Council Regulation (EU) 2024/1851

Contents

THE COUNCIL OF THE EUROPEAN UNION,Having regard to the Treaty on the Functioning of the European Union, and in particular Article 31 thereof,Having regard to the proposal from the European Commission,Whereas:

(1)In order to ensure a sufficient supply of certain agricultural and industrial products which are not produced in the Union and thereby avoid any disturbances on the market for those products, Common Customs Tariff duties of the type referred to in Article 56(2), point (c), of Regulation (EU) No 952/2013 of the European Parliament and of the Council^note (‘CCT duties’) on those products have been suspended by Council Regulation (EU) 2021/2278^note. As a result, the products listed in the Annex to Regulation (EU) 2021/2278 can be imported into the Union at reduced or zero duty rates without any limitation as regards their quantity.

(2)The Union production of certain products that are not listed in the Annex to Regulation (EU) 2021/2278 is inadequate to meet the specific requirements of the user industries in the Union. As it is in the Union's interest to ensure an adequate supply of certain products, and having regard to the fact that identical, equivalent or substitute products are not produced in sufficient quantities within the Union, it is necessary to grant a complete suspension of the CCT duties also on those products.

(3)With a view to promoting integrated battery production in the Union, a partial suspension of the CCT duties should be granted in respect of certain products related to battery production that are currently not listed in the Annex to Regulation (EU) 2021/2278, and the respective Union production of which is inadequate to meet the specific requirements of the user industries in the Union. The date for the mandatory review of those suspensions should be 31 December 2024, in order for that review to take into account the short-term evolution of the battery production sector in the Union.

(4)It is necessary to amend the product description, classification, supplementary unit, or end-use requirement for certain CCT duty suspensions listed in the Annex to Regulation (EU) 2021/2278 in order to take into account technical product developments and economic trends in the market.

(5)It is no longer in the interest of the Union to maintain the suspension of CCT duties for certain products listed in the Annex to Regulation (EU) 2021/2278. The suspensions for those products should therefore be deleted with effect from 1 July 2024.

(6)Regulation (EU) 2021/2278 should therefore be amended accordingly.

(7)In order to avoid any interruption in the application of the autonomous tariff suspension scheme and to comply with the guidelines set out in the communication from the Commission of 13 December 2011 concerning autonomous tariff suspensions and quotas, the changes provided for in this Regulation regarding the tariff suspensions for the products concerned should apply from 1 July 2024. This Regulation should therefore enter into force as a matter of urgency,

HAS ADOPTED THIS REGULATION:

Article 1 #

The Annex to Regulation (EU) 2021/2278 is amended in accordance with the Annex to this Regulation.

Article 2 #

This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union.It shall apply from 1 July 2024.

(1)the entries with the following serial numbers are deleted: 0.2543, 0.2930, 0.2932, 0.2990, 0.3534, 0.3559, 0.3564, 0.3577, 0.3580, 0.3611, 0.3618, 0.4644, 0.4645, 0.4757, 0.5263, 0.5818, 0.5920, 0.6109, 0.6241, 0.6242, 0.6244, 0.6259, 0.6263, 0.6347, 0.6370, 0.6476, 0.6563, 0.6564, 0.6634, 0.6769, 0.6774, 0.6857, 0.6874, 0.6893, 0.6934, 0.7121, 0.7259, 0.7456, 0.7598, 0.7649, 0.7704, 0.7788, 0.7975, 0.7994, 0.8176, 0.8178, 0.8462;

(2)the following entries replace those entries that have the same serial numbers:^noteSerial NumberCN codeTARICDescriptionRate of autonomous dutySupplementary UnitDate envisaged for mandatory review‘0.4080ex1517909910Vegetable and/or microbial oil, refined, containing by weight;

—25 % or more but not more than 70 % arachidonic acid, or

—electronic brake assistants,

—an external diameter of 80 mm or more, but not more than 200 mm,

—an external diameter of 24,2 mm or more, but not more than 140 mm,

—an external diameter of 27 mm or more but not more than 90 mm, including mounting flange,

—whether or not with a cap assembly,

—whether or not arched,

—a length of 9 mm or more, but not more than 105 mm,

—a length of 15 mm or more but not more than 52 mm,

—with a notch,

—with an external diameter of not more than 45 mm,

—standardized with high oleic sunflower oil (HOSO),

—a rectangular or a trapezoidal cross-section,

—a length of not more than 75 mm,

—a diameter of not more than 90 mm,

—a length of 16,8 mm or more, but not more than 110,2 mm,

—a diameter of not more than 120 mm,

—a length of 26,85 mm or more but not more than 32,15 mm,

—whether or not coated or passivated with a surface treatment,

—a length of 9 mm or more but not more than 101 mm,

—6 modules with 90 cells or more but not more than 192 cells,

—92 % or more, but less than 98,5 % of aluminium oxide,

—a length of not more than 1723 mm,

—a length of 50 mm or more, but not more than 120 mm,

—a length of 298 mm or more, but not more than 500 mm,

—a length of 570 mm or more, but not more than 610 mm,

—whether or not including parts made of aluminum and aluminum alloy,

—length not greater than 450 mm,

—an overall maximum length of 15,5 mm or more but not more than 29,4 mm, and

—25 % or more but not more than 40 % of calcium C16-24 alkylbenzenesulphonates (CAS RN 70024-69-0),

—overbased magnesium (C20-C24) alkylbenzenesulphonates (CAS RN 231297-75-9) and

—having thickness of both sides of 7 nm or more but not more than 80 nm, or thickness of both sides of 7 μm or more but not more than 80 μm, whether coated with an acrylic-based organic material or not,

—a total thickness of 0,25 mm or more but not more than 0,40 mm,

—with a thickness of 2,20 mm or more but not more than 2,80 mm,

—12 % or more but not more than 65 % docosahexaenoic acid, and

—hydraulic unit driven by brushless electric motor,

—a supply voltage of 4V or more, but not more than 16 V,

—a rated speed of 3300 rpm or more, but not more than 26200 rpm,

—a rated speed of not more than 25000 rpm,

—whether or not with a sun gear,

—whether or not with rounded corners or oblique sides,

—a width of 5 mm or more, but not more than 105 mm,

—a width of 5 mm or more but not more than 42 mm,

—with an internal threaded bore on one side,

—with a height of not more than 45 mm,

—containing by weight 0,005 % or more, but not more than 0,1 % of antioxidants

—a length of not more than 140 mm,

—a width of not more than 40 mm,

—whether or not a hole in the centre

—whether or not a hole in the centre,

—a width of 14,8 mm or more, but not more than 75,2 mm,

—a hole in the centre,

—a width of 7,6 mm or more but not more than 9,55 mm,

—whether or not with rounded corners,

—a width of 9 mm or more but not more than 101 mm,

—a nominal voltage of 280 V or more but not more than 400 V,

—2 % (±1,5 %) of magnesium oxide,

—a width of not more than 1162,23 mm,

—a width of 35 mm or more, but not more than 80 mm,

—a width of 33,5 mm or more, but not more than 209 mm,

—a width of 210 mm or more, but not more than 240 mm,

—with or without sealing elements or other elements made of polymer material,

—width not greater than 200 mm, and

—a pin length of 6,4 mm or more but not more than 12,6 mm

—30 % or more but not more than 65 % of mineral oils,

—by weight more than 25 % but not more than 50 % of mineral oils,

—with a surface tension of 36 Dyne/cm or more but not more than 39 Dyne/cm, or transparent 3 or 4 layers, second layer of PET, and other layers contain fluorine resin,

—a total weight of 109 g/m² or more but not more than 114 g/m²

—with a density of 0,95 g/cm³ or more,

—1 % (±0,6 %) of yttrium oxide, and

—whether or not colour marked

—a thickness of 2 mm or more, but not more than 55 mm

—whether or not coated or passivated with a surface treatment,

—with a length of 97,5 mm or more, but not more than 225 mm,

—whether or not coated or passivated with a surface treatment,

—a width of not more than 90 mm and

—a thickness of not more than 7 mm and

—layers of copper, nickel and/or zinc,

—a thickness of 4,8 mm or more, but not more than 13,2 mm,

—a thickness of 5,3 mm or more but not more than 5,8 mm, and

—having a total base number of more than 350, but not more than 450,

—a thickness of 1,85 mm or more but not more than 15,15 mm,

—a nominal capacity of 9,7 Ah or more but not more than 120 Ah,

—a height of not more than 395 mm,

—a height of 15 mm or more, but not more than 45 mm,

—a height of 75 mm or more, but not more than 228 mm,

—a height of 100 mm or more, but not more than 120 mm,

—with or without a “current interrupt device” and an “evacuation valve”

—hight not greater than 150 mm,

—with a light transmittance of more than 70 %,

—lacquered or coated with melamine foil on both sides, and

—brake fluid reservoir,

—an output at 20 ^oC of 200 W or more, but not more than 750 W,

—a rated supply voltage of 3,6 V or more, but not more than 230 V,

—an output of 45 W or more but not more than 400 W, and

—whether or not with a speed and rotational direction encoder,

—either 3 % (±2,2 %) of lanthanum oxide or

—a thickness of not more than 55 mm,

—a radius of curvature of more than 86 mm but not more than 241 mm,

—a weight of 6,1 g or more but not more than 8,3 g,

—a charging voltage of 110 V or more but not more than 495 V, and

—a weight of 0,040 kg or more but not more than 0,085 kg; and

—a weight of 3,6 kg or more, but not more than 17 kg,

—a weight of 28 kg or more, but not more than 35 kg, and

—with or without plastic sockets

—with a haze value of not more than 1,3 %,

—with dimensions of 1300 mm x 1100 mm or less

—a torque at 20 ^oC of 2,00 Nm or more, but not more than 7,00 Nm,

—an output power of more than 37,5 W, but not more than 2400 W,

—a supply voltage of 9 V or more but not more than 50 V,

—whether or not with or without a speed or rotational direction sensor of resolver type or Hall effect type,

—whether or not coated or passivated with a surface treatment,

—with a diameter of 19 mm or more, but not more than 25 mm,

—2 % (±1,2 %) of lanthanum oxide and neodymium oxide,

—a capacity of not more than 2200 mAh

—a power of 458 Wh or more, but not more than 3510 Wh, and

—a capacity of not more than 2500 Ah and a nominal energy of less than 8,4 kW,

—with an outer diameter of 17 mm or more, but not more than 18 mm,

—with a total thickness of 10 μm or more but not more than 350 μm,

—a rated speed at 20 ^oC of 600 rpm or more, but not more than 3100 rpm,

—a free load current of not more than 20,1 A,

—whether or not a multiple-phase winding,

—whether or not with a mounting flange

—whether or not consisting of segments bonded together and electrically insulated from one another

—whether or not coated or passivated with a surface treatment

—layers of nickel and copper

—with a width of 800 mm or more but not more than 1600 mm

—with or without a pulley,

—a maximum efficiency of 50 % or more

—whether or not with a drive disc,

—a voltage of less than 45 V or more than 70 V

—with or without an electronic power steering sensor/controller

—whether or not with a crankcase,

—whether or not with a fan,

Whether or not:0 %—31.12.20260.5110ex2818109120Sintered corundum with a micro crystalline structure, consisting of aluminium oxide (CAS RN 1344-28-1), magnesium aluminate (CAS RN 12068-51-8) and the rare earth aluminates of yttrium, lanthanum, and neodymium, with a content by weight (calculated as oxides) of:with less than 50 % of the total weight having a particle size of more than 10 mm0 %—31.12.20250.8073ex2912190020Acrylaldehyde (CAS RN 107-02-8) with a purity by weight of 98 % or more for the production of perfume or pharmaceutical intermediaries^note0 %—31.12.20250.8527ex29333999631-Methyl-4-piperidone (CAS RN 1445-73-4) with a purity by weight of 97 % or more0 %—31.12.20280.5131ex2933698055Terbutryn (ISO) (CAS RN 886-50-0) for use as a raw material for the production of technical preservatives, in other sectors than for pesticides^note0 %—31.12.20250.8354ex2933790023(S)-2-Amino-3-[(S)-2-oxopyrrolidin-3-yl]propanamide hydrochloride (CAS RN 2628280-48-6) with a purity by weight of 95 % or more0 %—31.12.20270.8359ex2933998064(1R,2S,5S)-3-[(S)-3,3-dimethyl-2-(2,2,2-trifluoroacetamido)butanoyl]-6,6-dimethyl-3-azabicyclo[3.1.0]hexane-2-carboxylic acid (CAS RN 2755812-45-2) with a purity by weight of 95 % or more0 %—31.12.20270.7318ex3603500010Igniters for gas generators with:0 %—31.12.20280.5727ex3811210029Additive containing by weight:for use in the manufacture of blends of additives for lubricating oils^note0 %—31.12.20270.6435ex3811210048Additives containing:for use in the manufacture of lubricating oils or for use in the manufacture of blends of additives for lubricating oils^note0 %—31.12.20240.8366ex3812399085Light stabilizer, reaction product of stearic acid methyl ester with 1-(2-hydroxy-2-methylpropoxy)-2,2,6,6-tetramethyl-4-piperidinol (CAS RN 300711-92-6) with a purity of less than 90 % by weight0 %—31.12.20270.4520ex3920621932Transparent poly(ethylene terephthalate) film:0 %—31.12.20280.8291ex3921905570Membrane composed of a polyamide layer and a polysulfone layer on a polyethylene terephthalate support layer with:0 %m²31.12.20260.8372ex4411129210Fibreboard:0 %—31.12.20270.8123ex8479899728Integrated electric brake unit for immediate generation of the hydraulic pressure during braking, full electronic brake control and enabling regenerative braking of motor vehicles with:for use in the manufacture of hybrid passenger cars^note0 %—31.12.20250.5577ex8501310050DC motors, brushless, with:0 %—31.12.20270.5978ex85013100ex850132005540DC motor with or without commutator, for driving hand-held power tools, lawn mowers or home appliances, with:0 %—31.12.20240.4731ex8501310058Permanently excited DC motor with:0 %^note—31.12.2024for use in the manufacture of air suspension seats in tractors, earthmoving machines and forklifts or for use in the manufacture of actuators for height-adjustable furniture^note0.7029ex8505111020Articles, of an alloy of neodymium, in the shape of a rectangle, triangle, square, or trapezoid,with:intended to become permanent magnet after magnetisation0 %—31.12.20260.5584ex8505111023Bars in the form of arched rectangles, containing alloy containing neodymium, with:intended to become permanent magnets after magnetisation0 %p/st31.12.20270.7567ex8505111025Permanent magnets, of an alloy of neodymium, cylindrical shaped:0 %—31.12.20240.5585ex8505111028Articles containing alloy containing neodymium, in the form of rings, tubes, bushings or collars:intended to become permanent magnets after magnetisation0 %p/st31.12.20270.3740ex8505111030Permanent magnets of an alloy of neodymium, either in the shape of a rectangle, whether or not rounded, whether or not coated or passivated with a surface treatment, with:or in the shape of an arched rectangle with:or in the shape of a disc with:0 %p/st31.12.20240.5948ex8505111035Article of an alloy of neodymium, in the shape of a disc, with:intended to become permanent magnets after magnetisation0 %—31.12.20240.7789ex8505191020Permanent magnet of agglomerated ferrite, in the shape of arched rectangles, whether or not coated or passivated with a surface treatment, with:for use in the manufacture of electromotor rotors^note0 %—31.12.20240.5937ex8505199030Articles of agglomerated ferrite in the shape of a disc, whether or not coated or passivated with a surface treatment, with:intended to become permanent magnets after magnetisation with a remanence between 245 mT and 470 mT0 %—31.12.20240.7299ex8505199045Article of agglomerated ferrite in the shape of a rectangle, whether or not with oblique sides, with:intended to become a permanent magnet after magnetisation0 %p/st31.12.20270.7511ex8505199060Articles of agglomerated ferrite in the shape of arched rectangles,with:intended to become permanent magnets after magnetisation0 %—31.12.20240.7663ex8507600018Lithium-ion polymer accumulator pack equipped with a battery management system and can-bus interface with:in a metal casing with:for use in the manufacture of vehicle capable of being charged by plugging to external source of electric power of heading 8703^note1,3 %—31.12.20240.8368ex8507600029Lithium-ion rechargeable battery pack in a specific housing, suitable for use in digital still cameras, having:1,3 %—31.12.20240.5548ex8507600038Modules for the assembly of lithium-ion battery packs, with:1,3 %—31.12.20240.8275ex8507600083Modules for the assembly of ion lithium electric accumulators with:for use in the manufacture of vehicles of subheadings 870360, 870370, 870380 and 870460^note1,3 %—31.12.20240.8419ex8507908055Top cap or housing made of aluminium or ferrous alloy or stainless steel:or rectangular with:for use in the manufacture of lithium-ion batteries^note1,3 %—31.12.20240.8507ex8714999050Rear air shock absorber in form of a pneumatic spring element with oil damper for use in the manufacture of bicycles, including electrical bicycles^note0 %p/st31.12.2027

(3)the following entries are inserted according to the numerical order of the CN and TARIC codes in the second and third columns:^noteSerial NumberCN codeTARICDescriptionRate of autonomous dutySupplementary UnitDate envisaged for mandatory review‘0.8619ex2905399525Pinacol (CAS RN 76-09-5) with a purity by weight of 98 % or more0 %—31.12.20280.8604ex2912290065Terephthalaldehyde (CAS RN 623-27-8) with a purity by weight of 98 % or more0 %—31.12.20280.8623ex29189990582,4-D (ISO) (CAS RN 94-75-7) with a purity by weight of 98 % or more0 %—31.12.20280.8641ex29209010231,3,2-Dioxathiolane 2,2-dioxide (CAS RN 1072-53-3) with a purity by weight of 99 %, or more3,2 %—31.12.20280.8621ex2924297034Acetic acid—tert-butyl [(1-aminocyclohexyl)methyl]carbamate (1/1) with a purity by weight of 98 % or more0 %—31.12.20280.8611ex2929900060(2S)-2-[[2-[2-[2-[2-[2-[2-[2-[2-[2-[2-(2-Azidoethoxy)ethoxy]ethoxy]ethoxy]ethoxy]ethoxy]ethoxy]ethoxy]ethylamino]-2-oxoethoxy]acetyl]amino]-N-[4-(hydroxymethyl)phenyl]-6-[[(4-methoxyphenyl)-diphenylmethyl]amino]hexanamide (CAS RN 1224601-12-0) with a purity by weight of 98 % or more0 %—31.12.20280.8640ex2931900043Trimethylindium (CAS RN 3385-78-2) with a purity by weight of 99 % or more0 %—31.12.20280.8649ex29319000484-Phenoxybenzeneboronic acid (CAS RN 51067-38-0) with a purity by weight of 98 % or more0 %—31.12.20280.8652ex2931900058Trimethylgallium (CAS RN 1445-79-0) with a purity by weight of 99 % or more0 %—31.12.20280.8615ex29321900152-Methylfuran (CAS RN 534-22-5) with a purity by weight of 98 % or more0 %—31.12.20280.8636ex2932190025Methyl tetrahydro-2-furancarboxylate (CAS RN 37443-42-8) with a purity by weight of 98 % or more0 %—31.12.20280.8605ex2932190035(2S,3S,4S,5R)-3-(3,4-Difluoro-2-methoxyphenyl)-4,5-dimethyl-5-(trifluoromethyl)tetrahydrofuran-2-yl-4-nitrobenzoate (CAS RN 2875066-49-0) with a purity by weight of 97 % or more0 %—31.12.20280.8603ex29331990581H-Pyrazole (CAS RN 288-13-1) with a purity by weight of 98 % or more0 %—31.12.20280.8613ex29331990681-Methyl-1H-pyrazol-4-amine hydrochloride (CAS RN 127107-23-7) with a purity by weight of 95 % or more0 %—31.12.20280.8639ex29332990432-Octyl-4,5-dihydro-1H-imidazole (CAS RN 10443-60-4) with a purity by weight of 95 % or more0 %—31.12.20280.8637ex29333999535-Methyl-2-pyridylamine (CAS RN 1603-41-4) with a purity by weight of 99 % or more0 %—31.12.20280.8618ex29333999562-[[[3-Methyl-4-(2,2,2-trifluoroethoxy)pyridin-2-yl]methyl]sulfanyl]1H-benzimidazole (CAS RN 103577-40-8) with a purity by weight of 99 % or more0 %—31.12.20280.8624ex2933399958Tert-butyl N-[5-(trifluoromethyl)pyridin-3-yl]carbamate (CAS RN 1187055-61-3) with a purity by weight of 98 % or more0 %—31.12.20280.8656ex2933399966(2S,4S)-4-Ethoxy-2-[4-(methoxycarbonyl)phenyl]piperidin-1-ium(2Z)-3-carboxyprop-2-enoate (CAS RN 2408761-21-5) with a purity by weight of 98 % or more0 %—31.12.20280.8612ex2933599551(1R,5S)-8-Benzyl-3,8-diazabicyclo[3.2.1]octane; 4-(4-hydroxyphenyl)phenol (2:1) (CAS RN 2642049-87-2) with a purity by weight of 95 % or more0 %—31.12.20280.8602ex29335995542-Chloro-4-methylpyrimidine (CAS RN 13036-57-2) with a purity by weight of 99 % or more0 %—31.12.20280.8643ex29339980352-[6-Methyl-2-(4-methylphenyl)imidazo[1,2-a]pyridin-3-yl]acetic acid (CAS RN 189005-44-5) with a purity by weight of 98 % or more0 %—31.12.20280.8642ex29349990382-Chloro-9H-thioxanthen-9-one (CAS RN 86-39-5) with a purity by weight of 98 % or more0 %—31.12.20280.8601ex2934999050Vutrisiran (INN) (CAS RN 1867157-35-4) with a purity by weight of 98 % or more0 %—31.12.20280.8606ex2935909041Lenacapavir sodium (INNM) (CAS RN 2283356-12-5) with a purity by weight of 98 % or more0 %—31.12.20280.8635ex2940000070Alpha-D-Mannopyranose, 6-acetate 2,3,4-tribenzoate 1-(2,2,2-trichloroethanimidate) (CAS RN 346441-49-4) with a purity by weight of 95 % or more0 %—31.12.20280.8614ex2942000020Dimethylamine—borane (1:1) (CAS RN 74-94-2) with a purity by weight of 98 % or more0 %—31.12.20280.8678ex3204170028Colourant C.I. Pigment Yellow 12 (CAS RN 6358–85-6) and preparations based thereon with a colourant C.I. Pigment Yellow 12 content of 21 % or more by weight0 %—31.12.20280.8676ex3207300030Silver paste, containing by weight:

—45 % or more, but not more than 90 % silver (CAS RN 7440-22-4) and

—with a weight of 6,4 kg or more, but not more than 8,3 kg

—with a length of 140 mm or more but not more than 215 mm,

—a dilution steam generator system which produces steam from pretreated quench water for use as dilution steam in steam cracking furnaces,

—2 mounting holes with a diameter of 31 mm,

—a direct current operating voltage of more than 10 V but not more than 14 V, or

—with an operating voltage of 9 VDC or more but not more than 16 VDC,

—quench water circulation loops, which contain a heat exchanger and circulation pumps to cool and recirculate quench water,

—a propane feedstock preparation system, which filters, vaporizes and superheats propane feedstock, before sending the propane to cracking furnaces (outside the module), and

—an open loop ethylene refrigeration system, which is to be integrated with an external ethylene refrigerant compressor,

—coolers,

—caustic water circulation pumps to support an external caustic wash tower in removing acid gasses (carbon dioxide and hydrogen sulphide) from the cracked gas,

—72 % or more but not more than 82 % aluminium (CAS RN 7429-90-5)

—in the form of hedge trimmer attachment,

—various distillation columns (depropanizer, debutanizer and degreenoiler) and their associated heat exchangers, pumps and drums,

—a system for filtering and cooling of dried cracked gas,

—made of lightweight alloys and steel,

—with a rated power of 240 W or more, but not more than 260 W,

—of EN AC-47100-F aluminum,

—of EN AC-47100 aluminum,

—49 % or more but not more than 51 % of ethylene carbonate (CAS RN 96-49-1), and

—transmitting torque from the motor shaft to the cutting device pulley,

—a length of 820 mm or more, but not more than 882 mm,

—a length of 190 mm or more but not more than 380 mm,

—multiple connected lithium-ion accumulator cells,

—made with plastics and non-ferrous metals,

—a voltage of 11 V or more, but not more than 15 V,

—an input waterproof connector,

—with a thickness of 50 μm or more,

—with a gloss of more than 25 degrees according to ASTM D 2457,

—a density of 20 kg/m³ or more, but not more than 40 kg/m³,

—a steel bracket with at least one mounting hole and

—covered with diamond grains of 5 μm or more but not more than 55 μm,

—a length of 155 mm or more, but not more than 158 mm,

—59 % or more, but not more than 92 % of the total solids (including silver)

—with a height of 104 mm or more but not more than 138 mm,

—a condensate system that collects, filters and deaerates steam condensates, which are subsequently recycled as boiler feed water and further distributed within the cracker unit, and

—a choke bore diameter of 18 mm or more, but not more than 19,05 mm

—an alternating current operating voltage of more than 185 V, but not more than 254 V,

—with a centrifugal electric fan,

—a water purification system, which removes hydrocarbon contaminants from quench water which is then re-used for dilution steam production (outside the module),

—a chemical grade propylene preparation system, which filters and dries chemical grade propylene before sending it to the deethanizer (outside the module)

—pumps and a heat exchanger to deliver ethylene to an external pipeline, and

—vapor-liquid separation drums, and

—a spent caustic pre-treatment system, containing separation drums, pumps and mixers,

—with a viscosity of 10 or more, but not more than 100 Pa.s (Brookfield RVT, 14 Spindle, 20 rpm, 25 ^oC±0,5 ^oC)

—with a knife length of 60 cm and teeth opening of 30 mm,

—a chilling train containing heat exchangers and a drum which condenses C2 in a gas stream,

—a deethanizer distillation column and associated equipment for C2-/C3+ separation,

—built on straight or helical bevel gears,

—built on straight bevel gears,

—with a voltage of 36 V or higher, but not higher than 52 V

—with voltage of 36 V or higher, but not higher than 52 V,

—with a sealing cap of stainless steel,

—shot-blasted and machined,

—with overmolded bearing sleeves of martensitic stainless steel and assembled sealing caps of stainless steel,

—49 % or more but not more than 51 % of 1,3-propanesultone (CAS RN 1120-71-4)

—containing field coil, rotor, hub and armature,

—a width of 390 mm or more, but not more than 655 mm,

—a width of 90 mm or more but not more than 150 mm,

—charging and monitoring electronics,

—with the electric components cast in epoxy resin,

—a circular shape,

—four or more output connectors,

—with a width of 6,30 mm or more but not more than 740 mm,

—whether or not covered on one side with a protective film of polyethylene terephthalate and on the other side with a micro-structured pressure sensitive acrylic adhesive and a release liner

—a tensile strength of not less than 170 kPa,

—silent block,

—with a wire diameter of 45 μm or more, but not more than 350 μm

—a height of 115 mm or more, but not more than 120 mm,

—with an aluminium particle size of not more than 25 μm

—a pyrolysis oil purification system, which separates pyrolysis gasoline, heavy oil and coke fractions from the hydrocarbon contaminants that have been removed from the quench water,

—a closed loop propylene refrigeration system, which is to be integrated with an external propylene refrigerant compressor

—pumps needed to condense and remove water and heavier hydrocarbons and to avoid undesirable formation of polymer by-products,

—a heat exchanger for the pre-cooling of cracked gas, and

—with angle adjustment of the blade,

—a system to separate hydrogen and methane from cracked gas containing heat exchangers, drums, turbines, compressors and a hydrogen purification unit (pressure swing adsorption unit),

—an acetylene hydrogenation system to remove acetylene within a C2 stream,

—with an angle between the shafts of 30 degrees or more but not more than 90 degrees

—with an angle between the shafts of 24 degrees or more but not more than 35 degrees,

—with a torque of 20 Nm or more, but not more than 140 Nm,

—an elongation at break of not more than 200 %, and

—with torque of 30 Nm or more, but not more than 50 Nm,

—shot-blasted and machined,

—leakproof to the degree of 3 ml per minute or less under 2,75 bar pressure,

—shot-blasted and machined,

—with an operating voltage of 12 V

—a height of 110 mm or more, but not more than 137 mm,

—a height of 4 mm or more but not more than 15 mm,

—a power of 74 Wh or more, but not more than 75 Wh,

—to generate the ignition energy and to electronically control the ignition timing,

—2 terminals,

—water absorption coefficient of not greater than 1 %,

—two or more plastic clips for attachment

—a breaking strength of 11 N or more but not more than 170 N

—a blind spot sensor with a blind spot motion detection light module, with an edge luminescence greater than or equal to 5000 cd/m² and a central luminescence greater than or equal to 7000 cd/m²,

—with curvature radius of 0 mm or more but not more than 1330 mm,

—a flare system that collects, separates and vaporizes non-recyclable hydrocarbon containing releases from different equipment in a steam cracker, and transfers those towards flares

—an operating temperature of - 40 ^oC or higher, but not higher than 70 ^oC,

—with a connector,

—coated on one side with a pressure sensitive silicone adhesive with a thickness of not more than 50 μm

—a fuel gas drum that stores fuel gas for cracker furnaces, and

—with a gear 1:1,3 ratio or more but not more than 1:1,46,

—with a housing made of aluminum, aluminum alloy or plastic,

—with communication function UART or CAN interface,

—leakproof to the degree of 1 ml per minute or less under 2,75 bar pressure,

—with a hardness of 70 HBW or more (2,5/62,5, according to ISO 6506)

—a rotor chamber, leakproof to the degree of 3 ml per minute or less under 2,75 bar pressure,

—a current of 3,93 A current or more but not more than 6,86 A,

—a weight of 60 kg or more, but not more than 165 kg, and

—a weight of 0,1 kg or more but not more than 1,2 kg,

—a length of 5 mm or more but not more than 300 mm,

—in a plastic housing with electrical connection contacts and LCD display,

—to connect spark plug and circuit breaker,

—an outer diameter of the housing of 42,3 mm,

—a heater foil, with a resistance of 1,1 kΩ or more, but not more than 1,35 kΩ,

—with a reflectance of more than 40 %,

—with a plastic case,

—an ethane feedstock start-up vaporizer and superheater, which vaporizes and heats ethane feedstock before sending the ethane to the cracking furnaces (outside the module),

—a separation drum for the removal of water from cracker gas

—with integrated single stage gearbox,

—associated equipment of a C3 splitter distillation column, containing heat exchanger, pumps and drums, and

—a height of 10 mm or more but not more than 400 mm,

—with a hardness of 70 HBW or more (2,5/62,5, according to ISO 6506)

—a resistance of 1,84 ohm or more but not more than 3,05 ohm (operating at 20 ^oC),

—a power of 11300 Wh or more, but not more than 29360 Wh

—a nominal voltage of 3,0 VDC or more but not more than 4,0 VDC,

—a diode voltage of 42 V or more, but not more than 48 V and

—with or without a control unit for the fan electric motor,

—with a magnesium cast body,

—a vinyl acetylene hydrogenation system, containing hydrogenation reactors, filters, mixer, drum, condenser, heat exchangers

—a system to regenerate dryers in a cracker installation

—with or without a built-in controller,

—with internal planetary gearbox with fixed or variable ratio,

—with a hardness of 70 HBW or more (2,5/62,5, according to ISO 6506),

—with a tensile strength of 240 N/mm² or more,

—a depth of 5 mm or more but not more than 250 mm

—with a communication function in the LIN or UART interface,

—made by CNC machined casting,

—with a tensile strength of 240 N/mm² or more,

—with a height of 225 mm or more, but not more than 280 mm,

—with a tensile strength of 240 N/mm² or more,

—a static torque of 108 Nm or more but not more than 305 Nm

—a nominal capacity of not more than 90 Ah,

—a current of 55 mA or more, but not more than 65 mA

—weighing 1,5 kg or more, but not more than 5,0 kg,

—with housing made of aluminum,

—with a height of 50 mm or more, but not more than 55 mm,

—with a diameter of 300 mm or more, but not more than 310 mm,

—with a height of 245 mm or more, but not more than 360 mm,

—adapted for mounting in a bicycle frame

—weighing 2,3 kg or more, but not more than 4,4 kg,

—with a diameter of 109 mm or more, but not more than 112 mm,

—with a weight of 3,8 kg or more, but not more than 4,9 kg

—with a width of 360 mm or more, but not more than 525 mm,

—adapted for mounting in the front or rear bicycle wheel^note

—with a weight of 3,9 kg or more but not more than 4,2 kg

—with a length of 345 mm or more, but not more than 450 mm,

for use as conductor in the production of solar cells^note0 %^note—31.12.20280.8630ex3207300040Aluminium paste, containing by weight:for use in the production of solar cells^note0 %—31.12.20280.8655ex3811290023Additive for lubricating oils consisting of molybdenum, bis(dibutylcarbamodithioato)di-μ-oxodioxodi-, sulfurized (CAS RN 68412-26-0)0 %—31.12.20280.8644ex3824999271Mixture containing by weight:3,2 %—31.12.20280.8670ex3910000085Two-component silicone, with a viscosity of the mixture of 3000 cps or more, but not more than 6000 cps (according to standard GB/T 2794) for use as an electrical insulation material in solar panels junction box in the production of solar panels^note0 %—31.12.20280.8667ex39191080ex391990807848Polytetrafluoroethylene film,0 %—31.12.20280.8629ex3919908055Black polyvinyl chloride film:for use in the manufacture of die-cut films for interior and exterior surfaces of cars^note0 %—31.12.20280.8664ex3926909722Gaskets for road vehicles mirrors and their components, made of polyethylene foam, produced by a thermoforming process and with:0 %—31.12.20280.8646ex4016995210Hanger of the exhaust muffler consisting of:for use in the manufacture of goods of Chapter 87^note0 %—31.12.20280.8666ex6804210030Steel wire used for cropping and squaring semiconductors:0 %—31.12.20280.8663ex7009910010Chrome-plated glass mirror with:designed to be mounted in a housing as an exterior vehicle mirror, for use in the manufacture of car mirrors^note0 %—31.12.20280.8682ex7009910020Aspherical, convex or flat chrome-plated glass, ready for framing:for the manufacture of automotive mirrors^note0 %—31.12.20280.8616ex7019900050Insulating rigid panels made by vacuum compression of glass fibres wrapped in protective gas-tight film, for use in the manufacture of refrigerators and freezers and their combinations^note0 %—31.12.20280.8668ex8402900010Pre-assembled process module unit of an ethane cracker unit, containing:0 %—30.06.20250.8610ex8409910028Carburetor with:for use in the manufacture of a two-stroke engine grass trimmer^note0 %—31.12.20280.8651ex8414592550Axial fans with built-in motor, for the generation of an air flow for the cooling of compressors and the distribution of air withfor use in the manufacture of heat pump tumble dryers and refrigerators or freezers^note0 %—31.12.20280.8648ex8414593540Electric blower for cooling the battery module:for use in the production of rechargeable batteries for hybrid and electric vehicles^note0 %—31.12.20280.8679ex8417805010Pre-assembled process module unit of an ethane cracker unit, exceeding 29 meters in length, 35 meters in width and 66 meters in height and 5500 metric ton in weight, containing two steam-cracking non-electric furnaces for de-hydrogenation as a part of an ethane cracker plant consisting of a radiation section and a convection section to produce ethylene and propylene from ethane0 %—30.06.20250.8669ex8419400010Pre-assembled process module unit of an ethane cracker unit, containing:0 %—30.06.20250.8680ex8419508020Pre-assembled process module unit of an ethane cracker unit, containing:0 %—30.06.20250.8675ex8419899810Pre-assembled process module unit of an ethane cracker unit, containing:equipment associated with an external multi-stage, centrifugal cracked gas compressor which compresses hydrocarbon gases to allow further processing downstream in interconnected equipment containing:0 %—30.06.2025equipment associated with an external caustic wash tower containing:0.8632ex8467990010Pole hedge trimmer cutting elements:for use in the manufacture of garden machinery and power tools^note0 %—31.12.20280.8673ex8479899733Pre-assembled process module unit of an ethane cracker unit, containing:0 %—30.06.20250.8681ex8479899743Pre-assembled process module unit of an ethane cracker unit, containing:0 %—30.06.20250.8626ex8483402320Bevel gear:for use in the manufacture of grass trimmers, brushcutters and other types of garden machinery^note0 %—31.12.20280.8625ex8483402330Bevel gear:for use in the manufacture of grass trimmers, brushcutters and other types of garden machinery^note0 %—31.12.20280.8609ex8501310048Brushless DC electric motors:for use in the manufacture of e-bikes^note0 %—31.12.20280.8608ex8501310049Brushless DC electric motors:0 %—31.12.20280.8662ex8503009953Pressure casted rotor cover of the cooling channel system in the electrical motor:0 %—31.12.20280.8658ex8503009958Pressure casted inner housing of a cooling channel system for an electrical motor:0 %—31.12.20280.8659ex8503009963Pressure casted outer housing of an electrical motor:0 %—31.12.20280.8627ex8505200040Electromagnetic clutch:for use in the manufacture of rider type self-propelled mowers^note0 %—31.12.20280.8660ex8507600026Modules for the assembly of electric accumulators using lithium ferrophosphate technology (LFP) with:1,3 %—31.12.20280.8645ex8507600028Lithium-ion rechargeable battery cell with:for use in the manufacture of rechargeable hybrid and electric vehicle batteries^note1,3 %—31.12.20280.8654ex8507600036Lithium-ion accumulator, withfor use in the manufacture of cordless vacuum cleaners or rechargeable power sources therefor^note1,3 %—31.12.20280.8628ex8511800030Ignition module:for use in the manufacture of two-stroke engines^note0 %—31.12.20280.8633ex8512200025An electrical component with an integrated LED, in an ABS housing, with:0 %—31.12.20280.8647ex8544300075Wiring harness to connect the integrated battery system with the car’s control systems, containing:for use in the production of rechargeable batteries for hybrid and electric vehicles^note0 %—31.12.2028

The Annex to Regulation (EU) 2021/2278 is amended as follows:

Article 1#

Article 2#

Article 1 #

Article 2 #