means ‘biocatalysts’ for specific chemical or biochemical reactions.ML7 ‘Biological agents’ Pathogens or toxins, selected or modified (such as altering purity, shelf life, virulence, dissemination characteristics, or resistance to UV radiation) to produce casualties in humans or animals, degrade equipment or damage crops or the environment.ML4, 10 ‘Civil aircraft’ Those ‘aircraft’ listed by designation in published airworthiness certification lists by civil aviation authorities of one or more EU Member States or Wassenaar Arrangement Participating States to fly commercial civil internal and external routes or for legitimate civil, private or business use.ML21 ‘Cyber incident response’ The process of exchanging necessary information on a cybersecurity incident with individuals or organisations responsible for conducting or coordinating remediation to address the cybersecurity incident.ML17 21, 22 ‘Development’ Is related to all stages prior to serial production, such as: design, design research, design analyses, design concepts, assembly and testing of prototypes, pilot production schemes, design data, process of transforming design data into a product, configuration desig
means any structural, electrical, mechanical, or other change that provides a non-military item with military capabilities equivalent to an item which is specially designed for military use.
means an authorisation by a national authority of a Member State for suppliers to transfer defence-related products to a recipient in another Member State;
1.The aim of this Directive is to simplify the rules and procedures applicable to the intra-Community transfer of defence-related products in order to ensure the proper functioning of the internal market.
2.This Directive does not affect the discretion of Member States as regards policy on the export of defence-related products.
3.The application of this Directive is subject to Articles 30 and 296 of the Treaty.
4.This Directive does not affect the possibility for Member States to pursue and further develop intergovernmental cooperation, whilst complying with the provisions of this Directive.
3.‘supplier’ means the legal or natural person established within the Community who is legally responsible for a transfer;
4.‘recipient’ means the legal or natural person established within the Community who is legally responsible for the receipt of a transfer;
5.‘transfer licence’ means an authorisation by a national authority of a Member State for suppliers to transfer defence-related products to a recipient in another Member State;
6.‘export licence’ means an authorisation to supply defence-related products to a legal or natural person in any third country;
7.‘passage through’ means the transport of defence-related products through one or more Member States other than the originating and receiving Member States.
1.The transfer of defence-related products between Member States shall be subject to prior authorisation. No further authorisation by other Member States shall be required for passage through Member States or for entrance onto the territory of the Member State where the recipient of defence-related products is located, without prejudice to the application of provisions necessary on grounds of public security or public policy such as, inter alia, the safety of transport.
2.Notwithstanding paragraph 1, Member States may exempt transfers of defence-related products from the obligation of prior authorisation set out in that paragraph where:
(a)the supplier or the recipient is a governmental body or part of the armed forces;
1.Member States shall ensure that suppliers of defence-related products inform recipients of the terms and conditions of the transfer licence, including limitations, relating to the end-use or export of the defence-related products.
2.Member States shall ensure that suppliers inform, within a reasonable time, the competent authorities of the Member State from whose territory they wish to transfer defence-related products of their intention to use a general transfer licence for the first time. Member States may determine the additional information that may be required regarding defence-related products transferred under a general transfer licence.
3.Member States shall ensure and regularly check that suppliers keep detailed and complete records of their transfers, in accordance with the legislation in force in that Member State, and shall determine the reporting requirements attached to the use of a general, global or individual . Such records shall include commercial documents containing the following information:
1.Member States shall ensure that, when completing the formalities for the export of defence-related products at the customs office responsible for handling the export declaration, the exporter furnishes proof that any necessary export licence has been obtained.
2.Without prejudice to Council Regulation (EEC) No 2913/92 of 12 October 1992 establishing the Community Customs Codenote, a Member State may also, for a period not exceeding 30 working days, suspend the process of export from its territory of defence-related products received from another Member State under a transfer licence and incorporated in another defence-related product or, if necessary, prevent by other means such products from leaving the Community from its territory, where it considers that:
(a)relevant information was not taken into account when the export licence was granted; or
The Commission is empowered to adopt delegated acts in accordance with Article 13a amending the list of defence-related products set out in the Annex, so that it strictly corresponds to the Common Military List of the European Union.Where imperative grounds of urgency so require, the procedure provided for in Article 13b shall apply to delegated acts adopted pursuant to this Article.
1.The power to adopt delegated acts is conferred on the Commission subject to the conditions laid down in this Article.
2.The power to adopt delegated acts referred to in Article 4(3) and Article 13 shall be conferred on the Commission for a period of five years from 26 July 2019. The Commission shall draw up a report in respect of the delegation of power not later than nine months before the end of the five-year period. The delegation of power shall be tacitly extended for periods of an identical duration, unless the European Parliament or the Council opposes such extension not later than three months before the end of each period.
1.Where a licensing Member State considers that there is a serious risk that a recipient certified in accordance with Article 9 in another Member State will not comply with a condition attached to a general transfer licence, or where a licensing Member State considers that public policy, public security or its essential security interests could be affected, it shall inform that other Member State and request verification of the situation.
2.Where the doubts referred to in paragraph 1 persist, the licensing Member State may provisionally suspend the effect of its general transfer licence with regard to such recipients. It shall inform the other Member States and the Commission of the reasons for that safeguard measure. The Member State which adopted that measure may decide to lift it where it considers that it is no longer justified.
Note 1Terms in ‘double quotations’ are defined terms. Refer to ‘Definitions of Terms used in this List’ annexed to this List.Note 2In some instances chemicals are listed by name and CAS number. The list applies to chemicals of the same structural formula (including hydrates) regardless of name or CAS number. CAS numbers are shown to assist in identifying a particular chemical or mixture, irrespective of nomenclature. CAS numbers cannot be used as unique identifiers because some forms of the listed chemical have different CAS numbers, and mixtures containing a listed chemical may also have different CAS numbers.Note 3‘EU Dual-Use list’ refers to Annex I to Regulation (EU) 2021/821 of the European Parliament and of the Council of 20 May 2021 setting up a Union regime for the control of exports, brokering, technical assistance, transit and transfer of dual-use items (recast).
ML1Smooth-bore weapons with a calibre of less than 20 mm, other arms and automatic weapons with a calibre of 12,7 mm (calibre 0,50 inches) or less and accessories, as follows, and specially designed components therefor:NoteML1 does not apply to:
1.For the purposes of ML8, excluding ML8.c.11. or ML8.c.12., ‘mixture’ refers to a composition of two or more substances with at least one substance being listed in the ML8 sub-items.
(b)supplies are made by the European Union, NATO, IAEA or other intergovernmental organisations for the performance of their tasks;
(c)the transfer is necessary for the implementation of a cooperative armament programme between Member States;
(d)the transfer is linked to humanitarian aid in the case of disaster or as a donation in an emergency; or
(e)the transfer is necessary for or after repair, maintenance, exhibition or demonstration.
3.The Commission is empowered to adopt delegated acts in accordance with Article 13a, at the request of a Member State or on its own initiative, amending paragraph 2, in order to include cases where:
(a)the transfer takes place under conditions which do not affect public policy or public security;
(b)the obligation of prior authorisation has become incompatible with international commitments of the Member States subsequent to the adoption of this Directive;
(c)it is necessary for intergovernmental cooperation, as referred to in Article 1(4).
4.Member States shall ensure that suppliers wishing to transfer defence-related products from their territory may use general transfer licences or apply for global or individual transfer licences in accordance with Articles 5, 6 and 7.
5.Member States shall determine the type of transfer licence for defence-related products or categories of defence-related products concerned in accordance with the provisions of this Article and Articles 5, 6 and 7.
6.Member States shall determine all the terms and conditions of transfer licences, including any limitations on the export of defence-related products to legal or natural persons in third countries, having regard, inter alia, to the risk for the preservation of human rights, peace, security and stability created by the transfer. Member States may, whilst complying with Community law, avail themselves of the possibility to request end-use assurances, including end-user certificates.
7.Member States shall determine the terms and conditions of transfer licences for components on the basis of an assessment of the sensitivity of the transfer according, inter alia, to the following criteria:
(a)the nature of the components in relation to the products in which they are to be incorporated and any end-use of the finished products which might give rise to concern;
(b)the significance of the components in relation to the products in which they are to be incorporated.
8.Except where they consider that the transfer of components is sensitive, Member States shall refrain from imposing any export limitations for components where the recipient provides a declaration of use in which it declares that the components subject to that transfer licence are integrated or are to be integrated into its own products and cannot at a later stage be transferred or exported as such, unless for the purposes of maintenance or repair.
9.Member States may withdraw, suspend or limit the use of transfer licences they have issued at any time for reasons of protection of their essential security interests, on grounds of public policy or public security, or as a result of non-compliance with the terms and conditions attached to the transfer licence.
1.Member States shall publish general transfer licences directly granting authorisation to suppliers established on their territory, which fulfil the terms and conditions attached to the general transfer licence, to perform transfers of defence-related products, to be specified in the general transfer licence, to a category or categories of recipients located in another Member State.
2.Without prejudice to Article 4(2), general transfer licences shall be published at least where:
(a)the recipient is part of the armed forces of a Member State or a contracting authority in the field of defence, purchasing for the exclusive use by the armed forces of a Member State;
(b)the recipient is an undertaking certified in accordance with Article 9;
(c)the transfer is made for the purposes of demonstration, evaluation or exhibition;
(d)the transfer is made for the purposes of maintenance and repair, if the recipient is the originating supplier of the defence-related products.
3.Member States participating in an intergovernmental cooperation programme concerning the development, production and use of one or more defence-related products may publish a general transfer licence for such transfers to other Member States which participate in that programme as are necessary for the execution of that programme.
4.Without prejudice to the other provisions of this Directive, Member States may lay down the conditions for registration prior to first use of a general transfer licence.
1.Member States shall decide to grant global transfer licences to an individual supplier, at its request, authorising transfers of defence-related products to recipients in one or more other Member States.
2.Member States shall determine in each global transfer licence the defence-related products or categories of products covered by the global transfer licence and the authorised recipients or category of recipients.A global transfer licence shall be granted for a period of three years, which may be renewed by the Member State.
Member States shall decide to grant individual transfer licences to an individual supplier at its request authorising one transfer of a specified quantity of specified defence-related products to be transmitted in one or several shipments to one recipient where:
(b)it is necessary for the protection of the essential security interests of the Member State or on grounds of public policy;
(c)it is necessary for compliance with international obligations and commitments of Member States; or
(d)a Member State has serious reason to believe that the supplier will not be able to comply with all the terms and conditions necessary to grant it a global transfer licence.
(f)proof that the information on an export limitation attached to a transfer licence has been transmitted to the recipient of the defence-related products.
4.Member States shall ensure that suppliers keep the records referred to in paragraph 3 for a period at least equal to that provided for in relevant national legislation relating to record-keeping requirements for economic operators in force in that Member State, and in any event for not less than three years from the end of the calendar year in which the transfer took place. They shall be provided at the request of the competent authorities of the Member State from whose territory the supplier transferred the defence-related products.
1.Member States shall designate competent authorities to carry out the certification of recipients established on their territory of defence-related products under transfer licences published by other Member States in accordance with Article 5(2)(b).
2.The certification shall establish the reliability of the recipient undertaking, in particular as regards its capacity to observe export limitations of defence-related products received under a transfer licence from another Member State. Reliability shall be assessed according to the following criteria:
(a)proven experience in defence activities, taking into account in particular the undertaking’s record of compliance with export restrictions, any court decisions on this matter, any authorisation to produce or commercialise defence-related products and the employment of experienced management staff;
(b)relevant industrial activity in defence-related products within the Community, in particular capacity for system/sub-system integration;
(c)the appointment of a senior executive as the dedicated officer personally responsible for transfers and exports;
(d)a written commitment of the undertaking, signed by the senior executive referred to in point (c), that the undertaking will take all necessary steps to observe and enforce all specific conditions related to the end-use and export of any specific component or product received;
(e)a written commitment of the undertaking, signed by the senior executive referred to in point (c), to provide to the competent authorities, with due diligence, detailed information in response to requests and inquiries concerning the end-users or end-use of all products exported, transferred or received under a transfer licence from another Member State; and
(f)a description, countersigned by the senior executive referred to in point (c), of the internal compliance programme or transfer and export management system implemented in the undertaking. This description shall provide details of the organisational, human and technical resources allocated to the management of transfers and exports, the chain of responsibility within the undertaking, internal audit procedures, awareness-raising and staff training, physical and technical security arrangements, record-keeping and traceability of transfers and exports.
3.Certificates shall contain the following information:
(a)the competent authority issuing the certificate;
(c)a statement of the conformity of the recipient with the criteria referred to in paragraph 2; and
(d)the date of issue and period of validity of the certificate.
The period of validity of the certificate referred to in point (d) shall in any case not exceed five years.
4.Certificates may contain further conditions relating to the following:
(a)the provision of information required for the verification of compliance with the criteria referred to in paragraph 2;
(b)the suspension or revocation of the certificate.
5.Competent authorities shall monitor the compliance of the recipient with the criteria referred to in paragraph 2 at least every three years, and with any condition attached to the certificates referred to in paragraph 4.
6.Member States shall recognise any certificates issued in accordance with this Directive in another Member State.
7.If a competent authority finds that the holder of a certificate established on the territory of its Member State no longer satisfies the criteria referred to in paragraph 2 or any of the conditions referred to in paragraph 4, it shall take appropriate measures. Such measures may include revoking the certificate. The competent authority shall inform the Commission and the other Member States of its decision.
8.Member States shall publish and regularly update a list of certified recipients and inform the Commission, the European Parliament and the other Member States thereof.The Commission shall make publicly available on its website a central register of recipients certified by Member States.
Member States shall ensure that recipients of defence-related products, when applying for an export licence, declare to their competent authorities, in cases where such products received under a transfer licence from another Member State have export limitations attached to them, that they have complied with the terms of those limitations, including, as the case may be, by having obtained the required consent from the originating Member State.
(b)circumstances have materially changed since the grant of the export licence.
3.Member States may provide that customs formalities for the export of defence-related products can be completed only at certain customs offices.
4.Member States availing themselves of the option set out in paragraph 3 shall inform the Commission of the relevant customs offices. The Commission shall publish that information in the C series of the Official Journal of the European Union.
Acting in liaison with the Commission, Member States shall take all appropriate measures to establish direct cooperation and exchange of information between their national competent authorities.
The delegation of power referred to in Article 4(3) and Article 13 may be revoked at any time by the European Parliament or by the Council. A decision to revoke shall put an end to the delegation of the power specified in that decision. It shall take effect the day following the publication of the decision in the Official Journal of the European Union or at a later date specified therein. It shall not affect the validity of any delegated acts already in force.
4.Before adopting a delegated act, the Commission shall consult experts designated by each Member State in accordance with the principles laid down in the Interinstitutional Agreement of 13 April 2016 on Better Law-Making.
5.As soon as it adopts a delegated act, the Commission shall notify it simultaneously to the European Parliament and to the Council.
6.A delegated act adopted pursuant to Article 4(3) and Article 13 shall enter into force only if no objection has been expressed either by the European Parliament or the Council within a period of three months of notification of that act to the European Parliament and the Council or if, before the expiry of that period, the European Parliament and the Council have both informed the Commission that they will not object. That period shall be extended by two months at the initiative of the European Parliament or of the Council.
1.Delegated acts adopted under this Article shall enter into force without delay and shall apply as long as no objection is expressed in accordance with paragraph 2. The notification of a delegated act to the European Parliament and to the Council shall state the reasons for the use of the urgency procedure.
2.Either the European Parliament or the Council may object to a delegated act in accordance with the procedure referred to in Article 13a(6). In such a case, the Commission shall repeal the act immediately following the notification of the decision to object by the European Parliament or by the Council.
1.The Commission shall be assisted by a committee.
2.Where reference is made to this paragraph, Article 5a(1) to (4) and Article 7 of Decision 1999/468/EC shall apply, having regard to the provisions of Article 8 thereof.
Member States shall lay down rules on penalties applicable to infringements of the provisions adopted in implementation of this Directive, in particular in the event of false or incomplete information required under Article 8(1) or Article 10 being provided as regards compliance with export limitations attached to a transfer licence. The Member States shall take all measures necessary to ensure that those rules are implemented. The penalties provided for shall be effective, proportionate and dissuasive.
1.By 30 June 2012, the Commission shall report on the measures taken by the Member States with a view to the transposition of this Directive, and in particular Articles 9 to 12 and Article 15 thereof.
2.By 30 June 2016, the Commission shall review the implementation of this Directive and report thereon to the European Parliament and the Council. It shall evaluate in particular whether, and to what extent, the objectives of this Directive have been achieved, with regard, inter alia, to the functioning of the internal market. In its report, the Commission shall review the application of Articles 9 to 12 and Article 15 of this Directive, and shall evaluate the impact of this Directive on the development of a European defence equipment market and a European defence technological and industrial base, having regard, inter alia, to the situation of small and medium-sized enterprises. If necessary, the report shall be accompanied by a legislative proposal.
1.Member States shall adopt and publish, no later than 30 June 2011, the laws, regulations and administrative provisions necessary to comply with this Directive. They shall forthwith communicate to the Commission the text of those measures.They shall apply those measures from 30 June 2012.When Member States adopt those measures, they shall contain a reference to this Directive or be accompanied by such reference on the occasion of their official publication. The methods of making such reference shall be laid down by Member States.
2.Member States shall communicate to the Commission the text of the main provisions of national law which they adopt in the field covered by this Directive.
2.For the purposes of ML8, particle size is the mean particle diameter on a weight or volume basis. International or equivalent national standards will be used in sampling and determining particle size.
2.For the purposes of ML17, ‘modified’ means any structural, electrical, mechanical, or other change that provides a non-military item with military capabilities equivalent to an item which is specially designed for military use.
a.Firearms specially designed for dummy ammunition and which are incapable of discharging a projectile;
a.Cyanogen chloride (CAS 506-77-4);
a.‘Explosives’ as follows, and ‘mixtures’ thereof:
1.ADNBF (aminodinitrobenzofuroxan or 7-amino-4,6-dinitrobenzofurazane-1-oxide) (CAS 97096-78-1);
10.DIPAM (3,3′-diamino-2,2′,4,4′,6,6′-hexanitrobiphenyl or dipicramide) (CAS 17215-44-0);
11.DNGU (DINGU or dinitroglycoluril) (CAS 55510-04-8);
12.Furazans as follows:
a.DAAOF (DAAF, DAAFox, or diaminoazoxyfurazan);
b.DAAzF (diaminoazofurazan) (CAS 78644-90-3);
13.HMX and derivatives (see also ML8.g.5. for its ‘precursors’), as follows:
a.HMX (Cyclotetramethylenetetranitramine, octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazine, 1,3,5,7-tetranitro-1,3,5,7-tetraza-cyclooctane, octogen or octogene) (CAS 2691-41-0);
b.difluoroaminated analogs of HMX;
c.K-55 (2,4,6,8-tetranitro-2,4,6,8-tetraazabicyclo [3,3,0]-octanone-3, tetranitrosemiglycouril or keto-bicyclic HMX) (CAS 130256-72-3);
39.Energetic ionic materials melting between 343 K (70 °C) and 373 K (100 °C) and with detonation velocity exceeding 6800 m/s or detonation pressure exceeding 18 GPa (180 kbar);
4.CL-20 (HNIW or Hexanitrohexaazaisowurtzitane) (CAS 135285-90-4); chlathrates of CL-20 (see also ML8.g.3. and ML.8.g.4. for its ‘precursors’);
NoteML8.a. includes ‘explosive co-crystals’.Technical NoteFor the purposes of ML8.a. Note, an ‘explosive co-crystal’ is a solid material consisting of an ordered three dimensional arrangement of two or more explosive molecules, where at least one is specified in ML8.a.
a.Ammonium picrate (CAS 131-74-8);
a.Specially shaped and formulated for civil-use gas generation devices;
a.Vessels and components, as follows:
1.Vessels (surface or underwater) specially designed or modified for military use, regardless of current state of repair or operating condition, and whether or not they contain weapon delivery systems or armour, and hulls or parts of hulls for such vessels, and components therefor specially designed for military use;NoteML9.a.1. includes vehicles specially designed or modified for the delivery of divers.
2.Surface vessels, not specified in ML9.a.1., having any of the following, fixed or integrated into the vessel:
a.Automatic weapons specified in ML1, or weapons specified in ML2, ML4, ML12 or ML19, or ‘mountings’ or hard points for weapons having a calibre of 12,7 mm or greater;Technical NoteFor the purposes of ML9.a.2.a., ‘mountings’ refers to weapon mounts or structural strengthening for the purposes of installing weapons.
b.Fire control systems specified in ML5;
c.Having all of the following:
1.‘Chemical, Biological, Radiological and Nuclear (CBRN) protection’; and
2.‘Pre-wet or wash down system’ designed for decontamination purposes; or
Technical NoteFor the purposes of ML9.a.2.c.2., ‘pre-wet or wash down system’ is a seawater spray system capable of simultaneously wetting the exterior superstructure and decks of a vessel.
d.Active weapon countermeasure systems specified in ML4.b., ML5.c. or ML11.a. and having any of the following:
1.‘CBRN protection’;
2.Hull and superstructure, specially designed to reduce the radar cross section;
3.Thermal signature reduction devices, (e.g. an exhaust gas cooling system), excluding those specially designed to increase overall power plant efficiency or to reduce the environmental impact; or
4.A degaussing system designed to reduce the magnetic signature of the whole vessel;
Technical NoteFor the purposes of ML9.a.2., ‘CBRN protection’ is a self-contained interior space containing features such as over-pressurization, isolation of ventilation systems, limited ventilation openings with CBRN filters and limited personnel access points incorporating air-locks.
a.Manned ‘aircraft’ and ‘lighter-than-air vehicles’, and specially designed components therefor;
a.Not a combat ‘aircraft’;
a.Aero-engines designed or modified for military use which have been certified by civil aviation authorities of one or more EU Member States or Wassenaar Arrangement Participating States for use in ‘civil aircraft’, or specially designed components therefor;
a.Were first manufactured before 1946;
a.Electronic equipment specially designed for military use and specially designed components therefor;NoteML11.a. includes:
a.Electronic countermeasure and electronic counter-countermeasure equipment (i.e. equipment designed to introduce extraneous or erroneous signals into radar or radio communication receivers or otherwise hinder the reception, operation or effectiveness of adversary electronic receivers including their countermeasure equipment), including jamming and counter-jamming equipment;
b.Frequency agile tubes;
c.Electronic systems or equipment, designed either for surveillance and monitoring of the electromagnetic spectrum for military intelligence or security purposes or for counteracting such surveillance and monitoring;
d.Underwater countermeasures, including acoustic and magnetic jamming and decoy, equipment designed to introduce extraneous or erroneous signals into sonar receivers;
e.Data processing security equipment, data security equipment and transmission and signalling line security equipment, using cryptographic functionality;
f.Identification, authentification and keyloader equipment and key management, manufacturing and distribution equipment;
i.Digital demodulators specially designed for signals intelligence;
j.‘Automated Command and Control Systems’.Technical NoteFor the purposes of ML11.a. Note j., ‘Automated Command and Control Systems’ are electronic systems, through which information essential to the effective operation of the grouping, major formation, tactical formation, unit, ship, subunit or weapons under command is entered, processed and transmitted. This is achieved by the use of computer and other specialised hardware designed to support the functions of a military command and control organisation. The main functions of an automated command and control system are: the efficient automated collection, accumulation, storage and processing of information; the display of the situation and the circumstances affecting the preparation and conduct of combat operations; operational and tactical calculations for the allocation of resources among force groupings or elements of the operational order of battle or battle deployment according to the mission or stage of the operation; the preparation of data for appreciation of the situation and decision-making at any point during operation or battle; computer simulation of operations.
N.B.For ‘software’ associated with military ‘Software’ Defined Radio (SDR), see ML21.
a.Rifles and combination guns, handguns, machine, sub-machine and volley guns;NoteML1.a. does not apply to the following:
a.Rifles and combination guns, manufactured earlier than 1938;
b.Reproductions of rifles and combination guns, the originals of which were manufactured earlier than 1890;
c.Handguns, volley guns and machine guns, manufactured earlier than 1890, and their reproductions;
d.Rifles or handguns, specially designed to discharge an inert projectile by compressed air or CO2;
e.Handguns specially designed for any of the following:
1.Slaughtering of domestic animals;or
2.Tranquilising of animals.
a.Kinetic energy weapon systems specially designed for destruction or effecting mission-abort of a target;
a.Launch propulsion systems capable of accelerating masses larger than 0,1 g to velocities in excess of 1,6 km/s, in single or rapid fire modes;
a.Electromagnetic;
a.Metallic or non-metallic armoured plate, having any of the following:
1.Manufactured to comply with a military standard or specification; or
2.Suitable for military use;N.B.For body armour plates, see ML13.d.2.
a.Recorders and image processing equipment;
a.Diving and underwater swimming apparatus, specially designed or modified for military use, as follows:
1.Self-contained diving rebreathers, closed or semi-closed circuit;
2.Underwater swimming apparatus specially designed for use with the diving apparatus specified in ML17.a.1.;N.B.See also 8A002.q. on the EU Dual-Use List.
a.Equipment specially designed or modified for the ‘production’ of items specified by the EU Common Military List, and specially designed components therefor;
a.‘Laser’ ‘weapon systems’ not specified by ML19.f.;
a.‘Lasers’ of sufficient power to effect destruction similar to the manner of conventional ammunition;
a.Prime power generation, energy storage, switching, power conditioning or fuel-handling equipment;
a.Guns, howitzers, cannon, mortars, anti-tank weapons, projectile launchers, military flame throwers, rifles, recoilless rifles and smooth-bore weapons;Note 1ML2.a. includes injectors, metering devices, storage tanks and other specially designed components for use with liquid propelling charges for any of the equipment specified by ML2.a.Note 2ML2.a. does not apply to weapons as follows:
a.Rifles, smooth-bore weapons and combination guns, manufactured earlier than 1938;
b.Reproductions of rifles, smooth-bore weapons and combination guns, the originals of which were manufactured earlier than 1890;
c.Guns, howitzers, cannons, mortars, manufactured earlier than 1890;
d.Smooth-bore weapons used for hunting or sporting purposes. These weapons must not be specially designed for military use or of the fully automatic firing type;
e.Smooth-bore weapons specially designed for any of the following:
1.Slaughtering of domestic animals;
2.Tranquillizing of animals;
3.Seismic testing;
4.Firing of industrial projectiles;or
5.Disrupting Improvised Explosive Devices (IEDs);N.B.For disruptors, see ML4 and 1A006 on the EU Dual-Use List.
f.Hand-held projectile launchers specially designed to launch tethered projectiles having no high explosive charge or communications link, to a range of less than or equal to 500 m.
a.Equipment specially designed or configured to be installed in a vehicle for military ground, marine, airborne or space applications, capable of operating while in motion and of producing or maintaining temperatures below 103 K (– 170 °C);NoteML20.a. includes mobile systems incorporating or employing accessories or components manufactured from non-metallic or non-electrical conductive materials, such as plastics or epoxy-impregnated materials.
a.‘Software’ specially designed or modified for any of the following:
1.‘Development’, ‘production’, operation or maintenance of equipment specified by the EU Common Military List;
2.‘Development’ or ‘production’ of materials specified by the EU Common Military List; or
3.‘Development’, ‘production’, operation or maintenance of ‘software’ specified by the EU Common Military List;
a.‘Technology’, other than specified in ML22.b, which is ‘required’ for the ‘development’, ‘production’, operation, installation, maintenance (checking), repair, overhaul or refurbishing of items specified by the EU Common Military List;
a.‘Technology’ that is the minimum necessary for the installation, operation, maintenance (checking) or repair, of those items which are not controlled or whose export has been authorised;
a.Ammunition for weapons specified by ML1, ML2 or ML12;
a.Bombs, torpedoes, grenades, smoke canisters, rockets, mines, missiles, depth charges, demolition-charges, demolition-devices, demolition-kits, ‘pyrotechnic’ devices, cartridges, submunitions therefor and simulators (i.e. equipment simulating the characteristics of any of these items), specially designed for military use;NoteML4.a. includes:
a.Smoke grenades, fire bombs, incendiary bombs and explosive devices;
b.Missile or rocket nozzles and re-entry vehicle nosetips.N.B.For grenade or canister ammunition for weapons or projectors specified in ML1 or ML2 and submunitions specially designed for ammunition, see ML3.
a.Weapon sights, bombing computers, gun laying equipment and weapon control systems;
a.Ground vehicles and components therefor, specially designed or modified for military use;Note 1ML6.a. includes:
a.Tanks and other military armed vehicles and military vehicles fitted with mountings for arms or equipment for mine laying or the launching of munitions specified by ML4;
a.Pneumatic tyre casings of a kind specially designed to be bullet-proof;
b.Armoured vehicles;
b.Armoured protection of vital parts (e.g. fuel tanks or vehicle cabs);
c.Amphibious and deep water fording vehicles;
c.Special reinforcements or mountings for weapons;
d.Recovery vehicles and vehicles for towing or transporting ammunition or weapon systems and associated load handling equipment;
d.Black-out lighting.
e.Trailers.
Note 2Modification of a ground vehicle for military use specified by ML6.a. entails a structural, electrical or mechanical change involving one or more components that are specially designed for military use. Such components include:
a.Were manufactured before 1946;
a.‘Biological agents’ or radioactive materials selected or modified to increase their effectiveness in producing casualties in humans or animals, degrading equipment or damaging crops or the environment;
aa.2-Nitrodiphenylamine (2-NDPA) (CAS 119-75-5);
b.Firearms specially designed to launch tethered projectiles having no high explosive charge or communications link, to a range of less than or equal to 500 m;
b.Hydrocyanic acid (CAS 74-90-8);
b.‘Propellants’ as follows:
1.Any solid ‘propellant’ with a theoretical specific impulse (under standard conditions) of more than:
a.240 seconds for non-metallized, non-halogenized ‘propellant’;
b.250 seconds for non-metallized, halogenized ‘propellant’; or
c.260 seconds for metallized ‘propellant’;
2.Not used since 2013;
3.‘Propellants’ having a force constant of more than 1200 kJ/kg;
4.‘Propellants’ that can sustain a steady-state linear burning rate of more than 38 mm/s under standard conditions (as measured in the form of an inhibited single strand) of 6,89 MPa (68,9 bar) pressure and 294 K (21 °C);
5.Elastomer Modified Cast Double Base (EMCDB) ‘propellants’ with extensibility at maximum stress of more than 5 % at 233 K (– 40 °C);
6.Any ‘propellant’ containing substances specified by ML8.a.;
7.‘Propellants’, not specified elsewhere in the EU Common Military List, specially designed for military use;
b.Black powder;
b.Compounded or mixed, with non-active thermoset binders or plasticizers, and having a mass of less than 250 g;
b.Engines and propulsion systems, as follows, specially designed for military use and components therefor specially designed for military use:
1.Diesel engines specially designed for submarines;
2.Electric motors specially designed for submarines and having all of the following:
a.Power output of more than 0,75 MW (1000 hp);
b.Quick reversing;
c.Liquid cooled; and
d.Totally enclosed;
3.Diesel engines having all of the following:
a.Power output of 37,3 kW (50 hp) or more; and
b.‘Non-magnetic’ content in excess of 75 % of total mass;
Technical NoteFor the purposes of ML9.b.3., ‘non-magnetic’ means the relative permeability is less than 2.
4.‘Air Independent Propulsion’ (‘AIP’) systems specially designed for submarines;NoteML9.b.4. does not apply to nuclear power.Technical NoteFor the purposes of ML9.b.4., ‘AIP’ allows a submerged submarine to operate its propulsion system, without access to atmospheric oxygen, for a longer time than the batteries would have otherwise allowed.N.B.For nuclear power propulsion equipment, see ML9.h.
b.Not used since 2011;
b.Not configured for military use and not fitted with equipment or attachments specially designed or modified for military use;and
b.Reciprocating engines or specially designed components therefor, except those specially designed for ‘UAVs’.
b.Do not incorporate items specified by the EU Common Military List, unless the items are required to meet safety or airworthiness standards of civil aviation authorities of one or more EU Member States or Wassenaar Arrangement Participating States;and
b.Jamming equipment designed or modified to hinder the reception, operation or effectiveness of positioning, navigation or timing services provided by ‘satellite navigation systems’, and specially designed components therefor;
b.Smooth-bore weapons as follows:
1.Smooth-bore weapons specially designed for military use;
2.Other smooth-bore weapons as follows:
a.Fully automatic type weapons;
a.Smooth-bore weapons manufactured earlier than 1938;
b.Semi-automatic or pump-action type weapons;NoteML1.b.2. does not apply to weapons specially designed to discharge an inert projectile by compressed air or CO2.
b.Reproductions of smooth-bore weapons, the originals of which were manufactured earlier than 1890;
c.Smooth-bore weapons used for hunting or sporting purposes. These weapons must not be specially designed for military use or of the fully automatic firing type;
d.Smooth-bore weapons specially designed for any of the following:
1.Slaughtering of domestic animals;
2.Tranquillizing of animals;
3.Seismic testing;
4.Firing of industrial projectiles;or
5.Disrupting Improvised Explosive Devices (IEDs).N.B.For disruptors, see ML4 and 1A006 on the EU Dual-Use List.
NoteML1.b. does not apply to the following:
b.Specially designed test and evaluation facilities and test models, including diagnostic instrumentation and targets, for dynamic testing of kinetic energy projectiles and systems.
b.Prime power generation, electric armour, energy storage (e.g. high energy storage capacitors), thermal management, conditioning, switching or fuel-handling equipment; and electrical interfaces between power supply, gun and other turret electric drive functions;N.B.For high energy storage capacitors, see also 3A001.e.2. on the EU Dual-Use List.
b.Electrothermal;
b.Constructions of metallic or non-metallic materials, or combinations thereof, specially designed to provide ballistic protection for military systems, and specially designed components therefor;
b.Cameras, photographic equipment and film processing equipment;
b.Construction equipment specially designed for military use;
b.Environmental test facilities specially designed for the certification, qualification or testing of items specified by the EU Common Military List, and specially designed equipment therefor, not specified elsewhere.
b.Particle beam ‘weapon systems’;
b.Particle accelerators which project a charged or neutral particle beam with destructive power;
b.Target acquisition or tracking systems;
b.Projectors, specially designed or modified for military use, as follows:
1.Smoke canister projectors;
2.Gas canister projectors;
3.Pyrotechnics projectors;NoteML2.b. does not apply to signal pistols.
b.‘Superconductive’ electrical equipment (rotating machinery or transformers) specially designed or configured to be installed in a vehicle for military ground, marine, airborne or space applications and capable of operating while in motion.NoteML20.b. does not apply to direct-current hybrid homopolar generators that have single-pole normal metal armatures which rotate in a magnetic field produced by superconducting windings, provided those windings are the only superconducting components in the generator.
b.Specific ‘software’, other than that specified by ML21.a., as follows:
1.‘Software’ specially designed for military use and specially designed for modelling, simulating or evaluating military weapon systems;
2.‘Software’ specially designed for military use and specially designed for modelling or simulating military operational scenarios;
3.‘Software’ for determining the effects of conventional, nuclear, chemical or biological weapons;
4.‘Software’ specially designed for military use and specially designed for Command, Communications, Control and Intelligence (C3I) or Command, Communications, Control, Computer and Intelligence (C4I) applications;
5.‘Software’ specially designed or modified for the conduct of military offensive cyber operations;Note 1ML21.b.5. includes ‘software’ designed to destroy, damage, degrade or disrupt systems, equipment or ‘software’, specified by the EU Common Military List, cyber reconnaissance and cyber command and control ‘software’, therefor.Note 2ML21.b.5. does not apply to ‘vulnerability disclosure’ or to ‘cyber incident response’, limited to non-military defensive cybersecurity readiness or response.
b.‘Technology’ as follows:
1.‘Technology’ ‘required’ for the design of, the assembly of components into, and the operation, maintenance and repair of, complete production installations for items specified by the EU Common Military List, even if the components of such production installations are not specified;
2.‘Technology’ ‘required’ for the ‘development’ and ‘production’ of small arms, even if used to produce reproductions of antique small arms;
3.Not used since 2013N.B.For ‘technology’ previously specified by ML22.b.3., see ML22.a..
4.Not used since 2013N.B.For ‘technology’ previously specified by ML22.b.4., see ML22.a.
5.‘Technology’ ‘required’ exclusively for the incorporation of ‘biocatalysts’, specified by ML7.i.1., into military carrier substances or military material.
b.‘Technology’ that is ‘in the public domain’, ‘basic scientific research’ or the minimum necessary information for patent applications;
b.Fuze setting devices specially designed for ammunition specified by ML3.a.Note 1Specially designed components specified by ML3 include:
a.Metal or plastic fabrications such as primer anvils, bullet cups, cartridge links, rotating bands and munitions metal parts;
a.Ammunition crimped without a projectile (blank star);
a.Signalling;
b.Safing and arming devices, fuzes, sensors and initiation devices;
b.Dummy ammunition with a pierced powder chamber;
b.Bird scaring; or
c.Power supplies with high one-time operational output;
c.Other blank and dummy ammunition, not incorporating components designed for live ammunition;or
c.Lighting of gas flares at oil wells.
d.Combustible cases for charges;
d.Components specially designed for blank or dummy ammunition, specified in this Note 2.a., b. or c.
e.Submunitions including bomblets, minelets and terminally guided projectiles.
Note 2ML3.a. does not apply to any of the following:Note 3ML3.a. does not apply to cartridges specially designed for any of the following purposes:
b.Equipment having all of the following:
1.Specially designed for military use; and
2.Specially designed for ‘activities’ relating to any of the following:
a.Items specified by ML4.a.; or
b.Improvised Explosive Devices (IEDs);Technical NoteFor the purposes of ML4.b.2. ‘activities’ applies to handling, launching, laying, controlling, discharging, detonating, activating, powering with one-time operational output, decoying, jamming, sweeping, detecting, disrupting or disposing.
a.Mobile gas liquefying equipment;
b.Buoyant electric conducting cable suitable for sweeping magnetic mines.
Note 1ML4.b. includes:Note 2ML4.b. does not apply to hand-held devices limited by design solely to the detection of metal objects and incapable of distinguishing between mines and other metal objects.
b.Other fire control, surveillance and warning equipment, and related systems, as follows:
1.Target acquisition, designation, range-finding, surveillance or tracking systems;
2.Detection, recognition or identification equipment;
3.Data fusion or sensor integration equipment;
b.Other ground vehicles and components, as follows:
1.Vehicles having all of the following:
a.Manufactured or fitted with materials or components to provide ballistic protection equal to or better than level III (NIJ 0108.01, September 1985), or ‘equivalent standards’;
b.A transmission to provide drive to both front and rear wheels simultaneously, including those for vehicles having additional wheels for load bearing purposes whether driven or not;
c.Gross Vehicle Weight Rating (GVWR) greater than 4500 kg; and
a.Specially designed for vehicles specified in ML6.b.1.; and
b.Providing ballistic protection equal to or better than level III (NIJ 0108.01, September 1985), or ‘equivalent standards’.
b.Do not have items specified by the EU Common Military List and manufactured after 1945, except for reproductions of original components or accessories for the vehicle;and
b.Chemical warfare (CW) agents, including:
1.CW nerve agents:
a.O-Alkyl (equal to or less than C10, including cycloalkyl) alkyl (Methyl, Ethyl, n-Propyl or Isopropyl) - phosphonofluoridates, such as:
Sarin (GB):O-Isopropyl methylphosphonofluoridate (CAS 107-44-8); and
b.O-Alkyl (equal to or less than C10, including cycloalkyl)
N,N-dialkyl (Methyl, Ethyl, n-Propyl or Isopropyl) phosphoramidocyanidates, such as: Tabun (GA):O-Ethyl
N,N-dimethylphosphoramidocyanidate (CAS 77-81-6);
c.O-Alkyl (H or equal to or less than C10, including cycloalkyl)
S-2-dialkyl (Methyl, Ethyl, n-Propyl or Isopropyl)-aminoethyl alkyl (Methyl, Ethyl, n-Propyl or Isopropyl) phosphonothiolates and corresponding alkylated and protonated salts, such as:
c.Weapons using non-centre fire cased ammunition and which are not of the fully automatic firing type;
c.Hexanitrodiphenylamine (CAS 131-73-7);
c.Having a maximum of 80 % ammonium perchlorate (ML8.d.2.) in mass of active material;
c.Underwater detection devices, specially designed for military use, controls therefor and components therefor specially designed for military use;
c.Unmanned ‘aircraft’ and ‘lighter-than-air vehicles’, and related equipment, as follows, and specially designed components therefor:
1.‘UAVs’, Remotely Piloted Air Vehicles (RPVs), autonomous programmable vehicles and unmanned ‘lighter-than-air vehicles’;
2.Launchers, recovery equipment and ground support equipment;
3.Equipment designed for command or control;
c.Certified for civil use by civil aviation authorities of one or more EU Member States or Wassenaar Arrangement Participating States.
c.Do not incorporate weapons specified by the EU Common Military List, unless inoperable and incapable of being returned to operation.
c.‘Spacecraft’ specially designed or modified for military use, and ‘spacecraft’ components specially designed for military use.
c.Target acquisition, tracking, fire control or damage assessment systems;
c.Plasma;
c.Helmets and specially designed components and accessories therefor, as follows:
1.Helmets manufactured according to military standards or specifications, or comparable national standards;
2.Shells, liners, or comfort pads, specially designed for helmets specified in ML13.c.1.;
3.Add-on ballistic protection elements, specially designed for helmets specified in ML13.c.1.;
N.B.For other military helmet components or accessories, see the relevant EU Common Military List entry.
c.Weapons using caseless ammunition;
c.Image intensifier equipment;
c.Fittings, coatings and treatments, for signature suppression, specially designed for military use;
c.High power Radio-Frequency (RF) ‘weapon systems’;
c.High pulsed power or high average power radio frequency beam transmitters, which produce fields sufficiently intense to disable electronic circuitry at a distant target.
c.Systems capable of assessing target damage, destruction or mission-abort;
c.‘Software’, not specified by ML21.a. or ML21.b., specially designed or modified to enable equipment not specified by the EU Common Military List to perform the military functions of equipment specified by the EU Common Military List.N.B.For general purpose ‘digital computers’ with installed ‘software’ specified by ML21.c., see systems, equipment or components specified by the EU Common Military List.
c.‘Technology’ for magnetic induction for continuous propulsion of civil transport devices.
c.Accessories specially designed for the weapons specified in ML2.a., as follows:
1.Weapon sights and weapon sight mounts, specially designed for military use;
c.Aircraft Missile Protection Systems (AMPS).NoteML4.c. does not apply to AMPS having all of the following:
a.Any of the following missile warning sensors:
1.Passive sensors having peak response between 100-400 nm;or
2.Active pulsed Doppler missile warning sensors;
b.Countermeasures dispensing systems;
c.Flares, which exhibit both a visible signature and an infrared signature, for decoying surface-to-air missiles;and
d.Installed on ‘civil aircraft’ and having all of the following:
1.The AMPS is only operable in a specific ‘civil aircraft’ in which the specific AMPS is installed and for which any of the following has been issued:
a.A civil Type Certificate issued by civil aviation authorities of one or more EU Member States or Wassenaar Arrangement Participating States;or
b.An equivalent document recognised by the International Civil Aviation Organisation (ICAO);
2.The AMPS employs protection to prevent unauthorised access to ‘software’;and
3.The AMPS incorporates an active mechanism that forces the system not to function when it is removed from the ‘civil aircraft’ in which it was installed.
c.Countermeasure equipment for items specified by ML5.a. or ML5.b.;NoteFor the purposes of ML5.c., countermeasure equipment includes detection equipment.
c.Do not incorporate weapons specified in ML1, ML2 or ML4 unless they are inoperable and incapable of discharging a projectile.
c.CW binary precursors and key precursors, as follows:
1.Alkyl (Methyl, Ethyl, n-Propyl or Isopropyl) Phosphonyl Difluorides, such as: DF: Methyl Phosphonyldifluoride (CAS 676-99-3);
2.O-Alkyl (H or equal to or less than C10, including cycloalkyl) O-2-dialkyl (Methyl, Ethyl, n-Propyl or Isopropyl)-aminoethyl alkyl (Methyl, Ethyl, n-Propyl or Isopropyl) phosphonites and corresponding alkylated and protonated salts, such as:QL: O-Ethyl O-2-di-isopropylaminoethyl methylphosphonite (CAS 57856-11-8);
c.‘Pyrotechnics’, fuels and related substances, as follows, and 'mixtures' thereof:
1.‘Aircraft’ fuels specially formulated for military purposes;Note 1ML8.c.1. does not apply to the following ‘aircraft’ fuels:
JP-4,
JP-5, and JP-8.
Note 2‘Aircraft’ fuels specified by ML8.c.1. are finished products, not their constituents.
10.Liquid high energy density fuels not specified in ML8.c.1., as follows:
a.Mixed fuels, that incorporate both solid and liquid fuels (e.g. boron slurry), having a mass-based energy density of 40 MJ/kg or greater;
b.Other high energy density fuels and fuel additives (e.g. cubane, ionic solutions, JP-7, JP-10), having a volume-based energy density of 37,5 GJ per cubic meter or greater, measured at 293 K (20 °C) and one atmosphere (101,325 kPa) pressure;NoteML8.c.10.b. does not apply to fossil refined fuels or biofuels, or fuels for engines certified for use in civil aviation.
11.‘Pyrotechnic’ and pyrophoric materials as follows:
a.‘Pyrotechnic’ or pyrophoric materials specifically formulated to enhance or control the production of radiated energy in any part of the IR spectrum;
b.Mixtures of magnesium, polytetrafluoroethylene (PTFE) and a vinylidene difluoride-hexafluoropropylene copolymer (e.g. MTV);
12.Fuel mixtures, ‘pyrotechnic’ mixtures or ‘energetic materials’, not specified elsewhere in ML8, having all of the following:
a.Containing greater than 0,5 % of particles of any of the following:
1.Aluminium;
2.Beryllium;
3.Boron;
4.Zirconium;
5.Magnesium; or
6.Titanium;
b.Particles specified by ML8.c.12.a. with a size less than 200 nm in any direction; and
c.Particles specified by ML8.c.12.a. with a metal content of 60 % or greater;
Note
2.Alane (aluminium hydride) (CAS 7784-21-6);
3.Boranes, as follows, and their derivatives:
a.Carboranes;
b.Borane homologues, as follows:
1.Decaborane (14) (CAS 17702-41-9);
2.Pentaborane (9) (CAS 19624-22-7);
3.Pentaborane (11) (CAS 18433-84-6);
4.Hydrazine and derivatives, as follows (see also ML8.d.8. and ML.8.d.9. for oxidising hydrazine derivatives):
a.Hydrazine (CAS 302-01-2) in concentrations of 70 % or more;
b.Monomethyl hydrazine (CAS 60-34-4);
c.Symmetrical dimethyl hydrazine (CAS 540-73-8);
d.Unsymmetrical dimethyl hydrazine (CAS 57-14-7);
NoteML8.c.4.a. does not apply to hydrazine ‘mixtures’ specially formulated for corrosion control.
5.Metal fuels, fuel ‘mixtures’ or ‘pyrotechnic’ ‘mixtures’, in particle form whether spherical, atomized, spheroidal, flaked or ground, manufactured from material consisting of 99 % or more of any of the following:
a.Metals as follows and ‘mixtures’ thereof:
1.Beryllium (CAS 7440-41-7) in particle sizes of less than 60 μm;
2.Iron powder (CAS 7439-89-6) with particle size of 3 μm or less produced by reduction of iron oxide with hydrogen;
b.‘Mixtures’ containing any of the following:
1.Zirconium (CAS 7440-67-7), magnesium (CAS 7439-95-4) or alloys of these in particle sizes of less than 60 μm; or
2.Boron (CAS 7440-42-8) or boron carbide (CAS 12069-32-8) fuels of 85 % purity or higher and particle sizes of less than 60 μm;
Note 1ML8.c.5 applies to ‘explosives’ and fuels, whether or not the metals or alloys are encapsulated in aluminium, magnesium, zirconium, or beryllium.Note 2ML8.c.5.b. only applies to metal fuels in particle form when they are mixed with other substances to form a ‘mixture’ formulated for military purposes such as liquid ‘propellant’ slurries, solid ‘propellants’, or ‘pyrotechnic’ ‘mixtures’.
6.Military materials, containing thickeners for hydrocarbon fuels, specially formulated for use in flame throwers or incendiary munitions, such as metal stearates (e.g. octal (CAS 637-12-7)) or palmitates;
7.Perchlorates, chlorates and chromates, composited with powdered metal or other high energy fuel components;
8.Spherical or spheroidal aluminium powder (CAS 7429-90-5) with a particle size of 60 μm or less and manufactured from material with an aluminium content of 99 % or more;
9.Titanium subhydride (TiHn) of stoichiometry equivalent to n = 0,65-1,68;
cc.2,2-dinitropropanol (CAS 918-52-5);
d.‘Deactivated firearms’.
d.Anti-submarine nets and anti-torpedo nets, specially designed for military use;
d.Propulsion aero-engines and specially designed components therefor;
d.Homing seeker, guidance or divert propulsion (lateral acceleration) systems for projectiles.
d.Light gas;or
d.Body armour or protective garments, and components therefor, as follows:
1.Soft body armour or protective garments, manufactured to military standards or specifications, or to their equivalents, and specially designed components therefor;NoteFor the purposes of ML13.d.1., military standards or specifications include, at a minimum, specifications for fragmentation protection.
2.Hard body armour plates providing ballistic protection equal to or greater than level III (NIJ 0101.06, July 2008), or ‘equivalent standards’.
a.Were first manufactured before 1970;and
b.Are neither designed or modified to accept, nor equipped with items specified by the EU Common Military List.
Note 1ML13.b. includes materials specially designed to form explosive reactive armour or to construct military shelters.Note 2ML13.c. does not apply to helmets that meet all of the following:Note 3ML13.c. and ML13.d. do not apply to helmets, body armour or protective garments, when accompanying their user for the user's own personal protection.Note 4The only helmets specially designed for bomb disposal personnel that are specified by ML13.c. are those specially designed for military use.Note 5ML13.d.1. does not apply to protective eyewear.N.B.For ‘laser’ protective eyewear, see ML17.o.
d.Infrared or thermal imaging equipment;
d.Field engineer equipment specially designed for use in a combat zone;
d.Equipment specially designed for the detection or identification of, or defence against, systems specified by ML19.a. to ML19.c.;
d.Beam-handling, propagation or pointing equipment;
d.Accessories designed for arms specified by ML1.a., ML1.b. or ML1.c., as follows:
1.Detachable cartridge magazines;
2.Sound suppressors or moderators;
3.‘Gun-mountings’;Technical NoteFor the purposes of ML1.d.3., a ‘gun-mounting’ is a fixture designed to mount a gun onto a ground vehicle, ‘aircraft’, vessel or structure.
4.Flash suppressors;
5.Optical weapon-sights with electronic image processing;
6.Optical weapon-sights specially designed for military use.
d.Not used since 2019.
d.Field test or alignment equipment, specially designed for items specified by ML5.a., ML5.b. or ML5.c.
d.‘Riot control agents’, active constituent chemicals and combinations thereof, including:
Note 1ML7.d. does not apply to ‘riot control agents’ individually packaged for personal self-defence purposes.Note 2ML7.d. does not apply to active constituent chemicals, and combinations thereof, identified and packaged for food production or medical purposes.
d.Carbonyl chloride (phosgene) (CAS 75-44-5);
d.Oxidisers as follows, and ‘mixtures’ thereof:
1.ADN (ammonium dinitramide or SR 12) (CAS 140456-78-6);
10.Liquid oxidisers comprised of or containing inhibited red fuming nitric acid (IRFNA) (CAS 8007-58-7);NoteML8.d.10. does not apply to non-inhibited fuming nitric acid.
2.AP (ammonium perchlorate) (CAS 7790-98-9);
3.Compounds composed of fluorine and any of the following:
a.Other halogens;
b.Oxygen; or
c.Nitrogen;
Note 1ML8.d.3. does not apply to chlorine trifluoride (CAS 7790-91-2).Note 2ML8.d.3. does not apply to nitrogen trifluoride (CAS 7783-54-2) in its gaseous state.Note 3ML8.d.3. does not apply to iodine pentafluoride (CAS 7783-66-6).
d.Having less than or equal to 4 g of NTO (ML8.a.18.);and
dd.Nitroguanidine (CAS 556-88-7) (see 1C011.d. on the EU Dual-Use List).
e.Equipment, specially designed or modified for military use, designed or modified for the dissemination of any of the following, and specially designed components therefor:
1.Materials or agents specified by ML7.a., ML7.b. or ML7.d.; or
2.CW agents made up of precursors specified by ML7.c.;
e.‘Robots’, ‘robot’ controllers and ‘robot’ ‘end-effectors’, having any of the following characteristics:
1.Specially designed for military use;
2.Incorporating means of protecting hydraulic lines against externally induced punctures caused by ballistic fragments (e.g. incorporating self-sealing lines) and designed to use hydraulic fluids with flash points higher than 839 K (566 °C); or
3.Specially designed or rated for operating in an ‘Electromagnetic Pulse’ (‘EMP’) environment;Technical NoteFor the purposes of ML17.e.3., ‘EMP’ does not refer to unintentional interference caused by electromagnetic radiation from nearby equipment (e.g. machinery, appliances or electronics) or lightning.
e.Physical test models for the systems, equipment and components, specified by ML19;
e.Equipment with rapid beam slew capability for rapid multiple target operations;
11.GAP (glycidylazide polymer) (CAS 143178-24-9) and its derivatives;
12.HTPB (hydroxyl terminated polybutadiene) with a hydroxyl functionality equal to or greater than 2,2 and less than or equal to 2,4, a hydroxyl value of less than 0,77 meq/g, and a viscosity at 30 °C of less than 47 poise (CAS 69102-90-5);
13.Alcohol functionalised poly(epichlorohydrin) with a molecular weight less than 10000, as follows:
a.Poly(epichlorohydrindiol);
b.Poly(epichlorohydrintriol);
14.NENAs (nitratoethylnitramine compounds) (CAS 17096-47-8, 85068-73-1, 82486-83-7, 82486-82-6 and 85954-06-9);
15.PGN (poly-GLYN, polyglycidylnitrate or poly(nitratomethyl oxirane)) (CAS 27814-48-8);
16.Poly-NIMMO (poly (nitratomethylmethyloxetane), poly-NMMO or poly(3-Nitratomethyl-3-methyloxetane)) (CAS 84051-81-0);
17.Polynitroorthocarbonates;
18.TVOPA (1,2,3-tris[1,2-bis(difluoroamino)ethoxy] propane or tris vinoxy propane adduct) (CAS 53159-39-0);
e.Having less than or equal to 1 g of catocene (ML8.f.4.b.).
e.Not used since 2003;
e.Airborne refuelling equipment specially designed or modified for any of the following, and specially designed components therefor:
1.‘Aircraft’ specified by ML10.a.; or
2.Unmanned ‘aircraft’ specified by ML10.c.;
e.Chemical (when used in combination with any of the above).
e.Imaging radar sensor equipment;
f.Protective and decontamination equipment, specially designed or modified for military use, components and chemical mixtures, as follows:
1.Equipment designed or modified for defence against materials specified by ML7.a., ML7.b. or ML7.d., and specially designed components therefor;
2.Equipment designed or modified for decontamination of objects contaminated with materials specified by ML7.a. or ML7.b., and specially designed components therefor;
3.Chemical mixtures specially developed or formulated for the decontamination of objects contaminated with materials specified by ML7.a. or ML7.b.;
a.Air conditioning units specially designed or modified for nuclear, biological or chemical filtration;
b.Protective clothing.
NoteML7.f.1. includes:N.B.For civil gas masks, protective and decontamination equipment, see also 1A004 on the EU Dual-Use List.
f.Adaptive optics and phase conjugators;
f.Not used since 2004;
f.‘Additives’ as follows:Technical NoteFor the purposes of ML8.f., ‘additives’ are substances used in explosive formulations to improve their properties.
1.Basic copper salicylate (CAS 62320-94-9);
10.Lead stannate (CAS 12036-31-6);
11.MAPO (tris-1-(2-methyl)aziridinyl phosphine oxide) (CAS 57-39-6); BOBBA 8 (bis(2-methyl aziridinyl) 2-(2-hydroxypropanoxy) propylamino phosphine oxide); and other MAPO derivatives;
a.Neopentyl[diallyl]oxy, tri[dioctyl]phosphato-titanate (CAS 103850-22-2); also known as titanium IV, 2,2[bis 2-propenolato-methyl, butanolato, tris (dioctyl) phosphato] (CAS 110438-25-0); or LICA 12 (CAS 103850-22-2);
b.Titanium IV, [(2-propenolato-1) methyl, n-propanolatomethyl] butanolato-1, tris[dioctyl] pyrophosphate or KR3538;
c.Titanium IV, [(2-propenolato-1)methyl, n-propanolatomethyl] butanolato-1, tris(dioctyl)phosphate;
b.Polyfunctional aziridine amides with isophthalic, trimesic, isocyanuric or trimethyladipic backbone also having a 2-methyl or 2-ethyl aziridine group;NoteML.8.f.17.b. includes:
c.Ferrocene carboxylic acids and ferrocene carboxylic acid esters;
d.n-butyl-ferrocene (CAS 31904-29-7);
e.Other adducted polymer ferrocene derivatives not specified elsewhere in ML8.f.4.;
f.Ethyl ferrocene (CAS 1273-89-8);
g.Propyl ferrocene;
h.Pentyl ferrocene (CAS 1274-00-6);
i.Dicyclopentyl ferrocene;
j.Dicyclohexyl ferrocene;
5.Lead beta-resorcylate (CAS 20936-32-7) or copper beta-resorcylate (CAS 70983-44-7);
6.Lead citrate (CAS 14450-60-3);
7.Lead-copper chelates of beta-resorcylate or salicylates (CAS 68411-07-4);
8.Lead maleate (CAS 19136-34-6);
9.Lead salicylate (CAS 15748-73-9);
f.Potassium nitrate (CAS 7757-79-1);
f.Hull penetrators and connectors, specially designed for military use, that enable interaction with equipment external to a vessel, and components therefor specially designed for military use;Note 1ML9.f. includes connectors for vessels which are of the single-conductor, multi-conductor, coaxial or waveguide type, and hull penetrators for vessels, both of which are capable of remaining impervious to leakage from without and of retaining required characteristics at marine depths exceeding 100 m; and fibre-optic connectors and optical hull penetrators, specially designed for ‘laser’ beam transmission, regardless of depth.Note 2ML9.f. does not apply to ordinary propulsive shaft and hydrodynamic control-rod hull penetrators.
f.Ground equipment specially designed for ‘aircraft’ specified by ML10.a. or aero-engines specified by ML10.d.;Note 1ML10.f. includes pressure refuelling equipment and equipment designed to facilitate operations in confined areas, including equipment located on board a ship.Note 2ML10.f. does not apply to:
1.Towbars;
2.Protective mats and covers;
3.Ladders, steps and platforms;
4.Chocks, lashings and tie-down equipment.
f.Countermeasure or counter-countermeasure equipment, for the equipment specified by ML15.a. to ML15.e.NoteML15.f. includes equipment designed to degrade the operation or effectiveness of military imaging systems or to minimise such degrading effects.
f.‘Libraries’ specially designed or modified for military use with systems, equipment or components, specified by the EU Common Military List;
f.‘Laser’ systems specially designed to cause permanent blindness to unenhanced vision, i.e. to the naked eye or to the eye with corrective eyesight devices.
g.Equipment, specially designed or modified for military use designed or modified for the detection or identification of materials specified by ML7.a., ML7.b. or ML7.d., and specially designed components therefor;NoteML7.g. does not apply to personal radiation monitoring dosimeters.N.B.See also 1A004 on the EU Dual-Use List.
g.‘Precursors’ as follows:N.B.In ML8.g. the references are to specified ‘Energetic Materials’ manufactured from these substances.
1.BCMO (3,3-bis(chloromethyl)oxetane) (CAS 78-71-7) (see also ML8.e.1. and ML8.e.2.);
2.Dinitroazetidine-t-butyl salt (CAS 125735-38-8) (see also ML8.a.28.);
3.Hexaazaisowurtzitane derivates including HBIW (hexabenzylhexaazaisowurtzitane) (CAS 124782-15-6) (see also ML8.a.4.) and TAIW (tetraacetyldibenzylhexaazaisowurtzitane) (CAS 182763-60-6) (see also ML8.a.4.);
4.Not used since 2013;
5.TAT (1,3,5,7 tetraacetyl-1,3,5,7,-tetraaza cyclo-octane) (CAS 41378-98-7) (see also ML8.a.13.);
6.1,4,5,8-tetraazadecalin (CAS 5409-42-7) (see also ML8.a.27.);
7.1,3,5-trichlorobenzene (CAS 108-70-3) (see also ML8.a.23.);
8.1,2,4-trihydroxybutane (1,2,4-butanetriol) (CAS 3068-00-6) (see also ML8.e.5.);
9.DADN (1,5-diacetyl-3,7-dinitro-1, 3, 5, 7-tetraaza-cyclooctane) (see also ML8.a.13);
g.Tetranitronaphthalene;
g.Silent bearings having any of the following, components therefor and equipment containing those bearings, specially designed for military use:
1.Gas or magnetic suspension;
2.Active signature controls; or
3.Vibration suppression controls;
g.Aircrew life support equipment, aircrew safety equipment and other devices for emergency escape, not specified in ML10.a., designed for ‘aircraft’ specified by ML10.a. or ‘sub-orbital craft’ specified in ML10.j.;NoteML10.g. does not apply to aircrew helmets that do not incorporate, or have mountings or fittings for, equipment specified in the EU Common Military List.N.B.For helmets see also ML13.c.
g.Nuclear power generating equipment or propulsion equipment, not specified elsewhere, specially designed for military use and components therefor specially designed or ‘modified’ for military use;NoteML17.g. includes ‘nuclear reactors’.
g.Current injectors for negative hydrogen ion beams;
h.‘Biopolymers’ specially designed or processed for the detection or identification of CW agents specified by ML7.b., and the cultures of specific cells used to produce them;Technical NotesFor the purposes of ML7.h.:
1.‘Biopolymers’ are biological macromolecules as follows:
a.Enzymes for specific chemical or biochemical reactions;
b.‘Anti-idiotypic’, ‘monoclonal’ or ‘polyclonal’ ‘antibodies’;
c.Specially designed or specially processed ‘receptors’;
2.‘Anti-idiotypic antibodies’ means antibodies which bind to the specific antigen binding sites of other antibodies;
3.‘Monoclonal antibodies’ means proteins which bind to one antigenic site and are produced by a single clone of cells;
4.‘Polyclonal antibodies’ means a mixture of proteins which bind to the specific antigen and are produced by more than one clone of cells;
5.‘Receptors’ means biological macromolecular structures capable of binding ligands, the binding of which affects physiological functions.
h.Benzyl bromide (CAS 100-39-0);
h.‘Reactive material’ powders and shapes, as follows:
1.Powders of any of the following materials, with a particle size less than 250 μm in any direction and not specified elsewhere by ML8:
a.Aluminium;
b.Niobium;
c.Boron;
d.Zirconium;
e.Magnesium;
f.Titanium;
g.Tantalum;
h.Tungsten;
i.Molybdenum; or
j.Hafnium;
2.Shapes, not specified by ML3, ML4, ML12 or ML16, fabricated from powders specified by ML8.h.1.Technical NotesFor the purposes of ML8.h.:
1.‘Reactive materials’ are designed to produce an exothermic reaction only at high shear rates and for use as liners or casings in warheads.
2.‘Reactive material’ powders are produced by, for example, a high energy ball milling process.
3.‘Reactive material’ shapes are produced by, for example, selective laser sintering.
h.Trinitroanisol;
h.Nuclear power generating equipment or propulsion equipment, specially designed for vessels specified in ML9.a. and components therefor specially designed or 'modified' for military use.Technical NoteFor the purposes of ML9.h., ‘modified’ means any structural, electrical, mechanical, or other change that provides a non-military item with military capabilities equivalent to an item which is specially designed for military use.NoteML9.h. includes ‘nuclear reactors’.
h.Parachutes, paragliders and related equipment, as follows, and specially designed components therefor:
1.Parachutes not specified elsewhere in the EU Common Military List;
2.Paragliders;
3.Equipment specially designed for high altitude parachutists (e.g. suits, special helmets, breathing systems, navigation equipment);
h.Equipment and material, coated or treated for signature suppression, specially designed for military use, not specified elsewhere in the EU Common Military List;
h.‘Space-qualified’ accelerator components;
i.‘Biocatalysts’ for the decontamination or degradation of CW agents, and biological systems therefor, as follows:
1.‘Biocatalysts’ specially designed for the decontamination or degradation of CW agents specified by ML7.b., and resulting from directed laboratory selection or genetic manipulation of biological systems;
2.Biological systems containing the genetic information specific to the production of ‘biocatalysts’ specified by ML7.i.1., as follows:
a.‘Expression vectors’;Technical NoteFor the purposes of ML7.i.2.a., ‘expression vectors’ are carriers (e.g. plasmid or virus) used to introduce genetic material into host cells.
b.Viruses;
c.Cultures of cells.
i.Benzyl iodide (CAS 620-05-3);
i.Trinitronaphthalene;
i.Controlled opening equipment or automatic piloting systems, designed for parachuted loads.
i.Simulators specially designed for military ‘nuclear reactors’;
i.Negative ion beam funnelling equipment;
j.Bromo acetone (CAS 598-31-2);
j.Trinitroxylene;
j.‘Sub-orbital craft’ and related equipment, as follows, and specially designed or modified components therefor:
1.‘Sub-orbital craft’;
2.Launch equipment, recovery equipment and ground support equipment;
3.Equipment designed for command or control.
j.Mobile repair shops specially designed or ‘modified’ to service military equipment;
j.Equipment for controlling and slewing a high energy ion beam;
k.Field generators specially designed or ‘modified’ for military use;
k.‘Space-qualified’ foils for neutralising negative hydrogen isotope beams.
l.Bromo methylethylketone (CAS 816-40-0);
l.Dioctylmaleate (CAS 142-16-5);
l.ISO intermodal containers or demountable vehicle bodies (i.e. swap bodies), specially designed or ‘modified’ for military use;
m.Chloro acetone (CAS 78-95-5);
m.Ethylhexylacrylate (CAS 103-11-7);
m.Ferries, not specified elsewhere in the EU Common Military List, bridges and pontoons, specially designed for military use;
n.Ethyl iodoacetate (CAS 623-48-3);
n.Triethylaluminium (TEA) (CAS 97-93-8), trimethylaluminium (TMA) (CAS 75-24-1), and other pyrophoric metal alkyls and aryls of lithium, sodium, magnesium, zinc or boron;
n.Test models specially designed for the ‘development’ of items specified by ML4, ML6, ML9 or ML10;
o.Iodo acetone (CAS 3019-04-3);
o.Nitrocellulose (CAS 9004-70-0);
o.‘Laser’ protection equipment (e.g. eye or sensor protection) specially designed for military use;
t.Lead azide (CAS 13424-46-9), normal lead styphnate (CAS 15245-44-0) and basic lead styphnate (CAS 12403-82-6), and primary explosives or priming compositions containing azides or azide complexes;
Technical NoteFor the purposes of ML1. Note d., a ‘deactivated firearm’ is a firearm that has been made incapable of firing any projectile by processes defined by the national authority of the EU Member State or the Wassenaar Arrangement Participating State. These processes irreversibly modify the essential elements of the firearm. According to national laws and regulations, deactivation of the firearm may be attested by a certificate delivered by a competent authority and may be marked on the firearm by a stamp on an essential part.ML2Smooth-bore weapons with a calibre of 20 mm or more, other weapons or armament with a calibre greater than 12,7 mm (calibre 0,50 inches), projectors specially designed or modified for military use and accessories, as follows, and specially designed components therefor:ML3Ammunition and fuze setting devices, as follows, and specially designed components therefor:ML4Bombs, torpedoes, rockets, missiles, other explosive devices and charges and related equipment and accessories, as follows, and specially designed components therefor:N.B.1.For guidance and navigation equipment, see ML11.N.B.2.For Aircraft Missile Protection Systems (AMPS), see ML4.c.ML5Fire control, surveillance and warning equipment, and related systems, test and alignment and countermeasure equipment, as follows, specially designed for military use, and specially designed components and accessories therefor:ML6Ground vehicles and components, as follows:N.B.For guidance and navigation equipment, see ML11.N.B.See also ML13.a.Note 1ML6 does not apply to civil vehicles designed or modified for transporting money or valuables.Note 2ML6 does not apply to vehicles that meet all of the following;ML7Chemical agents, ‘biological agents’, ‘riot control agents’, radioactive materials, related equipment, components and materials, as follows:Note 1ML7.b. and ML7.d. do not apply to the following:Note 2The cultures of cells and biological systems specified by ML7.h. and ML7.i.2. are exclusive and these sub-items do not apply to cells or biological systems for civil purposes, such as agricultural, pharmaceutical, medical, veterinary, environmental, waste management, or in the food industry.ML8‘Energetic materials’ and related substances, as follows:N.B.1.See also 1C011 on the EU Dual-Use List.N.B.2.For charges and devices, see ML4 and 1A008 on the EU Dual-Use List.NoteAny substance listed in the ML8 sub-items is subject to this list, even when utilised in an application other than that indicated (e.g. TAGN is predominantly used as an explosive but can also be used either as a fuel or an oxidiser).Technical NotesNote 1ML8 does not apply to the following substances unless they are compounded or mixed with the ‘energetic material’ specified by ML8.a. or powdered metals specified by ML8.c.:Note 2ML8 does not apply to ammonium perchlorate (ML8.d.2.), NTO (ML8.a.18.) or catocene (ML8.f.4.b.), and meeting all of the following:ML9Vessels of war (surface or underwater), special naval equipment, accessories, components and other surface vessels, as follows:N.B.For guidance and navigation equipment, see ML11.ML10‘Aircraft’, ‘lighter-than-air vehicles’, ‘Unmanned Aerial Vehicles’ (‘UAVs’), aero-engines, ‘sub-orbital craft’ and ‘aircraft’ equipment, related equipment, and components, as follows, specially designed or modified for military use:N.B.For guidance and navigation equipment, see ML11.Note 1ML10.a. does not apply to ‘aircraft’ and ‘lighter-than-air vehicles’ or variants of those ‘aircraft’, specially designed for military use and which are all of the following:Note 2ML10.d. does not apply to:Note 3For the purposes of ML10.a., ML10.d. and ML10.j., specially designed components and related equipment for non-military ‘aircraft’, aero-engines or ‘sub-orbital craft’ modified for military use applies only to those military components and to military related equipment required for the modification to military use.Note 4For the purposes of ML10.a. and ML10.j., military use includes: combat, military reconnaissance, assault, military training, logistics support, and transporting and airdropping troops or military equipment.Note 5ML10.a. does not apply to ‘aircraft’ or ‘lighter-than-air vehicles’ that meet all of the following:Note 6ML10.d. does not apply to propulsion aero-engines that were first manufactured before 1946.ML11Electronic equipment, ‘spacecraft’ and components, not specified elsewhere on the EU Common Military List, as follows:ML12High velocity kinetic energy weapon systems and related equipment, as follows, and specially designed components therefor:N.B.For weapon systems using sub-calibre ammunition or employing solely chemical propulsion, and ammunition therefor, see ML1 to ML4.Note 1ML12 includes the following when specially designed for kinetic energy weapon systems:Note 2ML12 applies to weapon systems using any of the following methods of propulsion:ML13Armoured or protective equipment, constructions, components, and accessories, as follows:N.B. 1See also entry 1A005 on the EU Dual-Use List.N.B. 2For ‘fibrous or filamentary materials’ used in the manufacture of body armour and helmets, see entry 1C010 on the EU Dual-Use List.ML14‘Specialised equipment for military training’ or for simulating military scenarios, simulators specially designed for training in the use of any firearm or weapon specified by ML1 or ML2, and specially designed components and accessories therefor.Note 1ML14 includes image generating and interactive environment systems for simulators, when specially designed or modified for military use.Note 2ML14 does not apply to equipment specially designed for training in the use of hunting or sporting weapons.Note 3‘Specialised equipment for military training’ includes military types of attack trainers, operational flight trainers, radar target trainers, radar target generators, gunnery training devices, anti-submarine warfare trainers, flight simulators (including human-rated centrifuges for pilot/astronaut training), radar trainers, instrument flight trainers, navigation trainers, missile launch trainers, target equipment, drone ‘aircraft’, armament trainers, pilotless ‘aircraft’ trainers, mobile training units and training equipment for ground military operations.ML15Imaging or countermeasure equipment, as follows, specially designed for military use, and specially designed components and accessories therefor:NoteML15 does not apply to ‘first generation image intensifier tubes’ or equipment specially designed to incorporate ‘first generation image intensifier tubes’.N.B.For weapon sights incorporating ‘first generation image intensifier tubes’ see ML1, ML2 and ML5.a.N.B.See also 6A002.a., 6A002.b. and 6A003.b. on the EU Dual-Use List.ML16Forgings, castings and other unfinished products, specially designed for items specified by ML1 to ML4, ML6, ML9, ML10, ML12 or ML19.NoteML16 applies to unfinished products when they are identifiable by material composition, geometry or function.ML17Miscellaneous equipment, materials and ‘libraries’, as follows, and specially designed components therefor:Technical NoteML18‘Production’ equipment, environmental test facilities and components, as follows:Technical NoteFor the purposes of ML18, the term ‘production’ includes design, examination, manufacture, testing and checking.ML19Directed Energy Weapon (DEW) systems, related or countermeasure equipment and test models, as follows, and specially designed components therefor:Note 1DEW systems specified by ML19 include systems whose capability is derived from the controlled application of:Note 2ML19 includes the following when specially designed for DEW systems:Technical NoteFor the purposes of ML19, ‘weapon systems’ are designed to damage, destroy or effect mission abort of a target.ML20Cryogenic and ‘superconductive’ equipment, as follows, and specially designed components and accessories therefor:ML21‘Software’ as follows:ML22‘Technology’ as follows:Note 1‘Technology’ ‘required’ for the ‘development’, ‘production’, operation, installation, maintenance (checking), repair, overhaul or refurbishing of items specified by the EU Common Military List remains under control even when applicable to any item not specified by the EU Common Military List.Note 2ML22 does not apply to:
The following are definitions of the terms used in this List, in alphabetical order.
Note 1Definitions apply throughout the List. The references are purely advisory and have no effect on the universal application of defined terms throughout the List.Note 2Words and terms contained in this List of Definitions only take the defined meaning where this is indicated by their being enclosed in ‘double quotations marks’. Elsewhere, words and terms take their commonly accepted (dictionary) meanings, unless a local definition for a particular control is given.
ML1, 8, 10, 14‘Aircraft’A fixed wing, swivel wing, rotary wing (helicopter), tilt rotor or tilt-wing airborne vehicle.ML22‘Basic scientific research’Experimental or theoretical work undertaken principally to acquire new knowledge of the fundamental principles of phenomena or observable facts, not primarily directed towards a specific practical aim or objective.ML7, 22‘Biocatalysts’‘Enzymes’ for specific chemical or biochemical reactions or other biological compounds which bind to and accelerate the degradation of CW agents.Technical Note‘Enzymes’ means ‘biocatalysts’ for specific chemical or biochemical reactions.ML7‘Biological agents’Pathogens or toxins, selected or modified (such as altering purity, shelf life, virulence, dissemination characteristics, or resistance to UV radiation) to produce casualties in humans or animals, degrade equipment or damage crops or the environment.ML4, 10‘Civil aircraft’Those ‘aircraft’ listed by designation in published airworthiness certification lists by civil aviation authorities of one or more EU Member States or Wassenaar Arrangement Participating States to fly commercial civil internal and external routes or for legitimate civil, private or business use.ML21‘Cyber incident response’The process of exchanging necessary information on a cybersecurity incident with individuals or organisations responsible for conducting or coordinating remediation to address the cybersecurity incident.ML17 21, 22‘Development’Is related to all stages prior to serial production, such as: design, design research, design analyses, design concepts, assembly and testing of prototypes, pilot production schemes, design data, process of transforming design data into a product, configuration design, integration design, layouts.ML21‘Digital computer’Equipment which can, in the form of one or more discrete variables, perform all of the following:
1.Manipulation mechanisms which are only manually/teleoperator controllable;
1.‘Technical data’ may take forms such as blueprints, plans, diagrams, models, formulae, algorithms, tables, engineering designs and specifications, manuals and instructions written or recorded on other media or devices such as disk, tape, read-only memories.
2.Fixed sequence manipulation mechanisms which are automated moving devices, operating according to mechanically fixed programmed motions. The programme is mechanically limited by fixed stops, such as pins or cams. The sequence of motions and the selection of paths or angles are not variable or changeable by mechanical, electronic or electrical means;
2.‘Technical assistance’ may take forms such as instruction, skills, training, working knowledge, consulting services. ‘Technical assistance’ may involve transfer of ‘technical data’.
3.Mechanically controlled variable sequence manipulation mechanisms which are automated moving devices, operating according to mechanically fixed programmed motions. The programme is mechanically limited by fixed, but adjustable, stops, such as pins or cams. The sequence of motions and the selection of paths or angles are variable within the fixed programme pattern. Variations or modifications of the programme pattern (e.g. changes of pins or exchanges of cams) in one or more motion axes are accomplished only through mechanical operations;
4.Non-servo-controlled variable sequence manipulation mechanisms which are automated moving devices, operating according to mechanically fixed programmed motions. The programme is variable but the sequence proceeds only by the binary signal from mechanically fixed electrical binary devices or adjustable stops;
5.Stacker cranes defined as Cartesian coordinate manipulator systems manufactured as an integral part of a vertical array of storage bins and designed to access the contents of those bins for storage or retrieval.
a.Accept data;
a.Continuous monofilaments;
a.Is multifunctional;
a.Operate above the stratosphere;
b.Store data or instructions in fixed or alterable (writable) storage devices;
b.Continuous yarns and rovings;
b.Is capable of positioning or orienting material, parts, tools or special devices through variable movements in three-dimensional space;
b.Only perform non-orbital trajectories; and
c.Process data by means of a stored sequence of instructions which is modifiable; and
c.Tapes, fabrics, random mats and braids;
c.Incorporates three or more closed or open loop servo-devices which may include stepping motors; and
c.Land back on Earth with the people or cargo intact.
d.Provide output of data.
d.Chopped fibres, staple fibres and coherent fibre blankets;
d.Has ‘user-accessible programmability’ by means of the teach/playback method or by means of an electronic computer which may be a programmable logic controller, i.e. without mechanical intervention.‘User-accessible programmability’ refers to the facility allowing a user to insert, modify or replace ‘programs’ by means other than:
a.A physical change in wiring or interconnections; or
b.The setting of function controls including entry of parameters.
e.Whiskers, either monocrystalline or polycrystalline, of any length;
f.Aromatic polyamide pulp.
Technical NoteModifications of a stored sequence of instructions include replacement of fixed storage devices, but not a physical change in wiring or interconnections.ML17‘End-effectors’Grippers, ‘active tooling units’ and any other tooling that is attached to the baseplate on the end of a ‘robot’ manipulator arm.Technical Note‘Active tooling units’ are devices for applying motive power, process energy or sensing to a workpiece.ML8‘Energetic materials’Substances or mixtures that react chemically to release energy required for their intended application. ‘Explosives’, ‘pyrotechnics’ and ‘propellants’ are subclasses of energetic materials.ML6, 13‘Equivalent standards’Comparable national or international standards recognised by one or more EU Member States or Wassenaar Arrangement Participating States and applicable to the relevant entry.ML8, 18‘Explosives’Solid, liquid or gaseous substances or mixtures of substances which, in their application as primary, booster, or main charges in warheads, demolition and other applications, are required to detonate.ML13‘Fibrous or filamentary materials’Include:ML15‘First generation image intensifier tubes’Electrostatically focused tubes, employing input and output fibre optic or glass face plates, multi-alkali photocathodes (S-20 or S-25), but not microchannel plate amplifiers.ML17‘Fuel cell’An electrochemical device that converts chemical energy directly into Direct Current (DC) electricity by consuming fuel from an external source.ML22‘In the public domain’This means ‘technology’ or ‘software’ which has been made available without restrictions upon its further dissemination.Note:Copyright restrictions do not remove
An item that produces spatially and temporally coherent light through amplification by stimulated emission of radiation.ML17
‘Library’ (parametric technical database)
A collection of technical information, reference to which may enhance the performance of relevant systems, equipment or components.ML10
‘Lighter-than-air vehicles’
Balloons and ‘airships’ that rely on hot air or on lighter-than-air gases such as helium or hydrogen for their lift.
Technical Note
‘Airship’
A power-driven airborne vehicle that is kept buoyant by a body of gas (usually helium, formerly hydrogen) which is lighter than air.ML9, 17
‘Nuclear reactor’
Includes the items within or attached directly to the reactor vessel, the equipment which controls the level of power in the core, and the components which normally contain or come into direct contact with or control the primary coolant of the reactor core.ML8
‘Precursors’
Speciality chemicals used in the manufacture of explosives.ML 21, 22
Means all production stages, such as: product engineering, manufacture, integration, assembly (mounting), inspection, testing, quality assurance.ML8
‘Propellants’
Substances or mixtures that react chemically to produce large volumes of hot gases at controlled rates to perform mechanical work.ML4, 8
‘Pyrotechnic(s)’
Mixtures of solid or liquid fuels and oxidizers which, when ignited, undergo an energetic chemical reaction at a controlled rate intended to produce specific time delays, or quantities of heat, noise, smoke, visible light or infrared radiation. Pyrophorics are a subclass of pyrotechnics, which contain no oxidizers but ignite spontaneously on contact with air.ML22
‘Required’
As applied to ‘technology’, refers to only that portion of ‘technology’ which is peculiarly responsible for achieving or exceeding the controlled performance levels, characteristics or functions. Such ‘required’ ‘technology’ may be shared by different products.ML7
‘Riot control agents’
Substances which, under the expected conditions of use for riot control purposes, produce rapidly in humans sensory irritation or disabling physical effects which disappear within a short time following termination of exposure. (Tear gases are a subset of ‘riot control agents’.)
ML17
‘Robot’
A manipulation mechanism, which may be of the continuous path or of the point-to-point variety, may use sensors, and has all the following characteristics:
Note
The above definition does not include the following devices:
ML11
‘Satellite navigation system’
A system consisting of ground stations, a constellation of satellites, and receivers, that enables receiver locations to be calculated on the basis of signals received from the satellites. It includes Global Navigation Satellite Systems and Regional Navigation Satellite Systems.
Technical Note 1
‘Satellite’
A ‘spacecraft’, other than a ‘space vehicle’, designed to operate in orbit around Earth or another celestial body; ‘satellites’ include orbital space stations.
Technical Note 2
‘Spacecraft’
A craft designed to operate in, persist in or transit through space in the form of a ‘satellite’, ‘space probe’, or ‘space vehicle’.
Technical Note 3
‘Space vehicle’
A ‘spacecraft’ designed to provide transport for cargo or passengers.
Note:‘Space vehicles’ include craft designed to safely return to Earth.
Technical Note 4
‘Space probe’
A ‘spacecraft’ other than a ‘satellite’ or ‘space vehicle’, designed not to return to Earth.ML4, 11, 21
‘Software’
A collection of one or more ‘programs’ or ‘microprograms’ fixed in any tangible medium of expression.
Technical Note 1
‘Program’
A sequence of instructions to carry out a process in, or convertible into, a form executable by an electronic computer.
Technical Note 2
‘Microprogram’
A sequence of elementary instructions maintained in a special storage, the execution of which is initiated by the introduction of its reference instruction into an instruction register.ML19
‘Space-qualified’
Designed, manufactured, or qualified through successful testing, for operation at altitudes greater than 100 km above the surface of the Earth.NoteA determination that a specific item is ‘space- qualified’ by virtue of testing does not mean that other items in the same production run or model series are ‘space-qualified’ if not individually tested.
ML10
‘Sub-orbital craft’
A craft having an enclosure designed for the transport of people or cargo, which is designed to:
ML20
‘Superconductive’
Refers to materials, (i.e. metals, alloys or compounds) which can lose all electrical resistance (i.e. which can attain infinite electrical conductivity and carry very large electrical currents without Joule heating).
‘Critical temperature’ (sometimes referred to as the transition temperature) of a specific ‘superconductive’ material is the temperature at which the material loses all resistance to the flow of direct electrical current.
Technical Note
The ‘superconductive’ state of a material is individually characterised by a ‘critical temperature’, a critical magnetic field, which is a function of temperature, and a critical current density which is, however, a function of both magnetic field and temperature.Note:‘Critical temperatures’ (sometimes referred to as the transition temperature) of a specific ‘supercondutive’ material is the temperature at which the material loses all resistance to the flow of direct electrical current.
ML22
‘Technology’
Specific information necessary for the ‘development’, ‘production’ or ‘use’ of a product. The information takes the form of ‘technical data’ or ‘technical assistance’. Specified ‘technology’ for the EU Common Military List is defined in ML22.
Technical Notes
ML10
‘Unmanned aerial vehicle’ (‘UAV’)
Any ‘aircraft’ capable of initiating flight and sustaining controlled flight and navigation without any human presence on board.ML21
‘Vulnerability disclosure’
The process of identifying, reporting or communicating a vulnerability to, or analysing a vulnerability with, individuals or organisations responsible for conducting or coordinating remediation for the purpose of resolving the vulnerability.