Council Regulation (EU) 2025/1292

Contents

THE COUNCIL OF THE EUROPEAN UNION,Having regard to the Treaty on the Functioning of the European Union, and in particular Article 31 thereof,Having regard to the proposal from the European Commission,Whereas:

(1)In order to ensure a sufficient supply of certain agricultural and industrial products which are produced in insufficient quantities in the Union and thereby avoid any disturbances on the market for those products, autonomous tariff quotas of the Union (‘quotas’) were opened by Council Regulation (EU) 2021/2283^note. Within those quotas, products can be imported into the Union at reduced or zero duty rates.

(2)As it is in the Union’s interest to ensure an adequate supply of certain industrial products, and having regard to the fact that identical, equivalent or substitute products are not produced in sufficient quantities within the Union, it is necessary to open new quotas with order numbers 09.2010, 09.2017, 09.2024, 09.2025, 09.2027, 09.2029, 09.2031 at zero duty rates for appropriate quantities of those products, as of 1 July 2025.

(3)As the scope of the quota with order number 09.2585 has become inadequate to fulfil the needs of economic operators in the Union, TARIC codes 3907610020 and 3907690020 should be added to this quota as of 1 July 2025.

(4)As it is no longer in the Union’s interest to maintain the quotas with order numbers 09.2563, 09.2808, and 09.2925, those quotas should be closed with effect from 1 July 2025.

(5)In response to the Russian Federation’s ongoing war of aggression against Ukraine and the continued involvement of the Republic of Belarus in actions undermining Ukraine’s sovereignty and territorial integrity, the Union has adopted restrictive measures aimed at limiting trade benefits granted to Russia and Belarus. Council Regulation (EU) 2022/2563^note introduced an exception to the application of customs duties under autonomous tariff quotas for certain products originating in Russia and Belarus, specifically for quotas with order numbers 09.2600, 09.2742, 09.2698, and 09.2835, covering products falling under TARIC codes ex2712903910, ex2926100010, ex3204170030, and ex7604291030, respectively. Given the persistence of the geopolitical situation and the need to reinforce the effectiveness of the Union’s response, it is appropriate to discontinue that exception and to reinstate the application of customs duties on imports originating in Russia and Belarus under those quotas. Taking that measure ensures consistency with the Union’s restrictive trade policy and prevents economic benefits from being conferred upon entities operating in or supporting actions contrary to international law.

(6)Taking into account the amendments to be made and for the sake of clarity, the Annex to Regulation (EU) 2021/2283 should be replaced.

(7)Regulation (EU) 2021/2283 should therefore be amended accordingly.

(8)In order to avoid any interruption in the application of the quota scheme and to comply with the guidelines set out in the communication from the Commission of 13 December 2011 concerning autonomous tariff suspensions and quotas, the changes provided for in this Regulation regarding the quotas for the products concerned should apply from 1 July 2025. This Regulation should therefore enter into force as a matter of urgency,

HAS ADOPTED THIS REGULATION:

Article 1 #

Regulation (EU) 2021/2283 is amended as follows:

(1)in Article 1, paragraph 4 is replaced by the following:‘4.The suspension laid down in paragraph 2 does not apply to products originating in Russia or in Belarus, including for quota order numbers 09.2600, 09.2742, 09.2698, and 09.2835. Consequently, imports of such products originating in Russia and Belarus shall be subject to the Common Customs Tariff duties as from 1 July 2025.’;

(2)the Annex is replaced by the text set out in the Annex to this Regulation.

Article 2 #

This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union.It shall apply from 1 July 2025.

^note^note^noteOrder numberCN codeTARICDescriptionQuota periodQuota volumeQuota duty rate09.2849ex0710806910Mushrooms of the species Auricularia polytricha (uncooked or cooked by steaming or boiling), frozen, for the manufacture of prepared meals^note^note1.1.-31.12.700 tonnes0 %09.2913ex24011035ex24011070ex24011095ex24011095ex24011095ex24012035ex24012070ex24012095ex24012095ex2401209591101121919110112191Natural unmanufactured tobacco, whether or not cut in regular size, having a custom value of not less than EUR 450 per 100 kg net weight, for use as binder or wrapper for the manufacture of goods falling within subheading 24021000^note1.1.-31.12.3000 tonnes0 %09.282827122090Paraffin wax containing by weight less than 0,75 % of oil1.1.-31.12.180000 tonnes0 %09.2600ex2712903910Slack wax (CAS RN 64742-61-6)1.1.-31.12.100000 tonnes0 %09.2578ex2811198050Sulphamidic acid (CAS RN 5329-14-6) with a purity by weight of 95 % or more, whether or not with not more than 5 % addition of the anti-caking agent silicon dioxide (CAS RN 112926-00-8)1.1.-31.12.27000 tonnes0 %09.2928ex2811220040Silica filler in the form of granules, with a purity by weight of 97 % or more of silicon dioxide1.1.-31.12.1700 tonnes0 %09.2806ex2825904030Tungsten trioxide, including blue tungsten oxide (CAS RN 1314-35-8 or CAS RN 39318-18-8)1.1.-31.12.12000 tonnes0 %09.2819ex2833250030Copper hydroxide sulfate (Cu4(OH)6(SO4)), hydrate (CAS RN 12527-76-3) with a purity by weight of 98 % or more1.1.-31.12.240000 kilograms0 %09.2872ex2833298040Caesium sulphate (CAS RN 10294-54-9) in solid form or as aqueous solution containing by weight 48 % or more but not more than 52 % of caesium sulphate1.1.-31.12.400 tonnes0 %09.2567ex2903220010Trichloroethylene (CAS RN 79-01-6) with a purity by weight of 99 % or more1.1.-31.12.11885000 kilograms0 %09.2837ex2903793020Bromochloromethane (CAS RN 74-97-5)1.1.-31.12.600 tonnes0 %09.2933ex29039980301,3-Dichlorobenzene (CAS RN 541-73-1)1.1.-31.12.2600 tonnes0 %09.2700ex2905120010Propan-1-ol (propyl alcohol) (CAS RN 71-23-8)1.1.-31.12.15000 tonnes0 %09.2551ex2905299040Prop-2-yn-1-ol (CAS RN 107-19-7) with a purity by weight of 99 % or more1.1.-31.12.150 tonnes0 %09.2830ex2906190040Cyclopropylmethanol (CAS RN 2516-33-8)1.1.-31.12.20 tonnes0 %09.2851ex2907120010O-cresol (CAS RN 95-48-7) having a purity of not less than 98,5 % by weight1.1.-31.12.20000 tonnes0 %09.2704ex29094980202,2,2′,2′-Tetrakis(hydroxymethyl)-3,3′-oxydipropan-1-ol (CAS RN 126-58-9)1.1.-31.12.500 tonnes0 %09.2010ex2912290075Cyclohex-3-ene-1-carbaldehyde (CAS RN 100-50-5) with a purity by weight of 98 % or more1.7.-31.12.77500 kilograms0 %09.2565ex2914199070Calcium acetylacetonate (CAS RN 19372-44-2) with a purity by weight of 95 % or more1.1.-31.12.400 tonnes0 %09.2852ex2914290060Cyclopropyl methyl ketone (CAS RN 765-43-5)1.1.-31.12.300 tonnes0 %09.2638ex2915210010Acetic acid (CAS RN 64-19-7) of a purity by weight of 99 % or more1.1.-31.12.1000000 tonnes0 %09.267929153200Vinyl acetate (CAS RN 108-05-4)1.1.-31.12.370000 tonnes0 %09.2728ex2915907085Ethyl trifluoroacetate (CAS RN 383-63-1)1.1.-31.12.400 tonnes0 %09.2665ex2916199530Potassium (E,E)-hexa-2,4-dienoate (CAS RN 24634-61-5)1.1.-31.12.8250 tonnes0 %09.2684ex29163990282,5-Dimethylphenylacetyl chloride (CAS RN 55312-97-5)1.1.-31.12.700 tonnes0 %09.2599ex2917110040Diethyl oxalate (CAS RN 95-92-1)1.1.-31.12.500 tonnes0 %09.2769ex2917139010Dimethyl sebacate (CAS RN 106-79-6)1.1.-31.12.1000 tonnes0 %09.2634ex2917198040Dodecanedioic acid (CAS RN 693-23-2), of a purity by weight of more than 98,5 %1.1.-31.12.8000 tonnes0 %09.2540ex2917370010Dimethyl terephthalate (CAS RN 120-61-6) with a purity by weight of 95 % or more1.1.-31.12.57500 tonnes0 %09.2017ex2918110020L-(+)-lactic acid (CAS RN 79-33-4) with a purity by weight of 99 % or more, for use in the manufacturing of:

—esters and other derivatives (i.e. products obtained from a chemical reaction with the formation of new intramolecular bonds), or

—60 % or more but not more than 90 % of 2-chloropropene (CAS RN 557-98-2),

—containing by weight 17,5 % or more, but not more than 20 % of hydroxyl groups, and

—a loss on drying of not more than 15 % by weight (4h at 105 ^oC),

—a weight average molecular weight (Mw) of not more than 900000,

—EN 4364 (MIL-P-5425E) and DTD5592A, or

—of combed fibres,

—with three layers,

—consisting of at least one layer of fibreglass fabric impregnated with epoxide resin,

—of an alloy conforming to standards 5182-H19 or 5052-H19,

—of purity by weight of 98 % or more, but not more than 99,5 %, and

—a sieve passing fraction at a mesh width of 500 μm of more than 99 % by weight, and

—no other components,

—made of nickel-based superalloys,

—milled threaded fittings with a diameter of 10 mm or more but not more than 36,8 mm, and

—with a heat resistance up to 400 ^oC,

—made of 100Cr6 steel or 100CrMnSi6-4 steel (ISO 3290),

—continuously or centrifugally cast,

—14 mm or more but not more than 77 mm for the inner ring,

—made of flat-rolled steel,

—made of flat rolled steel,

—a DC motor of an output not exceeding 600 W,

—a sieve passing fraction at a mesh width of 250 μm of more than 75 % by weight and at a mesh width of 500 μm of more than 99 % by weight, and

—with a nominal output of 180 W or more,

—whether or not overmolded with polymers,

—a length of 5 mm or more, but not more than 60 mm,

—whether or not coated or passivated with a surface treatment,

—a length of 13,8 mm or more but not more than 45,2 mm,

—a width of 9,1 mm or more but not more than 10,5 mm,

—curved TFT LCD display (radius 750 mm) with touch-sensitive surfaces,

—a printed circuit board with a microprocessor and a sound amplifier,

—stepping motors,

—10,0 % or more but not more than 11,3 % of 5-chloro-2-methyl-2H-isothiazol-3-one,

—more than 20 % but not more than 50 % by weight 4-monononyldiphenylamine, and

—70 % or more of 2,5-bis(tert-nonyldithio)-[1,3,4]-thiadiazole (CAS RN 89347-09-1), and

—55 % or more but not more than 78 % of dimethyl gluterate (CAS RN 1119-40-0),

—75 % or more of sterols,

—49 % or more but not more than 50 % of bis[3-(triethoxysilyl)propyl] polysulphides (CAS RN 211519-85-6), and

—solutions produced under GMP (Good Manufacturing Practice) conditions to be supplied to the pharmaceutical industry

—8 % or more but not more than 14 % of (Z)-1-chloropropene (CAS RN 16136-84-8),

—with a median particle size (D50) of more than 0,6 mm

—a water-insoluble fraction of not more than 2 % by weight, calculated on the dry weight

—an endotoxin level of not more than 0,008 Endotoxin units (EU)/mg,

—EN 4365 (MIL-P-8184) and DTD5592A

—with an average fibre length of 36,5 mm or more,

—one outer layer consists of acrylic fabric,

—covered on one or both sides with copper foil with a thickness of not more than 0,15 mm,

—in rolls with an outside diameter of minimum 1250 mm but not more than 1350 mm,

—with a particle size of 0,2 mm or more but not more than 0,8 mm

—a melting point of 49 ^oC or more, but not more than 54 ^oC,

—a hardness of 52 HRB or more,

—for an operating temperature of more than 600 K but not more than 1600 K,

—drilled fuel channels with a diameter of 3,5 mm or more but not more than 10 mm,

—with a hole of 30 mm or more but not more than 300 mm for the insertion of the compressor wheel,

—with a deviation of 0,5 mm or less as determined with the FBHmethod

—turned,

—26 mm or more but not more than 101 mm for the outer ring,

—with a diameter of 14,5 mm or more but not more than 420 mm,

—with tensile strength of 270 MPa or more,

—for usage with a supply voltage of 8 V or more but no more than 48 V,

—a melting point of 110 ^oC or more, but not more than 125 ^oC,

—with an input power of 150 W or more but not more than 2700 W,

—whether or not coated or passivated with a surface treatment,

—a width of 5 mm or more, but not more than 40 mm,

—whether or not covered with zinc,

—a width of 7,8 mm or more but not more than 25,2 mm,

—a length of 20 mm or more but not more than 30,1 mm,

—microprocessors and memory chips,

—a connector,

—analog pointers and dials,

—3,0 % or more but not more than 4,1 % of 2-methyl-2H-isothiazol-3-one,

—more than 50 % but not more than 80 % by weight 4,4′-dinonyldiphenylamine,

—10 % or more of 5-(tert-nonyldithio)- 1,3,4-thiadiazole-2(3H)-thione (CAS RN 97503-12-3),

—10 % or more but not more than 30 % of dimethyl adipate (CAS RN 627-93-0), and

—not more than 25 % of stanols,

—50 % or more but not more than 51 % of carbon black (CAS RN 1333-86-4),

—a combined concentration of isothiazolones (CAS RN 55965-84-9) of 13,0 % or more but not more than 15,4 %,

—casting defects size of not more than 0,4 mm and not more than 10 defects per cm²,

—with a length of not more than 500 mm,

—containing by weight 35 % or more, but not more than 38 % of zinc,

—the male part including rivets,

—with motor connection (plug-in connection),

—with an external diameter of more than 44,8 but not more than 135,2 mm,

—a thickness of 3 mm or more, but not more than 15 mm,

—in the shape of rectangles,

—a height of 1,3 mm or more but not more than 4,7 mm,

—acoustic module and loudspeaker,

—a total percentage of 2,4-dinonyldiphenylamine and 2,4′-dinonyldiphenylamine of not more than 15 % by weight,

—a plastic housing,

—or without microprocessor control board,

—not more than 35 % of dimethyl succinate (CAS RN 106-65-0)

—5 % or more but not more than 23 % of 2-chloropropane (CAS RN 75-29-6),

—an ethanol content of not more than 1 % by weight,

—produced through the compact ring spinning process with pneumatic compression,

—the other outer layer consists of polyester fabric,

—with a dielectric constant (DK) of less than 5,4 at 1 MHz, as measured according to IPC-TM-650 2.5.5.2,

—of a thickness (tolerance -0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm,

—18 % or more but not more than 22 % of nitrates, calculated as sodium nitrate, and

—containing by weight 0,75 % or more, but not more than 1,25 % of lead,

—the female part including holes,

—whether or not with position sensor,

—with a rated speed of more than 10000 rpm but not more than 50000 rpm,

—connections for CAN, 3 x LIN bus, LVDS and Ethernet,

—with or without a metal holder,

—or without LED indicators or LCD display,

—not more than 6 % of 3-chloropropene (CAS RN 107-05-1), and

—an isopropanol content of not more than 0,5 % by weight

—with a tear strength of 26,5 cN/tex or more (according to ISO 2062:2009, at a speed of 5000 mm/min)

—the middle layer consists of chlorobutyl rubber,

—with a loss tangent of less than 0,035 at 1 MHz, as measured according to IPC-TM-650 2.5.5.2,

—of a width (tolerance ±0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm,

—a dendrite arm space in combustion chamber of not more than 25 μm,

—with a width of not more than 900 mm,

—5 % or more but not more than 8 % of chlorides, calculated as sodium chloride

—whether or not equipped with air-inducting ventilator,

—for operating various functions (e.g. chassis, lighting) and

—showing at least:

—speed,

—engine revolutions,

—engine temperature,

—the fuel level,

—communicating via CAN-BUS and/or K-LINE protocols,

—not more than 1 % of ethyl chloride (CAS RN 75-00-3)

—the middle layer has a weight of 452 g/m2 or more but not more than 569 g/m2,

—with a comparative tracking index (CTI) of 600 or more

—having a camber tolerance of not more than 0,4 mm/750 mm,

—a double deck water jacket design,

—with a height of not more than 1300 mm

—containing by weight 1,0 % or more, but not more than 1,4 % of aluminium, and

—whether or not with integrated control and power electronics,

—the textile fabric has a total weight of 952 g/m2 or more but not more than 1159 g/m2, and

—of a flatness measurement: I-unit ±4,

—a weight of 14 kg or more but not more than 19 kg,

—with a tensile strength of 415 Pa or more,

—whether or not with spring mechanism for resetting the lever,

—whether or not with mechanical device (pinion, screws, gear connection etc.) on the shaft,

—for situation-related display of vehicle and navigation data (e.g. speed, odometer, charge level of the drive battery),

—the textile fabric has a total thickness of 0,8 mm or more but not more than 4 mm,

—having a tensile strength of more than (5182-H19) 365 MPa or (5052-H19) 320 MPa, and

—a length of 506 mm or more but not more than 510 mm,

—built in a housing with reduction gear and lever attached to the motor drive shaft, or

—of an elongation A50 of more than (5182-H19) 3 % or (5052-H19) 2,5 %,

—a height of 282 mm or more but not more than 286 mm and

—built in a housing with threads integrated into the rotor of the motor for linear movement of the integrated control rod

—a width of 143,7 mm or more but not more than 144,3 mm

1.7.-31.12.27500 tonnes0 %09.2646ex2918290075Octadecyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate (CAS RN 2082-79-3) with:for use in the manufacture of PVC processing stabilizer-one packs based on powder mixtures (powders or press granulates)^note1.1.-31.12.380 tonnes0 %09.2647ex2918290080Pentaerythritol tetrakis(3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate) (CAS RN 6683-19-8) with:for use in the manufacture of PVC processing stabilizer-one packs based on powder mixtures (powders or press granulates)^note1.1.-31.12.140 tonnes0 %09.2975ex2918300010Benzophenone-3,3′,4,4′-tetracarboxylic dianhydride (CAS RN 2421-28-5)1.1.-31.12.1000 tonnes0 %09.2598ex2921199975Octadecylamine (CAS RN 124-30-1)1.1.-31.12.400 tonnes0 %09.2649ex2921290060Bis(2-dimethylaminoethyl)(methyl)amine (CAS RN 3030-47-5)1.1.-31.12.1700 tonnes0 %09.2617ex29214200894-Fluoro-N-(1-methylethyl)benzeneamine (CAS RN 70441-63-3)1.1.-31.12.500 tonnes0 %09.2602ex2921511910O-phenylenediamine (CAS RN 95-54-5)1.1.-31.12.1800 tonnes0 %09.2921ex29221900222-(dimethylamino)ethyl acrylate (CAS RN 2439-35-2) with a purity by weight of 99 % or more1.1.-31.12.14000 tonnes0 %09.2545ex2922290063Aclonifen (ISO) (CAS RN 74070-46-5) with a purity by weight of 97 % or more1.1.-31.12.4000 tonnes0 %09.2575ex29239000873-Chloro-2-hydroxypropyl)trimethylammonium chloride (CAS RN 3327-22-8), in the form of an aqueous solution containing by weight 65 % or more but not more than 71 % 3-chloro-2-hydroxypropyl)trimethylammonium chloride1.1.-31.12.9500 tonnes0 %09.2922ex2923900088Aqueous solution containing by weight 78 % or more but not more than 82 % of [2-(acryloyloxy)ethyl]trimethylammonium chloride (CAS RN 44992-01-0)1.1.-31.12.10000 tonnes0 %09.2854ex29241900853-Iodoprop-2-yn-1-yl butylcarbamate (CAS RN 55406-53-6)1.1.-31.12.450 tonnes0 %09.2874ex2924297087Paracetamol (INN) (CAS RN 103-90-2)1.1.-31.12.20000 tonnes0 %09.2742ex2926100010Acrylonitrile (CAS RN 107-13-1), for use in the manufacture of goods of chapter 55 and heading 6815^note1.1.-31.12.30000 tonnes0 %09.2583ex2926100030Acrylonitrile (CAS RN 107-13-1), for use in the manufacture of goods of headings 2921, 2924, 3903, 3906, 3908, 3911 and 4002^note1.1.-31.12.20000 tonnes0 %09.2550ex2926907031Lambda-cyhalothrin (ISO) (CAS RN 91465-08-6) with a purity by weight of 97 % or more1.1.-31.12.2200 tonnes0 %09.2856ex29269070842-Nitro-4(trifluoromethyl)benzonitrile (CAS RN 778-94-9)1.1.-31.12.900 tonnes0 %09.2685ex2929909030Nitroguanidine (CAS RN 556-88-7)1.1.-31.12.6500 tonnes0 %09.2597ex2930909594Bis[3-(triethoxysilyl)propyl]disulphide (CAS RN 56706-10-6)1.1.-31.12.6000 tonnes0 %09.2596ex29309095962-Chloro-4-(methylsulphonyl)-3-((2,2,2-trifluoroethoxy)methyl) benzoic acid (CAS RN 120100-77-8)1.1.-31.12.300 tonnes0 %09.2580ex2931900075Hexadecyltrimethoxysilane (CAS RN 16415-12-6) with a purity by weight of at least 95 %, for use in the manufacture of polyethylene^note1.1.-31.12.165 tonnes0 %09.2842293212002-Furaldehyde (furfuraldehyde)1.1.-31.12.10000 tonnes0 %09.2024ex29321900852-Methyltetrahydrofuran (CAS RN 96-47-9) with a purity by weight of 99 % or more1.7.-31.12.750 tonnes0 %09.2696ex2932209025Decan-5-olide (CAS RN 705-86-2)1.1.-31.12.6000 kilograms0 %09.2697ex2932209030Dodecan-5-olide (CAS RN 713-95-1)1.1.-31.12.6000 kilograms0 %09.2812ex2932209077Hexan-6-olide (CAS RN 502-44-3)1.1.-31.12.4000 tonnes0 %09.285829329300Piperonal (CAS RN 120-57-0)1.1.-31.12.220 tonnes0 %09.2541ex29331990732,4-Dihydro-2,5-dimethyl-3H-pyrazol-3-one (CAS RN 2749-59-9) with a purity by weight of 99 % or more1.1.-31.12.150 tonnes0 %09.2839ex29333999092-(2-Pyridyl)ethanol (CAS RN 103-74-2) with a purity by weight of 99 % or more1.1.-31.12.700 tonnes0 %09.2543ex2933399913Imazamox (ISO) (CAS RN 114311-32-9) with a purity by weight of 95 % or more1.1.-31.12.300 tonnes0 %09.2546ex2933399946Fluopicolide (ISO) (CAS RN 239110-15-7) with a content by weight of 97 % or more1.1.-31.12.250 tonnes0 %09.2025ex2933599582Ametoctradin (ISO) (CAS RN 865318-97-4) with a purity by weight of 98 % or more1.7.-31.12.353500 kilograms0 %09.2547ex2933698013Metribuzin (ISO) (CAS RN 21087-64-9) with a purity by weight of 93 % or more1.1.-31.12.225 tonnes0 %09.2860ex29336980301,3,5-Tris[3-(dimethylamino)propyl]hexahydro-1,3,5-triazine (CAS RN 15875-13-5)1.1.-31.12.600 tonnes0 %09.2566ex29339980051,4,7,10-Tetraazacyclododecane (CAS RN 294-90-6) with a purity by weight of 96 % or more1.1.-31.12.60 tonnes0 %09.2544ex2933998023Tebuconazole (ISO) (CAS RN 107534-96-3) with a purity by weight of 95 % or more1.1.-31.12.150 tonnes0 %09.2658ex29339980735-(Acetoacetylamino)benzimidazolone (CAS RN 26576-46-5)1.1.-31.12.400 tonnes0 %09.2549ex2934999016Difenoconazole (ISO) (CAS RN 119446-68-3)1.1.-31.12.1000 tonnes0 %09.2548ex2934999024Flufenacet (ISO) (CAS RN 142459-58-3) with a purity by weight of 95 % or more1.1.-31.12.900 tonnes0 %09.2593ex29349990675-Chlorothiophene-2-carboxylic acid (CAS RN 24065-33-6)1.1.-31.12.45000 kilograms0 %09.2675ex29359090794-[[(2-Methoxybenzoyl)amino]sulfonyl]benzoyl chloride (CAS RN 816431-72-8)1.1.-31.12.1000 tonnes0 %09.2945ex2940000020D-Xylose (CAS RN 58-86-6)1.1.-31.12.400 tonnes0 %09.2686ex3204110075Colourant C.I. Disperse Yellow 54 (CAS RN 7576-65-0) and preparations based thereon with a colourant C.I. Disperse Yellow 54 content of 99 % or more by weight1.1.-31.12.250 tonnes0 %09.2676ex3204170014Preparations based on Colourant C.I. Pigment Red 48:2 (CAS RN 7023-61-2) with a content thereof of 60 % or more but less than 85 % by weight1.1.-31.12.50 tonnes0 %09.2698ex3204170030Colourant C.I. Pigment Red 4 (CAS RN 2814-77-9) and preparations based thereon with a colourant C.I. Pigment Red 4 content of 60 % or more by weight1.1.-31.12.150 tonnes0 %09.2659ex3802900019Soda flux calcinated diatomaceous earth1.1.-31.12.35000 tonnes0 %09.2908ex3804000010Sodium lignosulphonate (CAS RN 8061-51-6)1.1.-31.12.40000 tonnes0 %09.288938051090Sulphate turpentine1.1.-31.12.25000 tonnes0 %09.2935ex3806100010Rosin and resin acids obtained from fresh oleoresins1.1.-31.12.280000 tonnes0 %09.2832ex3808929040Preparation containing 38 % or more but not more than 50 % by weight of pyrithione zinc (INN) (CAS RN 13463-41-7) in an aqueous dispersion1.1.-31.12.500 tonnes0 %09.2923ex3808942040Aqueous solution containing by weight:1.1.-31.12.3000 tonnes0 %09.2876ex3811290057Additives consisting of reaction products of diphenylamine and branched nonenes with:used for the manufacture of lubricating oils^note1.1.-31.12.900 tonnes0 %09.2927ex3811290083Additives containing by weight:for use in the manufacture of blends of additives for lubricating oils^note1.1.-31.12.500 tonnes0 %09.2027ex3815199082Catalyst consisting of organo-metallic compounds of boron, titanium and aluminium, fixed on a support of silicon dioxide, in the form of powder1.7.-31.12.7800 kilograms0 %09.2814ex3815909076Catalyst consisting of titanium dioxide and tungsten trioxide1.1.-31.12.3000 tonnes0 %09.2644ex3824999277Preparation containing by weight:1.1.-31.12.10000 tonnes0 %09.2542ex3824999297Mixture containing bis[3-(triethoxysilyl)propyl]polysulfides (CAS RN 211519-85-6) with a purity by weight of 84 % or more1.1.-31.12.2000 tonnes0 %09.2907ex3824999367Mixture of phytosterols, in the form of powder, containing by weight:for use in the manufacture of stanols/sterols or stanol/sterol esters^note1.1.-31.12.2500 tonnes0 %09.2568ex3824999691Mixture, in pellet form, containing by weight:of which 75 % by weight or more pass through a sieve with an aperture of 0,60 mm, but not more than 10 % pass through a sieve with an aperture of 0,25 mm (as determined by the ASTM D1511 method)1.1.-31.12.2100 tonnes0 %09.2820ex3827900010Mixtures containing by weight:1.1.-31.12.6000 tonnes0 %09.2671ex3905999081Poly(vinyl butyral)(CAS RN 63148-65-2):1.1.-31.12.12500 tonnes0 %09.2846ex3907400025Polymer blend of polycarbonate and poly(methyl methacrylate) with a polycarbonate content of not less than 98,5 % by weight, in the form of pellets or granules, with a luminous transmittance of not less than 88,5 %, measured using a test sample with a thickness of 4 mm at a wavelength of λ = 400 nm (according to ISO 13468-2)1.1.-31.12.2000 tonnes0 %^note09.2585ex39076100ex39076900ex39079980202070Copolymer of poly(ethylene terephthalate) and cyclohexane dimethanol, containing more than 10 % by weight of cyclohexane dimethanol1.1.-31.12.60000 tonnes2 %09.2855ex3910000010Liquid poly(methylhydrosiloxane) with terminal trimethylsilyl groups (CAS RN 63148-57-2) with a purity by weight of 99,9 % or more1.1.-31.12.1000 tonnes0 %09.2931ex3911901110Poly(oxy-1,4-phenylenesulphonyl-1,4-phenyleneoxy-1,4-phenyleneisopropylidene-1,4-phenylene) (CAS RN 25135-51-7 and CAS RN 25154-01-2), in one of the forms mentioned in note 6(b) to this chapter containing by weight not more than 20 % of additives1.1.-31.12.6300 tonnes0 %09.2723ex3911901935Poly(oxy-1,4-phenylenesulfonyl-1,4-phenyleneoxy-4,4′-biphenylene) (CAS RNs 25608-64-4 and 25839-81-0) containing by weight not more than 20 % of additives1.1.-31.12.5000 tonnes0 %09.2816ex3912110020Cellulose acetate flakes1.1.-31.12.75000 tonnes0 %09.2561ex3912398560Hypromellose (INN) (CAS RN 9004-65-3), for use in the manufacturing of food supplements or pharmaceuticals^note1.1.-31.12.2750 tonnes0 %09.2573ex3913100020Sodium alginate extracted from brown seaweed (CAS RN 9005-38-3), with1.1.-31.12.2000 tonnes0 %09.2641ex3913900087Sodium hyaluronate, non sterile, with:1.1.-31.12.300 kilograms0 %09.2661ex3920510050Sheets of polymethylmethacrylate conforming to standards:1.1.-31.12.100 tonnes0 %09.2645ex3921140020Cellular block of regenerated cellulose, impregnated with water containing magnesium chloride and quaternary ammonium compounds, measuring 100 cm (± 10 cm) x 100 cm (± 10 cm) x 40 cm (± 5 cm)1.1.-31.12.1700 tonnes0 %09.2572ex52052600ex520527001010Raw white single cotton yarn1.1.-31.12.50000 tonnes0 %09.2848ex5505101010Waste of synthetic fibres (including noils, yarn waste, and garnetted stock) of nylon or other polyamides (PA6 and PA66)1.1.-31.12.10000 tonnes0 %09.2721ex5906999020Woven and laminated rubberised textile fabric with the following characteristics:used for the manufacture of the retractable roof of motor vehicles^note1.1.-31.12.375000 square meters0 %09.2628ex7019660010Glass web woven from glass fibre coated in plastic, of a weight of 120 g/m2(± 10 g/m2), of a type used in rolling insect screens with fixed frames1.1.-31.12.3000000 square meters0 %09.2652ex7410110050Refined copper foil and strips, electrolytically manufactured, with a thickness of 0,015 mm or more but not more than 0,150 mm, used for the manufacture of laminates for Printed Circuit Boards and of Printed Circuit Boards in the printed circuit board industry^note1.1.-31.12.1020 tonnes0 %09.2662ex7410210055Plates:1.1.-31.12.108000 square meters0 %09.27957601203076012040Slabs and billets of unwrought aluminium alloys1.1.-31.12.573000 tonnes4 %09.2835ex7604291030Aluminium alloy rods with a diameter of 300,1 mm or more, but not more than 533,4 mm1.1.-31.12.1000 tonnes0 %09.2736ex76071190ex76071190ex76071190ex7607119075777879Aluminium and magnesium alloy strip or foil:for use in the manufacture of slats for blinds^note1.1.-31.12.600 tonnes0 %09.272281041100Unwrought magnesium, containing at least 99,8 % by weight of magnesium1.1.-31.12.120000 tonnes0 %09.2840ex8104300020Magnesium powder:1.1.-31.12.2000 tonnes0 %09.2629ex8302490091Aluminium telescopic handle for use in the manufacture of luggage^note1.1.-31.12.1500000 pieces0 %09.2029ex8409910015Cylinder head blank for a four cylinder engine with 10 cores, made of aluminium alloy EN AC-45500, with:1.7.-31.12.100000 pieces0 %09.2031ex8411990045Turbine ring segments, guide and rotor blades as parts of a stationary gas turbine for power generation or as a mechanical drive1.7.-31.12.615000 kilograms0 %09.2720ex8413910050Pump head for two cylinder high pressure pump made of forged steel, with:of a kind used in diesel injection systems1.1.-31.12.65000 pieces0 %09.2569ex8414900080Turbocharger wheel housing of cast aluminium alloy or cast iron:for use in the automotive industry^note1.1.-31.12.4000000 pieces0 %09.2570ex8482919010Rollers with a logarithmic profile and a diameter of 25 mm or more but not more than 70 mm or balls with a diameter of 30 mm but not more than 100 mm,for use in wind turbine industry^note1.1.-31.12.600000 pieces0 %09.2562ex8482990030Brass cages with the following characteristics:of a kind used for the manufacture of ball bearings1.1.-31.12.550000 pieces0 %09.2557ex8482990060Inner or outer rings made of steel, not hardened or not grinded, outer ring with internal raceway(s), inner ring with external raceway(s), with external diameters of:for use in the manufacture of bearings^note1.1.-31.12.2000 pieces0 %09.2552ex8482990070Male and female parts of cages,used for manufacturing of deep grove ball bearings^note1.1.-31.12.1221 tonnes0 %09.2553ex8482990080Punched cages of various diameters,for the production of tapered roller bearings^note1.1.-31.12.8000000 pieces0 %09.2560ex8501310085Power transmission device for controlling the output of exhaust gas turbochargers, consisting of:1.1.-31.12.650000 pieces0 %09.2559ex85014020ex850140807070Electric AC motor, single-phase, whether or not with commutatorfor use in the manufacture of domestic appliances^note1.1.-31.12.2000000 pieces0 %09.2554ex85051110ex85051190ex85051990747474Articles in shape of flat bars, arched bars, quarter sleeves or trapezoid whether or not arched, rounded corners or oblique sides made of ferrite, or cobalt, or samarium or other rare-earth metals, or their alloy,with:intended to become permanent magnets after magnetisation1.1.-31.12.460 tonnes0 %09.2555ex8505111076Articles of an alloy of neodymium, or an alloy of samarium,with:intended to become permanent magnets after magnetisation1.1.-31.12.350 tonnes0 %09.2556ex8505111077Article of an alloy of neodymium, in the form of arched rectangles, whether or not coated or passivated with a surface treatment, with:intended to become permanent magnets after magnetization1.1.-31.12.50 tonnes0 %09.2574ex8537109173Multifunctional device (instrument cluster) with:for use in the manufacture of passenger cars powered solely by an electric motor covered by HS subheading 870380^note1.1.-31.12.66900 pieces0 %09.2558ex8543709087An electronic sound generator, creating an analog signal for a device producing the sound of an engine, containing:for use in the manufacture of goods of Chapter 87^note1.1.-31.12.30000 pieces0 %09.2910ex8708999775Aluminium alloy support bracket, with mounting holes, whether or not with fixation nuts, for indirect connection of the gearbox to the car body for use in the manufacture of goods of Chapter 87^note1.1.-31.12.200000 pieces0 %09.2668ex87149110ex87149110ex87149110213175Bicycle frame, constructed from carbon fibres and artificial resin, for use in the manufacture of bicycles (including electric bicycles)^note1.1.-31.12.600000 pieces0 %09.2564ex87149110ex87149110ex87149110253577Frame, constructed from aluminium or aluminium and carbon fibres and artificial resin, for the use in the manufacture of bicycles (including electric bicycles)^note1.1.-31.12.9600000 pieces0 %09.2579ex90292031ex902990004040Clustered instrument panel with:for use in the manufacture of goods of Chapter 87^note1.1.-31.12.160000 pieces0 %

Article 1#

Article 2#

Article 1 #

Article 2 #