(2)Allura red AC was authorised without a time limit in accordance with Directive 70/524/EEC as a feed additive for dogs and cats belonging to the group ‘colourants, including pigments’ under the heading ‘colouring agents authorised for colouring foodstuffs by Community rules’. The additive was subsequently entered in the Register of feed additives as an existing product, in accordance with Article 10(1)(b) of Regulation (EC) No 1831/2003.
(3)In accordance with Article 10(2) of Regulation (EC) No 1831/2003 in conjunction with Article 7 thereof, an application was submitted for the re-evaluation of allura red AC as a feed additive for dogs and cats. The applicant requested the additive to be classified in the additive category ‘sensory additive’ and in the functional group ‘colourants’. The application was accompanied by the particulars and documents required under Article 7(3) of Regulation (EC) No 1831/2003.
(4)The European Food Safety Authority (‘the Authority’) concluded in its opinions of 24 April 2012note, 15 May 2013note and 20 October 2015note that, under the proposed conditions of use, allura red AC does not have an adverse effect on animal health or the environment. It also concluded that the substance should be considered potentially harmful for the user of the additive as a result of skin, eye, or inhalation exposure. Therefore, the Commission considers that appropriate protective measures should be taken to prevent adverse effects on human health, in particular as regards the users of the additive. In accordance with Commission Regulation (EC) No 429/2008note, phase I of the environmental risk assessment has determined that allura red AC, as an additive intended for non-food producing animals, is exempted from further assessment due to the unlikelihood of a significant environmental effect, there being no scientifically-based evidence for concern having been identified by the Authority in its above-mentioned opinions. The Authority further concluded that the additive concerned is effective in adding colour to feedingstuffs. The Authority does not consider that there is a need for specific requirements of post-market monitoring. It also verified the report on the method of analysis of the feed additive in feed submitted by the Reference Laboratory set up by Regulation (EC) No 1831/2003.
(5)The assessment of allura red AC shows that the conditions for authorisation, as provided for in Article 5 of Regulation (EC) No 1831/2003, are satisfied. Accordingly, the use of that additive should be authorised as specified in the Annex to this Regulation.
(6)Since safety reasons do not require the immediate application of the modifications to the conditions of authorisation of the substance concerned, it is appropriate to allow a transitional period for interested parties to prepare themselves to meet the new requirements resulting from the authorisation.
(7)The measures provided for in this Regulation are in accordance with the opinion of the Standing Committee on Plants, Animals, Food and Feed,
The substance specified in the Annex, belonging to the additive category ‘sensory additives’ and to the functional group ‘colourants’, is authorised as an additive in animal nutrition, subject to the conditions laid down in that Annex.
1.The substance specified in the Annex and premixtures containing that substance, which are produced and labelled before 5 September 2020 in accordance with the rules applicable before 5 March 2020 may continue to be placed on the market and used until the existing stocks are exhausted.
2.Feed materials and compound feed containing the substance specified in the Annex which are produced and labelled before 5 March 2022 in accordance with the rules applicable before 5 March 2020 may continue to be placed on the market and used until the existing stocks are exhausted.
This Regulation shall enter into force on the twentieth day following that of its publication in the Official Journal of the European Union.
Identification number of the additive
Additive
Composition, chemical formula, description, analytical method
Species or category of animal
Maximum age
Minimum content
Maximum content
Other provisions
End of period of authorisation
mg of active substance of kg of complete feedingstuff with a moisture content of 12 %
Category: Sensory additives. Functional group: Colourants. (i) substances that add or restore colour in feedingstuffs
2a129
Allura Red AC
Additive compositionAllura Red AC described as the sodium salt as the principal component.Solid form (powder or granules)Characterisation of the active substance as the sodium saltAllura Red AC consists essentially of disodium 2-hydroxy-1-(2- methoxy-5-methyl-4-sulfonato-phenylazo) naphthalene-6-sulfonate and subsidiary colouring matters together with sodium chloride and/or sodium sulphate as the principal uncoloured components.The calcium and the potassium salts are also permittedSolid form (powder or granules) produced by chemical synthesisChemical formula: C18H14N2Na2O8S2CAS number: 25956-17-6Purity criteriaContent not less than 85 % total colouring matters, calculated as the sodium salt (assay)Water insoluble matter: ≤ 0,2 %Subsidiary colouring matters: ≤ 3 %Organic compounds other thancolouring matters:6-hydroxy-2-naphthalene sulfonic acid, sodium salt: ≤ 0,3 %4-amino-5-methoxy-2- methylbenezene sulfonic acid: ≤ 0,2 %
Unsulfonated primary aromatic amines: ≤ 0,01 % (calculated as aniline)
Ether extractable matter: ≤ 0,2 % from a solution of pH 7
Analytical method
note
For the quantification of Allura Red AC in the feed additive:
spectrophotometry at 504 nm (Commission Regulation (EU) No 231/2012 referring to FAO JECFA monographs n. 1 (Vol. 4))
For the quantification of Allura Red AC in feedingstuffs:
high performance liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS)
Cats
-
-
308
1. In the directions for use of the additive and premixture, the storage conditions and stability to heat treatment shall be indicated.2. For users of the additive and premixtures, feed business operators shall establish operational procedures and organisational measures to address potential risks resulting from its use. Where those risks cannot be eliminated or reduced to a minimum by such procedures and measures, the additive and premixtures shall be used with personal protective equipment, including breathing protection, safety glasses and gloves.