Chapter VI, Article 24 · Commission Regulation (EU) 2022/1616

Contents

Article 24Union register of technologies, recyclers, recycling processes, recycling schemes, and decontamination installations#

1.A public Union register of novel technologies, recyclers, recycling processes, recycling schemes and decontamination installations (‘the Register’) is established.

2.The Register shall contain:

(a)the names of novel technologies and the names and addresses of the developers, and the URL referred to in Article 10(2);

(b)the names of authorised recycling processes and the names and addresses of the authorisation holders, and on which technology each process is based;

(c)the authorisation status of each registered recycling process, including whether its authorisation is suspended, revoked, or subject to transitional provisions, and the latest date of change of the authorisation status;

(d)the company name and the address of the head office of recyclers operating a decontamination installation;

(e)the addresses of recycling facilities;

(f)decontamination installations, the technology they use, the facility at which they are located, and the authorised process they apply, if any;

(g)the registration status of decontamination installations, including whether the status is newly registered, being established, active or suspended, and the latest date of change of that status;

(h)names of recycling schemes, and names and addresses of the entity managing the scheme;

(i)the markings required in accordance with Article 9(5);

(j)where relevant, the information required in accordance with Article 19(2);

(k)cross-references between technologies, processes, schemes, recyclers, and installations and schemes;

3.The Register shall maintain the above information in tables. It shall assign the following entities with unique numbers, as follows:

—authorised recycling processes are assigned a recycling authorisation number (‘RAN’);

—recyclers are assigned a recycler operator number (‘RON’);

—decontamination installations are assigned a recycling installation number (‘RIN’);

—recycling schemes are assigned a recycling scheme number (‘RSN’);

—recycling facilities are assigned a recycling facility number (‘RFN’);

—novel recycling technologies are assigned a novel technology number (‘NTN’).

4.The Register shall be made available to the public.

Source: EUR-Lex, © European Union, 1998-2026. Reuse authorised under Decision 2011/833/EU.

Key facts

Type

Regulation · Commission Regulation (EU) 2022/1616 · EEA relevant

Adopted

15 Sept 2022

In force

10 Oct 2022

Applies from

10 Oct 2024

Text current to

3 Dec 2025

Made by

Directorate-General for Health and Food Safety, European Commission

Official

EUR-Lex 32022R1616 · ELI

Defined terms · 24

Show every defined term

batch
means a quantity of material of the same quality, and produced using uniform production parameters at a certain manufacturing stage, stored and contained to exclude mixing with other materials, or contamination, and designated as such by a single production number.
converter
means any natural or legal person that carries out one or more post-processing unit operations;
decontamination installation
means specific equipment operating a decontamination process;
decontamination process
means a specific sequence of unit operations which together have as primary purpose to remove contamination from plastic input in order to make it suitable for contact with food, using a specific decontamination technology;
decontamination technology
means a specific combination of physical or chemical concepts, principles, and practices part of a recycling technology which have as primary purpose to remove contamination or to purify;
food-grade
means plastic that was as primary material compliant with Regulation (EU) No 10/2011;
incidental contamination
means contamination present in plastic input originating from food, from plastic materials and articles intended and used for contact with food, from their use or misuse for non-food purposes, and from the unintentional presence of other substances, materials and articles due to waste management;
manufacturing stage
means one or more sequential unit operations and which are followed by a quality assessment of the material resulting from that stage;
Non-food %
(% w/w) means the maximum amount of non-food PCW present in the input;
Non-food PCW
means packaging that was not used to package food and may not have been manufactured in full compliance with Regulation (EU) No 10/2011 and other post-consumer plastic materials which were not intended for contact with food;
plastic input
means the plastic materials resulting from pre-processing which are entered into a decontamination process;
post-consumer waste
means plastic waste collected in accordance with Article 6;
post-processing
means all unit operations subsequent to the decontamination process by which its output is further polymerised, otherwise treated, and/or converted, resulting in recycled plastic materials and articles in their finished state;
pre-processing
means all waste management operations carried out to sort, shred, wash, mix or otherwise treat plastic waste in order to make it suitable for the decontamination process;
recycled content
refers to the amount of recycled plastic directly resulting from the decontamination process of a recycling process contained either in further post-processed recycled plastic or recycled plastic materials and articles manufactured therefrom.
recycled plastic
means plastic resulting from the decontamination process of a recycling process and plastic resulting from subsequent post-processing operations and that is not yet transformed into recycled plastic materials and articles;
recycled plastic materials and articles
means food contact materials and articles in their finished state, and that are made either fully or partly of recycled plastic;
recycler
means any natural or legal person who applies a decontamination process;
recycling facility
means a location where at least one decontamination installation is located;
recycling installation
means the equipment operating at least a part of a recycling process;
recycling process
means a sequence of unit operations that is intended to manufacture recycled plastic materials and articles through pre-processing, a decontamination process, and post-processing, and which is based on a specific recycling technology;
recycling scheme
means an arrangement between legal entities to manage the use, separate collection and recycling of plastic materials and articles with the objective to limit or prevent their contamination in order to facilitate their recycling;
recycling technology
means a specific combination of physical or chemical concepts, principles, and practices to recycle a waste stream of a certain type and collected in a certain way into recycled plastic materials and articles of a specific type and with a specific intended use, and includes a decontamination technology;
unit operation
means a basic operation that is part of a process, and applies a single transformation to its input, or more transformations if they occur in conjunction;