Contents
THE COUNCIL OF THE EUROPEAN UNION,Having regard to the Treaty on the Functioning of the European Union, and in particular Article 31 thereof,Having regard to the proposal from the European Commission,Whereas:
(1)In order to ensure a sufficient and uninterrupted supply of certain agricultural and industrial products which are produced in insufficient quantities in the Union and thereby avoid any disturbances on the market for those products, autonomous tariff quotas of the Union (‘quotas’) were opened by Council Regulation (EU) 2021/2283note. Within those quotas, products can be imported into the Union at reduced or zero duty rates.
(2)As it is in the Union's interest to ensure an adequate supply of certain industrial products, and having regard to the fact that identical, equivalent or substitute products are not produced in sufficient quantities within the Union, it is necessary to open new quotas with order numbers 09.2819, 09.2839, 09.2855, 09.2857 and 09.2702 at zero duty rates for appropriate quantities of those products.
(3)As the scope of the quotas with order numbers 09.2583 and 09.2876 has become inadequate to fulfil the needs of the economic operators in the Union, the description of the products covered by those quotas should be amended. The indication of the applicable TARIC code for those products should therefore be amended.
(4)As it is no longer in the Union's interest to maintain the quotas with order numbers 09.2637, 09.2679 and 09.2740, those quotas should be closed with effect from 1 July 2022.
(5)Taking into account the amendments to be made and for the sake of clarity, the Annex to Regulation (EU) 2021/2283 should be replaced.
(6)In order to avoid any interruption in the application of the quota scheme and to comply with the guidelines set out in the communication from the Commission of 13 December 2011 concerning autonomous tariff suspensions and quotas, the changes provided for in this Regulation regarding the quotas for the products concerned should apply from 1 July 2022. This Regulation should therefore enter into force as a matter of urgency,
HAS ADOPTED THIS REGULATION:
Article 1#
The Annex to Regulation (EU) 2021/2283 is replaced by the text set out in the Annex to this Regulation.
Article 2#
This Regulation shall enter into force on the day following that of its publication in the Official Journal of the European Union.It shall apply from 1 July 2022.
‘’
| Order number | CN code | TARIC | Description | Quota period | Quota volume | Quota duty rate |
|---|---|---|---|---|---|---|
| 09.2849 | ex07108069 | 10 | Mushrooms of the species Auricularia polytricha (uncooked or cooked by steaming or boiling), frozen, for the manufacture of prepared mealsnotenote | 1.1.-31.12. | 700 tonnes | 0 % |
| 09.2664 | ex20086039 | 30 | Sweet cherries containing added spirit, with a sugar content of not more than 9 % by weight, of a diameter of not more than 19,9 mm, with stones, for use in chocolate productsnote | 1.1.-31.12. | 1000 tonnes | 10 % |
| 09.2913 | ex24011035ex24011070ex24011095ex24011095ex24011095ex24012035ex24012070ex24012095ex24012095ex24012095 | 91101121919110112191 | Natural unmanufactured tobacco, whether or not cut in regular size, having a custom value of not less than EUR 450 per 100 kg net weight, for use as binder or wrapper for the manufacture of goods falling within subheading 24021000note | 1.1.-31.12. | 6000 tonnes | 0 % |
| 09.2828 | 27122090 | Paraffin wax containing by weight less than 0,75 % of oil | 1.1.-31.12. | 100000 tonnes | 0 % | |
| 09.2600 | ex27129039 | 10 | Slack wax (CAS RN 64742-61-6) | 1.1.-31.12. | 100000 tonnes | 0 % |
| 09.2578 | ex28111980 | 50 | Sulphamidic acid (CAS RN 5329-14-6) with a purity by weight of 95 % or more, whether or not with not more than 5 % addition of the anti-caking agent silicon dioxide (CAS RN 112926-00-8) | 1.1.-31.12. | 27000 tonnes | 0 % |
| 09.2928 | ex28112200 | 40 | Silica filler in the form of granules, with a purity by weight of 97 % or more of silicon dioxide | 1.1.-31.12. | 1700 tonnes | 0 % |
| 09.2806 | ex28259040 | 30 | Tungsten trioxide, including blue tungsten oxide (CAS RN 1314-35-8 or CAS RN 39318-18-8) | 1.1.-31.12. | 12000 tonnes | 0 % |
| 09.2819 | ex28332500 | 30 | Copper hydroxide sulfate (Cu4(OH)6(SO4)), hydrate (CAS RN 12527-76-3) with a purity by weight of 98 % or more | 1.7.-31.12. | 120000 kilograms | 0 % |
| 09.2872 | ex28332980 | 40 | Caesium sulphate (CAS RN 10294-54-9) in solid form or as aqueous solution containing by weight 48 % or more but not more than 52 % of caesium sulphate | 1.1.-31.12. | 400 tonnes | 0 % |
| 09.2567 | ex29032200 | 10 | Trichloroethylene (CAS RN 79-01-6) with a purity by weight of 99 % or more | 1.1.-31.12. | 11885000 kilograms | 0 % |
| 09.2837 | ex29037930 | 20 | Bromochloromethane (CAS RN 74-97-5) | 1.1.-31.12. | 600 tonnes | 0 % |
| 09.2933 | ex29039980 | 30 | 1,3-Dichlorobenzene (CAS RN 541-73-1) | 1.1.-31.12. | 2600 tonnes | 0 % |
| 09.2700 | ex29051200 | 10 | Propan-1-ol (propyl alcohol) (CAS RN 71-23-8) | 1.1.-31.12. | 15000 tonnes | 0 % |
| 09.2830 | ex29061900 | 40 | Cyclopropylmethanol (CAS RN 2516-33-8) | 1.1.-31.12. | 20 tonnes | 0 % |
| 09.2851 | ex29071200 | 10 | O-cresol (CAS RN 95-48-7) having a purity of not less than 98,5 % by weight | 1.1.-31.12. | 20000 tonnes | 0 % |
| 09.2704 | ex29094980 | 20 | 2,2,2',2'-Tetrakis(hydroxymethyl)-3,3'-oxydipropan-1-ol (CAS RN 126-58-9) | 1.1.-31.12. | 500 tonnes | 0 % |
| 09.2565 | ex29141990 | 70 | Calcium acetylacetonate (CAS RN 19372-44-2) with a purity by weight of 95 % or more | 1.1.-31.12. | 400 tonnes | 0 % |
| 09.2852 | ex29142900 | 60 | Cyclopropyl methyl ketone (CAS RN 765-43-5) | 1.1.-31.12. | 300 tonnes | 0 % |
| 09.2638 | ex29152100 | 10 | Acetic acid (CAS RN 64-19-7) of a purity by weight of 99 % or more | 1.1.-31.12. | 1000000 tonnes | 0 % |
| 09.2702 | 29153200 | Vinyl acetate (CAS RN 108-05-4) | 1.7.-31.12. | 225000 tonnes | 0 % | |
| 09.2728 | ex29159070 | 85 | Ethyl trifluoroacetate (CAS RN 383-63-1) | 1.1.-31.12. | 400 tonnes | 0 % |
| 09.2665 | ex29161995 | 30 | Potassium (E,E)-hexa-2,4-dienoate (CAS RN 24634-61-5) | 1.1.-31.12. | 8250 tonnes | 0 % |
| 09.2684 | ex29163990 | 28 | 2,5-Dimethylphenylacetyl chloride (CAS RN 55312-97-5) | 1.1.-31.12. | 700 tonnes | 0 % |
| 09.2599 | ex29171100 | 40 | Diethyl oxalate (CAS RN 95-92-1) | 1.1.-31.12. | 500 tonnes | 0 % |
| 09.2769 | ex29171390 | 10 | Dimethyl sebacate (CAS RN 106-79-6) | 1.1.-31.12. | 1000 tonnes | 0 % |
| 09.2634 | ex29171980 | 40 | Dodecanedioic acid (CAS RN 693-23-2), of a purity by weight of more than 98,5 % | 1.1.-31.12. | 8000 tonnes | 0 % |
| 09.2808 | ex29182200 | 10 | O-acetylsalicylic acid (CAS RN 50-78-2) | 1.1.-31.12. | 120 tonnes | 0 % |
| 09.2646 | ex29182900 | 75 | Octadecyl 3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate (CAS RN 2082-79-3) with:a sieve passing fraction at a mesh width of 500 μm of more than 99 % by weight, anda melting point of 49 °C or more, but not more than 54 °C,for use in the manufacture of PVC processing stabilizer-one packs based on powder mixtures (powders or press granulates)note | 1.1.-31.12. | 380 tonnes | 0 % |
| 09.2647 | ex29182900 | 80 | Pentaerythritol tetrakis(3-(3,5-di-tert-butyl-4-hydroxyphenyl)propionate) (CAS RN 6683-19-8) with:a sieve passing fraction at a mesh width of 250 μm of more than 75 % by weight and at a mesh width of 500 μm of more than 99 % by weight, anda melting point of 110 °C or more, but not more than 125 °C,for use in the manufacture of PVC processing stabilizer-one packs based on powder mixtures (powders or press granulates)note | 1.1.-31.12. | 140 tonnes | 0 % |
| 09.2975 | ex29183000 | 10 | Benzophenone-3,3’,4,4’-tetracarboxylic dianhydride (CAS RN 2421-28-5) | 1.1.-31.12. | 1000 tonnes | 0 % |
| 09.2688 | ex29202900 | 70 | Tris (2,4-di-tert-butylphenyl)phosphite (CAS RN 31570-04-4) | 1.1.-31.12. | 6000 tonnes | 0 % |
| 09.2598 | ex29211999 | 75 | Octadecylamine (CAS RN 124-30-1) | 1.1.-31.12. | 400 tonnes | 0 % |
| 09.2649 | ex29212900 | 60 | Bis(2-dimethylaminoethyl)(methyl)amine (CAS RN 3030-47-5) | 1.1.-31.12. | 1700 tonnes | 0 % |
| 09.2682 | ex29214100 | 10 | Aniline (CAS RN 62-53-3) with a purity by weight of 99 % or more | 1.1.-31.12. | 150000 tonnes | 0 % |
| 09.2617 | ex29214200 | 89 | 4-Fluoro-N-(1-methylethyl)benzeneamine (CAS RN 70441-63-3) | 1.1.-31.12. | 500 tonnes | 0 % |
| 09.2602 | ex29215119 | 10 | O-phenylenediamine (CAS RN 95-54-5) | 1.1.-31.12. | 1800 tonnes | 0 % |
| 09.2563 | ex29224100 | 20 | L-Lysine hydrochloride (CAS RN 657-27-2) or an aqueous solution of L-lysine (CAS RN 56-87-1), containing by weight 50 % or more of L-lysine | 1.7.-31.12. | 122500 tonnes | 0 % |
| 09.2592 | ex29225000 | 25 | L-Threonine (CAS RN 72-19-5) | 1.1.-31.12. | 166000 tonnes | 0 % |
| 09.2575 | ex29239000 | 87 | 3-Chloro-2-hydroxypropyl)trimethylammonium chloride (CAS RN 3327-22-8), in the form of an aqueous solution containing by weight 65 % or more but not more than 71 % 3-chloro-2-hydroxypropyl)trimethylammonium chloride | 1.1.-31.12. | 19000 tonnes | 0 % |
| 09.2854 | ex29241900 | 85 | 3-Iodoprop-2-yn-1-yl butylcarbamate (CAS RN 55406-53-6) | 1.1.-31.12. | 400 tonnes | 0 % |
| 09.2874 | ex29242970 | 87 | Paracetamol (INN) (CAS RN 103-90-2) | 1.1.-31.12. | 20000 tonnes | 0 % |
| 09.2742 | ex29261000 | 10 | Acrylonitrile (CAS RN 107-13-1), for use in the manufacture of goods of chapter 55 and heading 6815note | 1.1.-31.12. | 60000 tonnes | 0 % |
| 09.2583 | ex29261000 | 30 | Acrylonitrile (CAS RN 107-13-1), for use in the manufacture of goods of headings 2921, 2924, 3903, 3906, 3908, 3911 and 4002note | 1.7.-31.12. | 20000 tonnes | 0 % |
| 09.2856 | ex29269070 | 84 | 2-Nitro-4(trifluoromethyl)benzonitrile (CAS RN 778-94-9) | 1.1.-31.12. | 900 tonnes | 0 % |
| 09.2708 | ex29280090 | 15 | Monomethylhydrazine (CAS RN 60-34-4) in the form of an aqueous solution with a content by weight of monomethylhydrazine of 40 (± 5) % | 1.1.-31.12. | 900 tonnes | 0 % |
| 09.2581 | ex29291000 | 25 | 1,5-Naphthylene diisocyanate (CAS RN 3173-72-6) with a purity by weight of 90 % or more | 1.1.-31.12. | 300 tonnes | 0 % |
| 09.2685 | ex29299000 | 30 | Nitroguanidine (CAS RN 556-88-7) | 1.1.-31.12. | 6500 tonnes | 0 % |
| 09.2597 | ex29309098 | 94 | Bis[3-(triethoxysilyl)propyl]disulphide (CAS RN 56706-10-6) | 1.1.-31.12. | 6000 tonnes | 0 % |
| 09.2596 | ex29309098 | 96 | 2-Chloro-4-(methylsulphonyl)-3-((2,2,2-trifluoroethoxy)methyl) benzoic acid (CAS RN 120100-77-8) | 1.1.-31.12. | 300 tonnes | 0 % |
| 09.2580 | ex29319000 | 75 | Hexadecyltrimethoxysilane (CAS RN 16415-12-6) with a purity by weight of at least 95 %, for use in the manufacture of polyethylenenote | 1.1.-31.12. | 165 tonnes | 0 % |
| 09.2842 | 29321200 | 2-Furaldehyde (furfuraldehyde) | 1.1.-31.12. | 10000 tonnes | 0 % | |
| 09.2696 | ex29322090 | 25 | Decan-5-olide (CAS RN 705-86-2) | 1.1.-31.12. | 6000 kilograms | 0 % |
| 09.2697 | ex29322090 | 30 | Dodecan-5-olide (CAS RN 713-95-1) | 1.1.-31.12. | 6000 kilograms | 0 % |
| 09.2812 | ex29322090 | 77 | Hexan-6-olide (CAS RN 502-44-3) | 1.1.-31.12. | 4000 tonnes | 0 % |
| 09.2858 | 29329300 | Piperonal (CAS RN 120-57-0) | 1.1.-31.12. | 220 tonnes | 0 % | |
| 09.2839 | ex29333999 | 09 | 2-(2-Pyridyl)ethanol (CAS RN 103-74-2) with a purity by weight of 99 % or more | 1.7.-31.12. | 350 tonnes | 0 % |
| 09.2673 | ex29333999 | 43 | 2,2,6,6-Tetramethylpiperidin-4-ol CAS RN 2403-88-5) | 1.1.-31.12. | 1000 tonnes | 0 % |
| 09.2880 | ex29335995 | 39 | Ibrutinib (INN) (CAS RN 936563-96-1) | 1.1.-31.12. | 5 tonnes | 0 % |
| 09.2860 | ex29336980 | 30 | 1,3,5-Tris[3-(dimethylamino)propyl]hexahydro-1,3,5-triazine (CAS RN 15875-13-5) | 1.1.-31.12. | 600 tonnes | 0 % |
| 09.2566 | ex29339980 | 05 | 1,4,7,10-Tetraazacyclododecane (CAS RN 294-90-6) with a purity by weight of 96 % or more | 1.1.-31.12. | 60 tonnes | 0 % |
| 09.2658 | ex29339980 | 73 | 5-(Acetoacetylamino)benzimidazolone (CAS RN 26576-46-5) | 1.1.-31.12. | 400 tonnes | 0 % |
| 09.2593 | ex29349990 | 67 | 5-Chlorothiophene-2-carboxylic acid (CAS RN 24065-33-6) | 1.1.-31.12. | 45000 kilograms | 0 % |
| 09.2675 | ex29359090 | 79 | 4-[[(2-Methoxybenzoyl)amino]sulfonyl]benzoyl chloride (CAS RN 816431-72-8) | 1.1.-31.12. | 1000 tonnes | 0 % |
| 09.2710 | ex29359090 | 91 | 2,4,4-Trimethylpentan-2-aminium (3R,5S,6E)-7-{2-[(ethylsulfonyl)amino]- 4-(4-fluorophenyl)-6-(propan-2-yl)pyrimidin-5-yl}-3,5-dihydroxyhept-6- enoate (CAS RN 917805-85-7) | 1.1.-31.12. | 5000 kilograms | 0 % |
| 09.2945 | ex29400000 | 20 | D-Xylose (CAS RN 58-86-6) | 1.1.-31.12. | 400 tonnes | 0 % |
| 09.2686 | ex32041100 | 75 | Colourant C.I. Disperse Yellow 54 (CAS RN 7576-65-0) and preparations based thereon with a colourant C.I. Disperse Yellow 54 content of 99 % or more by weight | 1.1.-31.12. | 250 tonnes | 0 % |
| 09.2676 | ex32041700 | 14 | Preparations based on Colourant C.I. Pigment Red 48:2 (CAS RN 7023-61-2) with a content thereof of 60 % or more but less than 85 % by weight | 1.1.-31.12. | 50 tonnes | 0 % |
| 09.2698 | ex32041700 | 30 | Colourant C.I. Pigment Red 4 (CAS RN 2814-77-9) and preparations based thereon with a colourant C.I. Pigment Red 4 content of 60 % or more by weight | 1.1.-31.12. | 150 tonnes | 0 % |
| 09.2659 | ex38029000 | 19 | Soda flux calcinated diatomaceous earth | 1.1.-31.12. | 35000 tonnes | 0 % |
| 09.2908 | ex38040000 | 10 | Sodium lignosulphonate (CAS RN 8061-51-6) | 1.1.-31.12. | 40000 tonnes | 0 % |
| 09.2889 | 38051090 | Sulphate turpentine | 1.1.-31.12. | 25000 tonnes | 0 % | |
| 09.2935 | ex38061000 | 10 | Rosin and resin acids obtained from fresh oleoresins | 1.1.-31.12. | 280000 tonnes | 0 % |
| 09.2832 | ex38089290 | 40 | Preparation containing 38 % or more but not more than 50 % by weight of pyrithione zinc (INN) (CAS RN 13463-41-7) in an aqueous dispersion | 1.1.-31.12. | 500 tonnes | 0 % |
| 09.2876 | ex38112900 | 57 | Additives consisting of reaction products of diphenylamine and branched nonenes with:more than 20 % but not more than 50 % by weight 4-monononyldiphenylamine, andmore than 50 % but not more than 80 % by weight 4,4'-dinonyldiphenylamine,a total percentage of 2,4-dinonyldiphenylamine and 2,4'-dinonyldiphenylamine of not more than 15 % by weight,used for the manufacture of lubricating oilsnote | 1.1.-31.12. | 900 tonnes | 0 % |
| 09.2814 | ex38159090 | 76 | Catalyst consisting of titanium dioxide and tungsten trioxide | 1.1.-31.12. | 3000 tonnes | 0 % |
| 09.2644 | ex38249992 | 77 | Preparation containing by weight:55 % or more but not more than 78 % of dimethyl gluterate (CAS RN 1119-40-0),10 % or more but not more than 30 % of dimethyl adipate (CAS RN 627-93-0), andnot more than 35 % of dimethyl succinate (CAS RN 106-65-0) | 1.1.-31.12. | 10000 tonnes | 0 % |
| 09.2681 | ex38249992 | 85 | Mixture of bis [3-(triethoxysilyl)propyl]sulphides (CAS RN 211519-85-6) | 1.1.-31.12. | 9000 tonnes | 0 % |
| 09.2650 | ex38249992 | 87 | Acetophenone (CAS RN 98-86-2), with a purity by weight of 60 % or more but not more than 90 % | 1.1.-31.12. | 2000 tonnes | 0 % |
| 09.2829 | ex38249993 | 43 | Solid extract of the residual, insoluble in aliphatic solvents, obtained during the extraction of rosin from wood, having the following characteristics:a resin acid content not exceeding 30 % by weight,an acid number not exceeding 110, anda melting point of 100° C or more | 1.1.-31.12. | 1600 tonnes | 0 % |
| 09.2907 | ex38249993 | 67 | Mixture of phytosterols, in the form of powder, containing by weight:75 % or more of sterols,not more than 25 % of stanols,for use in the manufacture of stanols/sterols or stanol/sterol estersnote | 1.1.-31.12. | 2500 tonnes | 0 % |
| 09.2568 | ex38249996 | 91 | Mixture, in pellet form, containing by weight:49 % or more but not more than 50 % of bis[3-(triethoxysilyl)propyl] polysulphides (CAS RN 211519-85-6), and50 % or more but not more than 51 % of carbon black (CAS RN 1333-86-4),of which 75 % by weight or more pass through a sieve with an aperture of 0,60 mm, but not more than 10 % pass through a sieve with an aperture of 0,25 mm (as determined by the ASTM D1511 method) | 1.1.-31.12. | 1500 tonnes | 0 % |
| 09.2820 | ex38279000 | 10 | Mixtures containing by weight:60 % or more but not more than 90 % of 2-chloropropene (CAS RN 557-98-2),8 % or more but not more than 14 % of (Z)-1-chloropropene (CAS RN 16136-84-8),5 % or more but not more than 23 % of 2-chloropropane (CAS RN 75-29-6),not more than 6 % of 3-chloropropene (CAS RN 107-05-1), andnot more than 1 % of ethyl chloride (CAS RN 75-00-3) | 1.1.-31.12. | 6000 tonnes | 0 % |
| 09.2671 | ex39059990 | 81 | Poly(vinyl butyral)(CAS RN 63148-65-2):containing by weight 17,5 % or more, but not more than 20 % of hydroxyl groups, andwith a median particle size (D50) of more than 0,6 mm | 1.1.-31.12. | 12500 tonnes | 0 % |
| 09.2846 | ex39074000 | 25 | Polymer blend of polycarbonate and poly(methyl methacrylate) with a polycarbonate content of not less than 98,5 % by weight, in the form of pellets or granules, with a luminous transmittance of not less than 88,5 %, measured using a test sample with a thickness of 4 mm at a wavelength of λ = 400 nm (according to ISO 13468-2) | 1.1.-31.12. | 2000 tonnes | 0 % |
| 09.2585 | ex39079980 | 70 | Copolymer of poly(ethylene terephthalate) and cyclohexane dimethanol, containing more than 10 % by weight of cyclohexane dimethanol | 1.1.-31.12. | 60000 tonnes | 2 % |
| 09.2855 | ex39100000 | 10 | Liquid poly(methylhydrosiloxane) with terminal trimethylsilyl groups (CAS RN 63148-57-2) with a purity by weight of 99,9 % or more | 1.7.-31.12. | 250 tonnes | 0 % |
| 09.2723 | ex39119019 | 10 | Poly(oxy-1,4-phenylenesulphonyl-1,4-phenyleneoxy-4,4’-biphenylene) | 1.1.-31.12. | 5000 tonnes | 0 % |
| 09.2816 | ex39121100 | 20 | Cellulose acetate flakes | 1.1.-31.12. | 75000 tonnes | 0 % |
| 09.2573 | ex39131000 | 20 | Sodium alginate extracted from brown seaweed (CAS RN 9005-38-3), witha loss on drying of not more than 15 % by weight (4 h at 105 °C),a water-insoluble fraction of not more than 2 % by weight, calculated on the dry weight | 1.1.-31.12. | 2000 tonnes | 0 % |
| 09.2641 | ex39139000 | 87 | Sodium hyaluronate, non sterile, with:a weight average molecular weight (Mw) of not more than 900000,an endotoxin level of not more than 0,008 Endotoxin units (EU)/mg,an ethanol content of not more than 1 % by weight,an isopropanol content of not more than 0,5 % by weight | 1.1.-31.12. | 300 kilograms | 0 % |
| 09.2661 | ex39205100 | 50 | Sheets of polymethylmethacrylate conforming to standards:EN 4364 (MIL-P-5425E) and DTD5592A, orEN 4365 (MIL-P-8184) and DTD5592A | 1.1.-31.12. | 100 tonnes | 0 % |
| 09.2645 | ex39211400 | 20 | Cellular block of regenerated cellulose, impregnated with water containing magnesium chloride and quaternary ammonium compounds, measuring 100 cm (± 10 cm) × 100 cm (± 10 cm) × 40 cm (± 5 cm) | 1.1.-31.12. | 1700 tonnes | 0 % |
| 09.2572 | ex52052600ex52052700 | 1010 | Raw white single cotton yarnof combed fibres,with an average fibre length of 36,5 mm or more,produced through the compact ring spinning process with pneumatic compression,with a tear strength of 26,5 cN/tex or more (according to ISO 2062:2009, at a speed of 5000 mm/min) | 1.1.-31.12. | 50000 tonnes | 0 % |
| 09.2576 | ex52081216 | 20 | Unbleached woven fabric in plain weave, with:a width of not more than 145 cm,a weight of 120 g/m2 or more, but not more than 130 g/m2,30 or more, but not more than 45 wefts per cm,a tuck-in selvedge on both sides,where from the inside out, the 15 mm (± 2 mm) wide tuck-in selvedge consists of a 6 mm or more but not more than 9 mm wide strip of plain weave and a 6 mm or more but not more than 9 mm wide strip of panama weave | 1.1.-31.12. | 1500000 square metres | 0 % |
| 09.2577 | ex52081296 | 20 | Unbleached woven fabric in plain weave, with:a width of not more than 145 cm,a weight of more than 130 g/m2, but not more than 145 g/m230 or more, but not more than 45 wefts per cm,a tuck-in selvedge on both sides,where from the inside out, the 15 mm (± 2 mm wide) tuck-in selvedge consists of a 6 mm or more but not more than 9 mm wide strip of plain weave and a 6 mm or more but not more than 9 mm wide strip of panama weave | 1.1.-31.12. | 2300000 square metres | 0 % |
| 09.2848 | ex55051010 | 10 | Waste of synthetic fibres (including noils, yarn waste, and garnetted stock) of nylon or other polyamides (PA6 and PA66) | 1.1.-31.12. | 10000 tonnes | 0 % |
| 09.2721 | ex59069990 | 20 | Woven and laminated rubberised textile fabric with the following characteristics:with three layers,one outer layer consists of acrylic fabric,the other outer layer consists of polyester fabric,the middle layer consists of chlorobutyl rubber,the middle layer has a weight of 452 g/m2 or more but not more than 569 g/m2,the textile fabric has a total weight of 952 g/m2 or more but not more than 1159 g/m2, andthe textile fabric has a total thickness of 0,8 mm or more but not more than 4 mm,used for the manufacture of the retractable roof of motor vehiclesnote | 1.1.-31.12. | 375000 square metres | 0 % |
| 09.2866 | ex70191200ex70191200 | 0626 | S glass stratifils (rovings):composed of continuous glass filaments of 9 μm (± 0,5 μm),measuring 200 tex or more but not more than 680 tex,not containing any calcium oxide, andwith a breaking strength of more than 3550 MPa determined by ASTM D2343-09,for use in the manufacture of aeronauticsnote | 1.1.-31.12. | 1000 tonnes | 0 % |
| 09.2628 | ex70196600 | 10 | Glass web woven from glass fibre coated in plastic, of a weight of 120 g/m2(± 10 g/m2), of a type used in rolling insect screens with fixed frames | 1.1.-31.12. | 3000000 square meters | 0 % |
| 09.2799 | ex72024990 | 10 | Ferro-chromium containing 1,5 % or more but not more than 4 % by weight of carbon and not more than 70 % of chromium | 1.1.-31.12. | 50000 tonnes | 0 % |
| 09.2652 | ex74091100ex74101100 | 3040 | Refined copper foil and strips, electrolytically manufactured, with a thickness of 0,015 mm or more | 1.1.-31.12. | 1020 tonnes | 0 % |
| 09.2734 | ex74091900 | 20 | Plates or sheets consisting of:a layer of a silicon nitride ceramic with a thickness of 0,32 mm (± 0,1 mm) or more but not more than 1,0 mm (± 0,1 mm),covered on both sides with a foil of refined copper with a thickness of 0,8 mm (± 0,1 mm), andon one side partially covered with a coating of silver | 1.1.-31.12. | 7000000 pieces | 0 % |
| 09.2662 | ex74102100 | 55 | Plates:consisting of at least one layer of fibreglass fabric impregnated with epoxide resin,covered on one or both sides with copper foil with a thickness of not more than 0,15 mm,with a dielectric constant (DK) of less than 5,4 at 1 MHz, as measured according to IPC-TM-650 2.5.5.2,with a loss tangent of less than 0,035 at 1 MHz, as measured according to IPC-TM-650 2.5.5.2,with a comparative tracking index (CTI) of 600 or more | 1.1.-31.12. | 80000 square metres | 0 % |
| 09.2835 | ex76042910 | 30 | Aluminium alloy rods with a diameter of 300,1 mm or more, but not more than 533,4 mm | 1.1.-31.12. | 1000 tonnes | 0 % |
| 09.2736 | ex76071190ex76071190ex76071190ex76071190 | 75777879 | Aluminium and magnesium alloy strip or foil:of an alloy conforming to standards 5182-H19 or 5052-H19,in rolls with an outside diameter of minimum 1250 mm but not more than 1350 mm,of a thickness (tolerance - 0,006 mm) of 0,15 mm, 0,16 mm, 0,18 mm or 0,20 mm,of a width ( tolerance ± 0,3 mm) of 12,5 mm, 15,0 mm, 16,0 mm, 25,0 mm, 35,0 mm, 50,0 mm or 356 mm,having a camber tolerance of not more than 0,4 mm/750 mm,of a flatness measurement: I-unit ± 4,having a tensile strength of more than (5182-H19) 365 MPa or (5052-H19) 320 MPa, andof an elongation A50 of more than (5182-H19) 3 % or (5052-H19) 2,5 %,for use in the manufacture of slats for blindsnote | 1.1.-31.12. | 600 tonnes | 0 % |
| 09.2722 | 81041100 | Unwrought magnesium, containing at least 99,8 % by weight of magnesium | 1.1.-31.12. | 120000 tonnes | 0 % | |
| 09.2840 | ex81043000 | 20 | Magnesium powder:of purity by weight of 98 % or more, but not more than 99,5 %, andwith a particle size of 0,2 mm or more but not more than 0,8 mm | 1.1.-31.12. | 2000 tonnes | 0 % |
| 09.2629 | ex83024900 | 91 | Aluminium telescopic handle for use in the manufacture of luggagenote | 1.1.-31.12. | 1500000 pieces | 0 % |
| 09.2720 | ex84139100 | 50 | Pump head for two cylinder high pressure pump made of forged steel, with:milled threaded fittings with a diameter of 10 mm or more but not more than 36,8 mm, anddrilled fuel channels with a diameter of 3,5 mm or more but not more than 10 mm,of a kind used in diesel injection systems | 1.1.-31.12. | 65000 pieces | 0 % |
| 09.2569 | ex84149000 | 80 | Turbocharger wheel housing of cast aluminium alloy or cast iron:with a heat resistance up to 400 °C,with a hole of 30 mm or more but not more than 300 mm for the insertion of the compressor wheel,for use in the automotive industrynote | 1.1.-31.12. | 4000000 pieces | 0 % |
| 09.2570 | ex84829190 | 10 | Rollers with a logarithmic profile and a diameter of 25 mm or more but not more than 70 mm or balls with a diameter of 30 mm but not more than 100 mm,made of 100Cr6 steel or 100CrMnSi6-4 steel (ISO 3290),with a deviation of 0,5 mm or less as determined with the FBHmethodfor use in wind turbine industrynote | 1.1.-31.12. | 600000 pieces | 0 % |
| 09.2738 | ex84829900 | 30 | Brass cages with the following characteristics:continuously or centrifugally cast,turned,containing by weight 35 % or more, but not more than 38 % of zinc,containing by weight 0,75 % or more, but not more than 1,25 % of lead,containing by weight 1,0 % or more, but not more than 1,4 % of aluminium, andwith a tensile strength of 415 Pa or more,of a kind used for the manufacture of ball bearings | 1.1.-31.12. | 50000 pieces | 0 % |
| 09.2857 | ex84829900 | 50 | Inner and outer rings made of steel, not grinded, outer ring with an internal raceway, inner ring with an external raceway, with external diameters of:14 mm or more but not more than 77 mm for the inner ring, and26 mm or more but not more than 101 mm for the outer ring | 1.7.-31.12. | 10000000 kilograms | 0 % |
| 09.2763 | ex85014020ex85014080 | 4030 | Electric AC commutator motor, single-phase, with an output of 250 W or more, an input power of 700 W or more but not more than 2700 W, an external diameter of more than 120 mm (± 0,2 mm) but not more than 135 mm (± 0,2 mm), a rated speed of more than 30000 rpm but not more than 50000 rpm, equipped with air-inducting ventilator, for use in the manufacture of vacuum cleanersnote | 1.1.-31.12. | 2000000 pieces | 0 % |
| 09.2672 | ex85299092ex94054231 | 7570 | Printed circuit board with LED diodes:whether or not equipped with prisms/lens, andwhether or not fitted with connector(s)for the manufacture of backlight units for goods of heading 8528note | 1.1.-31.12. | 115000000 pieces | 0 % |
| 09.2574 | ex85371091 | 73 | Multifunctional device (instrument cluster) with:curved TFT LCD display (radius 750 mm) with touch-sensitive surfaces,microprocessors and memory chips,acoustic module and loudspeaker,connections for CAN, 3 x LIN bus, LVDS and Ethernet,for operating various functions (e.g. chassis, lighting) andfor situation-related display of vehicle and navigation data (e.g. speed, odometer, charge level of the drive battery),for use in the manufacture of passenger cars powered solely by an electric motor covered by HS subheading 870380note | 1.1.-31.12. | 66900 pieces | 0 % |
| 09.2003 | ex85437090 | 63 | Voltage controlled frequency generator, consisting of active and passive elements mounted on a printed circuit, contained in a housing with dimensions of not more than 30 mm × 30 mm | 1.1.-31.12. | 1400000 pieces | 0 % |
| 09.2910 | ex87089997 | 75 | Aluminium alloy support bracket, with mounting holes, whether or not with fixation nuts, for indirect connection of the gearbox to the car body for use in the manufacture of goods of Chapter 87note | 1.1.-31.12. | 200000 pieces | 0 % |
| 09.2694 | ex87141090 | 30 | Axle clamps, housings, fork bridges and clamping pieces, of aluminium alloy of a kind used for motor bikes | 1.1.-31.12. | 1000000 pieces | 0 % |
| 09.2668 | ex87149110ex87149110ex87149110 | 213175 | Bicycle frame, constructed from carbon fibres and artificial resin, for use in the manufacture of bicycles (including electric bicycles)note | 1.1.-31.12. | 600000 pieces | 0 % |
| 09.2564 | ex87149110ex87149110ex87149110 | 253577 | Frame, constructed from aluminium or aluminium and carbon fibres and artificial resin, for the use in the manufacture of bicycles (including electric bicycles)note | 1.1.-31.12. | 9600000 pieces | 0 % |
| 09.2579 | ex90292031ex90299000 | 4040 | Clustered instrument panel with:stepping motors,analog pointers and dials,or without microprocessor control board,or without LED indicators or LCD display,showing at least:speed,engine revolutions,engine temperature,the fuel level,communicating via CAN-BUS and/or K-LINE protocols,for use in the manufacture of goods of Chapter 87note | 1.1.-31.12. | 160000 pieces | 0 % |
Source: EUR-Lex, © European Union, 1998-2026. Reuse authorised under Decision 2011/833/EU.