Commission Regulation (EU) 2022/1616

means a quantity of material of the same quality, and produced using uniform production parameters at a certain manufacturing stage, stored and contained to exclude mixing with other materials, or contamination, and designated as such by a single production number.

means any natural or legal person that carries out one or more post-processing unit operations;

means specific equipment operating a decontamination process;

means a specific sequence of unit operations which together have as primary purpose to remove contamination from plastic input in order to make it suitable for contact with food, using a specific decontamination technology;

means a specific combination of physical or chemical concepts, principles, and practices part of a recycling technology which have as primary purpose to remove contamination or to purify;

means plastic that was as primary material compliant with Regulation (EU) No 10/2011;

means contamination present in plastic input originating from food, from plastic materials and articles intended and used for contact with food, from their use or misuse for non-food purposes, and from the unintentional presence of other substances, materials and articles due to waste management;

means one or more sequential unit operations and which are followed by a quality assessment of the material resulting from that stage;

(% w/w) means the maximum amount of non-food PCW present in the input;

means packaging that was not used to package food and may not have been manufactured in full compliance with Regulation (EU) No 10/2011 and other post-consumer plastic materials which were not intended for contact with food;

means the plastic materials resulting from pre-processing which are entered into a decontamination process;

means plastic waste collected in accordance with Article 6;

means all unit operations subsequent to the decontamination process by which its output is further polymerised, otherwise treated, and/or converted, resulting in recycled plastic materials and articles in their finished state;

means all waste management operations carried out to sort, shred, wash, mix or otherwise treat plastic waste in order to make it suitable for the decontamination process;

refers to the amount of recycled plastic directly resulting from the decontamination process of a recycling process contained either in further post-processed recycled plastic or recycled plastic materials and articles manufactured therefrom.

means plastic resulting from the decontamination process of a recycling process and plastic resulting from subsequent post-processing operations and that is not yet transformed into recycled plastic materials and articles;

means food contact materials and articles in their finished state, and that are made either fully or partly of recycled plastic;

means any natural or legal person who applies a decontamination process;

means a location where at least one decontamination installation is located;

means the equipment operating at least a part of a recycling process;

means a sequence of unit operations that is intended to manufacture recycled plastic materials and articles through pre-processing, a decontamination process, and post-processing, and which is based on a specific recycling technology;

means an arrangement between legal entities to manage the use, separate collection and recycling of plastic materials and articles with the objective to limit or prevent their contamination in order to facilitate their recycling;

means a specific combination of physical or chemical concepts, principles, and practices to recycle a waste stream of a certain type and collected in a certain way into recycled plastic materials and articles of a specific type and with a specific intended use, and includes a decontamination technology;

means a basic operation that is part of a process, and applies a single transformation to its input, or more transformations if they occur in conjunction;