law://eu/reg/2016/2225@2026-11-12THE EUROPEAN COMMISSION,Having regard to the Treaty on the Functioning of the European Union,Having regard to Regulation (EU) No 952/2013 of the European Parliament and of the Council of 9 October 2013 laying down the Union Customs Codenote, and in particular Article 57(4) and Article 58(2) thereof,Whereas:
HAS ADOPTED THIS REGULATION:
| Description of the goods | Classification(CN code) | Reasons |
|---|---|---|
| (1) | (2) | (3) |
| A cylindrical article predominantly made of steel (other than of cast steel) of a length of approximately 35 cm and a diameter of approximately 19 cm at its widest point (so-called ‘track roller’). It consists of the following main components: a cylindrical shell with a graduated cage for the chain guide; a highly polished shaft, and two bronze bushings and collars at both ends.The article is designed for use with the track chain of a crawler type excavator in conjunction with other similar track rollers for longitudinal and lateral guidance of the track chain.See imagenote | 84314980 | Classification is determined by general rules 1 and 6 for the interpretation of the Combined Nomenclature (CN), note 2(b) to Section XVI, and by the wording of CN codes 8431, 843149 and 84314980.Classification under heading 8708 as parts or accessories of the motor vehicles of headings 8701 to 8705 is excluded as the article is not designed for use with motor vehicles of those headings. The objective characteristics of the article (size and shape) are those of a track roller designed for use with the track chain of a crawler type excavator of heading 8429.The article is therefore to be classified under CN code 84314980 as parts suitable for use solely or principally with the machinery of headings 8425 to 8430 other than of cast steel. |
Source: EUR-Lex, © European Union, 1998-2026. Reuse authorised under Decision 2011/833/EU.