 317 in respect of safety factors at that safe working load.

(4)Gear passes the test if it is does not break and no defects or signs of permanent deformation are detected.

306 #

(1)Loose gear and main accessory gear shall be thoroughly examined

(a)by a person referred to in paragraph 300(2)(a) or (b) on completion of every test carried out in accordance with subsection 305(1); and

(b)by a competent person at least once every year after it is tested.

(2)Gear passes the examination if no defects or signs of permanent deformation are detected.

Wire Ropes

307 #

Before being used, wire rope shall be tested by a competent person causing a sample section to be pulled to destruction.

308 #

(1)Wire rope shall be thoroughly examined by a competent person at least once every year after it is tested or, if the rope passes over a drum or sheave, at least once every six months after it is tested.

(2)Wire rope passes the examination if

(a)there is no sign of internal corrosion;

(b)there is no sign of a tendency towards separation of the strands or wires;

(c)there are no flats on individual wires;

(d)the number of broken wires in any length equal to eight diameters does not exceed

(i)10% of the total number of wires in the length, or

(ii)any lesser number of broken wires that is required by section 12 of Wear Standards for Cargo Gear, TP 9396, published by the Department of Transport; and

(e)its diameter is not reduced by more than

(i)7% when elongation of the lay has occurred or a strand is becoming buried, or

(ii)10% when the lay is uniform.

^note

Metal Fittings Attached to Wire Ropes

309 #

(1)Before being used, a metal fitting attached to a wire rope by swaging or socketing shall be tested by a competent person with a load equal to 200% of the rope’s safe working load.

(2)A fitting passes the test if it does not break and no defects or signs of permanent deformation are detected.

(3)Despite subsections (1) and (2), fittings attached by swaging by the same machine to wire rope that is the same type and size and is less than 25 mm in diameter may be type tested if

(a)at least 10% of the fittings are proof tested by a person referred to in paragraph 300(2)(b) with a load equal to 200% of the rope’s safe working load and the fittings tested do not break and no defects or signs of permanent deformation are detected;

(b)one fitting in every one thousand or fewer is pulled to destruction and the fitting does not break or fail at less than the breaking strength of the rope;

(c)the person who performs the proof testing signs a certificate that certifies that the fitting passed the test and sets out

(i)a description of the fittings and the rope,

(ii)any identifying marks on the fittings,

(iii)the name of the manufacturer of the fittings,

(iv)the date of the test, the number of fittings tested and the total number of fittings being certified,

(v)the load applied and the safe working load,

(vi)their name and

(A)if they are an employee, the name and address of their employer, or

(B)if they are not an employee, their address, and

(vii)their technical qualifications;

(d)the fittings are marked to identify them to the test certificate; and

(e)the certificate is kept on board the vessel or at the rope owner’s premises, as the case may be.

Prohibitions

310 #

(1)No lifting appliance, loose gear or main accessory gear shall be used unless a certificate was issued under subsection 312(1) or (2) after the last time it was tested or thoroughly examined under

(a)any of sections 303 to 306;

(b)the laws of a state whose flag a foreign vessel is entitled to fly if the appliance or gear is being used on the vessel and the state is a party to Convention 152; or

(c)regulations, rules or codes of a classification society that the Minister has determined would result in an equivalent or greater level of safety to that provided for by sections 303 to 306.

(2)No loose gear or wire rope shall be used unless an expert person inspected it within the preceding three months and determined that it is safe to use.

(3)No wire rope shall be used unless it passed its most recent thorough examination under section 308.

(4)No wire rope in which any wire is broken shall be used unless an expert person inspects it on the day of its intended use and determines that it is safe to use.

(5)No wire rope with a metal fitting attached to it by swaging or socketing shall be used unless the metal fitting passed the test under section 309.

(6)Friction, electro-magnetic and vacuum connectors shall not be used to lift any type of material not listed on the certificate issued under subsection 312(2) if anyone is within range of any material that could fall when the lifting is started.

(7)No mechanical, electrical, gearing, hydraulic or pneumatic system or machine shall be used if it is not in good working order.

^note

Registers and Certificates

Registers

311 #

(1)The master of a vessel shall keep on board the vessel a register that lists the cargo gear that forms part of the equipment of the vessel.

(2)A register that lists cargo gear that does not form part of the equipment of a vessel and is tested or thoroughly examined under any of sections 303 to 306 shall be kept at the premises of the gear’s owner.

(3)A competent person who tests or thoroughly examines a lifting appliance, loose gear or main accessory gear shall enter the following in the register in a space adjacent to the listing for the appliance or gear and shall sign the register:

(a)the date of the test or examination;

(b)the particulars and results of the test or examination;

(c)their name and

(i)if they are an employee, the name and address of their employer, or

(ii)if they are not an employee, their address; and

(d)the position, qualifications, certification or experience that qualifies them as a competent person.

(4)A competent person who thoroughly examines a category 1 lifting appliance, a category 2 lifting appliance, a mobile crane on a vessel or a category 5 lifting appliance that has been in use for five years or more shall record measurements of any corrosion, deformation or significant wear in structural or moving parts under subsection (3) or in a certificate attached to the register under subsection 312(7) if such measurements have not been so recorded within the previous five years.

(5)A competent person who thoroughly examines a wire rope shall enter the following in the register in a space adjacent to the listing of the rope or, if the rope is part of a lifting appliance, in a space adjacent to the listing for the appliance, and shall sign the register:

(a)the date of the examination;

(b)the particulars and results of the examination;

(c)their name and

(i)if they are an employee, the name and address of their employer, or

(ii)if they are not an employee, their address; and

(d)the position, qualifications, certification or experience that qualifies them as a competent person.

(6)Despite subsections (3) to (5), in the case of a foreign vessel that is entitled to fly the flag of a state that is a party to Convention 152, the competent person may enter the information required by that state.

Certificates

312 #

(1)If a lifting appliance passes the test under section 303 or the thorough examination under section 304, the competent person shall sign and issue a certificate that certifies that the appliance passed the test or examination and sets out

(a)the location and a description of the appliance;

(b)any identifying marks on the appliance;

(c)if a test was conducted, the load applied and either the angle to the horizontal or the radius at which the load was applied;

(d)their name and

(i)if they are an employee, the name and address of their employer, or

(ii)if they are not an employee, their address; and

(e)the position, qualifications, certification or experience that qualifies them as a competent person.

(2)If loose gear or main accessory gear passes the test under section 305 or the thorough examination under section 306, the competent person shall sign and issue a certificate that certifies that it passed the test or examination and sets out

(a)the location and a description of the gear;

(b)any identifying marks on the gear;

(c)in the case of loose gear,

(i)the name of its manufacturer or supplier, and

(ii)if a test was conducted, the date of the test and the number of similar pieces of gear tested on that date;

(d)if a test was conducted, the load applied and the safe working load;

(e)in the case of a test of a friction, an electro-magnetic or a vacuum connector, the type of material tested;

(f)their name and

(i)if they are an employee, the name and address of their employer, or

(ii)if they are not an employee, their address; and

(g)the position, qualifications, certification or experience that qualifies them as a competent person.

(3)After wire rope is tested under section 307, the competent person shall sign and issue a certificate that sets out

(a)a description of the rope;

(b)any identifying marks on the rope;

(c)the name of the manufacturer or supplier of the rope,

(d)the circumference or diameter of the rope, the number of wires per strand, the lay, the quality of the wire and the load at which a sample of the rope broke;

(e)the date of the test;

(f)their name and

(i)if they are an employee, the name and address of their employer, or

(ii)if they are not an employee, their address; and

(g)the position, qualifications or experience that qualifies them as a competent person.

(4)If derricks are tested when operated in union purchase, the competent person shall sign and issue a certificate that sets out

(a)the location and a description of the derricks and the manner in which they are rigged;

(b)any identifying marks on the derricks;

(c)the maximum height of the triangle plate above the hatch coaming or the maximum angle between cargo runners;

(d)the load applied and the angle to the horizontal or the radius at which the load was applied;

(e)the position of outboard and inboard preventer guy attachments;

(f)their name and

(i)if they are an employee, the name and address of their employer, or

(ii)if they are not an employee, their address; and

(g)the position, qualifications or experience that qualifies them as a competent person.

(5)The competent person shall provide the certificate to

(a)in the case of cargo gear that forms part of the equipment of a vessel, the vessel’s master; and

(b)in the case of cargo gear that does not form part of the equipment of a vessel, the gear’s owner.

(6)Despite subsection (1), in the case of a foreign vessel that is entitled to fly the flag of a state that is a party to Convention 152, the certificate may set out the information required by that state.

(7)Certificates shall be attached to the register.

Easily Identifiable Cargo Gear

313 #

Cargo gear shall be easily identifiable from the information set out in any certificate for the gear or from any entry for the gear in a vessel’s register.

Prohibitions on Using Cargo Gear

314 #

(1)If a person does not produce the register when directed to do so under paragraph 211(4)(e) of the Act, cargo gear that should be listed in the register shall not be used until it is produced.

(2)If the certificates for any cargo gear that should be listed in the register are not attached to it when it is produced, that cargo gear shall not be used until the certificates are produced or the cargo gear is tested or thoroughly examined.

Reporting Changes

315 #

If a person is directed under paragraph 211(4)(e) of the Act to produce the register, on production of the register, the person shall report any change in the cargo gear listed in the register since it was last tested that could adversely affect the results of that test.

Preservation

316 #

The register and certificates shall be kept on board the vessel or at the cargo gear owner’s premises, as the case may be, for at least five years after the date of the most recent entry in the register.

Safety Factors

317 #

(1)The safety factors set out in or determined in accordance with any of the following shall be adopted as a minimum in the manufacture of the articles set out in column 1 of Schedule 6:

(a)column 2;

(b)the regulations, rules or codes of a classification society;

(c)if the article is a part of a lifting appliance that is operated onshore or on a restricted vessel,

(i)the regulations of the province in which the appliance is being operated,

(ii)the standards of the International Standards Organization, or

(iii)the standards of the Deutsches Institut für Normung e. V. (DIN); or

(d)in the case of wire rope that is part of a lifting appliance that is operated onshore or on a restricted vessel, paragraph E.1.2 of Appendix E to Safety and Health in Ports.

(2)Cargo gear shall not be used when, because of wear, corrosion or other reasons, the safety factor of any part of it is less than 80% of the safety factor adopted in its manufacture.

Safe Working Loads

Exceeding Safe Working Loads

318 #

(1)No lifting appliance shall be loaded beyond its safe working load.

(2)The resultant load on main accessory gear or loose gear used with a lifting appliance shall not exceed the safe working load of the gear.

(3)Single-sheave pulley blocks may be used in any position where the maximum resultant load on the head fitting is not more than twice the safe working load engraved or stamped on the block.

Determining Safe Working Loads

Derricks

319 #

In each case referred to in subsections 323(2) and (3), the safe working load shall be determined for the lowest working angle of the boom shown in the rigging plan for the derrick.

Loose Gear — General

320 #

(1)The safe working load of loose gear shall be determined by an expert person testing a prototype of the gear to destruction.

(2)Despite subsection (1), the safe working load of specially designed spreader beams, lifting frames and lifting clamps shall be determined by an expert person using design calculations.

Slings

321 #

(1)The safe working load of slings that are not used in a straight vertical lift configuration or as one-legged slings shall be determined in accordance with sections 5.3.1.2 to 5.3.1.6 of Safety and Health in Ports.

(2)The safe working load of a synthetic webbing sling shall be determined in a manner that takes into account any potential loss of strength caused by the stress introduced by the interaction of the cargo hook intended to be used with the sling.

Wire Rope

322 #

The safe working load of a wire rope is one fifth of the breaking strength of the sample tested under section 307.

Marking or Indicating Safe Working Loads

Lifting Appliances

323 #

(1)Every lifting appliance, other than a category 4 lifting appliance, shall have its safe working load clearly marked on it.

(2)If only one safe working load is marked on a derrick, it shall be the safe working load with single purchase only. If two safe working loads are marked, the first shall be the safe working load with single purchase and the second shall be the safe working load with double purchase.

(3)If a certificate has been issued under subsection 312(4) in respect of a derrick tested when operated in union purchase, the safe working load shall be marked with the letters “SWL(U)” or “CMU(CV)” to indicate that it is the safe working load for operation in union purchase.

Main Accessory Gear

324 #

Main accessory gear shall have its safe working load clearly marked on it.

Pulley Blocks

325 #

Every pulley block shall have its safe working load permanently engraved or stamped on it.

Slings

326 #

The safe working load of slings in a straight vertical lift configuration shall be indicated as follows:

(a)in the case of chain slings, by marking them in figures or letters on the sling or on a tablet or ring of durable material attached securely to the sling;

(b)in the case of wire-rope slings and reusable natural- or synthetic-fibre rope or webbing slings, as specified in paragraph (a) or by stating the safe working loads for the various sizes of slings used on a notice and exhibiting it so that it can be easily read by persons using the slings;

(c)in the case of disposable webbing slings, by marking the slings with a “U” or the word “DISPOSABLE” or “JETABLE”; and

(d)in the case of disposable stranded rope slings, by using marker yarns or other means that identify the slings with their certificates issued under subsection 312(2).

Reduction of Safe Working Loads

327 #

(1)When a lifting appliance is operated on a vessel that is not sheltered from the action of waves, its safe working load shall be considered to be reduced

(a)as provided for in a table provided by its manufacturer with respect to the safe working load to be adopted under those conditions; or

(b)if the manufacturer has not provided the table and the visually determined vertical range between the hook and the load attachment point resulting from the vessel’s motion in the waves is within the range set out in column 1 of the table to this paragraph, by the percentage set out in column 2.

| Column 1 | Column 2Item | Range (m) | Reduction to SWL (%)1 | 0.2 – 0.5 | 302 | 0.5 – 1.5 | 503 | 1.5 – 2.5 | 70

(2)A copy of the table referred to in paragraph (1)(a) or (b), as the case may be, shall be posted at a location that is visible from the appliance’s control position.

(3)Subsections (1) and (2) do not apply if the appliance automatically compensates for the vessel’s motion in waves.

Rigging Plans

328 #

(1)A rigging plan and any other information necessary to safely rig the lifting appliances installed on a vessel shall be kept on board the vessel.

(2)The rigging plan shall show

(a)the position of the pulley blocks and guys;

(b)the resultant load on pulley blocks, guys, wire ropes and booms;

(c)any identifying marks on main accessory gear or loose gear; and

(d)the working range of the appliances.

(3)An additional rigging plan shall be kept on board the vessel if lifting appliances installed on the vessel are coupled in any combination to each other or to other lifting appliances. The additional rigging plan shall show the information set out in subsection (2) for the manner in which the appliances are coupled.

(4)The lifting appliances shall be rigged in accordance with the rigging plan and, if applicable, the additional rigging plan.

Derricks

Operation in Union Purchase

329 #

(1)If a derrick is marked with a safe working load for operation in union purchase under subsection 323(3), a stress diagram or position-setting data shall be provided to the operator of the derrick.

(2)If two derricks are operated in union purchase but are not marked under subsection 323(3),

(a)the derricks shall both be rigged in single purchase or both be rigged in double purchase;

(b)the load lifted shall not be in excess of one-half the safe working load of the derricks as rigged; and

(c)the angle formed by the cargo runners shall not exceed 120°.

330 #

If opposite sets of derricks are rigged for operation in union purchase so that both the inner and outer derricks are served by common runners with running pulley blocks on them and the blocks are shackled to the lifting hook, the safe working load is twice the safe working load with single purchase of the set of derricks with the smaller safe working load.

Boom Angle

331 #

If a derrick’s boom is tested at an angle exceeding 15° above the horizontal, the angle at which it was tested shall be marked on it and the boom shall not be operated at a lower angle.

Guys

332 #

(1)A derrick with a fixed boom shall, unless the special design of the derrick renders preventer guys unnecessary, be fitted with preventer guys that are

(a)secured to the head of the boom and independent of other fittings;

(b)made from wire or chains; and

(c)strong enough to take working stresses without assistance from the derrick’s fibre guys.

(2)A derrick’s guys shall be secured only to eye pads or other fittings that are sufficiently strong to withstand the working stresses.

Preventing Accidental Lifting

333 #

No derrick shall be used unless measures have been taken to prevent the foot of the derrick from being accidentally lifted out of its socket or support.

Category 4 Lifting Appliances on Canadian Vessels Other Than Restricted Vessels

Application

334 #

Sections 335 to 341 apply in respect of category 4 lifting appliances on Canadian vessels that are not restricted vessels.

General

335 #

(1)A category 4 lifting appliance shall not be used unless

(a)its manufacturer has specified conditions for its operation on a vessel, such as

(i)the maximum heel that may occur in the direction of the boom,

(ii)the maximum side load, if any, to which it may be exposed, expressed in terms of the angle that the cable may make normal to the plane of the boom, and

(iii)the manner in which it is to be secured to the vessel to ensure the appliance’s stability and safety;

(b)it is operated in accordance with the specified conditions;

(c)when the appliance is operated on a vessel, its authorized representative has the manufacturer’s load radius chart for the safe working load of the appliance;

(d)the Department of Transport Marine Safety Office nearest to the vessel has been provided with

(i)a drawing that indicates the details of the installation, including how and where on the vessel the appliance is secured,

(ii)sufficient information to demonstrate that the points at which the appliance is secured and the supporting structure would be sufficiently strong to withstand the resulting loads on the structure if the appliance were used to lift the maximum load at the maximum radius at which it was tested under subsection 303(1), and

(iii)sufficient stability data to demonstrate that the vessel constitutes a safe platform for the appliance when it is being used.

(2)Despite subsection (1), a category 4 lifting appliance may be used if

(a)its design and its installation on the vessel are approved by a classification society in accordance with its regulations, rules or codes;

(b)after it is tested under paragraph 303(1)(a), a certificate referred to in subsection 312(1) is signed by a surveyor employed by the classification society;

(c)it is operated in accordance with any conditions specified by the classification society in accordance with its regulations, rules or codes; and

(d)the classification society has provided the authorized representative with a load radius chart for the safe working load of the appliance when operated on a vessel.

Load Moment Indicator Systems

336 #

(1)A load moment indicator system that meets the requirements set out in Schedule 7 shall be installed on a category 4 lifting appliance unless it

(a)handles bulk commodities or cargo by means of a magnet or a clamshell bucket; or

(b)is used to handle or hold hoses in connection with the transfer of bulk liquids or other products handled by hoses.

(2)A manufacturer’s manual that contains the instructions for the operation and maintenance of the system shall be available to the operator of the appliance.

(3)A certificate or document that sets out the following and is issued by the installer of the system shall be attached to the register referred to in section 311:

(a)the model numbers and serial numbers of the appliance and the system; and

(b)confirmation that the system is in good working order after installation and that the values indicated on the load radius chart for the appliance are correctly indicated by the system.

(4)The operator of the appliance and the officer in charge of material handling shall have successfully completed training in the safe operation of the system and shall each hold a certificate or document furnished by his or her employer or the company that installed the system attesting to the successful completion of the training.

^note

Installation

337 #

(1)A category 4 lifting appliance shall not be used unless it is installed by securing it to the vessel with anti-tipping lashings at four points in a manner that does not jeopardize the watertight integrity of the vessel.

(2)On any open sea passage, a category 4 lifting appliance shall be lashed and chocked as well as secured to the vessel with anti-tipping lashings.

^note

Safe Navigation

338 #

A category 4 lifting appliance shall not obstruct the visibility from the navigation bridge or otherwise impair the safe navigation of the vessel.

Use of Appliances

339 #

A vessel’s master shall ensure that

(a)a category 4 lifting appliance is not used to lift

(i)a load that exceeds the maximum load with which it was tested in accordance with subsection 6(1) of Schedule 4, or

(ii)a load at a radius greater than the maximum radius at which it was tested in accordance with subsection 6(1) of Schedule 4;

(b)when a category 4 lifting appliance is used, the vessel does not heel more than 5° or any lower angle that is set out in the conditions specified by the manufacturer or the classification society, as the case may be; and

(c)if there are tanks containing liquids on the vessel, the effects of free surface in the tanks are taken into consideration when a category 4 lifting appliance is used and are minimized when it is used to lift loads that could cause the vessel to heel more than 2°.

Placards

340 #

A durable placard that sets out the following in clearly legible letters and figures shall be securely fixed to a category 4 lifting appliance’s cab in a location easily visible to an operator seated at the control position:

(a)the load radius chart for the safe working load of the appliance when operated on a vessel;

(b)the appliance’s model number and serial number;

(c)the length of the appliance’s boom; and

(d)any conditions specified by the manufacturer or the classification society, as the case may be.

Inspection and Maintenance

341 #

(1)Category 4 lifting appliances shall be inspected and maintained in accordance with the manufacturer’s recommendations.

(2)The requirements of clauses 4.1 to 4.3, 4.5 and 4.6 of the Safety Code on Mobile Cranes shall be met in respect of mobile cranes.

(3)For the purposes of subsection (2),

(a)the reference to “owner” in clauses 4.2.1.1, 4.3.1 and 4.6.2.1 of the Safety Code on Mobile Cranes shall be read as a reference to “the authorized representative of the vessel on which the crane is installed”; and

(b)the wording of clause 4.2.1.2 of the Safety Code on Mobile Cranes shall be replaced by the following: “The log shall be kept on board the vessel on which the crane is installed.”

Category 4 Lifting Appliances Onshore or on Restricted Vessels

Application

342 #

Sections 343 to 346 apply in respect of category 4 lifting appliances onshore or on restricted vessels in Canadian waters.

Load Moment Indicator Systems

343 #

(1)A load moment indicator system that meets the requirements set out in Schedule 7 shall be installed on a category 4 lifting appliance unless it

(a)handles bulk commodities or cargo by means of a magnet or a clamshell bucket;

(b)is used to handle or hold hoses in connection with the transfer of bulk liquids or other products handled by hoses;

(c)is used exclusively to handle material if the total gross mass of a load never exceeds 5 tonnes and the gross mass of every package and of every article of unpackaged material is marked on the package or the article, as the case may be; or

(d)is a gantry-type crane that is being used within its capacity limits to handle containers known to be and identified as empty or loaded or to handle other loads by means of a lifting beam supplied by the crane’s manufacturer to be used with the crane.

(2)A manufacturer’s manual that contains the instructions for the operation and maintenance of the system shall be available to the operator of the appliance.

(3)A certificate or document that sets out the following and is issued by the installer of the system shall be attached to the register referred to in section 311:

(a)the model numbers and serial numbers of the appliance and the system; and

(b)confirmation that the system is in good working order after installation and that the values indicated on the load radius chart are correctly indicated by the system.

(4)The operator of the appliance shall have successfully completed training in the safe operation of the system and shall hold a certificate or document furnished by his or her employer or the installer of the system attesting to the successful completion of the training.

Use of Lifting Appliances

344 #

The operator of a category 4 lifting appliance shall not use it to lift

(a)a load that exceeds the maximum load with which it was tested in accordance with subsection 6(2) of Schedule 4; or

(b)a load at a radius greater than the maximum radius at which it was tested in accordance with subsection 6(2) of Schedule 4.

Placards

345 #

(a)the load radius chart for the safe working load of the appliance;

(b)the appliance’s model number and serial number;

(c)the length of the appliance’s boom; and

(d)any conditions specified by the manufacturer.

Inspection and Maintenance

346 #

(1)Category 4 lifting appliances shall be inspected and maintained in accordance with the manufacturer’s recommendations.

(2)The requirements of clauses 4.1 to 4.3, 4.5 and 4.6 of the Safety Code on Mobile Cranes shall be met in respect of mobile cranes.

Mechanical, Electrical, Gearing, Hydraulic and Pneumatic Systems

347 #

The mechanical, electrical, gearing, hydraulic and pneumatic systems that are part of a lifting appliance shall

(a)meet design standards at least equivalent to

(i)if the lifting appliance is operated on board a foreign vessel, design standards approved by the government of the state whose flag the vessel is entitled to fly,

(ii)if the lifting appliance is operated onshore or on a restricted vessel, those set out in

(A)the regulations of the province in which the appliance is being operated,

(B)the standards of the International Standards Organization, or

(C)the standards of the Deutsches Institut für Normung e. V. (DIN), or

(iii)in any other case, the regulations, rules or codes of a classification society; and

(b)be suitably protected or constructed for the environment in which they are likely to be used.

Rope

348 #

(1)Rope shall not be used unless

(a)it is free from patent defects;

(b)it is used in accordance with the manufacturer’s recommendations;

(c)it is made of one continuous length;

(d)in the case of wire rope, it meets the requirements of sections 4.4.3.1 and 4.4.3.8 of Safety and Health in Ports; and

(e)in the case of wire rope that has a splice in it and is used in the raising or lowering of a load that could rotate, the splice prevents the lay of the wire from opening.

(2)Wire clips shall not be used to form a terminal joint in a wire rope unless the rope is used in standing gear and the clips are fitted in accordance with their manufacturer’s recommendations.

(3)Wire rope shall not be used on a category 1 lifting appliance, a mobile crane on a vessel or a category 5 lifting appliance installed on a vessel if the rope is

(a)anti-rotation or torqueless left-handed laid wire rope of 4 × 29 construction with strands composed of one core wire, seven inner wires, seven filler wires and 14 outer wires, if the core wire or the inner wires have a greater diameter than that of the outer wires; or

(b)of essentially the same design as the rope described in paragraph (a).

(4)Rope made of fibre interspersed with wire strand shall not be used on the main hoist of a lifting appliance.

^note

Thread Diameter of Sheaves

349 #

(1)If a wire rope is used on a lifting appliance referred to in column 1 of Schedule 8, the thread diameter of a sheave that is used with the rope shall be not less than

(a)the diameter set out in column 2 if the rope is used as a running rope; or

(b)the diameter set out in column 3 if the rope is used as a fixed span rope.

(2)Despite subsection (1), if the manufacturer of the rope has recommended a thread diameter of a sheave that is greater than that required by subsection (1), the thread diameter of the sheave shall be not less than that recommended by the manufacturer.

Pallets

350 #

(1)Pallets shall be of adequate strength for the use for which they are proposed and free from visible defects that would likely affect their safe use.

(2)Pallets that are used in conjunction with bar bridles shall have a lip of at least 75 mm.

Mobile Elevating Work Platforms

351 #

Mobile elevating work platforms that are not lifting appliances shall meet the requirements of any regulations of the province in which they are being operated.

Forklift Trucks

352 #

(1)The lifting capacity of a forklift truck that is specified by the manufacturer in terms of mass and distance from the mast

(a)shall be marked on the truck in a readily visible location; and

(b)shall not be increased by adding counterweights or by any other means.

(2)The mass of the truck and of any counterweights, as well as their total mass, shall be marked on a forklift truck in a readily visible location.

^note

Wrought Iron Loose Gear

353 #

Loose gear made of wrought iron shall not be used.

Repairs

354 #

(1)Repairs that involve the heating, fairing or welding of structural stress-bearing parts of lifting appliances and repairs to loose gear shall be performed by an expert person.

(2)Webbing slings shall not be repaired.

Structural and Control Safety Measures

Eliminating the Possibility of Dangerous Contact

355 #

(1)Chain and friction drives, cog wheels, electric conductors, gearing, motors, shafting, sheaves and steam pipes that are part of cargo gear shall be covered, shielded, fenced, enclosed or otherwise protected by covers or casings, barriers, guardrails, screens, mats or platforms to eliminate the possibility of dangerous contact by persons or objects.

(2)Subsection (1) does not apply in respect of parts that are, by their position or construction, as safe as if they were protected as required by that subsection.

Reducing Risk of Accidental Descent

356 #

(1)Cranes and winches shall be provided with means that minimize the risk of the accidental raising or lowering of a load.

(2)For the purpose of subsection (1),

(a)the lever that is used to raise or lower the load shall

(i)raise the load when moved back or towards the operator,

(ii)lower the load when moved forward or away from the operator, and

(iii)return to the neutral position when released by an operator;

(b)a lever that controls the link motion reversing gear of a crane or winch shall be provided with a spring or other locking arrangement; and

(c)the motion of the slew control and the resultant direction of the slew shall be consistent.

^note

Use of Lifting Appliances with Limit Switches

357 #

(1)If limit switches are provided on a lifting appliance, the appliance shall not be used unless the switches are in good working order.

(2)Limit switches shall not be left in the by-pass condition when the appliance is in operation.

Equipment for Lifting Appliances

358 #

(1)Lifting appliances shall have an emergency stop button at the operator’s position.

(2)A lifting appliance’s machinery shall have a means for promptly cutting off its power in the event of an emergency.

(3)A category 2 lifting appliance shall have

(a)an adjustable automatic slow-down device on the lowering function; and

(b)an indicator specifying the overrun to be expected under normal working conditions.

(4)If wind speed is a limiting condition for the use of a lifting appliance, the appliance shall have an anemometer that

(a)is located on a part of the appliance that is exposed to the wind; and

(b)has a read-out in the operator’s cab or, in the case of a self-unloading vessel, on the bridge or in the control room of the vessel.

Control of Steam

359 #

If workers are present, exhaust steam and, so far as is feasible, live steam from a crane or winch shall not obscure any part of the decks, gangways, stages or wharves.

Report of Accident or Incident

360 #

(1)If a serious accident or incident occurs involving a lifting appliance that is part of a vessel’s equipment, the vessel’s master shall immediately report the accident or incident to the Department of Transport Marine Safety Office nearest to the accident or incident by the quickest means available.

(2)If a serious accident or incident occurs involving a lifting appliance that is not part of a vessel’s equipment, the appliance’s owner shall immediately report the accident or incident to the Department of Transport Marine Safety Office nearest to the accident or incident by the quickest means available.

^note

Unitized Cargo

361 #

(1)Unitized cargo shall not be lifted by using the material that unitizes the cargo unless the material is wire banding or flat steel strapping.

(2)The mass of unitized cargo lifted by using wire banding or flat steel strapping that unitizes the cargo shall not exceed the mass determined by the formula A/B

(3)Subject to paragraph (4)(b),

(a)if the banding or strapping is for a single lift, the minimum safety factor shall be 3.5; and

(b)if the banding or strapping is for multiple lifts, the minimum safety factor shall be 4.

(4)If the banding or strapping is not designed to be vertical during lifting,

(a)the banding or strapping shall provide for a bridle angle of at least 40°; and

(b)the minimum safety factor shall be obtained by the formula A × 1/2B

(5)In subsection (4), bridle angle means the maximum angle between the vertical at one of the top corners of the unitized cargo and the banding or strapping during lifting.

362 #

(1)This section applies in respect of wire banding or flat steel strapping that unitizes cargo when the unitized cargo is lifted using the banding or strapping.

(2)If the banding or strapping is for a single lift, it shall not be used to lift the unitized cargo more than once.

(3)If the banding or strapping is for multiple lifts, it shall not be used

(a)to lift the unitized cargo more than four times; or

(b)more than four months after the first time it is used.

(4)The banding or strapping shall not be used to lift the unitized cargo for more than four minutes at a time or any longer period that is necessary to complete the lift.

(5)The banding or strapping shall be used to lift the unitized cargo only in accordance with the lifting method indicated on the certificate under paragraph (8)(i).

(6)The knot strength of wire banding shall be at least 90% of the breaking strength of the wires.

(7)The banding or strapping shall be accompanied by a certificate that is signed by the person responsible for unitizing the cargo, that certifies the breaking strength and the safety factor of the banding or strapping and that

(a)in the case of banding, the strength of joints was tested at least once for every 1 000 tonnes of cargo unitized and at least three times for every consignment;

(b)in the case of strapping, the strength of joints was tested at least once for every 300 units; and

(c)in the case of multiple-use banding or strapping, the banding or strapping meets the requirements of section 30 of Unitized Cargo Standard, TP 11232, published by the Department of Transport, or equivalent requirements.

(8)The certificate shall also set out

(a)whether the material used to unitize the cargo is wire banding or flat steel strapping;

(b)whether the banding or strapping is single-lift or multiple-lift;

(c)the plant, warehouse or other location at which the banding or strapping was fitted on the cargo;

(d)any identifying marks on the banding or strapping;

(e)a description of the cargo;

(f)the number of units of cargo that the certificate covers;

(g)the approximate mass of the units;

(h)the unitizing system used;

(i)the lifting method that should be used, including the number and type of hooks or other lifting devices and the bridle angle, if any;

(j)in the case of banding,

(i)the number of bands fitted on each unit and how many times each band is wrapped around a unit,

(ii)the diameter and breaking strength of the wires in the banding, and

(iii)the type of knot used to tie the banding and the breaking strength of the knot;

(k)in the case of strapping,

(i)the number of straps fitted on each unit,

(ii)the width, thickness and breaking strength of the straps, and

(iii)the type and number of seals and their location and breaking strength; and

(l)if the banding or strapping has been used to lift unitized cargo, the date of the lift and the name of the vessel and of the port, if any, involved.

Division 2 — Access Equipment

Shore-based Power-operated Ramps

363 #

(1)The owner of a shore-based power-operated ramp that is constructed one year or more after the coming into force of this section shall ensure that the requirements of CAN/CSA Standard S826.1-01, Ferry Boarding Facilities, other than Appendices A to D, that apply in respect of the ramp are met.

(2)The owner, as defined in CAN/CSA Standards S826.3-01 and S826.4-01, Ferry Boarding Facilities, of a shore-based power-operated ramp shall ensure that it is maintained and inspected in accordance with the requirements of those Standards.

Accommodation Ladders

364 #

(1)The authorized representative of a vessel shall ensure that every accommodation ladder fitted on the vessel and the vessel’s support and suspension points for the ladder meet

(a)the requirements of ISO Standard 5488, Shipbuilding — Accommodation Ladders or of a classification society; or

(b)if the ladder is part of pilot transfer equipment referred to in regulation 23 of Chapter V of SOLAS, the requirements of the annex to IMO Resolution A.889(21), Pilot Transfer Arrangements.

(2)Every accommodation ladder fitted on the vessel and the vessel’s support and suspension points for the ladder shall be thoroughly examined by a competent person at least once every year.

(3)An accommodation ladder passes the examination if

(a)certificates have been issued under section 312 for the loose gear used with the ladder;

(b)the parts that align and swivel under load are free;

(c)the mechanical, electrical. gearing, hydraulic and pneumatic systems are in good working order;

(d)parts are not affected by corrosion to the extent that they cannot be opened; and

(e)no defects or signs of permanent deformation are detected.

(4)The vessel’s support and suspension points for the ladder pass the examination if no defects or signs of permanent deformation are detected.

(5)The ladder shall not be used if it and the vessel’s support and suspension points for it did not pass the most recent examination.

(6)The competent person shall provide the authorized representative with a record of the examination, including measurements taken at intervals not exceeding five years of any corrosion, deformation or significant wear in structural or moving parts.

(7)The record shall be kept on board the vessel.

^note

Report of Accident or Incident

365 #

(1)If a serious accident or incident occurs involving a shore-based power-operated ramp, the owner, as defined in CAN/CSA Standards S826.3-01 and S826.4-01, Ferry Boarding Facilities, of the ramp shall immediately report the accident or incident to the Department of Transport Marine Safety Office nearest to the accident or incident by the quickest means available.

(2)If a serious accident or incident occurs involving an accommodation ladder fitted on a vessel, the vessel’s master shall immediately report the accident or incident to the Department of Transport Marine Safety Office nearest to the accident or incident by the quickest means available.

Part 4 · Consequential Amendments, Repeals and Coming into Force

Consequential Amendments to the Tackle Regulations

400 #

[Amendment]

401 #

[Amendment]

402 #

[Amendment]

403 #

[Amendment]

404 #

[Amendment]

Repeals

405 #

[Repeal]

406 #

[Repeal]

407 #

[Repeal]

408 #

[Repeal]

409 #

[Repeal]

Coming into Force

*410 #

(1)These Regulations, except section 364, come into force on the day on which section 2 of the Canada Shipping Act, 2001, chapter 26 of the Statutes of Canada, 2001, comes into force.

(2)Section 364 comes into force one year after the day on which section 2 of the Canada Shipping Act, 2001, chapter 26 of the Statutes of Canada, 2001, comes into force.

Schedule 1 · (Subsection 203(1))

Schedule 2 · (Subsections 203(2), 211(2), 212(5), 226(4), 231(6) and 237(3))

Schedule 3 · Fumigation Sign (Subparagraph 210(1)(b)(i))

Schedule 4 · Testing of Lifting Appliances (Subsections 303(1) and (2), paragraph 339(a) and section 344)

1 #

(1)A category 1 lifting appliance, category 2 lifting appliance or category 3 lifting appliance with an SWL of 20 tonnes or less shall be tested with a load equal to 125% of its SWL.

(2)A category 1 lifting appliance, category 2 lifting appliance or category 3 lifting appliance with an SWL of more than 20 tonnes but not more than 50 tonnes shall be tested with a load equal to its SWL plus 5 tonnes.

(3)A category 1 lifting appliance, category 2 lifting appliance or category 3 lifting appliance with an SWL of more than 50 tonnes shall be tested with a load equal to 110% of its SWL.

(4)A category 5 lifting appliance shall be tested assembled with its accessory gear with a load equal to 110% of the working load of the assembled appliance.

2 #

During the testing of a category 1 lifting appliance, category 2 lifting appliance or category 3 lifting appliance,

(a)the load shall be lifted with the lifting appliance at an angle that is not more than 15° from the horizontal or at the lowest feasible working angle; and

(b)the load shall be swung as far as possible in both directions after it has been lifted.

3 #

A lifting appliance, other than a mobile crane, with a jib that has a variable radius shall be tested with the load at the maximum and minimum radii of the jib.

4 #

A lifting appliance designed to articulate, telescope and elevate under full-load conditions shall be tested with the load over its full operational range.

5 #

(1)Subject to subsection (2), the test shall be carried out using a dead load.

(2)A spring or hydraulic balance may be used for the test instead of a dead load if

(a)the appliance is not rigged for union purchase and is being tested after the renewal, modification or repair of a stress-bearing part other than a part of the brake system;

(b)a dead load is not available for the test;

(c)the balance was calibrated by a competent person not more than 12 months before the test; and

(d)the indicator on the balance remains constant for at least five minutes during the test.

6 #

(1)A category 4 lifting appliance that is to be used on a vessel that is not a restricted vessel shall be tested

(a)on the vessel or onshore

(i)at its maximum and minimum radii, and at one or more of its intermediate radii, with a load equal to its SWL on a vessel at those radii, or

(ii)at its maximum and minimum projected radii while on board the vessel with a load less than or equal to its SWL on a vessel at those radii; and

(b)on completion of installation on a vessel, over its full operational range on the vessel at at least the maximum radius at which it was tested under paragraph (a) with at least the load with which it was tested under that paragraph.

(2)A category 4 lifting appliance that is to be used onshore or on a restricted vessel shall be tested

(a)over its full operational range at its maximum radius at base-boom length with at least 100% of the maximum weight permitted by the manufacturer’s load rating chart at that radius; and

(b)over its full operational range

(i)at its maximum and minimum radii, and at one or more of its intermediate radii, with a load equal to its SWL at those radii, or

(ii)at its maximum and minimum projected radii with a load less than or equal to its SWL at those radii.

Schedule 5 · (Subsection 305(1))

Schedule 6 · (Subsection 317(1))

Schedule 7 · Load Moment Indicator Systems (Subsections 336(1) and 343(1))

1 #

A load moment indicator system installed on a category 4 lifting appliance shall

(a)use the same type of measuring units that the load radius chart uses;

(b)clearly indicate the measuring units used;

(c)give a clear and precise indication of

(i)the lifting capacity of the appliance,

(ii)the total weight suspended,

(iii)the elevated angle of the boom, and

(iv)the radius of the boom;

(d)be clearly visible so that an operator seated at the control position can easily read the indications during both day and night conditions;

(e)be resistant to magnetic influence, weather, shock and vibration;

(f)have a visual system that

(i)warns the operator when 85% of the appliance’s SWL has been reached, and

(ii)does not create an operational hazard; and

(g)have a visual and audible system in the interior of the cab and an exterior audible system that

(i)warns the operator when 98% of the appliance’s SWL has been reached,

(ii)does not create an operational hazard, and

(iii)in the case of the audible signal, is identifiable by the operator despite ambient and machinery noise.

2 #

A load moment indicator system that is installed on a category 4 lifting appliance on a Canadian vessel that is not a restricted vessel shall

(a)give a clear and precise indication of the angles of heel and trim and of the reduced lifting capacity for those angles;

(b)be clearly visible so that an operator seated at the control position can easily read the indication during both day and night conditions;

(c)have an automatic emergency braking system that prevents freefall of the load without jolting in the event of overload; and

(d)have a manual control to bypass the automatic emergency braking system that is accessible to an operator seated at the control position and is protected against accidental operation.

Schedule 8 · (Subsection 349(1))

| Column 1 | Column 2 | Column 3Item | Lifting Appliance | Running Rope | Fixed Span Rope1 | Derrick | 14 d | 10 d2 | Vehicle ramp | 300 dw | 3 | Crane | 19 d | 10 d4 | Derrick crane | 19 d | 10 d5 | Elevator | 19 d | 10 d6 | Other lifting appliance | 400 dw | d = diameter of the ropedw = diameter of the largest component wire in the rope

Related provisions

— SOR/2021-60, s. 11Any document that was issued by the Minister of Transport to a shipper following an initial verification of the shipper’s procedures for sampling, testing and controlling the moisture content of cargo before the day on which these Regulations come into force is deemed to be a letter of approval issued under paragraph 115.1(4)(a) of the Cargo, Fumigation and Tackle Regulations.Any document that was issued by the Minister of Transport to a shipper following a verification of modifications to the shipper’s procedures for sampling, testing and controlling the moisture content of cargo before the day on which these Regulations come into force is deemed to be a letter of approval issued under paragraph 115.1(4)(a) of the Cargo, Fumigation and Tackle Regulations.Any document that was endorsed by the Minister of Transport following an intermediate verification of the shipper’s procedures for sampling, testing and controlling the moisture content of cargo before the day on which these Regulations come into force is deemed to be a letter of approval endorsed under paragraph 115.1(4)(b) of the Cargo, Fumigation and Tackle Regulations.Any document that was issued by the Minister of Transport to a shipper following a renewal verification of the shipper’s procedures for sampling, testing and controlling the moisture content of cargo before the day on which these Regulations come into force is deemed to be a letter of approval issued under paragraph 115.1(4)(c) of the Cargo, Fumigation and Tackle Regulations.

Federal laws of Canada reproduced under the Reproduction of Federal Law Order (SI/97-5); not the official version. Source: Justice Laws Website.