- battery
means a device as defined in Article 3 of Directive 2006/66/EC of the European Parliament and of the Council, in the sense also of ‘battery pack’ or ‘industrial battery or accumulator’ in the same Article;
- control panel
means an overall operating interface, containing controls and indicators, between the user and the welding equipment;
- electricity supply cable
means an electric energy supply cable meeting the performance and safety requirements of internationally recognised welding cable standards;
- equipment housing
means a casing intended to protect the product from the environment, including ambient humidity and possible shock impacts;
- equivalent model
means a model which has the same technical characteristics relevant for the technical information to be provided, but which is placed on the market or put into service by the same manufacturer or authorised representative or importer as another model with a different model identifier;
- fan
means a rotary bladed machine used to maintain a continuous flow of gas, typically air, passing through it and acts for instance as the internal cooling system for the power source;
- flux cored arc welding
means a welding process that uses composite tubular filler metal electrodes consisting of a metal sheath and a core of various powdered materials, producing an extensive slag cover on the face of a weld bead.
- gas supply hose
means a supply hose specifically designed for supply of fuel gases (such as acetylene), compressed air and shielding gases used in welding, normally consisting of a tube and a protective cover, often specific to the gas type used, and sometimes to the operating conditions;
- gas supply regulator
means a device which reduces the higher pressure of the supplied compressed gases to the lower pressure that can be safely used in the welding equipment, often equipped with a metering valve or flowmeter to measure and/or control gas flow;
- idle state
means the operating state in which the power is switched on and the welding circuit is not energised;
- idle state power consumption
means the power demand, in watts, in idle state;
- limited-duty arc welding
means arc welding and allied processes that are not for industrial and professional applications and that:
- manual metal arc welding
means an arc-welding process with a coated electrode where the operator’s hand controls the travel speed of the welding operation and the rate at which the electrode is fed into the electric arc;
- metal active gas welding
means a gas metal arc welding process whereby coalescence is produced by heating with an arc between a continuous filler metal (consumable) electrode and the workpiece area.
- metal inert gas welding
means a gas metal arc welding process whereby coalescence is produced by heating with an arc between a continuous filler metal (consumable) electrode and the workpiece area.
- model identifier
means the code, usually alphanumeric, which distinguishes a specific product model from other models with the same trade mark or the same manufacturer’s, authorised representative’s or importer’s name.
- plasma arc cutting
means an arc cutting process that uses a constricted arc and removes the molten metal in a high velocity jet of ionised gas (plasma gas) issuing from the constricting orifice.
- plasma gas
(also referred to as ‘orifice gas’ or ‘cutting gas’) means a gas directed into the torch to surround the electrode, which becomes ionised by the arc to form a plasma and issues from the torch nozzle as the plasma jet;
- power source
means a device that utilises alternating current (AC) to either power one or more AC power outputs, or which converts AC to one or more DC power outputs, for the purpose of powering a welding equipment;
- power source efficiency
means the ratio, expressed in a percentage, of the output power at standardised welding conditions and standardised welding load voltages, to the highest power consumption of the power source;
- professional repairer
means an operator or undertaking which provides services of repair and professional maintenance for welding equipment;
- resistance welding
means a thermo-electrical process in which heat is generated at the interface of the parts to be joined by passing an electrical current through the parts for a precisely controlled time and under a controlled pressure.
- self-shielded flux-cored welding
means a wire welding process in which a continuous hollow-wire electrode is fed through the welding gun into the weld joint without the need to use an external shielding gas to protect the weld pool from contamination.
- shielded metal arc welding
means an arc-welding process whereby coalescence is produced by heating with an electric arc between a covered metal electrode and the work-piece and work area.
- shielding gas
(also referred to as ‘secondary gas’) means a gas that does not pass through the orifice of the nozzle, but instead passes around the nozzle and forms a shield around the electric arc;
- spare part
means a separate part that can replace a part with the same or similar function in a welding equipment.
- stud welding
means a welding process in which a metal stud or a similar part is joined (manually, in automated or in semi-automated way) to a workpiece using an arc of electricity to heat both parts;
- submerged arc welding
means an arc welding process that uses an arc or arcs exceeding 600 amperes between a bare metal electrode or electrodes and the weld pool.
- tungsten inert gas welding
means an arc welding process whereby coalescence is produced by heating with an arc between a single tungsten (non-consumable) electrode and the workpiece area.
- welding equipment
means products that are used for manual, automated or semi-automated welding, brazing, soldering or cutting (or all of the above) via arc welding and allied processes, and that is stationary or transportable, and consists of linked parts or components, at least one of which moves and which are joined together to produce coalescence of metals by heating them to the welding temperature (with or without the application of pressure) or by the application of pressure alone, with or without the use of filler metal, and with or without the use of shielding gas(es), using appropriate tools and techniques, resulting in a product of defined geometry;
- welding torch
means a device which delivers the welding current to the electrode, which may include transferring the current to a consumable electrode, where used, and which also delivers the shielding gas, where used, to the electric arc area;
- welding wire drive
means a device, used to feed welding wire or filler material, that may be of the type of push, pull or a push-pull combination;