Contents
THE EUROPEAN COMMISSION,Having regard to the Treaty on the Functioning of the European Union,Having regard to Regulation (EC) No 1831/2003 of the European Parliament and of the Council of 22 September 2003 on additives for use in animal nutritionnote, and in particular Article 9(2) thereof,Whereas:
(1)Regulation (EC) No 1831/2003 provides for the authorisation of additives for use in animal nutrition and for the grounds and procedures for granting such an authorisation. Article 10(2) of that Regulation provides for the re-evaluation of additives authorised pursuant to Council Directive 70/524/EECnote.
(2)The substances acetic acid, calcium acetate and sodium diacetate were authorised without a time limit in accordance with Directive 70/524/EEC, as feed additives for all animal species. Those substances were subsequently entered in the Register of feed additives as existing products, in accordance with Article 10(1), point (b), of Regulation (EC) No 1831/2003.
(3)In accordance with Article 10(2) of Regulation (EC) No 1831/2003 in conjunction with Article 7 thereof, an application was submitted for the re-evaluation of acetic acid, calcium acetate and sodium diacetate for fish. The applicant requested the additives to be classified in the additive category ‘technological additive’ and in the functional group ‘preservatives’. The applications were accompanied by the particulars and documents required under Article 7(3) of Regulation (EC) No 1831/2003.
(4)The European Food Safety Authority (‘the Authority’) concluded in its opinion of 6 July 2023note that acetic acid (and its salts) are safe for all fish at the maximum recommended level of 2500 mg acetic acid/kg complete feed. The Authority concluded in its previous opinions of 1 February 2012note and 6 May 2021note that acetic acid, sodium diacetate and calcium acetate do not have an adverse effect on consumer safety or the environment and that the risks for users handling acetic acid depend on the concentration and include skin, eyes, and respiratory tract irritation (10–25 % solution) and corrosion (> 25 % solution) and that the salts of acetic acid are considered as strongly irritant and a particular risk for the eyes. The Authority further concluded that acetic acid and its salts have the potential to act as preservatives in feedingstuffs. It also verified the report on the method of analysis of the feed additive in feed submitted by the Reference Laboratory set up by Regulation (EC) No 1831/2003.
(5)In view of the above, the Commission considers that acetic acid, calcium acetate and sodium diacetate satisfy the conditions provided for in Article 5 of Regulation (EC) No 1831/2003. Accordingly, the use of those substances should be authorised. In addition, the Commission considers that appropriate protective measures should be taken to prevent adverse effects on the health of the users of the additives.
(6)Since safety reasons do not require the immediate application of the modifications to the conditions of authorisation of the substances concerned, it is appropriate to provide for a transitional period for interested parties to prepare themselves to meet the new requirements resulting from the authorisation.
(7)The measures provided for in this Regulation are in accordance with the opinion of the Standing Committee on Plants, Animals, Food and Feed,
HAS ADOPTED THIS REGULATION:
Article 1Authorisation#
The substances specified in the Annex, belonging to the additive category ‘technological additives’ and to the functional group ‘preservatives’, are authorised as feed additives in animal nutrition, subject to the conditions laid down in that Annex.
Article 2Transitional measures#
1.Acetic acid, calcium acetate and sodium diacetate, as authorised pursuant to Directive 70/524/EEC and premixtures containing these additives, which are produced and labelled before 16 January 2025 in accordance with the rules applicable before 16 July 2024 may continue to be placed on the market and used until the stocks concerned are exhausted if they are intended for fish.
2.Compound feed and feed materials containing the feed additives referred to in paragraph 1, which are produced and labelled before 16 July 2025 in accordance with the rules applicable before 16 July 2024 may continue to be placed on the market and used until the stocks concerned are exhausted if they are intended for food-producing fish.
3.Compound feed and feed materials containing the feed additives referred to in paragraph 1, which are produced and labelled before 16 July 2026 in accordance with the rules applicable before 16 July 2024 may continue to be placed on the market and used until the stocks concerned are exhausted if they are intended for non-food producing fish.
Article 3Entry into force#
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
| Identi-fication number of the feed additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | Minimum content | Maximum content | Other provisions | End of period of authorisation |
|---|---|---|---|---|---|---|---|---|
| mg of additive/kg of complete feedingstuff with a moisture content of 12 % | ||||||||
| Category: technological additives. Functional group: preservatives | ||||||||
| 1a260 | Acetic acid | Additive compositionAcetic acid ≥ 99,8 %Liquid formCharacterisation of the active substanceAcetic acid ≥ 99,8 %C2H4O2CAS no 64-19-7Water ≤ 0,15 %Non volatile matter ≤ 30 mg/kgFormic acid and its salts and other oxidisable material ≤ 0,5 g/kgProduced by chemical synthesis including cellulose production (as a by-product)Method of AnalysisnoteFor the determination of acetic acid as total acetic acid in the feed additive, premixtures and compound feed:Ion Chromatography with Conductivity Detection, IC-CD (EN 17294) | Fish | - | - | 2500 | 1. The mixture of different sources of acetic acid shall not exceed the permitted maximum levels in complete feedingstuffs.2. For users of the additive and premixtures, feed business operators shall establish operational procedures and appropriate organisational measures to address the potential risks resulting from its use. Where those risks cannot be eliminated by such procedures and measures, the additive and premixtures shall be used with personal skin, eye and breathing protective equipment.3. In the directions for use of the additive, premixture and related feedingstuffs, the following labelling provisions shall be indicated: The simultaneous use of different organic acids is contraindicated where one or more of them is used at or near the maximum permitted content. | 16 July 2034 |
| Identi-fication number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | Minimum content | Maximum content | Other provisions | End of period of authorisation |
|---|---|---|---|---|---|---|---|---|
| mg of additive/kg of complete feedingstuff with a moisture content of 12 % | ||||||||
| Category: technological additives. Functional group: preservatives | ||||||||
| 1a262 | Sodium diacetate | Additive compositionSodium diacetate ≥ 97 %Solid formCharacterisation of the active substanceSodium diacetate (anhydrous and trihydrate)NaC4H7O4CAS no 126-96-5Sodium acetate ≥ 58 %Acetic acid ≥ 39 %Water ≤ 2 %Formic acid and its salts and other oxidisable material ≤ 1g/kgProduced by chemical synthesisMethod of AnalysisnoteFor the determination of sodium in the feed additive:EN ISO 6869: atomic absorption spectrometry (AAS) orEN 15510: inductively coupled plasma-atomic emission spectrometry (ICP-AES)For the determination of sodium diacetate as total acetic acid in the feed additive, premixtures and compound feed:Ion Chromatography with Conductivity Detection, IC-CD (EN 17294) | Fish | - | - | 2500 (as acetic acid) | 1. The mixture of different sources of acetic acid shall not exceed the permitted maximum levels in complete feedingstuffs.2. For users of the additive and premixtures, feed business operators shall establish operational procedures and appropriate organisational measures to address the potential risks resulting from its use. Where those risks cannot be eliminated by such procedures and measures, the additive and premixtures shall be used with personal skin, eye and breathing protective equipment.3. In the directions for use of the additive, premixture and related feedingstuffs, the following labelling provisions shall be indicated: The simultaneous use of different organic acids is contraindicated where one or more of them is used at or near the maximum permitted content. | 16 July 2034 |
| Identi-fication number of the additive | Additive | Composition, chemical formula, description, analytical method | Species or category of animal | Maximum age | Minimum content | Maximum content | Other provisions | End of period of authorisation |
|---|---|---|---|---|---|---|---|---|
| mg of additive/kg of complete feedingstuff with a moisture content of 12 % | ||||||||
| Category: technological additives. Functional group: preservatives | ||||||||
| 1a263 | Calcium acetate(anhydrous and monohydrate) | Additive compositionCalcium acetate ≥ 98,7 %Solid formCharacterisation of the active substanceCalcium acetate ≥ 98,7 %C4H6CaO4CAS no 62-54-4Water ≤ 6 %Formic acid and its salts and other oxidisable material ≤ 1g/kgProduced by chemical synthesisMethod of AnalysisnoteFor the determination of calcium in the feed additive:EN ISO 6869: atomic absorption spectrometry (AAS) orEN 15510: inductively coupled plasma-atomic emission spectrometry (ICP-AES)For the determination of calcium acetate as total acetic acid in the feed additive, premixtures and compound feed:Ion Chromatography with Conductivity Detection, IC-CD (EN 17294) | Fish | - | - | 2500(as acetic acid) | 1. The mixture of different sources of acetic acid shall not exceed the permitted maximum levels in complete feedingstuffs.2. For users of the additive and premixtures, feed business operators shall establish operational procedures and appropriate organisational measures to address the potential risks resulting from its use. Where those risks cannot be eliminated by such procedures and measures, the additive and premixtures shall be used with personal skin, eye and breathing protective equipment.3. In the directions for use of the additive, premixture and related feedingstuffs, the following labelling provisions shall be indicated: The simultaneous use of different organic acids is contraindicated where one or more of them is used at or near the maximum permitted content. | 16 July 2034 |
Source: EUR-Lex, © European Union, 1998-2026. Reuse authorised under Decision 2011/833/EU.