(2)Annex IV is amended as follows:Part A is replaced by the following:‘Part A: Tolerances for the analytical constituents set out in Annexes I, V, VI and VII(1)The tolerances laid down in this Part include technical and analytical deviations. Once analytical tolerances covering measurement uncertainties and procedural variations are fixed at Union level, the values set in point 2 should be adapted accordingly in order to cover only the technical tolerances.(2)Where the composition of a feed material or compound feed is found to deviate from the labelled value of the analytical constituents set out in Annexes I, V, VI and VII the following tolerances shall apply:Constituent | Declared content of the constituent | Tolerance| [%] | Below the labelled value | Above the labelled valuecrude fat | < 8 | 1 | 28 - 24 | 12,5 % | 25 %> 24 | 3 | 6crude fat, feed for non-food producing animals | < 16 | 2 | 416 - 24 | 12,5 % | 25 %> 24 | 3 | 6crude protein | < 8 | 1 | 18 - 24 | 12,5 % | 12,5 %> 24 | 3 | 3crude protein, feed for non-food producing animals | < 16 | 2 | 216 - 24 | 12,5 % | 12,5 %> 24 | 3 | 3crude ash | < 8 | 2 | 18 - 32 | 25 % | 12,5 %> 32 | 8 | 4crude fibre | < 10 | 1,75 | 1,7510 - 20 | 17,5 % | 17,5 %> 20 | 3,5 | 3,5sugar | < 10 | 1,75 | 3,510 - 20 | 17,5 % | 35 %> 20 | 3,5 | 7starch | < 10 | 3,5 | 3,510 - 20 | 35 % | 35 %> 20 | 7 | 7calcium | < 1 | 0,3 | 0,61 - 5 | 30 % | 60 %> 5 | 1,5 | 3magnesium | < 1 | 0,3 | 0,61 - 5 | 30 % | 60 %> 5 | 1,5 | 3sodium | < 1 | 0,3 | 0,61 - 5 | 30 % | 60 %> 5 | 1,5 | 3total phosphorus | < 1 | 0,3 | 0,31 - 5 | 30 % | 30 %> 5 | 1,5 | 1,5ash insoluble in hydrochloric acid | < 1 | no limits are set | 0,31 - < 5 | 30 %> 5 | 1,5potassium | < 1 | 0,2 | 0,41 - 5 | 20 % | 40 %> 5 | 1 | 2moisture | < 2 | no limits are set | 0,42 - < 5 | 20 %5 - 12,5 | 1> 12,5 | 8 %energy value | | 5 % | 10 %protein value | | 10 % | 20 %