Contents
- 1. The single lifetime identification document shall have one…
- 2. The single lifetime identification document shall only be…
- 3. The shape of the silhouette of the equine animal in the ou…
- 4. The competent authority may authorise that in the case of…
- 5. The outline of chestnuts in Section X of the model identif…
- 6. The anatomic place of implantation of an injectable transp…
Article 17Minimum requirements as regards the format, design and content of single lifetime identification documents#
1.The single lifetime identification document shall have one of the following formats:
(a)standard format (standard identification document) sufficient to contain the minimum information for the identification of equine animals required in accordance with Regulations (EU) 2016/429 and (EU) 2019/6 and comprising Sections I, II and III of the model identification document for equine animals set out in Part 1 of Annex II to this Regulation and meeting the additional requirements set out in Part 2 of that Annex;
(b)extended format (extended identification document) sufficient to contain the minimum information for the identification of equine animals required in accordance with Regulations (EU) 2016/429, (EU) 2019/6 and (EU) 2016/1012, as well as in accordance with Article 65(2)(d) of Delegated Regulation (EU) 2019/2035, and comprising Sections I to X of the model identification document for equine animals set out in Part 1 of Annex II to this Regulation and meeting the additional requirements set out in Part 2 of that Annex.
2.The single lifetime identification document shall only be issued after entering at least the information required in accordance with points 1, 2 and 4 to 7 of Part A and points 12 to 18 of Part B and, where applicable in accordance with Article 16, Section X of the model identification document for equine animals set out in Part 1 of Annex II.
3.The shape of the silhouette of the equine animal in the outline diagram provided for in Part B of Section I of the model identification document for equine animals set out in Part 1 of Annex II may be adapted, if the document is issued for an equine animal other than a horse.
4.The competent authority may authorise that in the case of a standard identification document, the following information is only to be completed when the equine animal has been excluded from slaughter for human consumption in accordance with Article 39(2):
(a)points (3)(a) to (h) of Part A of Section I of the model identification document for equine animals set out in Part 1 of Annex II;
(b)points 12 to 18 of Part B of Section I of the model identification document for equine animals set out in Part 1 of Annex II.
5.The outline of chestnuts in Section X of the model identification document for equine animals set out in Part 1 of Annex II shall only be required in single lifetime identification documents issued for equine animals not identified with an injectable transponder or ear tag and which have no markings or only three or less whorls.
6.The anatomic place of implantation of an injectable transponder shall be indicated in the outline diagram provided for in Part B of Section I of the model identification document for equine animals set out in Part 1 of Annex II.
Source: EUR-Lex, © European Union, 1998-2026. Reuse authorised under Decision 2011/833/EU.