law://eu/reg/2025/2498@2026-11-14THE EUROPEAN COMMISSION,Having regard to the Treaty on the Functioning of the European Union,Having regard to Regulation (EC) No 1831/2003 of the European Parliament and of the Council of 22 September 2003 on additives for use in animal nutritionnote, and in particular Article 9(2) thereof,Whereas:
HAS ADOPTED THIS REGULATION:
| Identification number of the feed additive | Name of the Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | Minimum content | Maximum content | Other provisions | End of period of authorisation |
|---|---|---|---|---|---|---|---|---|
| mg of the additive /kg of complete feedingstuff with a moisture content of 12 % | ||||||||
| Category: sensory additives. Functional group: flavouring compounds | ||||||||
| 2b13010 | 4-hydroxy– 2,5-dimethylfuran-3(2H)-one | Additive composition4-Hydroxy-2,5-dimethylfuran-3 (2H)-oneCharacterisation of active substance4-Hydroxy-2,5-dimethylfuran-3 (2H)-oneProduced by chemical synthesisPurity: 98 %Chemical formula: C6H8O3CAS number: 3658-77-3FLAVIS: 13.010Analytical methodnoteFor the identification of the additive in mixtures of flavourings:Gas chromatography mass spectrometry with retention time locking GC-MS-RTL. | All animal species, except cats and dogs | - | - | - | 1. The additive shall be incorporated into the feed in the form of a premixture.2. In the directions for use of the additive and premixtures, the storage conditions and stability to heat treatment shall be indicated.3. On the label of the additive the following shall be indicated: Recommended maximum content of the active substance per kg of complete feedingstuff with a moisture content of 12 %: all animal species, except cats and dogs: 10 mg4. The functional group, the identification number, the name and the added amount of the active substance shall be indicated on the label of the premixture, where the use level on the label of the premixture would result in exceeding the level referred to in point 3.5. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks by inhalation, dermal contact or eyes contact. Where those risks cannot be eliminated by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including skin, eye and breathing protection. | 1 January 2036 |
Source: EUR-Lex, © European Union, 1998-2026. Reuse authorised under Decision 2011/833/EU.