Commission Delegated Regulation (EU) 2021/1445

Contents

THE EUROPEAN COMMISSION,Having regard to the Treaty on the Functioning of the European Union,Having regard to Regulation (EU) 2018/858 of the European Parliament and of the Council of 30 May 2018 on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles, amending Regulations (EC) No 715/2007 and (EC) No 595/2009 and repealing Directive 2007/46/EC^note and in particular Articles 5(3) and 72(3) thereof,Whereas:

(1)In order to take into account technological and regulatory developments, it is necessary to introduce and update references to the regulatory acts listed in Annex II to Regulation (EU) 2018/858 that contain the requirements with which vehicles, systems, components and separate technical units have to comply.

(2)In order to take into account technical and regulatory developments, it is necessary to update the list of regulatory acts laid down in Annex VII to Regulation (EU) 2018/858 for which a manufacturer may be designated as a technical service and the specific conditions under which self-testing designation are to be used.

(3)Annexes II and VII to Regulation (EU) 2018/858 should therefore be amended in accordance with the Annex to this Regulation,

HAS ADOPTED THIS REGULATION:

Article 1 #

Annexes II and VII to Regulation (EU) 2018/858 are amended in accordance with the Annex to this Regulation.

Article 2Entry into force#

This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.

Amendments to Annexes II and VII to Regulation (EU) 2018/858

(1)in Annex II, Part I, the table is amended as follows:

(a)the following entry is inserted before the entry for item 1A:1 | Permissible sound level | Directive 70/157/EEC | X | X | X | X | X | X | | | | | X

(b)the entry for item 41A is replaced by the following:41A | Emissions (Euro VI) heavy duty vehicles | Regulation (EC) No 595/2009Regulation (EU) No 582/2011 | X(9) | X(9) | X | X(9) | X(9) | X | | | | | X

(d)the following explanatory note 16 is added:‘(¹⁶)For vehicles with a technically permissible maximum laden mass exceeding 7500 kg’.;

(2)in Annex II, Part I, Appendix 1, Table 1 is amended as follows:

(a)the following entry is inserted before the entry for item 1A:1 | Permissible sound level | Directive 70/157/EEC | | A

(b)explanatory note C is replaced by the following:‘CApplication of the regulatory act as follows:

(a)only the technical requirements from the regulatory shall be fulfilled;

(b)no type-approval certificate shall be required;

(c)tests and checks shall be conducted by the technical service or by the manufacturer (see decisions for letter “B”);

(d)a test report shall be drafted in accordance with Annex III;

(e)COP shall be ensured.’;

(3)in Annex II, Part I, Appendix 1, Table 2, the following entry is inserted before the entry for item 1A:1 | Permissible sound level | Directive 70/157/EEC | | A

(4)in Annex II, Part I, Appendix 2, point 4., the table below the title Part I: (Vehicles belonging to category M₁), the entry for item 16A is replaced by the following:‘16AUN Regulation No 26 (Exterior projections)

(a)The external surface of the bodywork shall comply with the general requirements included in paragraph 5 of UN Regulation No 26.

(b)At the discretion of the technical service the provisions referred to in paragraphs 6.1, 6.5, 6.6, 6.7, 6.8 and 6.11 of UN Regulation No 26 shall be checked.’

(5)Annex II, Part II is amended as follows:

(a)the first paragraph below the title is replaced by the following:‘Where reference is made to a separate Directive or Regulation in the table of Part I, a type-approval issued under the following UN regulations, or a Universal International Whole Vehicle Type Approval issued under UN Regulation No 0^note that includes type-approval of the relevant item under the following UN Regulations, to which the Union has acceded as a Contracting Party to the United Nations Economic Commission for Europe “Revised 1958 Agreement” by virtue of Council Decision 97/836/EC^note, or subsequent Council decisions as referred to in Article 3(3) of that Decision, shall be considered equivalent to an EU type-approval granted under the relevant separate Directive or Regulation.

(b)the table is replaced by the following:| Subject | UN regulations | Series of amendments1 | Permissible sound level | 5159 | 02011a | Permissible sound level (not covering AVAS and replacement silencers) | 51 | 03Acoustic Vehicle Alerting System (AVAS) | 138 | 01Replacement silencing systems | 59 | 0258 | Pedestrian protection (not covering brake assist and frontal protection systems) | 127 | 00| Brake assist system | 139 | 0059 | Recyclability | 133 | 0062 | Hydrogen storage systems | 134 | 0065 | Advanced emergency braking systems | 131 | 0166 | Lane departure warning system | 130 | 00

(6)Annex II, Part III is amended as follows:

(b)item 15A of Appendix 1 is replaced by the following:15A | Seats, their anchorages and any head restraints | Regulation (EC) No 661/2009UN Regulation No 17 | D | G (18) + D | G + D (4B) | G + D (4B)

(c)Additional requirements for ambulances is replaced by the following:‘Additional requirements for ambulancesThe patient compartment of ambulances shall comply with the requirements of EN 1789:2007 +A1:2010 +A2:2014 on Medical vehicles and their equipment – Road ambulances with the exception of Section 6.5, list of equipment. Proof of compliance shall be provided with a test report of the technical service and may be based on an assessment carried out by subcontractors or subsidiaries of the technical service in accordance with the provisions of Article 71. If a wheelchair space is foreseen, the requirements of Appendix 3 relating to the wheelchair tie-down and occupant restraint systems shall apply.’;

(d)item 12A of Appendix 3 is replaced by the following:12A | Interior fittings | Regulation (EC) No 661/2009UN Regulation No 21 | G (18) + C

(e)item 15A of Appendix 3 is replaced by the following:15A | Seats, their anchorages and any head restraints | Regulation (EC) No 661/2009UN Regulation No 17 | G (18) + W3

(f)the Explanatory Notes are amended as follows:

(i)explanatory note 1 is replaced by the following:‘(¹)For vehicles with a reference mass not exceeding 2610 kg. At the manufacturer’s request, Regulation (EC) No 715/2007 may apply to vehicles with a reference mass not exceeding 2840 kg or if the vehicle is a special purpose vehicle with the code SB relating to armoured vehicles also with a reference mass exceeding 2840 kg. With regard to access to information, for other parts (e.g. living compartment) than the base vehicle, it is sufficient that the manufacturer provides access to vehicle repair and maintenance information in a readily accessible and prompt manner.’;

(ii)explanatory note 18 is added:‘(¹⁸)Note G may be applied to those fittings in the interior of the vehicle that are not significantly affected by the modification, however, any added or modified fittings in the interior shall comply with the requirements as applicable for vehicle category M₁.’;

(7)in Annex VII, point 3., the following row is inserted after the entry for item 46A:46B | Rolling resistance determination | Regulation (EU) 2017/2400, Annex X

Regulation (EU) 2018/858 is amended as follows:

Article 1#

Article 2Entry into force#

Amendments to Annexes II and VII to Regulation (EU) 2018/858

Article 1 #