law://eu/reg/2014/431@2026-11-17THE EUROPEAN COMMISSION,Having regard to the Treaty on the Functioning of the European Union,Having regard to the Regulation (EC) No 1099/2008 of the European Parliament and of the Council of 22 October 2008 on energy statisticsnote, and in particular Article 4(3) and Article 9(3) thereof,Whereas:
HAS ADOPTED THIS REGULATION:
| Energy Product | Definition |
|---|---|
| 1.Anthracite | High rank coal used for industrial and residential applications. It has generally less than 10 % volatile matter and a high carbon content (about 90 % fixed carbon). Its gross calorific value is greater than 24000 kJ/kg on an ash-free but moist basis. |
| 2.Coking Coal | Bituminous coal with a quality that allows the production of a coke suitable to support a blast furnace charge. Its gross calorific value is greater than 24000 kJ/kg on an ash-free but moist basis. |
| 3.Other Bituminous Coal |
Source: EUR-Lex, © European Union, 1998-2026. Reuse authorised under Decision 2011/833/EU.
| Coal used for steam raising purposes and includes all bituminous coal that is not included under coking coal nor anthracite. It is characterised by higher volatile matter than anthracite (more than 10 %) and lower carbon content (less than 90 % fixed carbon). Its gross calorific value is greater than 24000 kJ/kg on an ash-free but moist basis. If bituminous coal is used in coke ovens it should be reported as coking coal. |
| 4.Sub-Bituminous Coal | Refers to non-agglomerating coal with a gross calorific value between 20000 kJ/kg and 24000 kJ/kg containing more than 31 % volatile matter on a dry mineral matter free basis. |
| 5.Lignite | Non-agglomerating coal with a gross calorific value less than 20000 kJ/kg and greater than 31 % volatile matter on a dry mineral matter free basis. |
| 6.Patent Fuel | A composition fuel manufactured from hard coal fines with the addition of a binding agent. The amount of patent fuel produced may, therefore, be slightly higher than the actual amount of coal consumed in the transformation process. |
| 7.Coke Oven Coke | The solid product obtained from carbonisation of coal, principally coking coal, at high temperature, it is low in moisture and volatile matter. Coke oven coke is used mainly in the iron and steel industry acting as energy source and chemical agent. Coke breeze and foundry coke are included in this category.Semi-coke (a solid product obtained from carbonisation of coal at low temperature) should be included in this category. Semi-coke is used as a domestic fuel or by the transformation plant itself. This heading also includes coke, coke breeze and semi-coke made from lignite. |
| 8.Gas Coke | By-product of hard coal used for production of town gas in gas works. Gas Coke is used for heating purposes. |
| 9.Coal Tar | A result of the destructive distillation of bituminous coal. Coal tar is the liquid by-product of the distillation of coal to make coke in the coke oven process or it is produced from brown coal (“low-temperature tar”). Coal tar can be further distilled into different organic products (e.g. benzene, toluene, naphthalene), which normally would be reported as a feedstock to the petrochemical industry. |
| 10.BKB(Brown Coal Briquettes) | BKB is a composition fuel manufactured from lignite or sub-bituminous coal, produced by briquetting under high pressure without the addition of a binding agent, including dried lignite fines and dust. |
| 11.Gas Works Gas | Covers all types of gases produced in public utility or private plants, whose main purpose is manufacture, transport and distribution of gas. It includes gas produced by carbonisation (including gas produced by coke ovens and transferred to gas works gas), by total gasification with or without enrichment with oil products (LPG, residual fuel oil, etc.), and by reforming and simple mixing of gases and/or air, reported under the rows “From Other Sources”. Under the transformation sector identify amounts of gas works gas transferred to blended natural gas which will be distributed and consumed through the natural gas grid.The production of other coal gases (i.e. coke oven gas, blast furnace gas and oxygen steel furnace gas) should be reported in the columns concerning such gases, and not as production of gas works gas. The coal gases transferred to gas works plants should then be reported (in their own column) in the transformation sector in the gas works plants row. The total amount of gas works gas resulting from transfers of other coal gases should appear in the production line for gas works gas. |
| 12.Coke Oven Gas | Obtained as a by-product of the manufacture of coke oven coke for the production of iron and steel. |
| 13.Blast Furnace Gas | Produced during the combustion of coke in blast furnaces in the iron and steel industry. It is recovered and used as a fuel partly within the plant and partly in other steel industry processes or in power stations equipped to burn it. The quantity of fuel should be reported on a gross calorific value basis. |
| 14.Other recovered gases | By-product of the production of steel in an oxygen furnace, recovered on leaving the furnace. The gases are also known as converter gas, LD gas or BOS gas. The quantity of recuperated fuel should be reported on a gross calorific value basis. Also covers non-specified manufactured gases not mentioned above, such as combustible gases of solid carbonaceous origin recovered from manufacturing and chemical processes not elsewhere defined. |
| 15.Peat | A combustible soft, porous or compressed, sedimentary deposit of plant origin with high water content (up to 90 % in the raw state), easily cut, of light to dark brown colour. Peat used for non-energy purposes is not included.This definition is without prejudice to the definition of renewable energy sources in Directive 2009/28/EC and to the 2006 IPCC Guidelines for National Greenhouse Gas Inventories. |
| 16.Peat Products | Products such as peat briquettes derived directly or indirectly from sod peat and milled peat. |
| 17.Oil shale and oil sands | Oil shale and oil sands are sedimentary rock which contains organic matter in the form of kerogen. Kerogen is a waxy hydrocarbon-rich material regarded as a precursor of petroleum. Oil shale may be burned directly or processed by heating to extract shale oil. Shale oil and other products derived from liquefaction should be reported on the Annual oil questionnaire in Other hydrocarbons. |
| 1.Energy quantities | 103 tonnesException: for gases (gas works gas, coke oven gas, blast furnace gas, other recovered gases) the measurement is directly in energy content and the unit to be used is therefore TJ (based on gross calorific values). |
| 2.Calorific values | MJ/tonne |
| 1.Energy quantities | Unless indicated differently, quantities of natural gas are declared by its energy content, i.e. in TJ, based on the gross calorific value.Where physical quantities are required, the unit is in 106 m3 assuming reference gas conditions (15 °C, 101,325 kPa). |
| 2.Calorific values | kJ/m3, assuming reference gas conditions (15 °C, 101,325 kPa). |
| 3.Storage working capacity | 106 m3, assuming reference gas conditions (15 °C, 101,325 kPa). |
| 4.Peak output | 106 m3/day, assuming reference gas conditions (15 °C, 101,325 kPa). |
| 1. | Enrichment capacityThe annual separative work capacity of operational enrichment plants (isotopic separation of Uranium). |
| 2. | Production capacity of fresh fuel elementsThe annual production capacity of fuel fabrication plants. MOX fuel fabrication plants are excluded. |
| 3. | Production capacity of MOX fuel fabrication plantsThe annual production capacity of MOX fuel fabrication plants. MOX fuel contains a mixture of Plutonium and Uranium (Mixed Oxide). |
| 4. | Production of fresh fuel elementsProduction of finished fresh fuel elements in nuclear fuel fabrication plants. Rods or other partial products are not included. Fabrication plants producing MOX fuel are also excluded. |
| 5. | Production of MOX fuel elementsProduction of finished fresh fuel elements in MOX fuel fabrication plants. Rods or other partial products are not included. |
| 6. | Production of nuclear heatThe total amount of heat generated by nuclear reactors for the production of electricity or for other useful applications of heat. |
| 7. | Annual average burnup of definitively discharged irradiated fuel elementsCalculated average of the burnup of the fuel elements which have been definitively discharged from the nuclear reactors during the concerned reference year. Excludes fuel elements which are temporarily discharged and are likely to be reloaded again later. |
| 8. |
| 1.Energy quantities | Electricity: GWhHeat: TJSolid fuels and manufactured gases: the units of measurement in Chapter 1 of this annex apply.Natural gas: the units of measurement in chapter 2 of this annex apply.Oil and petroleum products: the units of measurement in chapter 4 of this annex apply.Renewables and waste: the units of measurement in chapter 5 of this annex apply.Uranium and Plutonium: tHM (tons of heavy metal). |
| 2.Capacity | Electrical generation capacity: MWeHeat generation capacity: MWtEnrichment capacity (isotopic separation of Uranium): tSWU (tons of Separative Work Units).Production capacity of nuclear fuel elements: tHM (tons of heavy metal). |
| Energy Product | Definition |
|---|---|
| 1.Crude Oil | Crude oil is a mineral oil of natural origin comprising a mixture of hydrocarbons and associated impurities, such as sulphur. It exists in the liquid phase under normal surface temperature and pressure and its physical characteristics (density, viscosity, etc.) are highly variable. This category includes field or lease condensate recovered from associated and non-associated gas where it is commingled with the commercial crude oil stream. |
| 2.NGL | NGL are liquid or liquefied hydrocarbons recovered from natural gas in separation facilities or gas processing plants. Natural gas liquids include ethane, propane, butane (normal and iso-), (iso) pentane and pentanes plus (sometimes referred to as natural gasoline or plant condensate). |
| 3.Refinery Feedstocks | A refinery feedstock is a processed oil destined for further processing (e.g. straight run fuel oil or vacuum gas oil) excluding blending. With further processing, it will be transformed into one or more components and/or finished products. This definition also covers returns from the petrochemical industry to the refining industry (e.g. pyrolysis gasoline, C4 fractions, gasoil and fuel oil fractions). |
| 4.Additives/Oxygenates | Additives are non-hydrocarbon compounds added to or blended with a product to modify fuel properties (octane, cetane, cold properties, etc.):oxygenates, such as alcohols (methanol, ethanol), ethers (such as MTBE (methyl tertiary butyl ether), ETBE (ethyl tertiary butyl ether), TAME (tertiary amyl methyl ether));esters (e.g. rapeseed oil or dimethylester, etc.);chemical compounds (such as TML, TEL and detergents).Note: Quantities of additives/oxygenates (alcohols, ethers, esters and other chemical compounds) reported in this category should relate to the quantities destined for blending with fuels or for fuel use. |
| 4.1.Of Which: Biofuels | Biogasoline and Biodiesels. The definitions of Chapter 5, Renewable Energy and Energy from Waste, apply.Quantities of liquid biofuels reported in this category relate to the biofuel and not to the total volume of liquids into which the biofuels are blended.Excludes all trade of biofuels which have not been blended with transport fuels (i.e. in their pure form); these should be reported as per Chapter 5. The biofuels traded as part of transport fuels should be reported in the appropriate product indicating the biofuel portion. |
| 5.Other Hydro-carbons | Synthetic crude oil from tar sands, shale oil, etc., liquids from coal liquefaction, (see Chapter 1), output of liquids from natural gas conversion into gasoline (see Chapter 2), hydrogen and emulsified oils (e.g. Orimulsion).Excludes oil shale production, for which Chapter 1 applies.The production of shale oil (secondary product) is to be reported as “From other sources” in the “Other hydrocarbons category”. |
| 6.Refinery Gas (not liquefied) | Refinery gas includes a mixture of non-condensible gases mainly consisting of hydrogen, methane, ethane and olefins obtained during distillation of crude oil or treatment of oil products (e.g. cracking) in refineries. This also includes gases which are returned from the petrochemical industry. |
| 7.Ethane | A naturally gaseous straight-chain hydrocarbon, (C2H6) extracted from natural gas and refinery gas streams. |
| 8.LPG | LPG are light paraffinic hydrocarbons derived from the refinery processes, crude oil stabilisation and natural gas processing plants. They consist mainly of propane (C3H8) and butane (C4Hl0) or a combination of the two. They could also include propylene, butylene, isopropylene and isobutylene. LPG are normally liquefied under pressure for transportation and storage. |
| 9.Naphtha | Naphtha is a feedstock destined for either the petrochemical industry (e.g. ethylene manufacture or aromatics production) or for gasoline production by reforming or isomerisation within the refinery.Naphtha comprises material in the 30 °C and 210 °C distillation range or part of this range. |
| 10.Motor Gasoline | Motor gasoline consists of a mixture of light hydrocarbons distilling between 35 °C and 215 °C. It is used as a fuel for land based spark ignition engines. Motor gasoline may include additives, oxygenates and octane enhancers, including lead compounds such as TEL and TML.Includes motor gasoline blending components (excluding additives/oxygenates), e.g. alkylates, isomerate, reformate, cracked gasoline destined for use as finished motor gasoline. |
| 10.1.Of which: Biogasoline | The definitions of Chapter 5, Renewable Energy and Energy from Waste, apply. |
| 11.Aviation Gasoline | Motor spirit prepared especially for aviation piston engines, with an octane number suited to the engine, a freezing point of – 60 °C and a distillation range usually within the limits of 30 °C and 180 °C. |
| 12.Gasoline Type Jet Fuel (Naphtha Type Jet Fuel or JP4) | This includes all light hydrocarbon oils for use in aviation turbine power units, distilling between 100 °C and 250 °C. They are obtained by blending kerosenes and gasoline or naphthas in such a way that the aromatic content does not exceed 25 % in volume, and the vapour pressure is between 13,7kPa and 20,6kPa. |
| 13.Kerosene Type Jet Fuel | Distillate used for aviation turbine power units. It has the same distillation characteristics between 150 °C and 300 °C (generally not above 250 °C) and flash point as kerosene. In addition, it has particular specifications (such as freezing point) which are established by the International Air Transport Association (IATA).Includes kerosene blending components. |
| 13.1.Bio jet kerosene | Liquid biofuels derived from biomass and blended with or replacing jet kerosene. |
| 14.Other Kerosene | Refined petroleum distillate used in sectors other than aircraft transport. It distils between 150 °C and 300 °C. |
| 15.Gas/Diesel Oil (Distillate Fuel Oil) | Gas/diesel oil is primarily a medium distillate distilling between 180 °C and 380 °C. Includes blending components. Several grades are available depending on uses: |
| 15.1.Of which: Road Diesel | On-road diesel oil for diesel compression ignition (cars, trucks, etc.), usually of low sulphur content; |
| 15.1.1.From 15.1, of which: Biodiesels | The definitions of Chapter 5, Renewable Energy and Energy from Waste, apply. |
| 15.2.Of which: Heating and Other Gasoil | Light heating oil for industrial and commercial uses, marine diesel and diesel used in rail traffic, other gas oil including heavy gas oils which distil between 380 °C and 540 °C and which are used as petrochemical feedstocks. |
| 16.Fuel Oil | All residual (heavy) fuel oils (including those obtained by blending). Kinematic viscosity is above 10 cSt at 80 °C. The flash point is always above 50 °C and density is always more than 0,90 kg/l. |
| 16.1.Of which: Low Sulphur Content | Heavy fuel oil with sulphur content lower than 1 %. |
| 16.2.Of which: High Sulphur Content | Heavy fuel oil with sulphur content of 1 % or higher. |
| 17.White Spirit And SBP | Refined distillate intermediates with a distillation in the naphtha/kerosene range. They are sub-divided as:—Industrial Spirit (SBP)Light oils distilling between 30 °C and 200 °C. There are 7 or 8 grades of industrial spirit, depending on the position of the cut in the distillation range. The grades are defined according to the temperature difference between the 5 % volume and 90 % volume distillation points (which is not more than 60 °C).—White SpiritIndustrial spirit with a flash point above 30 °C. The distillation range of white spirit is 135 °C to 200 °C. |
| 18.Lubricants | Hydrocarbons produced from distillate by product; they are mainly used to reduce friction between bearing surfaces.Includes all finished grades of lubricating oil, from spindle oil to cylinder oil, and those used in greases, motor oils and all grades of lubricating oil base stocks. |
| 19.Bitumen | Solid, semi-solid or viscous hydrocarbon with a colloidal structure, being brown to black in colour, obtained as a residue in the distillation of crude oil, by vacuum distillation of oil residues from atmospheric distillation. Bitumen is often referred to as asphalt and is primarily used for construction of roads and for roofing material.Includes fluidised and cut back bitumen. |
| 20.Paraffin Waxes | These are saturated aliphatic hydrocarbons. These waxes are residues extracted when dewaxing lubricant oils. They have a crystalline structure which is more-or-less fine according to the grade. Their main characteristics are as follows: they are colourless, odourless and translucent, with a melting point above 45 °C. |
| 21.Petroleum Coke | Black solid by-product, obtained mainly by cracking and carbonising petroleum derived feedstock, vacuum bottoms, tar and pitches in processes such as delayed coking or fluid coking. It consists mainly of carbon (90 to 95 %) and has a low ash content. It is used as a feedstock in coke ovens for the steel industry, for heating purposes, for electrode manufacture and for production of chemicals. The two most important qualities are “green coke” and “calcinated coke”.Includes “catalyst coke” deposited on the catalyst during refining processes; this coke is not recoverable and is usually burned as refinery fuel. |
| 22.Other Products | All products not specifically mentioned above, for example: tar and sulphur.Includes aromatics (e.g. BTX or benzene, toluene and xylene) and olefins (e.g. propylene) produced within refineries. |
| 1.Energy quantities | 103 tonnes |
| 2.Calorific values | MJ/tonne |
| Energy Product | Definition |
|---|---|
| 1.Hydro power | Potential and kinetic energy of water converted into electricity in hydroelectric plants. Pumped storage must be included. Production must be reported for plant sizes of < 1 MW, 1 to < 10 MW, ≥ 10 MW and from pumped storage. |
| 2.Geothermal | Energy available as heat emitted from within the earth’s crust, usually in the form of hot water or steam. This energy production is the difference between the enthalpy of the fluid produced in the production borehole and that of the fluid eventually disposed of. It is exploited at suitable sites:for electricity generation using dry steam or high enthalpy brine after flashingdirectly as heat for district heating, agriculture etc. |
| 3.Solar Energy | Solar radiation exploited for hot water production and electricity generation. This energy production is the heat available to the heat transfer medium, i.e. the incident solar energy less the optical and collectors losses. Passive solar energy for the direct heating, cooling and lighting of dwellings or other buildings is not included. |
| 3.1.Of which: Solar Photovoltaic | Sunlight converted into electricity by the use of solar cells usually made of semi-conducting material which exposed to light will generate electricity. |
| 3.2.Of which: Solar Thermal | Heat from solar radiation; can consist of:(a) solar thermal-electric plants, or(b) equipment for the production of domestic hot water or for the seasonal heating of swimming pools (e.g. flat plate collectors, mainly of the thermosyphon type). |
| 4.Tide, Wave, Ocean | Mechanical energy derived from tidal movement, wave motion or ocean current and exploited for electricity generation. |
| 5.Wind | Kinetic energy of wind exploited for electricity generation in wind turbines. |
| 6.Industrial Waste (non-renewable) | Report wastes of industrial non-renewable origin (solids or liquids) combusted directly for the production of electricity and/or heat. The quantity of fuel used should be reported on a net calorific value basis. Renewable industrial waste should be reported in the Solid Biomass, Biogas and/or Liquid Biofuels categories. |
| 7.Municipal Waste: | Wastes produced by households, hospitals and the tertiary sector incinerated at specific installations, on a net calorific value basis. |
| 7.1.Of which: Renewable | The portion of municipal waste which is of biological origin. |
| 7.2.Of which: Non-Renewable | The portion of municipal waste which is of non-biological origin. |
| 8.Solid Biofuels: | Covers organic, non-fossil material of biological origin which may be used as fuel for heat production or electricity generation. It comprises: |
| 8.1.Of which: Charcoal | The solid residue of the destructive distillation and pyrolysis of wood and other vegetal material. |
| 9.Biogas: | A gas composed principally of methane and carbon dioxide produced by anaerobic digestion of biomass. |
| 10.Liquid Biofuels | The quantities of liquid biofuels reported in this category should relate to the quantities of biofuel and not to the total volume of liquids into which the biofuels are blended. For the particular case of imports and exports of liquid biofuels, only trade of quantities that have not been blended with transport fuels is concerned (i.e. in their pure form); trade of liquids biofuels blended to transport fuels should be reported in the oil data in Chapter 4.The following liquid biofuels are concerned: |
| 10.1.Of which: Biogasoline | This category includes bioethanol (ethanol produced from biomass and/or the biodegradable fraction of waste), biomethanol (methanol produced from biomass and/or the biodegradable fraction of waste), bioETBE (ethyl-tertio-butyl-ether produced on the basis of bioethanol; the percentage by volume of bioETBE that is calculated as biofuel is 47 %) and bioMTBE (methyl-tertio-butyl-ether produced on the basis of biomethanol: the percentage by volume of bioMTBE that is calculated as biofuel is 36 %). |
| 10.1.1.Biogasoline of which: Bioethanol | Ethanol produced from biomass and/or the biodegradable fraction of waste |
| 10.2.Of which: Biodiesels | This category includes biodiesel (a methyl-ester produced from vegetable or animal oil, of diesel quality), biodimethylether (dimethylether produced from biomass), Fischer Tropsch (Fischer Tropsch produced from biomass), cold extracted bio-oil (oil produced from oil seed through mechanical processing only) and all other liquid biofuels which are added to, blended with or used straight as transport diesel. |
| 10.3.Bio jet kerosene | Liquid biofuels derived from biomass and blended with or replacing Jet kerosene. |
| 10.4.Other liquid biofuels | Liquid biofuels, used directly as fuel, not included in biogasoline nor biodiesels. |
| 1.Electricity generation | MWh |
| 2.Heat production | TJ |
| 3.Renewable energy products | Biogasoline, biodiesels and other liquid biofuels: tonnesCharcoal: 1000 tonnesAll others: TJ (on the basis of net calorific values). |
| 4.Solar collectors surface | 1000 m2 |
| 5.Plants capacity | Biofuels: tonnes/yearAll others: MWe |
| 6.Calorific values | kJ/kg (net calorific value). |
| 9. | Capacity (Uranium and Plutonium) of reprocessing plantsAnnual reprocessing capacity of Uranium and Plutonium. |