Contents
- 178.1 Purpose and scope.
- 178.1000 Purpose and scope.
- 178.1005 Flexible Bulk Container identification code.
- 178.1010 Marking of Flexible Bulk Containers.
- 178.1015 General Flexible Bulk Container standards.
- 178.1020 Period of use for transportation of hazardous materials in Flexible Bulk Containers.
- 178.1030 Purpose and scope.
- 178.1035 General requirements.
- 178.1040 Preparation of Flexible Bulk Containers for testing.
- 178.1045 Drop test.
- 178.1050 Top lift test.
- 178.1055 Stacking test.
- 178.1060 Topple test.
- 178.1065 Righting test.
- 178.1070 Tear test.
- 178.2 Applicability and responsibility.
- 178.251-178.253-5 -178.253-5 [Reserved]
- 178.255 Specification 60; steel portable tanks.
- 178.255-1 -1 General requirements.
- 178.255-10 -10 Lining.
- 178.255-11 -11 Tank mountings.
- 178.255-12 -12 Pressure test.
- 178.255-13 -13 Repair of tanks.
- 178.255-14 -14 Marking.
- 178.255-15 -15 Report.
- 178.255-2 -2 Material.
- 178.255-3 -3 Expansion domes.
- 178.255-4 -4 Closures for manholes and domes.
- 178.255-5 -5 Bottom discharge outlets.
- 178.255-6 -6 Loading and unloading accessories.
- 178.255-7 -7 Protection of valves and accessories.
- 178.255-8 -8 Safety devices.
- 178.255-9 -9 Compartments.
- 178.273 Approval of Specification UN portable tanks.
- 178.274 Specifications for UN portable tanks.
- 178.275 Specification for UN Portable Tanks intended for the transportation of liquid and solid hazardous materials.
- 178.276 Requirements for the design, construction, inspection and testing of portable tanks intended for the transportation of non-refrigerated liquefied compressed gases.
- 178.277 Requirements for the design, construction, inspection and testing of portable tanks intended for the transportation of refrigerated liquefied gases.
- 178.278 Alternative requirements for the design, construction, inspection, and testing of portable tanks intended for the transportation of refrigerated liquefied gases.
- 178.3 Marking of packagings.
- 178.301 Alternative requirements for the design, construction, inspection and testing of cargo tank motor vehicles.
- 178.318 Specification MC 201; container for detonators and percussion caps.
- 178.318-1 -1 Scope.
- 178.318-2 -2 Container.
- 178.318-3 -3 Marking.
- 178.320 General requirements applicable to all DOT specification cargo tank motor vehicles.
- 178.33 Specification 2P; inner nonrefillable metal receptacles.
- 178.33-1 -1 Compliance.
- 178.33-2 -2 Type and size.
- 178.33-3 -3 Inspection.
- 178.33-4 -4 Duties of inspector.
- 178.33-5 -5 Material.
- 178.33-6 -6 Manufacture.
- 178.33-7 -7 Wall thickness.
- 178.33-8 -8 Tests.
- 178.33-9 -9 Marking.
- 178.337 Specification MC 331; cargo tank motor vehicle primarily for transportation of compressed gases as defined in subpart G of part 173 of this subchapter.
- 178.337-1 -1 General requirements.
- 178.337-10 -10 Accident damage protection.
- 178.337-11 -11 Emergency discharge control.
- 178.337-12 -12 [Reserved]
- 178.337-13 -13 Supporting and anchoring.
- 178.337-14 -14 Gauging devices.
- 178.337-15 -15 Pumps and compressors.
- 178.337-16 -16 Testing.
- 178.337-17 -17 Marking.
- 178.337-18 -18 Certification.
- 178.337-2 -2 Material.
- 178.337-3 -3 Structural integrity.
- 178.337-4 -4 Joints.
- 178.337-5 -5 Bulkheads, baffles and ring stiffeners.
- 178.337-6 -6 Closure for manhole.
- 178.337-7 -7 Overturn protection.
- 178.337-8 -8 Openings, inlets, and outlets.
- 178.337-9 -9 Pressure relief devices, piping, valves, hoses, and fittings.
- 178.338 Specification MC-338; insulated cargo tank motor vehicle.
- 178.338-1 -1 General requirements.
- 178.338-10 -10 Accident damage protection.
- 178.338-11 -11 Discharge control devices.
- 178.338-12 -12 Shear section.
- 178.338-13 -13 Supporting and anchoring.
- 178.338-14 -14 Gauging devices.
- 178.338-15 -15 Cleanliness.
- 178.338-16 -16 Inspection and testing.
- 178.338-17 -17 Pumps and compressors.
- 178.338-18 -18 Marking.
- 178.338-19 -19 Certification.
- 178.338-2 -2 Material.
- 178.338-3 -3 Structural integrity.
- 178.338-4 -4 Joints.
- 178.338-5 -5 Stiffening rings.
- 178.338-6 -6 Manholes.
- 178.338-7 -7 Openings.
- 178.338-8 -8 Pressure relief devices, piping, valves, and fittings.
- 178.338-9 -9 Holding time.
- 178.33a Specification 2Q; inner nonrefillable metal receptacles.
- 178.33a-1 -1 Compliance.
- 178.33a-2 -2 Type and size.
- 178.33a-3 -3 Inspection.
- 178.33a-4 -4 Duties of inspector.
- 178.33a-5 -5 Material.
- 178.33a-6 -6 Manufacture.
- 178.33a-7 -7 Wall thickness.
- 178.33a-8 -8 Tests.
- 178.33a-9 -9 Marking.
- 178.33b Specification 2S; inner nonrefillable plastic receptacles.
- 178.33b-1 -1 Compliance.
- 178.33b-2 -2 Type and size.
- 178.33b-3 -3 Inspection.
- 178.33b-4 -4 Duties of inspector.
- 178.33b-5 -5 Material.
- 178.33b-6 -6 Manufacture.
- 178.33b-7 -7 Design qualification test.
- 178.33b-8 -8 Production tests.
- 178.33b-9 -9 Marking.
- 178.33c Specification 2P; inner nonrefillable metal receptacle variation.
- 178.33c-1 -1 Compliance.
- 178.33c-2 -2 Variation.
- 178.33d Specification 2Q; inner nonrefillable metal receptacle variations.
- 178.33d-1 -1 Compliance.
- 178.33d-2 -2 Variation 1.
- 178.33d-3 -3 Variation 2.
- 178.340-178.343 -178.343 [Reserved]
- 178.345 General design and construction requirements applicable to Specification DOT 406 (§ 178.346), DOT 407 (§ 178.347), and DOT 412 (§ 178.348) cargo tank motor vehicles.
- 178.345-1 -1 General requirements.
- 178.345-10 -10 Pressure relief.
- 178.345-11 -11 Tank outlets.
- 178.345-12 -12 Gauging devices.
- 178.345-13 -13 Pressure and leakage tests.
- 178.345-14 -14 Marking.
- 178.345-15 -15 Certification.
- 178.345-2 -2 Material and material thickness.
- 178.345-3 -3 Structural integrity.
- 178.345-4 -4 Joints.
- 178.345-5 -5 Manhole assemblies.
- 178.345-6 -6 Supports and anchoring.
- 178.345-7 -7 Circumferential reinforcements.
- 178.345-8 -8 Accident damage protection.
- 178.345-9 -9 Pumps, piping, hoses and connections.
- 178.346 Specification DOT 406; cargo tank motor vehicle.
- 178.346-1 -1 General requirements.
- 178.346-2 -2 Material and thickness of material.
- 178.346-3 -3 Pressure relief.
- 178.346-4 -4 Outlets.
- 178.346-5 -5 Pressure and leakage tests.
- 178.347 Specification DOT 407; cargo tank motor vehicle.
- 178.347-1 -1 General requirements.
- 178.347-2 -2 Material and thickness of material.
- 178.347-3 -3 Manhole assemblies.
- 178.347-4 -4 Pressure relief.
- 178.347-5 -5 Pressure and leakage test.
- 178.348 Specification DOT 412; cargo tank motor vehicle.
- 178.348-1 -1 General requirements.
- 178.348-2 -2 Material and thickness of material.
- 178.348-3 -3 Pumps, piping, hoses and connections.
- 178.348-4 -4 Pressure relief.
- 178.348-5 -5 Pressure and leakage test.
- 178.35 General requirements for specification cylinders.
- 178.350 Specification 7A; general packaging, Type A.
- 178.36 Specification 3A and 3AX seamless steel cylinders.
- 178.37 Specification 3AA and 3AAX seamless steel cylinders.
- 178.38 Specification 3B seamless steel cylinders.
- 178.39 Specification 3BN seamless nickel cylinders.
- 178.42 Specification 3E seamless steel cylinders.
- 178.44 Specification 3HT seamless steel cylinders for aircraft use.
- 178.45 Specification 3T seamless steel cylinder.
- 178.46 Specification 3AL seamless aluminum cylinders.
- 178.47 Specification 4DS welded stainless steel cylinders for aircraft use.
- 178.50 Specification 4B welded or brazed steel cylinders.
- 178.500 Purpose, scope and definitions.
- 178.502 Identification codes for packagings.
- 178.503 Marking of packagings.
- 178.504 Standards for steel drums.
- 178.505 Standards for aluminum drums.
- 178.506 Standards for metal drums other than steel or aluminum.
- 178.507 Standards for plywood drums.
- 178.508 Standards for fiber drums.
- 178.509 Standards for plastic drums and jerricans.
- 178.51 Specification 4BA welded or brazed steel cylinders.
- 178.510 Standards for wooden barrels.
- 178.511 Standards for aluminum and steel jerricans.
- 178.512 Standards for steel, aluminum or other metal boxes.
- 178.513 Standards for boxes of natural wood.
- 178.514 Standards for plywood boxes.
- 178.515 Standards for reconstituted wood boxes.
- 178.516 Standards for fiberboard boxes.
- 178.517 Standards for plastic boxes.
- 178.518 Standards for woven plastic bags.
- 178.519 Standards for plastic film bags.
- 178.520 Standards for textile bags.
- 178.521 Standards for paper bags.
- 178.522 Standards for composite packagings with inner plastic receptacles.
- 178.523 Standards for composite packagings with inner glass, porcelain, or stoneware receptacles.
- 178.53 Specification 4D welded steel cylinders for aircraft use.
- 178.55 Specification 4B240ET welded or brazed cylinders.
- 178.56 Specification 4AA480 welded steel cylinders.
- 178.57 Specification 4L welded insulated cylinders.
- 178.58 Specification 4DA welded steel cylinders for aircraft use.
- 178.59 Specification 8 steel cylinders with porous fillings for acetylene.
- 178.60 Specification 8AL steel cylinders with porous fillings for acetylene.
- 178.600 Purpose and scope.
- 178.601 General requirements.
- 178.602 Preparation of packagings and packages for testing.
- 178.603 Drop test.
- 178.604 Leakproofness test.
- 178.605 Hydrostatic pressure test.
- 178.606 Stacking test.
- 178.607 Cooperage test for bung-type wooden barrels.
- 178.608 Vibration standard.
- 178.609 Test requirements for packagings for infectious substances.
- 178.61 Specification 4BW welded steel cylinders with electric-arc welded seam.
- 178.65 Specification 39 non-reusable (non-refillable) cylinders.
- 178.68 Specification 4E welded aluminum cylinders.
- 178.69 Responsibilities and requirements for manufacturers of UN pressure receptacles.
- 178.70 Approval of UN pressure receptacles.
- 178.700 Purpose, scope and definitions.
- 178.702 IBC codes.
- 178.703 Marking of IBCs.
- 178.704 General IBC standards.
- 178.705 Standards for metal IBCs.
- 178.706 Standards for rigid plastic IBCs.
- 178.707 Standards for composite IBCs.
- 178.708 Standards for fiberboard IBCs.
- 178.709 Standards for wooden IBCs.
- 178.71 Specifications for UN pressure receptacles.
- 178.710 Standards for flexible IBCs.
- 178.74 Approval of MEGCs.
- 178.75 Specifications for MEGCs.
- 178.800 Purpose and scope.
- 178.801 General requirements.
- 178.802 Preparation of fiberboard IBCs for testing.
- 178.803 Testing and certification of IBCs.
- 178.810 Drop test.
- 178.811 Bottom lift test.
- 178.812 Top lift test.
- 178.813 Leakproofness test.
- 178.814 Hydrostatic pressure test.
- 178.815 Stacking test.
- 178.816 Topple test.
- 178.817 Righting test.
- 178.818 Tear test.
- 178.819 Vibration test.
- 178.900 Purpose and scope.
- 178.905 Large Packaging identification codes.
- 178.910 Marking of Large Packagings.
- 178.915 General Large Packaging standards.
- 178.920 Standards for metal Large Packagings.
- 178.925 Standards for rigid plastic Large Packagings.
- 178.930 Standards for fiberboard Large Packagings.
- 178.935 Standards for wooden Large Packagings.
- 178.940 Standards for flexible Large Packagings.
- 178.950 Purpose and scope.
- 178.955 General requirements.
- 178.960 Preparation of Large Packagings for testing.
- 178.965 Drop test.
- 178.970 Bottom lift test.
- 178.975 Top lift test.
- 178.980 Stacking test.
- 178.985 Vibration test.
Contents
3,919 provisions, too many to show on one page. Open a part or section to read it with its history and connections, or search inside the text.
- 178.1 · Purpose and scope.
- 178.1000 · Purpose and scope.
- 178.1005 · Flexible Bulk Container identification code.
- 178.1010 · Marking of Flexible Bulk Containers.
- 178.1015 · General Flexible Bulk Container standards.
- 178.1020 · Period of use for transportation of hazardous materials in Flexible Bulk Containers.
- 178.1030 · Purpose and scope.
- 178.1035 · General requirements.
- 178.1040 · Preparation of Flexible Bulk Containers for testing.
- 178.1045 · Drop test.
- 178.1050 · Top lift test.
- 178.1055 · Stacking test.
- 178.1060 · Topple test.
- 178.1065 · Righting test.
- 178.1070 · Tear test.
- 178.2 · Applicability and responsibility.
- (a) Applicability. (1) The requirements of this part apply to packagings manufactured—
- (b) Specification markings. When this part requires that a packaging be marked with a DOT specification or UN standard marking, marking of the packaging with th
- (c) Notification. (1) Except as specifically provided in §§ 178.337-18, 178.338-19, and 178.345-15 of this part, the manufacturer or other person certifying com
- (e) Definitions. For the purpose of this part— Manufacturer means the person whose name and address or symbol appears as part of the specification markings requ
- (f) No packaging may be manufactured or marked to a packaging specification that was in effect on September 30, 1991, and that was removed from this part 178 by
- (i) Notify each person to whom that packaging is transferred—
- (ii) Retain copies of each written notification for at least one year from date of issuance; and
- 178.251-178.253-5 · -178.253-5 [Reserved]
- 178.255 · Specification 60; steel portable tanks.
- 178.255-1 · -1 General requirements.
- 178.255-10 · -10 Lining.
- 178.255-11 · -11 Tank mountings.
- 178.255-12 · -12 Pressure test.
- 178.255-13 · -13 Repair of tanks.
- 178.255-14 · -14 Marking.
- 178.255-15 · -15 Report.
- 178.255-2 · -2 Material.
- 178.255-3 · -3 Expansion domes.
- 178.255-4 · -4 Closures for manholes and domes.
- 178.255-5 · -5 Bottom discharge outlets.
- 178.255-6 · -6 Loading and unloading accessories.
- 178.255-7 · -7 Protection of valves and accessories.
- 178.255-8 · -8 Safety devices.
- 178.255-9 · -9 Compartments.
- 178.273 · Approval of Specification UN portable tanks.
- 178.274 · Specifications for UN portable tanks.
- 178.275 · Specification for UN Portable Tanks intended for the transportation of liquid and solid hazardous materials.
- 178.276 · Requirements for the design, construction, inspection and testing of portable tanks intended for the transportation of non-refrigerated liquefied compressed gases.
- 178.277 · Requirements for the design, construction, inspection and testing of portable tanks intended for the transportation of refrigerated liquefied gases.
- 178.278 · Alternative requirements for the design, construction, inspection, and testing of portable tanks intended for the transportation of refrigerated liquefied gases.
- 178.3 · Marking of packagings.
- (a) Each packaging represented as manufactured to a DOT specification or a UN standard must be marked on a non-removable component of the packaging with specifi
- (b) A UN standard packaging for which the UN standard is set forth in this part may be marked with the United Nations symbol and other specification markings on
- (c) Where a packaging conforms to more than one UN standard or DOT specification, the packaging may bear more than one marking, provided the packaging meets all
- (d) No person may mark or otherwise certify a packaging or container as meeting the requirements of a manufacturing special permit unless that person is the hol
- 178.301 · Alternative requirements for the design, construction, inspection and testing of cargo tank motor vehicles.
- 178.318 · Specification MC 201; container for detonators and percussion caps.
- 178.318-1 · -1 Scope.
- 178.318-2 · -2 Container.
- 178.318-3 · -3 Marking.
- 178.320 · General requirements applicable to all DOT specification cargo tank motor vehicles.
- 178.33 · Specification 2P; inner nonrefillable metal receptacles.
- 178.33-1 · -1 Compliance.
- 178.33-2 · -2 Type and size.
- 178.33-3 · -3 Inspection.
- 178.33-4 · -4 Duties of inspector.
- 178.33-5 · -5 Material.
- 178.33-6 · -6 Manufacture.
- 178.33-7 · -7 Wall thickness.
- 178.33-8 · -8 Tests.
- 178.33-9 · -9 Marking.
- 178.337 · Specification MC 331; cargo tank motor vehicle primarily for transportation of compressed gases as defined in subpart G of part 173 of this subchapter.
- 178.337-1 · -1 General requirements.
- 178.337-10 · -10 Accident damage protection.
- 178.337-11 · -11 Emergency discharge control.
- 178.337-12 · -12 [Reserved]
- 178.337-13 · -13 Supporting and anchoring.
- 178.337-14 · -14 Gauging devices.
- 178.337-15 · -15 Pumps and compressors.
- 178.337-16 · -16 Testing.
- 178.337-17 · -17 Marking.
- 178.337-18 · -18 Certification.
- 178.337-2 · -2 Material.
- 178.337-3 · -3 Structural integrity.
- 178.337-4 · -4 Joints.
- 178.337-5 · -5 Bulkheads, baffles and ring stiffeners.
- 178.337-6 · -6 Closure for manhole.
- 178.337-7 · -7 Overturn protection.
- 178.337-8 · -8 Openings, inlets, and outlets.
- 178.337-9 · -9 Pressure relief devices, piping, valves, hoses, and fittings.
- 178.338 · Specification MC-338; insulated cargo tank motor vehicle.
- 178.338-1 · -1 General requirements.
- 178.338-10 · -10 Accident damage protection.
- 178.338-11 · -11 Discharge control devices.
- 178.338-12 · -12 Shear section.
- 178.338-13 · -13 Supporting and anchoring.
- 178.338-14 · -14 Gauging devices.
- 178.338-15 · -15 Cleanliness.
- 178.338-16 · -16 Inspection and testing.
- 178.338-17 · -17 Pumps and compressors.
- 178.338-18 · -18 Marking.
- 178.338-19 · -19 Certification.
- 178.338-2 · -2 Material.
- 178.338-3 · -3 Structural integrity.
- 178.338-4 · -4 Joints.
- 178.338-5 · -5 Stiffening rings.
- 178.338-6 · -6 Manholes.
- 178.338-7 · -7 Openings.
- 178.338-8 · -8 Pressure relief devices, piping, valves, and fittings.
- 178.338-9 · -9 Holding time.
- 178.33a · Specification 2Q; inner nonrefillable metal receptacles.
- 178.33a-1 · -1 Compliance.
- 178.33a-2 · -2 Type and size.
- 178.33a-3 · -3 Inspection.
- 178.33a-4 · -4 Duties of inspector.
- 178.33a-5 · -5 Material.
- 178.33a-6 · -6 Manufacture.
- 178.33a-7 · -7 Wall thickness.
- 178.33a-8 · -8 Tests.
- 178.33a-9 · -9 Marking.
- 178.33b · Specification 2S; inner nonrefillable plastic receptacles.
- 178.33b-1 · -1 Compliance.
- 178.33b-2 · -2 Type and size.
- 178.33b-3 · -3 Inspection.
- 178.33b-4 · -4 Duties of inspector.
- 178.33b-5 · -5 Material.
- 178.33b-6 · -6 Manufacture.
- 178.33b-7 · -7 Design qualification test.
- 178.33b-8 · -8 Production tests.
- 178.33b-9 · -9 Marking.
- 178.33c · Specification 2P; inner nonrefillable metal receptacle variation.
- 178.33c-1 · -1 Compliance.
- 178.33c-2 · -2 Variation.
- 178.33d · Specification 2Q; inner nonrefillable metal receptacle variations.
- 178.33d-1 · -1 Compliance.
- 178.33d-2 · -2 Variation 1.
- 178.33d-3 · -3 Variation 2.
- 178.340-178.343 · -178.343 [Reserved]
- 178.345 · General design and construction requirements applicable to Specification DOT 406 (§ 178.346), DOT 407 (§ 178.347), and DOT 412 (§ 178.348) cargo tank motor vehicles.
- 178.345-1 · -1 General requirements.
- 178.345-10 · -10 Pressure relief.
- 178.345-11 · -11 Tank outlets.
- 178.345-12 · -12 Gauging devices.
- 178.345-13 · -13 Pressure and leakage tests.
- 178.345-14 · -14 Marking.
- 178.345-15 · -15 Certification.
- 178.345-2 · -2 Material and material thickness.
- 178.345-3 · -3 Structural integrity.
- 178.345-4 · -4 Joints.
- 178.345-5 · -5 Manhole assemblies.
- 178.345-6 · -6 Supports and anchoring.
- 178.345-7 · -7 Circumferential reinforcements.
- 178.345-8 · -8 Accident damage protection.
- 178.345-9 · -9 Pumps, piping, hoses and connections.
- 178.346 · Specification DOT 406; cargo tank motor vehicle.
- 178.346-1 · -1 General requirements.
- 178.346-2 · -2 Material and thickness of material.
- 178.346-3 · -3 Pressure relief.
- 178.346-4 · -4 Outlets.
- 178.346-5 · -5 Pressure and leakage tests.
- 178.347 · Specification DOT 407; cargo tank motor vehicle.
- 178.347-1 · -1 General requirements.
- 178.347-2 · -2 Material and thickness of material.
- 178.347-3 · -3 Manhole assemblies.
- 178.347-4 · -4 Pressure relief.
- 178.347-5 · -5 Pressure and leakage test.
- 178.348 · Specification DOT 412; cargo tank motor vehicle.
- 178.348-1 · -1 General requirements.
- 178.348-2 · -2 Material and thickness of material.
- 178.348-3 · -3 Pumps, piping, hoses and connections.
- 178.348-4 · -4 Pressure relief.
- 178.348-5 · -5 Pressure and leakage test.
- 178.35 · General requirements for specification cylinders.
- 178.350 · Specification 7A; general packaging, Type A.
- 178.36 · Specification 3A and 3AX seamless steel cylinders.
- 178.37 · Specification 3AA and 3AAX seamless steel cylinders.
- 178.38 · Specification 3B seamless steel cylinders.
- 178.39 · Specification 3BN seamless nickel cylinders.
- 178.42 · Specification 3E seamless steel cylinders.
- 178.44 · Specification 3HT seamless steel cylinders for aircraft use.
- 178.45 · Specification 3T seamless steel cylinder.
- 178.46 · Specification 3AL seamless aluminum cylinders.
- 178.47 · Specification 4DS welded stainless steel cylinders for aircraft use.
- 178.50 · Specification 4B welded or brazed steel cylinders.
- 178.500 · Purpose, scope and definitions.
- 178.502 · Identification codes for packagings.
- 178.503 · Marking of packagings.
- 178.504 · Standards for steel drums.
- 178.505 · Standards for aluminum drums.
- 178.506 · Standards for metal drums other than steel or aluminum.
- 178.507 · Standards for plywood drums.
- 178.508 · Standards for fiber drums.
- 178.509 · Standards for plastic drums and jerricans.
- 178.51 · Specification 4BA welded or brazed steel cylinders.
- 178.510 · Standards for wooden barrels.
- 178.511 · Standards for aluminum and steel jerricans.
- 178.512 · Standards for steel, aluminum or other metal boxes.
- 178.513 · Standards for boxes of natural wood.
- 178.514 · Standards for plywood boxes.
- 178.515 · Standards for reconstituted wood boxes.
- 178.516 · Standards for fiberboard boxes.
- 178.517 · Standards for plastic boxes.
- 178.518 · Standards for woven plastic bags.
- 178.519 · Standards for plastic film bags.
- 178.520 · Standards for textile bags.
- 178.521 · Standards for paper bags.
- 178.522 · Standards for composite packagings with inner plastic receptacles.
- 178.523 · Standards for composite packagings with inner glass, porcelain, or stoneware receptacles.
- 178.53 · Specification 4D welded steel cylinders for aircraft use.
- 178.55 · Specification 4B240ET welded or brazed cylinders.
- 178.56 · Specification 4AA480 welded steel cylinders.
- 178.57 · Specification 4L welded insulated cylinders.
- 178.58 · Specification 4DA welded steel cylinders for aircraft use.
- 178.59 · Specification 8 steel cylinders with porous fillings for acetylene.
- 178.60 · Specification 8AL steel cylinders with porous fillings for acetylene.
- 178.600 · Purpose and scope.
- 178.601 · General requirements.
- 178.602 · Preparation of packagings and packages for testing.
- 178.603 · Drop test.
- 178.604 · Leakproofness test.
- 178.605 · Hydrostatic pressure test.
- 178.606 · Stacking test.
- 178.607 · Cooperage test for bung-type wooden barrels.
- 178.608 · Vibration standard.
- 178.609 · Test requirements for packagings for infectious substances.
- 178.61 · Specification 4BW welded steel cylinders with electric-arc welded seam.
- 178.65 · Specification 39 non-reusable (non-refillable) cylinders.
- 178.68 · Specification 4E welded aluminum cylinders.
- 178.69 · Responsibilities and requirements for manufacturers of UN pressure receptacles.
- 178.70 · Approval of UN pressure receptacles.
- 178.700 · Purpose, scope and definitions.
- 178.702 · IBC codes.
- 178.703 · Marking of IBCs.
- 178.704 · General IBC standards.
- 178.705 · Standards for metal IBCs.
- 178.706 · Standards for rigid plastic IBCs.
- 178.707 · Standards for composite IBCs.
- 178.708 · Standards for fiberboard IBCs.
- 178.709 · Standards for wooden IBCs.
- 178.71 · Specifications for UN pressure receptacles.
- 178.710 · Standards for flexible IBCs.
- 178.74 · Approval of MEGCs.
- 178.75 · Specifications for MEGCs.
- 178.800 · Purpose and scope.
- 178.801 · General requirements.
- 178.802 · Preparation of fiberboard IBCs for testing.
- 178.803 · Testing and certification of IBCs.
- 178.810 · Drop test.
- 178.811 · Bottom lift test.
- 178.812 · Top lift test.
- 178.813 · Leakproofness test.
- 178.814 · Hydrostatic pressure test.
- 178.815 · Stacking test.
- 178.816 · Topple test.
- 178.817 · Righting test.
- 178.818 · Tear test.
- 178.819 · Vibration test.
- 178.900 · Purpose and scope.
- 178.905 · Large Packaging identification codes.
- 178.910 · Marking of Large Packagings.
- 178.915 · General Large Packaging standards.
- 178.920 · Standards for metal Large Packagings.
- 178.925 · Standards for rigid plastic Large Packagings.
- 178.930 · Standards for fiberboard Large Packagings.
- 178.935 · Standards for wooden Large Packagings.
- 178.940 · Standards for flexible Large Packagings.
- 178.950 · Purpose and scope.
- 178.955 · General requirements.
- 178.960 · Preparation of Large Packagings for testing.
- 178.965 · Drop test.
- 178.970 · Bottom lift test.
- 178.975 · Top lift test.
- 178.980 · Stacking test.
- 178.985 · Vibration test.
United States Government work; public domain under 17 U.S.C. § 105.