Notes:1.The information provided herein is complementary to the route compatibility check, which is assumed to have already been performed for a train intended to operate on a route. It has to be provided by the infrastructure managers through RINF. Those parameters can be published in RINF Application by using the concept of “common characteristics subset” as defined in ERA vocabulary and RINF Implementing Regulation (EU) 2019/777 as amended by Implementing Regulation (EU) 2023/1694.2.Most of the information listed below is not otherwise visible to the driver or can only be indirectly perceived under certain operational conditions, usually by observing the system behaviour in certain situations.3.Item 1.5 lists the minimum set of ETCS National Values required to be made available to the railway undertakings. Infrastructure managers shall also provide upon request to a railway undertaking the complete set of National Values.4.The ERTMS terms mentioned in the table are defined in the glossary and system requirements specification of the Control-command and Signalling TSI (under indexes 3 and 4 respectively of Appendix A).5.The information provided in this Appendix will enhance drivers’ knowledge of the operational conditions they need to consider when running under ERTMS in the infrastructure manager’s network. It can be used in drivers’ training and may be integrated under internal railway undertaking rules and procedures.