Council Regulation (EU) 2026/1463

Contents

THE COUNCIL OF THE EUROPEAN UNION,Having regard to the Treaty on the Functioning of the European Union, and in particular Article 31 thereof,Having regard to the proposal from the European Commission,Whereas:

(1)In order to ensure a sufficient and uninterrupted supply of certain agricultural and industrial products which are not produced in the Union, and thereby avoid any disturbances on the market for those products, Common Customs Tariff duties of the type referred to in Article 56(2), point (c), of Regulation (EU) No 952/2013 of the European Parliament and of the Council^note (‘CCT duties’) on those products have been suspended by Council Regulation (EU) 2021/2278^note. As a result, the products listed in the Annex to Regulation (EU) 2021/2278 can be imported into the Union at reduced or zero duty rates without any limitation as regards their quantity.

(2)The Union production of certain products that are not listed in the Annex to Regulation (EU) 2021/2278 is inadequate to meet the specific requirements of the user industries in the Union. As it is in the Union’s interest to ensure an adequate supply of certain products, and having regard to the fact that identical, equivalent or substitute products are not produced in sufficient quantities within the Union, it is necessary to grant a complete suspension of the CCT duties on those products.

(3)With a view to promoting integrated battery production in the Union, a partial suspension of CCT duties should be granted in respect of certain products related to battery production that are currently not listed in the Annex to Regulation (EU) 2021/2278 and the Union production of which is inadequate to meet the specific requirements of the user industries in the Union. The mandatory review of those suspensions should be completed by 31 December 2026 in order to set out the short-term evolution of the battery production sector in the Union.

(4)It is necessary to amend the product description, classification, or end-use requirement for certain products listed in the Annex to Regulation (EU) 2021/2278 in order to take into account technical product developments and economic trends in the market.

(5)In accordance with Article 2(2) of Regulation (EU) 2021/2278 the Commission has reviewed certain CCT duty suspensions for products listed in the Annex to that Regulation. As it is in the interest of the Union to maintain those CCT duty suspensions for certain of those products, new dates should be set for their next mandatory review.

(6)It is no longer in the interest of the Union to maintain the suspension of CCT duties for certain products listed in the Annex to Regulation (EU) 2021/2278. Those products should therefore be removed from that Annex, with effect from 1 July 2026.

(7)Regulation (EU) 2021/2278 should therefore be amended accordingly.

(8)In order to avoid any interruption in the application of the autonomous tariff suspension scheme and to comply with the guidelines set out in the communication from the Commission of 13 December 2011 concerning autonomous tariff suspensions and quotas, the changes provided for in this Regulation regarding the tariff suspensions for the products concerned should apply from 1 July 2026. This Regulation should therefore enter into force as a matter of urgency,

HAS ADOPTED THIS REGULATION:

Article 1 #

The Annex to Regulation (EU) 2021/2278 is amended in accordance with the Annex to this Regulation.

Article 2 #

This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union.It shall apply from 1 July 2026.

The Annex to Regulation (EU) 2021/2278 is amended as follows:

(1)the entries with the following serial numbers are deleted: 0.3341, 0.8865, 0.7594, 0.8425, 0.5110, 0.8425, 0.7540, 0.7541, 0.5495, 0.6802, 0.8795, 0.8877, 0.5987, 0.7056, 0.7056, 0.8668, 0.8669, 0.8680, 0.8675 and 0.8647;

(2)the following entries replace those entries that have the same serial numbers:^noteSerial NumberCN codeTARICDescriptionRate of autonomous dutySupplementary UnitDate envisaged for mandatory review‘0.4080ex1517909930Microbial oil, refined, containing by weight:

—25 % or more but not more than 70 % arachidonic acid and no more than 5 % docosahexenoic acid

—a coating or covering with polytetrafluoroethylene (PTFE),

—parts of common metal, and

—an output of more than 40 MW but not more than 90 MW,

—a length of 3,5 m or more but not more than 4,5 m,

—measuring 337 x 237 x 17 mm or more, but not more than 868 x 399 x 78 mm,

—with an AC or DC motor with or without transmission,

—a length of 670 mm or more, but not more than 882 mm,

—a length of 700 mm or more, but not more than 2820 mm,

—with or without operating components, signal components and display,

—with a rated voltage of 12 V,

—a purity by weight of 94 % or more,

—a horizontal field of view of 20^o or more, but not more than 220^o,

—with a content by weight of N′,N′′-[(2S,3E,5S)-1,6-diphenylhex-3-ene-2,5-diyl]bis(N,N-dimethylsulfuric diamide) (CAS RN 1247119-27-2) of 70 % or more,

—46 % or more but not more than 55 % of antimony pentoxide (CAS RN 1314-60-9), and

—25 % or more but not more than 55 % of the barium, calcium, magnesium or zinc salt of dinonylnaphthylsulphonic acid (CAS RN 25619-56-1, 28015-99-8, 28016-00-4, or 57855-77-3)

—of a diameter of 3 mm or more, but not exceeding 10 mm,

—80 % or more but not more than 90 % of a core shell polymer of butyl acrylate, ethyl acrylate, methyl-acrylate and allyl methacrylate (CAS RN 73026-23-0), and

—matt surface texture on both sides

—in the piece, cut to length or simply cut to rectangular (including square) shape,

—standardised with vegetable oil

—a coating with aluminium particles,

—whether or not comprising parts of plastic,

—designed for a pressure of not more than 165 bar and a temperature of not more than 565 °C,

—a width of 2 m or more but not more than 4,2 m,

—with a total weight of a set of 236 g or more, but not more than 1750 g,

—with or without power electronics

—a width of 390 mm or more, but not more than 655 mm,

—a width of 935 mm or more, but not more than 1660 mm,

—for operating voltages of 5V DC or more but not more than 24V DC or 220V AC or more but not more than 400V AC,

—fitted with connectors on both ends or/and with special adapter providing sealing and anti-rotation feature,

—a zeolite structure of aluminophosphate-eighteen (AEI), and

—a focal length of 1,16 mm or more, but not more than 20 mm,

—with a content by weight of water of not more than 30 %

—1 % or more but not more than 10 % of triethanolamine (CAS RN 102-71-6), or

—whether or not, not more than 25 % of the barium, calcium, magnesium or zinc salt of a mixture of C3-C24 carboxylic acids (CAS RN 68990-37-4)

—containing 8 % or more but not more than 40 % by weight of silver

—10 % or more but not more than 20 % of a copolymer of methyl methacrylate and ethyl acrylate (CAS RN 9010-88-2)

—a thickness of more than 50 μm but not more than 200 μm,

—of weight of 160 g/m² or more but not more than 300 g/m²,

—a phase purity of 90 % or more

—a height of 1 m or more, but not more than 1,3 m,

—with a fixed sensor,

—a height of 110 mm or more, but not more than 155 mm,

—a height of 85 mm or more, but not more than 700 mm,

—with or without housing

—with or without plastic anchoring jaws for mounting the steering gear housing of motor vehicles,

—a relative aperture of f/1,2 or more, but not more than f/4, and

—and with a dry weight purity of N′,N′′-[(2S,3E,5S)-1,6-diphenylhex-3-ene-2,5-diyl]bis(N,N-dimethylsulfuric diamide) (CAS RN 1247119-27-2) of 90 % or more

—1 % or more but not more than 10 % of triethanolamine phosphate (CAS RN 10017-56-8)

—on a carrier based on aluminium oxide,

—a width of 800 mm or more, but not more than 1500 mm, and

—with a filtration efficiency of class L or better (according to DIN 60335-2-69),

—a coating of phosphorous based flame retardants,

—epoxy resin reinforced with fiberglass or wood,

—equipped with individually controlled single or double seat valves on the live steam side which are operated with a hydraulic servo of not more than 30 bar

—with one or more promoters

—a diameter of 5 mm or more, but not more than 40 mm,

—a length of 300 m or more, but not more 2500 m

—pleatable,

—a nano fiber coating of a polyamide, a polyurethane or a fluorine-containing polymer

—whether or not printed or surface-treated,

—a weight of 11 tons or more but not more than 21,5 tons,

—with or without noise absorber,

—a weight of 60 kg or more, but not more than 165 kg, and

—a weight of 250 kg or more, but not more than 700 kg,

—an expanded polytetrafluoroethylene (ePTFE) membrane

—with or without electrical conductors,

—mounting bores for yawdrive,

—with 2, 5 or 7 control and power connection pins terminated with sensor temperature type of socket, with or without heater and fuse type of socket,

—a power of 11300 Wh or more, but not more than 29360 Wh

—a power of not more than 175 kWh,

—with or without a membrane bonded to the keyboard,

—a mounting flange for gearbox support,

—a nominal voltage of 320 V or more, but not more than 430 V

—with or without mono or multilayer protective film

—drivetrain mount,

—different screw sockets

0 %—31.12.20260.6144ex2835100050Sodium hypophosphite (CAS RN 7681-53-0) with a purity by weight of 97 % or more or as aqueous solution containing by weight 55 % or more but not more than 65 % of sodium hypophosphite0 %—31.12.20290.6482ex2841700050Hexaammonium heptamolybdate, anhydrous (CAS RN 12027-67-7) or as tetrahydrate (CAS RN 12054-85-2) with a purity by weight of 98 % or more0 %—31.12.20290.5936ex2841907020Potassium titanium oxide (CAS RN 12056-51-8) in powder form with a purity of 99 % or more0 %—31.12.20290.7097ex2842100060Aluminosilicate (CAS RN 1318-02-1) withfor use in the manufacture of copper zeolite or washcoat used in the automotive catalyst production^note0 %—31.12.20260.4529ex2903998028Fluorobenzene (CAS RN 462-06-6) with a purity by weight of 99 % or more0 %—31.12.20290.6560ex29049900781-Chloro-2-nitrobenzene (CAS RN 88-73-3) with a purity by weight of 99 % or more0 %—31.12.20290.6257ex29061900804-tert-Butylcyclohexanol (CAS RN 98-52-2) with a purity by weight of 97 % or more0 %—31.12.20290.5503ex29093039201,1′-Propane-2,2-diylbis[3,5-dibromo-4-(2,3-dibromopropoxy)benzene] (CAS RN 21850-44-2)0 %—31.12.20260.6649ex29093039301,1′-(1-Methylethylidene)bis[3,5-dibromo-4-(2,3-dibromo-2-methylpropoxy)]-benzene (CAS RN 97416-84-7)0 %—31.12.20300.7828ex29093039502-(1-Adamantyl)-4-Bromoanisole (CAS RN 104224-63-7) with a purity by weight of 99 % or more0 %—31.12.20290.4274ex29141990803-Methylbutanone (CAS RN 563-80-4) with a purity by weight of 97 % or more0 %—31.12.20270.4227ex2914390035Benzophenone (CAS RN 119-61-9) with a purity by weight of 99 % or more0 %—31.12.20270.7407ex2915909020Methyl (R)-2-fluoropropionate (CAS RN 146805-74-5)0 %—31.12.20270.7542ex2915909025Methyl octanoate (CAS RN 111-11-5), methyl decanoate (CAS RN 110-42-9) or methyl myristate (CAS RN 124-10-7)0 %—31.12.20290.6003ex2915909027Triethyl orthoformate (CAS RN 122-51-0) with a purity by weight of 99 % or more0 %—31.12.20290.5767ex29159090303,3-Dimethylbutyryl chloride (CAS RN 7065-46-5)0 %—31.12.20270.8154ex2915909033Ethyl 8-bromooctanoate (CAS RN 29823-21-0) with a purity by weight of 98 % or more0 %—31.12.20260.8423ex2915909043Trifluoroacetic anhydride (CAS RN 407-25-0) with a purity by weight of 98 % or more0 %—31.12.20270.6255ex2915909045Trimethyl orthoformate (CAS RN 149-73-5)0 %—31.12.20290.8457ex29159090533-Chloro-2,2-dimethylpropanoyl chloride (CAS RN 4300-97-4) with a purity by weight of 98 % or more0 %—31.12.20270.4954ex2915909060Ethyl-6,8-dichlorooctanoate (CAS RN 1070-64-0)0 %—31.12.20300.3638ex2918290085Hexamethylene bis[3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate] (CAS RN 35074-77-2) with a purity by weight of 97 % or more0 %—31.12.20290.3978ex29214200382-Nitroaniline (CAS RN 88-74-4) with a purity by weight of 99 % or more0 %—31.12.20290.2609ex2921450015N-1-Naphthylaniline (CAS RN 90-30-2) with a purity by weight of 98 % or more0 %—31.12.20290.4160ex2924190058N,N-Dimethylacrylamide (CAS RN 2680-03-7) with a purity by weight of 97 % or more0 %—31.12.20260.6266ex29242970592-(Trifluoromethyl)benzamide (CAS RN 360-64-5) with a purity by weight of 98 % or more0 %—31.12.20290.3526ex29251100401,2-Benzisothiazol-3(2H)-one 1,1-dioxide (CAS RN 81-07-2) or its sodium salt (CAS RN 128-44-9) or its sodium salt dihydrate (CAS RN 6155-57-3) with a purity by weight of 98 % or more0 %—31.12.20290.2661ex29280090733,3′-Bis(3,5-di-tert-butyl-4-hydroxyphenyl)-N,N′-bipropionamide (CAS RN 32687-78-8) with a purity by weight of 97 % or more0 %—31.12.20290.5918ex2928009078Aminoguanidinium hydrogen carbonate (CAS RN 2582-30-1) with a purity by weight of 99 % or more0 %—31.12.20290.8701ex2929909080Wet paste or powder0 %—31.12.20290.7464ex29336980482-(4,6-Bis-(2,4-dimethylphenyl)-1,3,5-triazin-2-yl)-5-(octyloxy)-phenol (CAS RN 2725-22-6) with a purity by weight of 98 % or more0 %—31.12.20290.8054ex29339980762-Methylindoline (CAS RN 6872-06-6) with a purity by weight of 98 % or more0 %—31.12.20260.4942ex29349990472,4-Diethyl-9H-thioxanthen-9-one (CAS RN 82799-44-8) with a purity by weight of 97 % or more0 %—31.12.20300.8830ex3809910030Aqueous antimony pentoxide mixture containing by weight:0 %—31.12.20290.3448ex38112100ex381190003860Solution of mineral oils (CAS RN 64742-52-5, 64742-53-6, 64742-56-9 or blends thereof) containing by weight:0 %—31.12.20290.2800ex3815120050Catalyst in the form of granules, wheels or ring-shaped structures0 %—31.12.20290.2783ex3815909060Dinonylnaphthalenedisulfonic acid (CAS RN 60223-95-2) with a content by weight of 50 % or more but not more than 65 %, in the form of a solution in isobutanol (CAS RN 78-83-1)0 %—31.12.20260.6672ex3906909028Mixture containing by weight:0 %—31.12.20300.5507ex3919908058Biaxially-oriented film of poly(methyl methacrylate), with a thickness of 20 μm or more but not more than 90 μm, covered on one side with an adhesive layer and a release sheet0 %—31.12.20290.7949ex3920610040Extruded thermoplastic foils or films of polycarbonate with:for use in the production of retroreflective products^note0 %—31.12.20300.7196ex3926909777Silicone decoupling ring with an inner diameter of 13,2 mm or more but no more than 17,2 mm, in immediate packings of 2500 pieces or more, of a kind used in car parking aid sensor systems0 %p/st31.12.20260.8024ex5911400010Non-wovens, consisting of poly(ethylene terephthalate) spun bonded media:with or without following treatments:0 %m²31.12.20290.5024ex83016000ex84199085ex84799070ex84819000ex84859090ex85030098ex85159080ex85371098ex85389099ex87089910ex870899973040305030434055705522Silicone or plastic keyboards, comprising:0 %p/st31.12.20300.8818ex8406810010Industrial steam turbine with:0 %—31.12.20290.8148ex8412907020Bedplate made of solution strengthened ductile iron castings (SSDI), for anchoring and aligning the drive train (gearbox, pedestal bearing, rotor shaft) of a wind turbine with:0 %p/st31.12.20270.8856ex8418999080An evaporator being a type of heat exchanger, consisting of aluminium pipes with copper ends enclosed with aluminium radiators:for use in the manufacture of products of subheadings 841810, 841821, 841840^note0 %—31.12.20290.4855ex85013390ex85014080ex85015350305010Electric drive for motor vehicles, with an output of not more than 315 kW:0 %—31.12.20260.4450ex8504318030Transformers, having a power handling capacity of not more than 1 kVA for use in the manufacture of static converters and goods of heading 8537^note0 %—31.12.20290.8660ex8507600026Modules for the assembly of electric accumulators using lithium ferrophosphate technology (LFP) with:1,3 %—31.12.20260.6753ex8507600077Lithium-ion rechargeable batteries, with:for use in the manufacture of vehicles of subheadings 8701 to 8705^note1,3 %—31.12.20260.8841ex8537109175Printed circuit board equipped with a microcontroller for operating and/or control purposesfor use in the manufacture of household appliances of subheadings 732111, 841460, 841810, 841821, 841829, 841840, 842211, 845011, 845012, 845019, 845020, 845121, 845129, 851660^note0 %—31.12.20290.6377ex85443000ex854442905375Electrical wiring harness or cable for the steering system:for use in the manufacture of power steering systems for motor vehicles^note0 %p/st31.12.20290.8292ex8708959950Airbag inflator containing pyrotechnics, whether or not cold gas, as propellant for safety airbags of vehicles, in each individual consignment of 1000 pieces or more0 %p/st31.12.20260.6572ex9002110085Lens withfor use in the manufacture of CMOS vehicle-mounted cameras or IP network cameras^note0 %—31.12.2029

(3)the following entries are inserted according to the numerical order of the CN and TARIC codes in the second and third columns:^noteSerial NumberCN codeTARICDescriptionRate of autonomous dutySupplementary UnitDate envisaged for mandatory review‘0.9085ex1515609920Microbial oil, refined or semi-refined, but not chemically modified, containing by weight in the form of triglycerides:

—35 % or more but not more than 70 % of arachidonic acid

—a shelf life declared by the manufacturer of not less than 12 months

—with nickel plated terminal pin and connector

—23 % or more but not more than 36 % of oxirane, 2-methyl-,polymer with oxirane, ether with bis(4-(bis(2-hydroxyethyl)amino)phenyl)(2-sulfophenyl)methyl (4:1), monosodium salt, block (CAS RN 126042-89-5),

—60 % or more but not more than 80 % of Oxirane, 2-methyl-,polymer with oxirane, ether with 2,2′,2′′,2′′′-(sulfonylbis(4,1-phenylene)-2,1-diazenediyl(3-methyl-4,1-phenylene)nitrilo))tetrakis(ethanol) (4:1) (CAS RN 927432-39-1), and

—a thickness of 0,3 mm or more, but not more than 0,4 mm,

—a thickness of 35 μm or more, but not more than 75 μm,

—a thickness of 2,0 mm or more but not more than 4,8 mm,

—with a twist of 410 TPM or more but not more than 1200 TPM,

—with final twist in Z direction;

—a linear density of 0,60 dtex or more but not more than 1,60 dtex,

—composed of metal base and agglomerated synthetic or natural diamonds,

—with a thickness of 0,10 mm or more but not more than 1,60 mm,

—2-(3,4-Dimethyl-1H-pyrazol-1-yl)succinic acid, and

—with an optical core made of germanium-doped silica glass (quartz), intended for the production of low-loss optical fiber:

—with a length of not more than 2500 mm,

—of modified epoxy resin with embedded glass fabric,

—consisting of at least one layer of fiberglass fabric impregnated with modified epoxy resin, without the use of halogenated flame retardants,

—20 % or more but not more than 25 % of beryllium (CAS 7440-41-7)

—with a power not exceeding 0,4 kW,

—a nominal voltage of 8 V or more, but not more than 13 V,

—one vertical pipe with inlet and outlet tubes,

—produced with high pressure precision die casting technology,

—made of DC03 steel or similar non alloy steel or free cutting steel,

—with metal contents of 87,5 % or more, but not more than 90,1 % by weight,

—made of DC03 steel or similar non-alloy steel or free cutting steel,

—a total length of 49,4 mm or more but not more than 210 mm,

—an output power of 1000 W or more, but not more than 1400 W,

—a back electromotive force constant (Ke) of 0,0265 V-sec/rad or more, but not more than 0,0293 V-sec/rad,

—with an outer diameter of 65 mm or more but not more than 80 mm,

—with an outer diameter of 90 mm or more but not more than 120 mm,

—an outer diameter of 52 mm or more but not more than 80 mm,

—produced with high pressure precision die casting technology,

—with a length of 27,7 mm or more but not more than 44,6 mm,

—mainly made of AISI 316L stainless steel,

—60 % or more but not more than 95 % of aluminum oxide (CAS RN 1344-28-1),

—a high-voltage connector,

—input and output connectors,

—a single core high voltage cable terminated with a flat lug,

—a length of 480,0 or more but not more than 630,0 mm,

—with a rated voltage of 250 V AC,

—an outer diameter of 97,35 mm or more, but not more than 102,65 mm,

—of a powder metal assembly,

—with an integrated safety locking mechanism,

—with thermal conductivity when cured of 3,45 W/(m·K) or more but not more than 3,55 W/(m·K),

—5 % or more but not more than 15 % of polyethylene-polypropylene glycol (CAS RN 9003-11-6), and

—40 % or more but not more than 60 % of oxirane, 2-methyl-, polymer with oxirane, ether with 2,2-[[3-methyl-4-[(4-methyl-2-benzothiazolyl)azo]phenyl]imino]bis[ethanol] (2:1) (CAS RN 229306-55-2), and

—90 % or more but not more than 99 % of oxirane, 2-methyl-,polymer with oxirane, ether with ethyl 3-(4-(bis(2-hydroxyethyl)amino)phenyl)-2-cyano-2-propenoate (2:1) (CAS RN 152286-82-3), and

—50 % or more but not more than 70 % of oxirane, methyl-polymer with oxirane, ether with bis(4-[bis(2-hydroxyethyl)amino)phenyl] (2-sulfophenyl)methyl (4:1), monosodium salt block (CAS RN 126042-89-5), and

—not more than 3 % by weight of docosahexaenoic acid

—4 % or more but not more than 20 % of polyethylene-polypropylene glycol (CAS RN 9003-11-6),

—20 % or more but not more than 40 % of polyethylene-polypropylene glycol (CAS RN 9003-11-6)

—minimum dimensions of 63 mm x 15 mm,

—a tensile strength of 40 MPa or more in the machine direction (MD) and 200 MPa or more in the transverse direction (TD),

—a thermal insulation of more than 0,25 Km²/W but not more than 0,4 Km²/W (according to ASTM-C518)

—with a linear density of 200 dtex or more but not more than 1500 dtex,

—with a linear density of 100 dtex or more, but not more than 4000 dtex

—a staple fibre length of 37 mm or more but not more than 44 mm,

—whether or not containing a hole in the centre,

—with a width of 500 mm or more but not more than 1200 mm,

—2-(4,5-Dimethyl-1H-pyrazol-1-yl)succinic acid

—with a diameter of 115 mm or more but not more than 139 mm,

—without halogenated flame retardants

—covered on one or both sides with copper foil with a thickness of 0,15 mm or less,

—77 % or more but not more than 83 % of antimony (CAS 7440-36-0)

—pre-filled with lubricant from 190 ml to 210 ml,

—a nominal maximum speed of 1400 rpm or more, but not more than 1950 rpm,

—a width of 297 mm or more, but not more than 373 mm,

—made of aluminium alloy (EN AC-46000 or EN AC-46000 S, according to the DIN EN 1706 and GB/T 16116 standards),

—with a pitch diameter of 67 mm or more but not more than 145 mm,

—with a pitch diameter of 60 mm or more, but not more than 130 mm,

—with an alloy solidus temperature of 210 °C or more,

—a starter motor pinion with 9 or more but not more than 16 teeth

—a rotor containing 8 poles, generated by permanent magnets composed mainly of praseodymium-neodymium-iron-boron (GB/T 13560-2017 standard), enclosed in a stainless steel cover,

—a back electromotive force (EMF) harmonic order – 5th of no more than 0,4 % (of fundamental) and 7th of no more than 0,2 % (of fundamental),

—with an inner diameter of 15 mm or more but not more than 25 mm,

—with an inner diameter of 65 mm or more but not more than 80 mm,

—a commutator copper wire diameter of 2 mm or more but not more than 4 mm

—made of aluminium alloy (EN 1706 grade AC-47100 or AC-47100 S or AC-46000 or AC-46000 S or AC-44300),

—with umbrella or drum design

—with a rated voltage of 230V,

—a metal flat lug with an eyelet in a plastic housing,

—5 % or more but not more than 15 % of aluminosilicate (CAS RN 1327-36-2),

—three or more plastic mounting clips

—a safety fuse for an electric current of 10 A or more but not more than 400 A,

—a width of 78,0 or more but not more than 233,0 mm and

—with a rated current of not more than 15 A,

—an inner diameter of 27,91 mm or more, but not more than 27,93 mm,

—with a diameter of not more than 90,95 mm,

—with a cassette architecture for integration with seat through screw connections,

—with continuous use temperature minimum range from -60^o C to 200^o C,

—85 % or more but not more than 95 % of oxirane, 2-methyl-,polymer with oxirane, ether with 5-(2-(4-(bis(2-hydroxyethyl)amino)-2-methylphenyl)diazenyl)-3-methyl-2,4-thiophenedicarbonitrile (2:1) (CAS RN 515857-23-5)

—40 % or more but not more than 60 % of polyethylene-polypropylene glycol (CAS RN 9003-11-6)

—1 % or more but not more than 10 % of polyethylene-polypropylene glycol (CAS RN 9003-11-6)

—30 % or more but not more than 50 % of polyethylene-polypropylene glycol (CAS RN 9003-11-6)

—with a viscosity of 178 Pa· s or more, but not more than 235 Pa· s,

—an elongation at break of 80 % or more,

—with an external diameter not more than 870 mm, for machines for the manufacture of semiconductor wafers^note

—a mica content of 80 g/m² or more but not more than 165 g/m²,

—on one side with a conical end

—with a TMA glass transition of 145 °C or more but not more than 200 °C (ASTM E1545)

—and with a TG of 145 °C or more but not more than 280 °C according to TMA, in agreement with IPC-4101/128 or 4101/130 or IPC-4101/153 or 4101/154

—suction and processing pipe inner diameter from 6,40 mm to 6,60 mm,

—a horizontal or vertical position of the fan blades shaft,

—a height of 154 mm or more, but not more than 158 mm,

—with sintered plain bearing

—not more than 2 % of platinum (CAS RN 7440-06-4),

—with an inner hole designed for bearing mounting or key mounting

—with an inner hole designed for bearing mounting

—a motor magnet shaft end outer diameter of 10,001 mm or more, but not more than 10,007 mm,

—a synchronous inductance of 33,49 μH or more, but not more than 37,01 μH,

—with a height of 30 mm or more but not more than 45 mm,

—whether or not with bearing

—with a rated power of 2000 W,

—three or more plastic mounting clips

—a flat copper conductor with surface insulation terminated with a flat lug,

—with heat capacity when cured of 0,75 J/g· K or more but not more than 0,85 J/g· K,

—a thickness of 0,75 or more but not more than 2,50 mm

—with an operating frequency of 50/60 Hz,

—a height of the hub of 11,75 mm or more, but not more than 12,00 mm,

—with an overall height of 24,5 mm,

—with a housing made of a magnesium die-cast alloy,

—25 % or more but not more than 30 % of oxirane, 2-methyl-,polymer with oxirane, ether with 2,2′-((3-methyl-4-((4-methyl-2-benzothiazolyl)azo)phenyl)imino)bis(ethanol)(2:1) (CAS RN 229306-55-2),

—maximum dimensions of 278 mm x 117 mm,

—an elongation at break of 400 % or more in MD and 30 % or more in TD,

—a dielectric strength of more than 3,0 Kv/mm but not more than 3,8 Kv/mm (according to ASTM-D149)

—with an average tenacity of 46 cN/tex or more,

—with an average minimum tenacity of 64 cN/tex;

—with a particle size of 40 μm or less,

—a tensile strength of 110 N/cm or more but not more than 130 N/cm

—on the other side with a handle with a diameter of 25,4 mm, coated at the end with aluminium oxide

—specified according to IPC-4101/128, 130, 153 or 154

—discharge pipe inner diameter from 4,80 mm to 5,00 mm,

—a boosting time of not more than 10 seconds,

—a depth of 17 mm or more, but not more than 23 mm,

—motor terminals located across the 37,00 mm radius and separated by an angle of 30,00 ^o,

—a cogging torque of not more than 15 mNm,

—with a weight of 0,5 kg or more but not more than 0,8 kg,

—with a weight of 0,7 kg or more but not more than 1,2 kg,

—not more than 2 % aluminum chloride hydroxide (CAS RN 12042-91-0),

—with a total heating element length of 217 mm or more, but not more than 223 mm,

—three or more plastic clips for attachment

—with a dielectric strength of 1500V AC for 1 minute,

—an overall height of 16,00 mm or more, but not more than 18,00 mm

—impregnated with sealant,

—with an anti-noise system,

—with volume resistivity when cured of 1010 Ω· m or more,

—5 % or more but not more than 10 % of oxirane, 2-methyl-,polymer with oxirane, ether with 5-(2-(4-(bis(2-hydroxyethyl)amino)-2-methylphenyl)diazenyl)-3-methyl-2,4-thiophenedicarbonitrile (2:1) (CAS RN 515857-23-5), and

—a weight of not more than 5 g per piece,

—a heat shrinkage (in water at 90 °C/10s) in MD of 0,49 % or more, but not more than 0,51 %,

—with an elongation at break of 13 % or more but not more than 23 %,

—with an elongation at break of 12 % or more, but not more than 28 %;

—a tenacity of 1 cN/dtex or more

—with a silver content either of 3,15 % or more, but not more than 3,5 % by weight for tin based paste or of 0,25 % or more, but not more than 0,28 % by weight for zinc based paste,

—a flatness tolerance of less than 2 mm for the fin pack within the condenser core,

—a motor housing made of ADC12 or EN AC46000 aluminium alloy die casting with composition of aluminium-silicon-copper (per JIS H5302-2000 or EN 1706 standard),

—a friction torque in ambient temperature of not more than 20 mNm,

—without windings

—with a heating element working length of 169,5 mm or more, but not more than 174,5 mm,

—containing a bleeder resistor with a resistance of 470 kΩ,

—zinc plated

—interfacing with car rail systems,

—not more than 0,2 % of hydrogen sulfide (CAS RN 7783-06-4)

—packaged in containers of 30 kg or more

—15 % or more but not more than 25 % of oxirane, 2-methyl-,polymer with oxirane, ether with ethyl 3-(4-bis(2-hydroxyethyl)amino)phenyl)-2-cyano-2-propenoate (2:1) (CAS RN 152286-82-3)

—a dynamic heat shrinkage (between 55 °C and 70 °C) in TD of not more than 20 percentage points,

—wound on a perforated dyeing tube,

—with a shrinkage in 98 °C of 0 % or more, but not more than 3,5 %;

—driven by a brushless DC motor,

—a cable with a length of 30 cm or more, but not more than 50 cm, with RAST 2,5 connector,

—with or without bismuth content of 2,55 % or more, but not more than 2,71 % by weight,

—containing three varistors: one with rated voltage of 680 V, one of 910 V and one of 1800 V, each ±10 %,

—without electronic control unit,

—a light transmittance of 85 % or more,

—with a weight, including tube, of 900 g or more

—wound on the perforated dyeing tube with 0,9 kg of yarn or more ready for dyeing

—cooling capacity from 340 to 360 W at ASHRAE LBP 3000 rpm,

—a nominal power of 0,7 W or more, but not more than 3,5 W,

—a weight of 224 g or more, but not more than 283 g

—a maximum motor operation temperature of not more than 200 °C,

—with a mounting flange diameter of 28 mm or more, but not more than 32 mm,

—with or without copper content of 0,6 % or more, but not more than 0,7 % by weight

—a haze ratio of not more than 6 %,

—displacement from 6,5 cm³ to 7,5 cm³,

—a tacho or feedback signal to monitor the speed

—with a heating element bending radius of 10,75 mm,

—mounted with an M8 screw with an average breaking force of 93 kgf/cm

—without semiconductors,

—a surface tension of 38 mN/m or more,

—speed range from 1600 rpm to 4200 rpm^note

—equipped with thermal fuses,

—with a weight of 1475 g or more, but not more than 1619 g

—a density of 1,30 g/cm³ or more, but not more than 1,34 g/cm³,

—without a built-in NTC sensor,

0 %—31.12.20300.9064ex2904990075Trifluoromethanesulfonic acid (CAS RN 1493-13-6) with a purity by weight of 99 % or more0 %—31.12.20300.9088ex2905299050Prop-2-yn-1-ol (CAS RN 107-19-7) with a purity by weight of 99 % or more0 %—31.12.20300.9071ex2921430045α,α,α-Trifluoro-o-toluidine (CAS RN 88-17-5) with a purity by weight of 98 % or more0 %—31.12.20300.9016ex2922290053m-Anisidine (CAS RN 536-90-3) with a purity by weight of 95 % or more0 %—31.12.20300.9012ex29242970444-(2,2-Diethoxyacetyl)-3,5-difluoro-N-methylbenzamide (CAS RN 3089027-90-4) with a purity by weight of 95 % or more0 %—31.12.20300.9010ex2928009068Ethyl hydrazinoacetate hydrochloride (CAS RN 6945-92-2) with a purity by weight of 98 % or more0 %—31.12.20300.9006ex29309095224,4,5,5,5-Pentafluoropentyl carbamimidothioate-methanesulfonate (1:1) (CAS RN 1107606-68-7) with a purity by weight of 99 % or more0 %—31.12.20300.9011ex2930909524Trimethyloxosulfonium chloride (CAS RN 5034-06-0) with a purity by weight of 98 % or more0 %—31.12.20300.9004ex2931900021(2-Fluoro-4-phenoxyphenyl)boronic acid (CAS RN 1414356-30-1) with a purity by weight of 95 % or more0 %—31.12.20300.9013ex2932190038(2,2-Diphenyltetrahydrofuran-3-yl)methanol (CAS RN 93651-75-3) with a purity by weight of 98 % or more0 %—31.12.20300.9015ex29331990783-(3-Methyl-5-oxo-4,5-dihydro-1H-pyrazol-1-yl)benzenesulfonic acid (CAS RN 119-17-5) with a purity by weight of 95 % or more0 %—31.12.20300.9075ex2933199083Isomeric mixture containing by weight 97 % or more of the two isomers(CAS RN 2241455-89-8)0 %—31.12.20300.9008ex29333999195-Chloro-1-(4-piperidyl)-1H-benzimidazol-2(3H)-one (CAS RN 53786-28-0) with a purity by weight of 99 % or more0 %—31.12.20300.9060ex2933399994Cyantraniliprole (ISO) (CAS RN 736994-63-1) with a purity by weight of 90 % or more0 %—31.12.20300.8997ex29335995353-Iodo-1H-pyrazolo[3,4-d]pyrimidin-4-amine (CAS RN 151266-23-8) with a purity by weight of 98 % or more0 %—31.12.20300.9061ex2933599540Pirimiphos-methyl (ISO) (CAS RN 29232-93-7) with a purity by weight of 90 % or more0 %—31.12.20300.9058ex2933698038Tris({[1,1′-biphenyl]-4-yl})-1,3,5-triazine (CAS RN 31274-51-8) with a purity by weight of 97 % or more0 %—31.12.20300.9009ex29339980831-(3-Chloropropyl)-1,3-dihydro-2H-benzimidazol-2-one (CAS RN 62780-89-6) with a purity by weight of 97 % or more0 %—31.12.20300.8994ex2933998084Allyl (2S,4S)-4-benzoylsulfanyl-2-(dimethylcarbamoyl)pyrrolidine-1-carboxylate (CAS RN 141818-73-7) with a purity by weight of 96 % or more0 %—31.12.20300.8996ex2934999032(6R,7R)-Benzhydryl 3-hydroxy-8-oxo-7-(2-phenylacetamido)-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylate (CAS RN 54639-48-4) with a purity by weight of 95 % or more0 %—31.12.20300.9005ex2934999034Benzyl 4-(oxetan-3-yl)piperazine-1-carboxylate (CAS RN 1254115-22-4) with a purity by weight of 99 % or more0 %—31.12.20300.9007ex2934999036Nadide phosphate (INNM) disodium salt (CAS RN 24292-60-2) with a purity by weight of 97 % or more0 %—31.12.20300.8993ex2934999046(6R-trans)-7-Amino-8-oxo-3-[[(1,2,5,6-tetrahydro-2-methyl-5,6-dioxo-1,2,4-triazin-3-yl)thio]methyl]-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid (CAS RN 58909-56-1) with a purity by weight of 97 % or more0 %—31.12.20300.9056ex3204170032Colourant C.I. Pigment Violet 23 (CAS RN 215247-95-3) and preparations based thereon with a colourant C.I. Pigment Violet 23 content of 70 % or more by weight0 %—31.12.20300.9074ex3810100010Tin or zinc based, halide free, surface mount technology processing solder paste:0 %—31.12.20300.9073ex3815120040Catalyst used to obtain paraxylene and orthoxylene by isomerization of methaxylene containing by weight:0 %—31.12.20300.9086ex3815199033Catalyst, in powder form, consisting of a mixture of metal oxides fixed to a silicon dioxide support, with a total content by weight of molybdenum, bismuth and iron of 20 % or more but not more than 50 %, for use in the manufacture of acrylonitrile^note0 %—31.12.20300.9062ex3824999638Low outgassing thermally conductive silicone paste:0 %—31.12.20300.8999ex3902909063Hydrogenated poly(1-octene) (CAS RN 70693-43-5)0 %—31.12.20300.9078ex3907292063Preparation containing by weight0 %—31.12.20300.9079ex3907292065Preparation containing by weight0 %—31.12.20300.9077ex3907292068Preparation containing by weight0 %—31.12.20300.9081ex3907292070Preparation containing by weight0 %—31.12.20300.9082ex3907292073Preparation containing by weight of0 %—31.12.20300.9080ex3907292075Preparation containing by weight0 %—31.12.20300.9001ex3919908057Self-adhesive polycarbonate film, printed, whether or not arched, with:intended for integration into combined instrument panels of passenger cars0 %—31.12.20300.9057ex3920621970Poly(ethylene terephthalate) film in rolls with:0 %—31.12.20300.9055ex3921190053Sheets of closed-cell silicone foam with:0 %—31.12.20300.9048ex5401101410Core yarn of high tenacity polyester filament surrounded by polyester staple fibres:0 %—31.12.20300.9003ex5402200007High tenacity polyester multifilament yarn:0 %—31.12.20300.9063ex5503900040Staple fibres with a poly(ethylene terephthalate) core fully encapsulated by polyethylene with:0 %—31.12.20300.8939ex5603948050Needle-punched spunbond nonwovens, consisting of polyamide fibres individually coated with polyvinylalcohol, containing by weight 20 % or more but not more than 40 % of polyvinylalcohol weighing 400 g/m² or more0 %—31.12.20300.9053ex6804210050Wheels suitable for grinding, rounding, polishing, aligning or cutting:–0 %—31.12.20260.8998ex6814100020Phlogopite mica tape bonded with silicone resin to a glass fabric reinforced polyethylene film,0 %—31.12.20300.9059ex7002209010Cylindrical shaped glass preforms of high-purity silica glass (quartz):0 %—31.12.20300.9054ex7019610060Flexible prepreg in sheets or rolls,0 %—31.12.20300.9087ex7410210065Sheets or Plates0 %—31.12.20300.9049ex8110900010Antimony-Beryllium pellets containing by weight:0 %—31.12.20300.9018ex8414302060Hermetic compressor for R290 refrigerant for the production of refrigerators and freezers:–0 %—31.12.20300.9045ex8414593550DC motor centrifugal fan with:0 %p/st31.12.20300.9044ex8418999070Household appliances condenser, being a type of heat exchanger, made entirely of aluminium A3102, A3003, A4045 or A4343, consisting of two vertical pipes and arranged horizontally between them 16 parallel flat tubes with fins, with:0 %—31.12.20300.9023ex8483308030Commutator end shield (bearing housing with plain shaft bearing) for starter motors of passenger cars and commercial vehicles0 %—31.12.20300.9040ex8483508050Metal spinned single or double pulley:0 %—31.12.20300.9039ex8483508060Metal spinned triple pulley:0 %—31.12.20300.9025ex8483608020Overrunning clutch for passenger car and commercial vehicle starter motors with:0 %—31.12.20300.9037ex8501522055Brushless synchronous alternating current electric motors with permanent magnets, with:0 %p/st31.12.2030with or without a spline on the motor shaft0.9020ex8503002020Plated steel core of the electric motor rotor of electric air conditioning compressors for motor vehicles:0 %—31.12.20300.9019ex8503002030Plated steel core of the electric motor stator of electric air conditioning compressors for motor vehicles:0 %—31.12.20300.9021ex8503009845Armature for the electric motor in starter motors of passenger cars and commercial vehicles with:0 %—31.12.20300.9026ex8511900020Drive end shield for starter motors and alternators of passenger cars and commercial vehicles0 %—31.12.20300.9022ex8511900030Commutator for passenger car and commercial vehicle starter motors0 %—31.12.20300.9043ex8516808010Electric heating resistor with a triple loop design:0 %—31.12.20300.9014ex8544300023High-voltage single-core battery supply cable fitted with:for use in the manufacture of rechargeable batteries for hybrid and electric vehicles^note0 %—31.12.20300.9000ex8544300033Wiring harness for transmitting safety parameters from battery modules fitted with:for use in the manufacture of rechargeable batteries for hybrid and electric vehicles^note0 %—31.12.20300.9002ex8544300043High voltage battery cable assembly, comprising:for use in the manufacture of rechargeable batteries for hybrid and electric vehicles^note0 %—31.12.20300.9027ex8547900010Li-ion battery module component made of mica for fire protection, with a specially designed shape for the top and sides with:1,85 %—31.12.20260.9038ex8548009045Electromagnetic Interference filter designed to eliminate conducted electromagnetic interference from a power line,0 %—31.12.20300.9033ex8708949980Blank assembly worm gear, consisting of a hub of carbon steel (GB/T 699 grade 25 or DIN EN 10277 grade 11SMn30) and a ring of cast polyamide 6/12 with:0 %—31.12.20300.9029ex8708999727Inner pole electromagnet core used in Magneto-Rheological engine mounts to reduce shocks and for isolation and damping in passenger cars:0 %—31.12.20300.9030ex9401992030Latch seat system modules enabling seat sliding, latching and unlatching in random, independent positions along the rails:0 %—31.12.2030

Article 1#

Article 2#

Article 1 #

Article 2 #