(b)points 2 and 3 of Part B are replaced by the following:‘2.Columns 6 and 7 of the table: for any given surface water body, applying the MAC-EQS means that the measured concentration at any representative monitoring point within the water body does not exceed the standard.However, in accordance with Section 1.3.4 of Annex V to Directive 2000/60/EC, Member States may introduce statistical methods, such as a percentile calculation, to ensure an acceptable level of confidence and precision for determining compliance with the MAC-EQS. Where Member States do so, such statistical methods shall comply with detailed rules laid down in accordance with the examination procedure referred to in Article 9(2) of this Directive.3.The water EQS laid down in this Annex are expressed as total concentrations in the whole water sample.By way of derogation from the first subparagraph, in the case of cadmium, lead, mercury and nickel (hereinafter “metals”), the water EQS refer to the dissolved concentration, i.e. the dissolved phase of a water sample obtained by filtration through a 0,45 μm filter or any equivalent pre-treatment, or, where specifically indicated, to the bioavailable concentration.Member States may, when assessing the monitoring results against the relevant EQS, take into account:
(a)natural background concentrations for metals and their compounds where such concentrations prevent compliance with the relevant EQS;
(b)hardness, pH, dissolved organic carbon or other water quality parameters that affect the bioavailability of metals, the bioavailable concentrations being determined using appropriate bioavailability modelling.’;