Council Regulation (EU) 2024/3213

Contents

THE COUNCIL OF THE EUROPEAN UNION,Having regard to the Treaty on the Functioning of the European Union, and in particular Article 31 thereof,Having regard to the proposal from the European Commission,Whereas:

(1)In order to ensure a sufficient supply of certain agricultural and industrial products which are produced in insufficient quantities in the Union and thereby avoid any disturbances on the market for those products, autonomous tariff quotas of the Union (‘quotas’) were opened by Council Regulation (EU) 2021/2283^note. Within those quotas, products can be imported into the Union at reduced or zero duty rates.

(2)As it is in the Union’s interest to ensure an adequate supply of certain industrial products, and having regard to the fact that identical, equivalent or substitute products are not produced in sufficient quantities within the Union, it is necessary to open new quotas with order numbers 09.2540, 09.2541, 09.2542, 09.2543 at zero duty rates and 09.2795 at reduced duty rate for appropriate quantities of those products.

(3)As the scope of the quotas with order numbers 09.2652 and 09.2927 has become inadequate to fulfil the needs of economic operators in the Union, the description of the products covered by those quotas should be amended. Additionally, the indication of the applicable TARIC code for the quota with order number 09.2652 should be amended. Furthermore, it is in the Union’s interest to maintain the quota with order number 09.2652 solely for the purpose of using the products concerned in the manufacture of specific goods produced within the Union. The application of the quota with order number 09.2652 should therefore be made conditional on the specific use of the products concerned in accordance with Article 254 of Regulation (EU) No 952/2013 of the European Parliament and of the Council^note.

(4)For the quotas with order numbers 09.2596, 09.2597 and 09.2685, the classification of those products in Annex I to Council Regulation (EEC) No 2658/87 (the ‘Combined Nomenclature’)^note has changed. Therefore, the applicable Combined Nomenclature codes for those quotas should be amended.

(5)As is it in the Union’s interest to ensure an adequate supply of a certain industrial product, the volume of the quota with order number 09.2662 should be increased.

(6)As the Union production capacity for a certain industrial product has been increased, the volume of the quota with order number 09.2679 should be decreased.

(7)For the quotas with order numbers 09.2544, 09.2545, 09.2546, 09.2547, 09.2548, 09.2549, 09.2550, 09.2551, 09.2552, 09.2553, 09.2554, 09.2555, 09.2556, 09.2557, 09.2559 and 09.2560, the quota periods should be extended and the quota volumes should be adapted on a yearly basis, as the quotas were opened for a period of 6 months only and it is still in the Union’s interest to maintain those quotas.

(8)For the quota with order number 09.2808, the quota should be opened for a period of 6 months only in order to take into account the potential evolution of the production of those products in the Union.

(9)For the quotas with order numbers 09.2563 and 09.2925, the quotas should be opened for a period of 6 months only in order to ensure that their continued existence does not conflict with any other Union policy. Additionally, it is in the Union’s interest to reduce the volume of those quotas by half and to maintain those quotas solely for the purpose of using the products concerned in the manufacture of specific goods produced within the Union. The application of those quotas should therefore be made conditional on the specific use of the products concerned in accordance with Article 254 of Regulation (EU) No 952/2013.

(10)As it is no longer in the Union’s interest to maintain the quotas with order numbers 09.2664, 09.2682 and 09.2926, those quotas should be closed with effect from 1 January 2025.

(11)Taking into account the amendments to be made and for the sake of clarity, the Annex to Regulation (EU) 2021/2283 should be replaced.

(12)Regulation (EU) 2021/2283 should therefore be amended accordingly.

(13)In order to avoid any interruption in the application of the quota scheme and to comply with the guidelines set out in the communication from the Commission of 13 December 2011 concerning autonomous tariff suspensions and quotas, the changes provided for in this Regulation regarding the quotas for the products concerned should apply from 1 January 2025. This Regulation should therefore enter into force as a matter of urgency,

HAS ADOPTED THIS REGULATION:

Article 1 #

The Annex to Regulation (EU) 2021/2283 is replaced by the text set out in the Annex to this Regulation.

Article 2 #

This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union.It shall apply from 1 January 2025.

Order number	CN code	TARIC	Description	Quota period	Quota volume	Quota duty rate
09.2849	ex07108069	10	Mushrooms of the species Auricularia polytricha (uncooked or cooked by steaming or boiling), frozen, for the manufacture of prepared meals^note^note	1.1.-31.12.	700 tonnes	0 %
09.2925	ex23099031ex23099031ex23099096ex23099096	51595159	Feed additive, consisting on dry weight basis of:68 % or more, but not more than 80 % of L-lysine sulphate, andnot more than 32 % of other components such as carbohydrates and other amino acids,for use in the production of animal feed and/or for use in the production of pharmaceuticals^note	1.1.-30.6.	50000 tonnes	0 %
09.2913	ex24011035ex24011070ex24011095ex24011095ex24011095ex24012035ex24012070ex24012095ex24012095ex24012095	91101121919110112191	Natural unmanufactured tobacco, whether or not cut in regular size, having a custom value of not less than EUR 450 per 100 kg net weight, for use as binder or wrapper for the manufacture of goods falling within subheading 24021000^note	1.1.-31.12.	3000 tonnes	0 %
09.2828	27122090		Paraffin wax containing by weight less than 0,75 % of oil	1.1.-31.12.	180000 tonnes	0 %
09.2600	ex27129039	10	Slack wax (CAS RN 64742-61-6)	1.1.-31.12.	100000 tonnes	0 %
09.2578	ex28111980	50	Sulphamidic acid (CAS RN 5329-14-6) with a purity by weight of 95 % or more, whether or not with not more than 5 % addition of the anti-caking agent silicon dioxide (CAS RN 112926-00-8)	1.1.-31.12.	27000 tonnes	0 %
09.2928	ex28112200	40	Silica filler in the form of granules, with a purity by weight of 97 % or more of silicon dioxide	1.1.-31.12.	1700 tonnes	0 %
09.2806	ex28259040	30	Tungsten trioxide, including blue tungsten oxide (CAS RN 1314-35-8 or CAS RN 39318-18-8)	1.1.-31.12.	12000 tonnes	0 %
09.2819	ex28332500	30	Copper hydroxide sulfate (Cu₄(OH)₆(SO₄)), hydrate (CAS RN 12527-76-3) with a purity by weight of 98 % or more	1.1.-31.12.	240000 kilograms	0 %
09.2872	ex28332980	40	Caesium sulphate (CAS RN 10294-54-9) in solid form or as aqueous solution containing by weight 48 % or more but not more than 52 % of caesium sulphate	1.1.-31.12.	400 tonnes	0 %
09.2567	ex29032200	10	Trichloroethylene (CAS RN 79-01-6) with a purity by weight of 99 % or more	1.1.-31.12.	11885000 kilograms	0 %
09.2837	ex29037930	20	Bromochloromethane (CAS RN 74-97-5)	1.1.-31.12.	600 tonnes	0 %
09.2933	ex29039980	30	1,3-Dichlorobenzene (CAS RN 541-73-1)	1.1.-31.12.	2600 tonnes	0 %
09.2700	ex29051200	10	Propan-1-ol (propyl alcohol) (CAS RN 71-23-8)	1.1.-31.12.	15000 tonnes	0 %
09.2551	ex29052990	40	Prop-2-yn-1-ol (CAS RN 107-19-7) with a purity by weight of 99 % or more	1.1.-31.12.	150 tonnes	0 %
09.2830	ex29061900	40	Cyclopropylmethanol (CAS RN 2516-33-8)	1.1.-31.12.	20 tonnes	0 %
09.2851	ex29071200	10	O-cresol (CAS RN 95-48-7) having a purity of not less than 98,5 % by weight	1.1.-31.12.	20000 tonnes	0 %
09.2704	ex29094980	20	2,2,2’,2’-Tetrakis(hydroxymethyl)- 3,3’-oxydipropan-1-ol (CAS RN 126-58-9)	1.1.-31.12.	500 tonnes	0 %
09.2565	ex29141990	70	Calcium acetylacetonate (CAS RN 19372-44-2) with a purity by weight of 95 % or more	1.1.-31.12.	400 tonnes	0 %
09.2852	ex29142900	60	Cyclopropyl methyl ketone (CAS RN 765-43-5)	1.1.-31.12.	300 tonnes	0 %
09.2638	ex29152100	10	Acetic acid (CAS RN 64-19-7) of a purity by weight of 99 % or more	1.1.-31.12.	1000000 tonnes	0 %
09.2679	29153200		Vinyl acetate (CAS RN 108-05-4)	1.1.-31.12.	370000 tonnes	0 %
09.2728	ex29159070	85	Ethyl trifluoroacetate (CAS RN 383-63-1)	1.1.-31.12.	400 tonnes	0 %
09.2665	ex29161995	30	Potassium (E,E)-hexa- 2,4-dienoate (CAS RN 24634-61-5)	1.1.-31.12.	8250 tonnes	0 %
09.2684	ex29163990	28	2,5-Dimethylphenylacetyl chloride (CAS RN 55312-97-5)	1.1.-31.12.	700 tonnes	0 %
09.2599	ex29171100	40	Diethyl oxalate (CAS RN 95-92-1)	1.1.-31.12.	500 tonnes	0 %
09.2769	ex29171390	10	Dimethyl sebacate (CAS RN 106-79-6)	1.1.-31.12.	1000 tonnes	0 %
09.2634	ex29171980	40	Dodecanedioic acid (CAS RN 693-23-2), of a purity by weight of more than 98,5 %	1.1.-31.12.	8000 tonnes	0 %
09.2540	29173700	10	Dimethyl terephthalate (CAS RN 120-61-6) with a purity by weight of 95 % or more	1.1.-31.12.	57500 tonnes	0 %
09.2808	ex29182200	10	O-acetylsalicylic acid (CAS RN 50-78-2)	1.1.-30.6.	120 tonnes	0 %
09.2646	ex29182900	75	Octadecyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl) propionate (CAS RN 2082-79-3) with:a sieve passing fraction at a mesh width of 500 μm of more than 99 % by weight, anda melting point of 49 C or more, but not more than 54 C,for use in the manufacture of PVC processing stabilizer-one packs based on powder mixtures (powders or press granulates)^note	1.1.-31.12.	380 tonnes	0 %
09.2647	ex29182900	80	Pentaerythritol tetrakis(3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate) (CAS RN 6683-19-8) with:a sieve passing fraction at a mesh width of 250 μm of more than 75 % by weight and at a mesh width of 500 μm of more than 99 % by weight, anda melting point of 110 C or more, but not more than 125 C,for use in the manufacture of PVC processing stabilizer-one packs based on powder mixtures (powders or press granulates)^note	1.1.-31.12.	140 tonnes	0 %
09.2975	ex29183000	10	Benzophenone- 3,3’,4,4’-tetracarboxylic dianhydride (CAS RN 2421-28-5)	1.1.-31.12.	1000 tonnes	0 %
09.2598	ex29211999	75	Octadecylamine (CAS RN 124-30-1)	1.1.-31.12.	400 tonnes	0 %
09.2649	ex29212900	60	Bis(2-dimethylaminoethyl)(methyl)amine (CAS RN 3030-47-5)	1.1.-31.12.	1700 tonnes	0 %
09.2617	ex29214200	89	4-Fluoro-N-(1-methylethyl)benzeneamine (CAS RN 70441-63-3)	1.1.-31.12.	500 tonnes	0 %
09.2602	ex29215119	10	O-phenylenediamine (CAS RN 95-54-5)	1.1.-31.12.	1800 tonnes	0 %
09.2921	ex29221900	22	2-(dimethylamino)ethyl acrylate (CAS RN 2439-35-2) with a purity by weight of 99 % or more	1.1.-31.12.	14000 tonnes	0 %
09.2545	ex29222900	63	Aclonifen (ISO) (CAS RN 74070-46-5) with a purity by weight of 97 % or more	1.1.-31.12.	4000 tonnes	0 %
09.2563	ex29224100	30	L-Lysine hydrochloride (CAS RN 657-27-2) or an aqueous solution of L-lysine (CAS RN 56-87-1), containing by weight 50 % or more of L-lysine, for use in the production of animal feed and/or for use in the production of pharmaceuticals^note	1.1.-30.6.	150000 tonnes	0 %
09.2575	ex29239000	87	3-Chloro-2-hydroxypropyl)trimethylammonium chloride (CAS RN 3327-22-8), in the form of an aqueous solution containing by weight 65 % or more but not more than 71 % 3-chloro-2-hydroxypropyl)trimethylammonium chloride	1.1.-31.12.	9500 tonnes	0 %
09.2922	ex29239000	88	Aqueous solution containing by weight 78 % or more but not more than 82 % of [2-(acryloyloxy)ethyl]trimethylammonium chloride (CAS RN 44992-01-0)	1.1.-31.12.	10000 tonnes	0 %
09.2854	ex29241900	85	3-Iodoprop-2-yn-1-yl butylcarbamate (CAS RN 55406-53-6)	1.1.-31.12.	450 tonnes	0 %
09.2874	ex29242970	87	Paracetamol (INN) (CAS RN 103-90-2)	1.1.-31.12.	20000 tonnes	0 %
09.2742	ex29261000	10	Acrylonitrile (CAS RN 107-13-1), for use in the manufacture of goods of chapter 55 and heading 6815^note	1.1.-31.12.	30000 tonnes	0 %
09.2583	ex29261000	30	Acrylonitrile (CAS RN 107-13-1), for use in the manufacture of goods of headings 2921, 2924, 3903, 3906, 3908, 3911 and 4002^note	1.1.-31.12.	20000 tonnes	0 %
09.2550	ex29269070	31	Lambda-cyhalothrin (ISO) (CAS RN 91465-08-6) with a purity by weight of 97 % or more	1.1.-31.12.	2200 tonnes	0 %
09.2856	ex29269070	84	2-Nitro-4(trifluoromethyl)benzonitrile (CAS RN 778-94-9)	1.1.-31.12.	900 tonnes	0 %
09.2685	ex29299090	30	Nitroguanidine (CAS RN 556-88-7)	1.1.-31.12.	6500 tonnes	0 %
09.2597	ex29309095	94	Bis[3-(triethoxysilyl)propyl]disulphide (CAS RN 56706-10-6)	1.1.-31.12.	6000 tonnes	0 %
09.2596	ex29309095	96	2-Chloro-4-(methylsulphonyl)-3-((2,2,2-trifluoroethoxy)methyl) benzoic acid (CAS RN 120100-77-8)	1.1.-31.12.	300 tonnes	0 %
09.2580	ex29319000	75	Hexadecyltrimethoxysilane (CAS RN 16415-12-6) with a purity by weight of at least 95 %, for use in the manufacture of polyethylene^note	1.1.-31.12.	165 tonnes	0 %
09.2842	29321200		2-Furaldehyde (furfuraldehyde)	1.1.-31.12.	10000 tonnes	0 %
09.2696	ex29322090	25	Decan-5-olide (CAS RN 705-86-2)	1.1.-31.12.	6000 kilograms	0 %
09.2697	ex29322090	30	Dodecan-5-olide (CAS RN 713-95-1)	1.1.-31.12.	6000 kilograms	0 %
09.2812	ex29322090	77	Hexan-6-olide (CAS RN 502-44-3)	1.1.-31.12.	4000 tonnes	0 %
09.2858	29329300		Piperonal (CAS RN 120-57-0)	1.1.-31.12.	220 tonnes	0 %
09.2541	29331990	73	2,4-Dihydro- 2,5-dimethyl-3H-pyrazol-3-one (CAS RN 2749-59-9) with a purity by weight of 99 % or more	1.1.-31.12.	150 tonnes	0 %
09.2543	29333999	13	Imazamox (ISO) (CAS RN 114311-32-9) with a purity by weight of 95 % or more	1.1.-31.12.	300 tonnes	0 %
09.2839	ex29333999	09	2-(2-Pyridyl)ethanol (CAS RN 103-74-2) with a purity by weight of 99 % or more	1.1.-31.12.	700 tonnes	0 %
09.2546	ex29333999	46	Fluopicolide (ISO) (CAS RN 239110-15-7) with a content by weight of 97 % or more	1.1.-31.12.	250 tonnes	0 %
09.2547	ex29336980	13	Metribuzin (ISO) (CAS RN 21087-64-9) with a purity by weight of 93 % or more	1.1.-31.12.	225 tonnes	0 %
09.2860	ex29336980	30	1,3,5-Tris[3-(dimethylamino)propyl]hexahydro- 1,3,5-triazine (CAS RN 15875-13-5)	1.1.-31.12.	600 tonnes	0 %
09.2566	ex29339980	05	1,4,7,10-Tetraazacyclododecane (CAS RN 294-90-6) with a purity by weight of 96 % or more	1.1.-31.12.	60 tonnes	0 %
09.2544	ex29339980	23	Tebuconazole (ISO) (CAS RN 107534-96-3) with a purity by weight of 95 % or more	1.1.-31.12.	150 tonnes	0 %
09.2658	ex29339980	73	5-(Acetoacetylamino)benzimidazolone (CAS RN 26576-46-5)	1.1.-31.12.	400 tonnes	0 %
09.2549	ex29349990	16	Difenoconazole (ISO) (CAS RN 119446-68-3)	1.1.-31.12.	1000 tonnes	0 %
09.2548	ex29349990	24	Flufenacet (ISO) (CAS RN 142459-58-3) with a purity by weight of 95 % or more	1.1.-31.12.	900 tonnes	0 %
09.2593	ex29349990	67	5-Chlorothiophene-2-carboxylic acid (CAS RN 24065-33-6)	1.1.-31.12.	45000 kilograms	0 %
09.2675	ex29359090	79	4-[[(2-Methoxybenzoyl)amino]sulfonyl]benzoyl chloride (CAS RN 816431-72-8)	1.1.-31.12.	1000 tonnes	0 %
09.2945	ex29400000	20	D-Xylose (CAS RN 58-86-6)	1.1.-31.12.	400 tonnes	0 %
09.2686	ex32041100	75	Colourant C.I. Disperse Yellow 54 (CAS RN 7576-65-0) and preparations based thereon with a colourant C.I. Disperse Yellow 54 content of 99 % or more by weight	1.1.-31.12.	250 tonnes	0 %
09.2676	ex32041700	14	Preparations based on Colourant C.I. Pigment Red 48:2 (CAS RN 7023-61-2) with a content thereof of 60 % or more but less than 85 % by weight	1.1.-31.12.	50 tonnes	0 %
09.2698	ex32041700	30	Colourant C.I. Pigment Red 4 (CAS RN 2814-77-9) and preparations based thereon with a colourant C.I. Pigment Red 4 content of 60 % or more by weight	1.1.-31.12.	150 tonnes	0 %
09.2659	ex38029000	19	Soda flux calcinated diatomaceous earth	1.1.-31.12.	35000 tonnes	0 %
09.2908	ex38040000	10	Sodium lignosulphonate (CAS RN 8061-51-6)	1.1.-31.12.	40000 tonnes	0 %
09.2889	38051090		Sulphate turpentine	1.1.-31.12.	25000 tonnes	0 %
09.2935	ex38061000	10	Rosin and resin acids obtained from fresh oleoresins	1.1.-31.12.	280000 tonnes	0 %
09.2832	ex38089290	40	Preparation containing 38 % or more but not more than 50 % by weight of pyrithione zinc (INN) (CAS RN 13463-41-7) in an aqueous dispersion	1.1.-31.12.	500 tonnes	0 %
09.2923	ex38089420	40	Aqueous solution containing by weight:10,0 % or more but not more than 11,3 % of 5-chloro-2-methyl-2H-isothiazol-3-one,3,0 % or more but not more than 4,1 % of 2-methyl-2H-isothiazol-3-one,a combined concentration of isothiazolones (CAS RN 55965-84-9) of 13,0 % or more but not more than 15,4 %,18 % or more but not more than 22 % of nitrates, calculated as sodium nitrate, and5 % or more but not more than 8 % of chlorides, calculated as sodium chloride	1.1.-31.12.	3000 tonnes	0 %
09.2876	ex38112900	57	Additives consisting of reaction products of diphenylamine and branched nonenes with:more than 20 % but not more than 50 % by weight 4-monononyldiphenylamine, andmore than 50 % but not more than 80 % by weight 4,4’-dinonyldiphenylamine,a total percentage of 2,4-dinonyldiphenylamine and 2,4’-dinonyldiphenylamine of not more than 15 % by weight,used for the manufacture of lubricating oils^note	1.1.-31.12.	900 tonnes	0 %
09.2927	ex38112900	83	Additives containing by weight:70 % or more of 2,5-bis(tert-nonyldithio)-[1,3,4]-thiadiazole (CAS RN 89347-09-1), and10 % or more of 5-(tert-nonyldithio)- 1,3,4-thiadiazole-2(3H)-thione (CAS RN 97503-12-3),for use in the manufacture of blends of additives for lubricating oils^note	1.1.-31.12.	500 tonnes	0 %
09.2814	ex38159090	76	Catalyst consisting of titanium dioxide and tungsten trioxide	1.1.-31.12.	3000 tonnes	0 %
09.2542	38249992	97	Mixture containing bis[3-(triethoxysilyl)propyl]polysulfides (CAS RN 211519-85-6) with a purity by weight of 84 % or more	1.1.-31.12.	2000 tonnes	0 %
09.2644	ex38249992	77	Preparation containing by weight:55 % or more but not more than 78 % of dimethyl gluterate (CAS RN 1119-40-0),10 % or more but not more than 30 % of dimethyl adipate (CAS RN 627-93-0), andnot more than 35 % of dimethyl succinate (CAS RN 106-65-0)	1.1.-31.12.	10000 tonnes	0 %
09.2907	ex38249993	67	Mixture of phytosterols, in the form of powder, containing by weight:75 % or more of sterols,not more than 25 % of stanols,for use in the manufacture of stanols/sterols or stanol/sterol esters^note	1.1.-31.12.	2500 tonnes	0 %
09.2568	ex38249996	91	Mixture, in pellet form, containing by weight:49 % or more but not more than 50 % of bis[3-(triethoxysilyl)propyl] polysulphides (CAS RN 211519-85-6), and50 % or more but not more than 51 % of carbon black (CAS RN 1333-86-4),of which 75 % by weight or more pass through a sieve with an aperture of 0,60 mm, but not more than 10 % pass through a sieve with an aperture of 0,25 mm (as determined by the ASTM D1511 method)	1.1.-31.12.	2100 tonnes	0 %
09.2820	ex38279000	10	Mixtures containing by weight:60 % or more but not more than 90 % of 2-chloropropene (CAS RN 557-98-2),8 % or more but not more than 14 % of (Z)-1-chloropropene (CAS RN 16136-84-8),5 % or more but not more than 23 % of 2-chloropropane (CAS RN 75-29-6),not more than 6 % of 3-chloropropene (CAS RN 107-05-1), andnot more than 1 % of ethyl chloride (CAS RN 75-00-3)	1.1.-31.12.	6000 tonnes	0 %
09.2671	ex39059990	81	Poly(vinyl butyral)(CAS RN 63148-65-2):containing by weight 17,5 % or more, but not more than 20 % of hydroxyl groups, andwith a median particle size (D50) of more than 0,6 mm	1.1.-31.12.	12500 tonnes	0 %
09.2846	ex39074000	25	Polymer blend of polycarbonate and poly(methyl methacrylate) with a polycarbonate content of not less than 98,5 % by weight, in the form of pellets or granules, with a luminous transmittance of not less than 88,5 %, measured using a test sample with a thickness of 4 mm at a wavelength of λ = 400 nm (according to ISO 13468-2)	1.1.-31.12.	2000 tonnes	0 %
09.2585	ex39079980	70	Copolymer of poly(ethylene terephthalate) and cyclohexane dimethanol, containing more than 10 % by weight of cyclohexane dimethanol	1.1.-31.12.	60000 tonnes	2 %
09.2855	ex39100000	10	Liquid poly(methylhydrosiloxane) with terminal trimethylsilyl groups (CAS RN 63148-57-2) with a purity by weight of 99,9 % or more	1.1.-31.12.	1000 tonnes	0 %
09.2931	ex39119011	10	Poly(oxy- 1,4-phenylenesulphonyl- 1,4-phenyleneoxy- 1,4-phenyleneisopropylidene- 1,4-phenylene) (CAS RN 25135-51-7 and CAS RN 25154-01-2), in one of the forms mentioned in note 6(b) to this chapter containing by weight not more than 20 % of additives	1.1.-31.12.	6300 tonnes	0 %
09.2723	ex39119019	35	Poly(oxy- 1,4-phenylenesulfonyl- 1,4-phenyleneoxy- 4,4’-biphenylene) (CAS RNs 25608-64-4 and 25839-81-0) containing by weight not more than 20 % of additives	1.1.-31.12.	5000 tonnes	0 %
09.2816	ex39121100	20	Cellulose acetate flakes	1.1.-31.12.	75000 tonnes	0 %
09.2561	ex39123985	60	Hypromellose (INN) (CAS RN 9004-65-3), for use in the manufacturing of food supplements or pharmaceuticals^note	1.1.-31.12.	2750 tonnes	0 %
09.2573	ex39131000	20	Sodium alginate extracted from brown seaweed (CAS RN 9005-38-3), witha loss on drying of not more than 15 % by weight (4h at 105 C),a water-insoluble fraction of not more than 2 % by weight, calculated on the dry weight	1.1.-31.12.	2000 tonnes	0 %
09.2641	ex39139000	87	Sodium hyaluronate, non sterile, with:a weight average molecular weight (Mw) of not more than 900000,an endotoxin level of not more than 0,008 Endotoxin units (EU)/mg,an ethanol content of not more than 1 % by weight,an isopropanol content of not more than 0,5 % by weight	1.1.-31.12.	300 kilograms	0 %
09.2661	ex39205100	50	Sheets of polymethylmethacrylate conforming to standards:EN 4364 (MIL-P-5425E) and DTD5592A, orEN 4365 (MIL-P-8184) and DTD5592A	1.1.-31.12.	100 tonnes	0 %
09.2645	ex39211400	20	Cellular block of regenerated cellulose, impregnated with water containing magnesium chloride and quaternary ammonium compounds, measuring 100 cm (± 10 cm) x 100 cm (± 10 cm) x 40 cm (± 5 cm)	1.1.-31.12.	1700 tonnes	0 %
09.2572	ex52052600ex52052700	1010	Raw white single cotton yarnof combed fibres,with an average fibre length of 36,5 mm or more,produced through the compact ring spinning process with pneumatic compression,with a tear strength of 26,5 cN/tex or more (according to ISO 2062:2009, at a speed of 5000 mm/min)	1.1.-31.12.	50000 tonnes	0 %
09.2848	ex55051010	10	Waste of synthetic fibres (including noils, yarn waste, and garnetted stock) of nylon or other polyamides (PA6 and PA66)	1.1.-31.12.	10000 tonnes	0 %
09.2721	ex59069990	20	Woven and laminated rubberised textile fabric with the following characteristics:with three layers,one outer layer consists of acrylic fabric,the other outer layer consists of polyester fabric,the middle layer consists of chlorobutyl rubber,the middle layer has a weight of 452 g/m2 or more but not more than 569 g/m2,the textile fabric has a total weight of 952 g/m2 or more but not more than 1159 g/m2, andthe textile fabric has a total thickness of 0,8 mm or more but not more than 4 mm,used for the manufacture of the retractable roof of motor vehicles^note	1.1.-31.12.	375000 square meters	0 %
09.2628	ex70196600	10	Glass web woven from glass fibre coated in plastic, of a weight of 120 g/m²(± 10 g/m²), of a type used in rolling insect screens with fixed frames	1.1.-31.12.	3000000 square meters	0 %
09.2652	ex74101100	50	Refined copper foil and strips, electrolytically manufactured, with a thickness of 0,015 mm or more but not more than 0,150 mm, used for the manufacture of laminates for Printed Circuit Boards and of Printed Circuit Boards in the printed circuit board industry^note	1.1.-31.12.	1020 tonnes	0 %
09.2662	ex74102100	55	Plates:consisting of at least one layer of fibreglass fabric impregnated with epoxide resin,covered on one or both sides with copper foil with a thickness of not more than 0,15 mm,with a dielectric constant (DK) of less than 5,4 at 1 MHz, as measured according to IPC-TM-650 2.5.5.2,with a loss tangent of less than 0,035 at 1 MHz, as measured according to IPC-TM-650 2.5.5.2,with a comparative tracking index (CTI) of 600 or more	1.1.-31.12.	108000 square meters	0 %
09.2795	7601203076012040		Slabs and billets of unwrought aluminium alloys	1.1.-31.12.	573000 tonnes	4 %
09.2835	ex76042910	30	Aluminium alloy rods with a diameter of 300,1 mm or more, but not more than 533,4 mm	1.1.-31.12.	1000 tonnes	0 %
09.2736	ex76071190ex76071190ex76071190ex76071190	75777879	Aluminium and magnesium alloy strip or foil:of an alloy conforming to standards 5182-H19 or 5052-H19,in rolls with an outside diameter of minimum 1250 mm but not more than 1350 mm,of a thickness (tolerance -0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm,of a width (tolerance ±0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm,having a camber tolerance of not more than 0,4 mm/750 mm,of a flatness measurement: I-unit ±4,having a tensile strength of more than (5182-H19) 365 MPa or (5052-H19) 320 MPa, andof an elongation A50 of more than (5182-H19) 3 % or (5052-H19) 2,5 %,for use in the manufacture of slats for blinds^note	1.1.-31.12.	600 tonnes	0 %
09.2722	81041100		Unwrought magnesium, containing at least 99,8 % by weight of magnesium	1.1.-31.12.	120000 tonnes	0 %
09.2840	ex81043000	20	Magnesium powder:of purity by weight of 98 % or more, but not more than 99,5 %, andwith a particle size of 0,2 mm or more but not more than 0,8 mm	1.1.-31.12.	2000 tonnes	0 %
09.2629	ex83024900	91	Aluminium telescopic handle for use in the manufacture of luggage^note	1.1.-31.12.	1500000 pieces	0 %
09.2720	ex84139100	50	Pump head for two cylinder high pressure pump made of forged steel, with:milled threaded fittings with a diameter of 10 mm or more but not more than 36,8 mm, anddrilled fuel channels with a diameter of 3,5 mm or more but not more than 10 mm,of a kind used in diesel injection systems	1.1.-31.12.	65000 pieces	0 %
09.2569	ex84149000	80	Turbocharger wheel housing of cast aluminium alloy or cast iron:with a heat resistance up to 400 oC,with a hole of 30 mm or more but not more than 300 mm for the insertion of the compressor wheel,for use in the automotive industry^note	1.1.-31.12.	4000000 pieces	0 %
09.2570	ex84829190	10	Rollers with a logarithmic profile and a diameter of 25 mm or more but not more than 70 mm or balls with a diameter of 30 mm but not more than 100 mm,made of 100Cr6 steel or 100CrMnSi6-4 steel (ISO 3290),with a deviation of 0,5 mm or less as determined with the FBHmethodfor use in wind turbine industry^note	1.1.-31.12.	600000 pieces	0 %
09.2562	ex84829900	30	Brass cages with the following characteristics:continuously or centrifugally cast,turned,containing by weight 35 % or more, but not more than 38 % of zinc,containing by weight 0,75 % or more, but not more than 1,25 % of lead,containing by weight 1,0 % or more, but not more than 1,4 % of aluminium, andwith a tensile strength of 415 Pa or more,of a kind used for the manufacture of ball bearings	1.1.-31.12.	550000 pieces	0 %
09.2557	ex84829900	60	Inner or outer rings made of steel, not hardened or not grinded, outer ring with internal raceway(s), inner ring with external raceway(s), with external diameters of:14 mm or more but not more than 77 mm for the inner ring,26 mm or more but not more than 101 mm for the outer ring,for use in the manufacture of bearings^note	1.1.-31.12.	2000 pieces	0 %
09.2552	ex84829900	70	Male and female parts of cages,made of flat-rolled steel,with a diameter of 14,5 mm or more but not more than 420 mm,the male part including rivets,the female part including holes,used for manufacturing of deep grove ball bearings^note	1.1.-31.12.	1221 tonnes	0 %
09.2553	ex84829900	80	Punched cages of various diameters,made of flat rolled steel,with tensile strength of 270 MPa or more,for the production of tapered roller bearings^note	1.1.-31.12.	8000000 pieces	0 %
09.2560	ex85013100	85	Power transmission device for controlling the output of exhaust gas turbochargers, consisting of:a DC motor of an output not exceeding 600 W,for usage with a supply voltage of 8 V or more but no more than 48 V,with motor connection (plug-in connection),whether or not with position sensor,whether or not with integrated control and power electronics,whether or not with spring mechanism for resetting the lever,built in a housing with reduction gear and lever attached to the motor drive shaft, orbuilt in a housing with threads integrated into the rotor of the motor for linear movement of the integrated control rod	1.1.-31.12.	650000 pieces	0 %
09.2559	ex85014020ex85014080	7070	Electric AC motor, single-phase, whether or not with commutatorwith a nominal output of 180 W or more,with an input power of 150 W or more but not more than 2700 W,with an external diameter of more than 44,8 but not more than 135,2 mm,with a rated speed of more than 10000 rpm but not more than 50000 rpm,whether or not equipped with air-inducting ventilator,whether or not with mechanical device (pinion, screws, gear connection etc.) on the shaft,for use in the manufacture of domestic appliances^note	1.1.-31.12.	2000000 pieces	0 %
09.2554	ex85051110ex85051190ex85051990	747474	Articles in shape of flat bars, arched bars, quarter sleeves or trapezoid whether or not arched, rounded corners or oblique sides made of ferrite, or cobalt, or samarium or other rare-earth metals, or their alloy,whether or not overmolded with polymers,whether or not coated or passivated with a surface treatment,with:a length of 5 mm or more, but not more than 60 mm,a width of 5 mm or more, but not more than 40 mm,a thickness of 3 mm or more, but not more than 15 mm,intended to become permanent magnets after magnetisation	1.1.-31.12.	460 tonnes	0 %
09.2555	ex85051110	76	Articles of an alloy of neodymium, or an alloy of samarium,whether or not coated or passivated with a surface treatment,whether or not covered with zinc,in the shape of rectangles,with:a length of 13,8 mm or more but not more than 45,2 mm,a width of 7,8 mm or more but not more than 25,2 mm,a height of 1,3 mm or more but not more than 4,7 mm,intended to become permanent magnets after magnetisation	1.1.-31.12.	350 tonnes	0 %
09.2556	ex85051110	77	Article of an alloy of neodymium, in the form of arched rectangles, whether or not coated or passivated with a surface treatment, with:a width of 9,1 mm or more but not more than 10,5 mm,a length of 20 mm or more but not more than 30,1 mm,intended to become permanent magnets after magnetization	1.1.-31.12.	50 tonnes	0 %
09.2574	ex85371091	73	Multifunctional device (instrument cluster) with:curved TFT LCD display (radius 750 mm) with touch-sensitive surfaces,microprocessors and memory chips,acoustic module and loudspeaker,connections for CAN, 3 x LIN bus, LVDS and Ethernet,for operating various functions (e.g. chassis, lighting) andfor situation-related display of vehicle and navigation data (e.g. speed, odometer, charge level of the drive battery),for use in the manufacture of passenger cars powered solely by an electric motor covered by HS subheading 870380^note	1.1.-31.12.	66900 pieces	0 %
09.2558	ex85437090	87	An electronic sound generator, creating an analog signal for a device producing the sound of an engine, containing:a printed circuit board with a microprocessor and a sound amplifier,a connector,a plastic housing,with or without a metal holder,for use in the manufacture of goods of Chapter 87^note	1.1.-31.12.	30000 pieces	0 %
09.2910	ex87089997	75	Aluminium alloy support bracket, with mounting holes, whether or not with fixation nuts, for indirect connection of the gearbox to the car body for use in the manufacture of goods of Chapter 87^note	1.1.-31.12.	200000 pieces	0 %
09.2668	ex87149110ex87149110ex87149110	213175	Bicycle frame, constructed from carbon fibres and artificial resin, for use in the manufacture of bicycles (including electric bicycles)^note	1.1.-31.12.	600000 pieces	0 %
09.2564	ex87149110ex87149110ex87149110	253577	Frame, constructed from aluminium or aluminium and carbon fibres and artificial resin, for the use in the manufacture of bicycles (including electric bicycles)^note	1.1.-31.12.	9600000 pieces	0 %
09.2579	ex90292031ex90299000	4040	Clustered instrument panel with:stepping motors,analog pointers and dials,or without microprocessor control board,or without LED indicators or LCD display,showing at least:speed,engine revolutions,engine temperature,the fuel level,communicating via CAN-BUS and/or K-LINE protocols,for use in the manufacture of goods of Chapter 87^note	1.1.-31.12.	160000 pieces	0 %

Article 1#

Article 2#

Article 1 #

Article 2 #