(8)the following point 4 is added:‘4.Technical requirements to enable periodic roadworthiness tests4.1.PurposeThe purpose shall be to verify the following features of the eCall system:
(a)its correct operational status, by visual observation of the failure warning signal status following the activation of the vehicle master control switch and any bulb check. Where the failure warning signal is only displayed in a common space (the area on which two or more information functions or symbols may be displayed, but not simultaneously), it must be checked first that the common space is functional prior to the failure warning signal status check;
(b)the correct accuracy of the Minimum Set of Data (by generating and reading current MSD), the correct function and condition of the eCall components and the backup-battery (if applicable), by the use of an electronic vehicle interface;
(c)the software integrity, by external verification of version information, hash values and system configurations against reference data;
(d)the correct functionality of the voice communication, by performing an audio echo and speaker test using the vehicle interface.
4.2.Requirements4.2.1.The 112-based eCall in-vehicle system shall be able to provide the information to perform the methods of testing specified in Section 3, point 7.13, of Annex I to Directive 2014/45/EU using the electronic vehicle interface.4.2.2.The manufacturer shall make available the technical information, which shall contain the instructions for reading out the information or performing the checks related to each item specified in Section 3, point 7.13, of Annex I to Directive 2014/45/EU.4.3.Test procedure4.3.1.It shall be verified that the information related to each item specified in Section 3, point 7.13 of Annex I to Directive 2014/45/EU, can be read out from the eCall system using the electronic vehicle interface according to the instructions of the manufacturer.4.3.2.It shall be verified that an echo and speaker test can be performed to check the correct functionality of the voice communication via the vehicle interface.’.