Contents
THE COUNCIL OF THE EUROPEAN UNION,Having regard to the Treaty on the Functioning of the European Union, and in particular Article 215 thereof,Having regard to the joint proposal from the High Representative of the Union for Foreign Affairs and Security Policy and of the European Commission,Whereas:
(1)On 20 July 2023, the Council adopted Decision 2023/1532/CFSPnote and Regulation (EU) 2023/1529note, concerning restrictive measures in view of Iran’s military support to Russia’s war of aggression against Ukraine and to armed groups and entities in the Middle East and the Red Sea region.
(2)In view of the gravity of the situation with regard to Iran’s military support to Russia’s war of aggression against Ukraine, the Council adopted Decision (CFSP) 2024/1336, which amended Decision (CFSP) 2023/1532 on 14 May 2024.
(3)On 18 November 2024, the Council adopted Decision (CFSP) 2024/2894, which amended Decision (CFSP) 2023/1532. This Decision introduced further restrictive measures, in view of Iran’s continued military support to Russia’s war of aggression against Ukraine and in particular Iran’s supply of unmanned aerial vehicles (‘UAVs’) and missiles to Russia.
(4)The Council considers that the prohibition on the export, sale, transfer or supply from the Union to Iran should be extended to include further components used in the development and production of UAVs and missiles,
HAS ADOPTED THIS REGULATION:
Article 1#
Annex II to Regulation (EU) 2023/1529 is amended in accordance with the Annex to this Regulation.
Article 2#
This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union.
Annex II · List of items referred to in article 2
Introductory notes
1.Where “ex” precedes the HS/CN code, the goods covered by Regulation (EU) 2023/1529 constitute only a part of the scope of the HS/CN code and are determined by both the description given in this Annex and the scope of the HS/CN code.
2.Definitions of terms between ‘single quotation marks’ are given in a technical note to the relevant item.
3.Definitions of terms between “double quotation marks” can be found in Annex I to Regulation (EU) 2021/821.
Category 1 – Special materials and related equipment
| Description | HS/CN code |
|---|---|
| Energetic materials as follows and mixtures thereof: | |
| Ammonium picrate (CAS 131-74-8); | ex29089900 |
| Black powder; | ex36010000 |
| Hexanitrodiphenylamine (CAS 131-73-7); | ex29214400 |
| Difluoroamine (CAS 10405-27-3); | ex28129000 |
| Nitrostarch (CAS 9056-38-6); | ex35051050 |
| Tetranitronaphthalene; | ex29029000 |
| Trinitroanisol; | ex29093090 |
| Trinitronaphthalene; | ex29029000 |
| Trinitroxylene; | ex29024100ex29024200ex29024300ex29024400 |
| N-methyl-2-pyrrolidinone; 1-methyl-2-pyrrolidinone (CAS 872-50-4); | ex29397990 |
| Dioctylmaleate (CAS 142-16-5); | ex29171980 |
| Ethylhexylacrylate (CAS 103-11-7); | ex29161200 |
| Triethylaluminium (TEA) (CAS 97-93-8), trimethylaluminium (TMA) (CAS 75-24-1), and other pyrophoric metal alkyls and aryls of lithium, sodium, magnesium, zinc or boron; | ex29319000 |
| Nitrocellulose (CAS 9004-70-0); | 391220 |
| Nitroglycerin (or glyceroltrinitrate, trinitroglycerine) (NG) (CAS 55-63-0); | ex29209070 |
| 2,4,6-trinitrotoluene (TNT) (CAS 118-96-7); | ex29042000 |
| Ethylenediaminedinitrate (EDDN) (CAS 20829-66-7); | ex29209070 |
| Pentaerythritoltetranitrate (PETN) (CAS 78-11-5); | ex29209070 |
| Lead azide (CAS 13424-46-9), normal lead styphnate (CAS 15245-44-0) and basic lead styphnate (CAS 12403-82-6), and primary explosives or priming compositions containing azides or azide complexes; | ex28500060ex29089900 |
| Diethyldiphenylurea (CAS 85-98-3); dimethyldiphenylurea (CAS 611-92-7); methylethyldiphenyl urea | ex29242100 |
| N,N-diphenylurea (unsymmetrical diphenylurea) (CAS 603-54-3); | ex29242100 |
| Methyl-N,N-diphenylurea (methyl unsymmetrical diphenylurea) (CAS 13114-72-2); | ex29242100 |
| Ethyl-N,N-diphenylurea (ethyl unsymmetrical diphenylurea) (CAS 64544-71-4); | ex29242100 |
| 4-Nitrodiphenylamine (4-NDPA)(CAS 836-30-6); | ex29214400 |
| 2,2-dinitropropanol (CAS 918-52-5); | ex29055998 |
| Fibrous and filamentary materials, not controlled by 1C010note or 1C210note, for use in “composite” structures and with a specific modulus of 3,18 x 106 m or greater and a specific tensile strength of 7,62 x 104 m or greater | ex540211ex550111ex550311ex681511ex681512ex681519ex70191910 |
| Nanomaterials as follows:a. Semiconductor nanomaterials;b. Composite-based nanomaterials; orc. Any of the following carbon-based nanomaterials: 1.Carbon nanotubes;2.Carbon nanofibres;3.Fullerenes;4.Graphenes; or5.Carbon onions.Notes:For the purpose of this control, nanomaterial means a material that meets at least one of the following criteria:1. Consists of particles, with one or more external dimensions in the size range 1 - 100 nm for more than 1 % of their number size distribution;2. Has internal or surface structures in one or more dimensions in the size range 1 - 100 nm; or3. Has a specific surface area by volume greater than 60 m2/cm3, excluding materials consisting of particles with a size lower than 1 nm | ex280530ex284610ex284690ex540211ex550111ex550311ex681511ex681512ex681513ex681519ex701912ex701919 |
| Tungsten, tungsten carbide and alloys, not controlled by 1C117note, 1C226note, II.A1.013note or II.A1.017note, containing more than 90 % tungsten by weight.Note 1:For the purpose of this control, wire is excludedNote 2:For the purpose of this control, surgical or medical instruments are excluded | 28499030ex810110ex810194ex810197ex810199 |
| Ultra-High-Molecular-Weight Polyethylene (UHMWPE), not controlled by 1C010note or 1C210note, presented in any of the following forms:a. Primary forms;b. Filament yarn or monofilaments;c. Filament tows;d. Rovings;e. Staple or chopped fibres;f. Fabrics;g. Pulp or flocks. | ex39012010ex39012090ex540239ex540249ex540259ex540269ex54049090ex54072011ex54072019ex550190ex550390ex550690ex560130 |
Category 2 – Materials processing
| Description | HS/CN code |
|---|---|
| Bearings and bearing systems not controlled by 2A001 and 2A101:a. Ball bearings or Solid ball bearings, having tolerances specified by the manufacturer in accordance with ABEC 7, ABEC 7P, or ABEC 7T or ISO Standard Class 4 or better (or equivalents) and having any of the following characteristics; 1.Manufactured for use at operating temperatures above 573 K (300 °C) either by using special materials or by special heat treatment; or2.With lubricating elements or component modifications that, according to the manufacturer’s specifications, are specially designed to enable the bearings to operate at speeds exceeding 2,3 million ‘DN’;b. Solid tapered roller bearings, having tolerances specified by the manufacturer in accordance with ANSI/ABMA Class 00 (inch) or Class A (metric) or better (or equivalents) and having either of the following characteristics: 1.With lubricating elements or component modifications that, according to the manufacturer’s specifications, are specially designed to enable the bearings to operate at speeds exceeding 2,3 million ‘DN’; or2.Manufactured for use at operating temperatures below 219 K (– 54 °C) or above 423 K (150 °C);c. Gas-lubricated foil bearing manufactured for use at operating temperatures of 561 K (288 °C) or higher and a unit load capacity exceeding 1 MPa;d. Active magnetic bearing systems;e. Fabric-lined self-aligning or fabric-lined journal sliding bearings manufactured for use at operating temperatures below 219 K (– 54 °C) or above 423 K (150 °C). | ex848210ex848220ex848230ex848240ex848250ex848280ex848291 |
| Technical Notes:1.‘DN’ is the product of the bearing bore diameter in mm and the bearing rotational velocity in rpm.2.Operating temperatures include those temperatures obtained when a gas turbine engine has stopped after operation. | |
| Concealed object detection equipment operating in the frequency range from 30 GHz to 3000 GHz and having a spatial resolution of 0,1 mrad (milliradian) up to and including 1 mrad (milliradian) at a standoff distance of 100 m; and components, other than those specified in the CML or in Regulation (EU) 2021/821.Note: Concealed object detection equipment includes but is not limited to equipment for screening people, documents, baggage, other personal effects, cargo and/or mail.Technical Note:The range of frequencies span what is generally considered as the millimetre-wave, submillimetre-wave and terahertz frequency regions. | ex852610ex852692ex84821090 |
| “Numerical control” units for machine tools and “numerically controlled” machine tools, other than those specified in the CML or in Regulation (EU) 2021/821 (see List of Items Controlled):a. “Numerical control” units for machine tools: 1.Having four interpolating axes that can be coordinated simultaneously for contouring control; or2.Having two or more axes that can be coordinated simultaneously for contouring control and a minimum programmable increment better (less) than 0,001 mm;3.“Numerical control” units for machine tools having two, three or four interpolating axes that can be coordinated simultaneously for contouring control, and capable of receiving directly (on-line) and processing computer-aided-design (CAD) data for internal preparation of machine instructions; orb. Motion control boards specially designed for machine tools and having any of the following characteristics: 1.Interpolation in more than four axes;2.Capable of real-time processing of data to modify tool path, feed rate and spindle data, during the machining operation, by any of the following:a.Automatic calculation and modification of part program data for machining in two or more axes by means of measuring cycles and access to source data; orb.Adaptive control with more than one physical variable measured and processed by means of a computing model (strategy) to change one or more machining instructions to optimize the process; or3.Capable of receiving and processing CAD data for internal preparation of machine instructions;c. “Numerically controlled” machine tools that, according to the manufacturer’s technical specifications, can be equipped with electronic devices for simultaneous contouring control in two or more axes and that have both of the following characteristics: 1.Two or more axes that can be coordinated simultaneously for contouring control; and2.Positioning accuracies according to ISO 230/2 (2006), with all compensations available:a.Better than 15 μm along any linear axis (overall positioning) for grinding machines;b.Better than 15 μm along any linear axis (overall positioning) for milling machines; orc.Better than 15 μm along any linear axis (overall positioning) for turning machines; ord. Machine tools, as follows, for removing or cutting metals, ceramics or “composites”, that, according to the manufacturer’s technical specifications, can be equipped with electronic devices for simultaneous contouring control in two or more axes: 1.Machine tools for turning, grinding, milling or any combination thereof, having two or more axes that can be coordinated simultaneously for contouring control and having any of the following characteristics:a.One or more contouring “tilting spindles”;Note:this applies to machine tools for grinding or milling only.b.“Camming” (axial displacement) in one revolution of the spindle less (better) than 0,0006 mm total indicator reading (TIR);Note:this applies to machine tools for turning only.c.“Run-out” (out-of-true running) in one revolution of the spindle less (better) than 0,0006 mm total indicator reading (TIR); ord.The positioning accuracies, with all compensations available, are less (better) than: 0,001° on any rotary axis;2.Electrical discharge machines (EDM) of the wire feed type that have five or more axes that can be coordinated simultaneously for contouring control. | ex85371010ex85371098ex845630ex845710ex845720ex845730ex845811ex845891ex845910ex845931ex845951ex845961ex846012ex846022ex846023ex846024 |
| Assemblies, circuit boards or inserts specially designed for machine tools controlled in this annex:a. Spindle assemblies, consisting of spindles and bearings as a minimal assembly, with radial (“run-out”) or axial (“camming”) axis motion in one revolution of the spindle less (better) than 0,0006 mm total indicator reading (TIR);b. Single point diamond cutting tool inserts, having all of the following characteristics: 1.Flawless and chip-free cutting edge when magnified 400 times in any direction;2.Cutting radius from 0,1 to 5 mm inclusive; and3.Cutting radius out-of-roundness less (better) than 0,002 mm TIR.c. Specially designed printed circuit boards with mounted components capable of upgrading, according to the manufacturer’s specifications, “numerical control” units, machine tools or feed-back devices to or above the levels specified in this Annex.Technical Note:This entry does not control measuring interferometer systems, without closed or open loop feedback, containing a laser to measure slide movement errors of machine-tools, dimensional inspection machines or similar equipment. | ex820719ex820720ex820750ex820760ex820790ex846610ex84662020ex84662091ex84662098ex846630ex846693ex846693 |
| “Software” specially designed for the “development”, “production”, or “use” of the machine tools controlled in this Annex | |
| “Numerical controlled” machine tools, having one or more linear axis with a travel length greater than 8000 mm. | ex8456ex8457ex8458ex8459ex8460 |
Category 3 – Electronics
| Description | HS/CN code |
|---|---|
| Integrated circuits as follows: Field Programable Gate Array (FPGA), microcontrollers, microprocessors, signal processors, signal analysers, Analogue-to-Digital Converters (ADC), voltage regulators, video encoders and DC-DC converters | ex854231ex854239 |
| “Monolithic Microwave Integrated Circuits” (“MMIC”) amplifiers and devices | ex85423385437002 |
| RF filters or Electromagnetic Interference (EMI) filters | ex854800 |
| Tantalum capacitors | 853221 |
| Aluminium electrolytic capacitors | 853222 |
| Ceramic dielectric multilayer capacitors | 853224 |
| Storage integrated circuits, as follows:a. Electrically erasable programmable read-only memories (EEPROMs) with a storage capacity; 1.Exceeding 16 Mbits per package for flash memory types; or2.Exceeding either of the following limits for all other EEPROM types:a.Exceeding 1 Mbit per package; orb.Exceeding 256 kbit per package and a maximum access time of less than 80 ns;b. Static random access memories (SRAMs) with a storage capacity: 1.Exceeding 1 Mbit per package; or2.Exceeding 256 kbit per package and a maximum access time of less than 25 ns | ex854232 |
| Mounted piezo-electric crystals | 854160 |
| ‘Semiconductor devices’ fulfilling the military standard MIL-STD-750D or other equivalent standard.Technical note: For the purpose of this control ‘semiconductor devices’ are electronic components that rely on the electronic properties of a semiconductor material, such as diodes, transducers, photosensitive devices, thyristors, diacs, triacs or transistors, including metal–oxide–semiconductor field-effect transistors (MOSFETs), FETs, FINFETs, IGBT, etc. | ex854110ex854121ex854129ex854130ex854149ex854151ex854159 |
| Electrical plugs, connectors, jacks, jumpers, terminals, sockets or adapters, having any of the following:a. Rated for operation at an ambient temperature above 398K (125 °C);b. Rated for operation at an ambient temperature below 218K (– 55 °C); orc. Rated for operation over the entire ambient temperature range from 218K (– 55 °C) to 398K (125 °C). | ex853669ex853690 |
| Static converters | 850440 |
| Machines and apparatus for the manufacture of boules or wafers | 848610 |
| Machines and apparatus for the manufacture of semiconductor devices or of electronic integrated circuits | 848620 |
| Equipment for the manufacture of Printed Circuit Boards (PCBs) and specially designed components and accessories therefor, as follows:a. Film processing equipment;b. Solder mask coating equipment;c. Photo plotter equipment;d. Plating or electroplating deposition equipment;e. Vacuum chambers and presses;f. Roll laminators;g. Alignment equipment; orh. Etching equipment. | ex84248940ex84798970ex85433040ex848640ex84201081ex84799015 |
| Automated optical inspection equipment for testing Printed Circuit Boards (PCBs), based on optical or electrical sensors, and capable to detect any of the following quality defects:a. Spacing, area, volume or height;b. Bill boarding;c. Components (presence, absence, flipped, offset, polarity, or skew);d. Solder (bridging, insufficient solder joints);e. Leads (insufficient paste, lifting);f. Tombstoning; org. Electrical (shorts, opens, resistance, capacitance, power, grid performance). | ex903031ex903032ex90303320ex90303370ex90303900ex903084ex903089ex90314910ex90314990ex90318020ex90318080 |
| Oscilloscopes and oscillographs | 903020 |
| Instruments and apparatus for measuring or checking semiconductor wafers or devices | 903082 |
| Signal generators | 854320 |
| Chemicals and materials of the type used in the production of Printed Circuit Boards (PCBs), as follows:a. PCB “composite” substrates made of glass fibre or cotton (e.g. FR-4, FR-2, FR 6, CEM-1, G-10, etc.);b. Multilayer PCB substrates, containing at least one layer of any of the following materials: 1.Aluminium;2.Polytetrafluoroethylene (PTFE); or3.Ceramic materials (e.g. alumina, titanium oxide, etc.);c. Etchant chemicals; 1.Ferric chloride (7705-08-0);2.Cupric chloride (7447-39-4);3.Ammonium persulphate (7727-54-0);4.Sodium persulphate (7775-27-1); or5.Chemical preparations specially designed for etching and containing any of the chemicals included in points 1 to 4. Note:This control does not control ‘chemical mixtures’ containing one or more of the chemicals specified in this entry in which no individually specified chemical constitutes more than 10 % by the weight of the mixture.d. Copper foil with a minimum purity 95 % and of a thickness less than 100 μm;e. Polymeric substances and films thereof of less than 0,5 mm of thickness, as follows: 1.Aromatic polyimides;2.Parylenes;3.Benzocyclobutenes (BCBs); or4.Polybenzoxazoles. | ex39219055ex853400ex28273920ex28273985ex283340ex38249996ex741011ex741021ex39191080ex39199080 |
| “Software” specially designed for the test, “development” or “production” of Printed Circuit Boards (PCBs). | N/A |
| Radio frequency systems and equipment not included in Regulation (EU) 2021/821, components and accessories, specially designed or modified to develop any of the following functions:a. Take control and command of UAVs.b. Deliberately and selectively interfere with, deny, inhibit, degrade or deceive radio frequency signals for the control and command of unmanned aircraft.c. Use the specific features of the radio frequency protocol used by drones to interfere with their operation. | ex851762ex851771ex851779ex852550ex852692ex852910ex85437090 |
Category 4 – Computers
| Description | HS/CN code |
|---|---|
| Electronic computers and related equipment, and “electronic assemblies” and specially designed components therefor, rated for operation at an ambient temperature above 343 K (70 °C) | ex8471 |
| “Digital computers”, including equipment of “signal processing” or “image enhancement”, having an “Adjusted Peak Performance” (“APP”) equal to or greater than 0,0128 Weighted TeraFLOPS (WT) | ex8471 |
| Hybrid computers and “electronic assemblies” and specially designed components therefor containing analogue-to-digital converters having all of the following characteristics:a. 32 channels or more; andb. A resolution of 14 bit (plus sign bit) or more with a conversion rate of 200000 Hz or more | ex8471 |
Category 5 – Telecommunications and information security
| Description | HS/CN code |
|---|---|
| Telecommunications apparatus, devices or machines, for “aircraft” | ex851762ex851769 |
Category 6 – Sensors and lasers
| Description | HS/CN code |
|---|---|
| Cameras for aerial survey | ex900630 |
| Optical Sensors as follows:a. Image intensifier tubes and specially designed components therefor, as follows: 1.Image intensifier tubes having all the following:a.A peak response in wavelength range exceeding 400 nm, but not exceeding 1050 nm;b.A microchannel plate for electron image amplification with a hole pitch (centre-to-centre spacing) of less than 25 μm; andc.Having any of the following:1.An S-20, S-25 or multialkali photocathode; or2.A GaAs or GaInAs photocathode;2.Specially designed microchannel plates having both of the following characteristics:a.15000 or more hollow tubes per plate; andb.Hole pitch (centre-to-centre spacing) of less than 25 μmb. Direct view imaging equipment operating in the visible or infrared spectrum, incorporating image intensifier tubes having the characteristics of the image intensifier tube included in this control. | ex852990ex854239ex900691ex901380ex902580ex902590ex902680ex902690ex902750ex903210 |
| Telescopic sights for fitting to arms; periscopes; telescopes designed to form parts of machines, appliances, instruments or apparatus of this chapter or Section XVI | 901310 |
| Night vision cameras | 852583 |
| Cameras that meet the criteria of Note 3 to 6A003.b.4note | ex852589ex900630 |
| Airborne laser rangefinders | ex90132000ex90138000ex90139080ex901510ex901580ex901590ex90318020ex90318080ex90319000ex90330090 |
| ‘Primary cells’ or batteries and components having an energy density of 150 Wh/kg or more at 293 K (20 °C)Technical Notes:1.For the purposes of this control, ‘energy density’ (Wh/kg) is calculated from the nominal voltage multiplied by the nominal capacity in ampere-hours (Ah) divided by the mass in kilograms. If the nominal capacity is not stated, energy density is calculated from the nominal voltage squared then multiplied by the discharge duration in hours divided by the discharge load in ohms and the mass in kilograms.2.For the purposes of this control, a ‘cell’ is defined as an electrochemical device, which has positive and negative electrodes, an electrolyte, and is a source of electrical energy. It is the basic building block of a battery.3.For the purposes of this control, a ‘primary cell’ is a ‘cell’ that is not designed to be charged by any other source. | ex8506 |
| Radar systems, equipment and major components, other than those specified in the CML or in Regulation (EU) 2021/821, and specially designed components therefor, as follows:a. Airborne radar equipment, other than those specified in the CML or in Regulation (EU) 2021/821, and specially designed components therefor;b. “Space-qualified” “laser” radar or Light Detection and Ranging (LIDAR) equipment specially designed for surveying or for meteorological observation;c. Millimeter wave enhanced vision radar imaging systems specially designed for rotary wing aircraft and having all of the following: 1.Operates at a frequency of 94 GHz;2.An average output power of less than 20 mW;3.Radar beam width of 1 degree; and4.Operating range equal to or greater than 1500 m | ex852610ex852990ex901510ex 90 |
| “Magnetometers”, “Superconductive” electromagnetic sensors, and specially designed components therefor, as follows:a. “Magnetometers”, other than those specified in the CML or in Regulation (EU) 2021/821, having a ‘sensitivity’ lower (better) than 1,0 nT (rms) per square root Hz Technical Note: For the purposes of this control, ‘sensitivity’ (noise level) is the root mean square of the device-limited noise floor which is the lowest signal that can be measured.b. “Superconductive” electromagnetic sensors, components manufactured from “superconductive” materials: 1.Designed for operation at temperatures below the “critical temperature” of at least one of their “superconductive” constituents (including Josephson effect devices or “superconductive” quantum interference devices (SQUIDS));2.Designed for sensing electromagnetic field variations at frequencies of 1 kHz or less; and3.Having any of the following characteristics:a.Incorporating thin-film SQUIDS with a minimum feature size of less than 2 μm and with associated input and output coupling circuits;b.Designed to operate with a magnetic field slew rate exceeding 1 x 106 magnetic flux quanta per second;c.Designed to function without magnetic shielding in the earth’s ambient magnetic field; ord.Having a temperature coefficient less (smaller) than 0,1 magnetic flux quantum/K | ex901580ex903180 |
| Gravity meters (gravimeters) for ground use, other than those specified in the CML or in Regulation (EU) 2021/821, as follows:a. Having a static accuracy of less (better) than 100 μGal; orb. Being of the quartz element (Worden) type | ex901580 |
| “Software”, other than those specified in the CML or in Regulation (EU) 2021/821, specially designed for the “development”, “production”, or “use” of goods controlled by 6A002note, 6A003note, and radars, magnetometers and gravity meters included in Category 6 of this Regulation. | N/A |
Category 7 – Navigation and avionics
| Description | HS/CN code |
|---|---|
| Inertial Navigation systems, Inertial Measuring Units (IMU), accelerometers or gyros, and parts and accessories thereof | ex901420ex901480ex901490 |
| Aerials and aerial reflectors for “aircraft” or guidance systems, parts suitable for use therewith | ex851771ex852910 |
| “Satellite navigation system” equipment, including aerials and antennas suitable for the reception of GNSS signals, and parts thereof | ex852691ex852990ex852610ex852692ex851771ex852910 |
| Digital flight data recorders | 85437004 |
| Radio navigational aid apparatus for “aircraft” and specially designed components thereof | ex852691ex852990 |
| Flight control units for “Unmanned Aerial Vehicles” (“UAVs”), and parts thereof | ex853710ex880730 |
| Remote control units for “Unmanned Aerial Vehicles” (“UAVs”), and parts thereof | ex851761ex852692ex853710ex85437090ex880730 |
Category 9 – Aerospace and propulsion
| Description | HS/CN code |
|---|---|
| “Unmanned aerial vehicles” (“UAVs”) other than those designed for carrying passengers, and parts thereof | 880621880622880623880624880629880691880692880693880694880699ex880730 |
| Aero gas turbine engines (turboprop, turbojet and turbofan) for “aircraft”, and specially designed components thereof | ex841111ex841112ex841121ex841122ex841191 |
| Spark-ignition reciprocating or rotary internal combustion piston engines for “aircraft” | 840710 |
| Parts suitable for use solely or principally with internal combustion piston engine for “aircraft” | 840910 |
| Compression-ignition internal combustion piston engines for “aircraft” | ex840890 |
| Servomotor for “Unmanned Aerial Vehicles” (“UAVs”) | ex8501ex880730 |
| Launch systems for “UAVs”, and parts thereof | ex880510ex880730 |
| Ground support equipment for “UAVs” | ex880510 |
| Testing equipment for aerospace and propulsion, and specially designed components therefor, other than those specified in the CML or in Regulation (EU) 2021/821.Note: this control includes the following items, and the related “software”:Load release test bench and other facilities to simulate safe separation from the “aircraft” or launch system.Salt spray chambers for temperature and humidity ranges to perform oxidation tests.Chambers to perform fungus tests.Devices for acceleration, shock and transport shock tests.Vibration chambers with altitude, temperature and humidity ranges.Chambers for explosive decompression tests.Chambers for temperature, humidity and solar radiation tests.Devices to estimate the captured solar radiation for solar radiation tests.Vibrators for sinusoidal, random and shock tests, combinable with altitude, temperature and humidity tests.Vibration table for longitudinal and lateral tests combined with temperature chambers.Overpressure chambers. | ex903120ex903180 |
| ‘Flight termination’ systems and specifically designed components.Note: this control covers digital and analogic communications standards for Flight Termination Systems, including encrypted operational modes.Technical notes:1. For the purpose of this control ‘flight termination’ can involve a controlled descent, self-destruction of the missile, or detonation of the warhead to minimize the risk of collateral damage2. For the purpose of this control, components include ground and on board equipment, command exciters, encoders, amplifier controllers, command verification receivers, amplifiers, transmitters, decoders and receivers. | ex852692ex852990 |
Category 10 – Technology
“Technology”, designed or specifically adapted for the test, development or production of equipment listed in this Annex
“Technology” for the “use” of machine tools controlled in this Annex.’.
Annex II to Regulation (EU) 2023/1529 is replaced by the following:
Source: EUR-Lex, © European Union, 1998-2026. Reuse authorised under Decision 2011/833/EU.