1.This Directive, which is the ninth individual Directive within the meaning of Article 16 (1) of Directive 89/391/EEC, lays down minimum requirements for the provision of safety and/or health signs at work.
2.This Directive shall not apply to signs for the placing on the market of hazardous substances and mixtures, products and/or equipment, unless other Union provisions make specific reference thereto.
3.This Directive shall not apply to signs used for regulating road, rail, inland waterway, sea or air transport.
4.The provisions of Directive 89/391/EEC shall apply in full to the whole area referred to in paragraph 1, without prejudice to more stringent and/or specific provisions in this Directive.
(a)safety and/or health signs means signs referring to a specific object, activity or situation and providing information or instructions about safety and/or health at work by means of a signboard, a colour, an illuminated sign or acoustic signal, a verbal communication or a hand signal, as the case may be;
(b)prohibition sign means a sign prohibiting behaviour likely to incur or cause danger;
(c)warning sign means a sign giving warning of a hazard or danger;
(d)mandatory sign means a sign prescribing specific behaviour;
(e)emergency escape or first-aid sign means a sign giving information on emergency exits or first-aid or rescue facilities;
(f)information sign means a sign providing information other than that referred to in (b) to (e);
(g)signboard means a sign which provides specific information by a combination of a geometric shape, colours and a symbol or pictogram and which is rendered visible by lighting of sufficient intensity;
(h)supplementary signboard means a signboard used together with one of the signs described under (g), which provides supplementary information;
(i)safety colour means a colour to which a specific meaning is assigned;
(j)Symbol or pictogram means a figure which describes a situation or prescribes specific behaviour and which is used on a signboard or illuminated surface;
(k)illuminated sign means a sign produced by a device made of transparent or translucent materials which are illuminated from the inside or the rear in such a way as to give the appearance of a luminous surface;
(l)acoustic signal means a coded sound signal which is released and transmitted by a device designed for that purpose, without the use of a human or artificial voice;
(m)verbal communication means a predetermined spoken message communicated by a human or artificial voice;
(n)hand signal a movement and/or position of the arms and/or hands, in coded form, for guiding persons who are carrying out manoeuvres which constitute a hazard or danger for workers.
1.Employers shall provide safety and/or health signs as laid down in this Directive where hazards cannot be avoided or adequately reduced by techniques for collective protection or measures, methods or procedures used in the organization of work, or ensure that such signs are in place.Employers shall take into account any risk evaluation made in accordance with Article 6 (3) (a) of Directive 89/391/EEC.
2.Without prejudice to the provisions of Annex V, the signs used for road, rail, inland waterway, sea and air transport shall be installed, wherever appropriate for such forms of transport, inside undertakings and/or firms.
Article 4Safety and/or health signs used for the first time#
Without prejudice to Article 6, a safety and/or health sign used at work for the first time on or after the date referred to in Article 11(1) first subparagraph must fulfil the minimum requirements set out in Annexes I to IX.
Article 5Safety and/or health signs already in use#
The Commission is empowered to adopt delegated acts in accordance with Article 9a to make strictly technical amendments to the Annexes, in order to take account of technical harmonisation and standardisation concerning the design and manufacture of safety and/or health signs or devices at work, as well as technical progress, changes in international regulations or specifications and advances in knowledge in the field of safety and/or health signs or devices at work.Where, in duly justified and exceptional cases involving imminent, direct and serious risks to workers’ and other persons’ physical health and safety, imperative grounds of urgency require action in a very short timeframe, the procedure provided for in Article 9b shall apply to delegated acts adopted pursuant to this Article.
1.The power to adopt delegated acts is conferred on the Commission subject to the conditions laid down in this Article.
2.The power to adopt delegated acts referred to in Article 9 shall be conferred on the Commission for a period of five years from 26 July 2019. The Commission shall draw up a report in respect of the delegation of power not later than nine months before the end of the five-year period. The delegation of power shall be tacitly extended for periods of an identical duration, unless the European Parliament or the Council opposes such extension not later than three months before the end of each period.
Where health and/or safety signs are required by the general rule in Article 3 of the Directive, they must conform to the specific requirements in Annexes II to IX.
1.2.
This Annex introduces those requirements, describes the different uses of safety and/or health signs, and gives general rules on the interchanging and combining of signs.
1.3.
Health and/or safety signs must be used only to convey the message or information specified in the Directive.
1.1.The shape and colours of signboards are set out in section 3, in accordance with their specific object (signboards indicating a prohibition, a warning, a mandatory action, an escape route, an emergency or fire-fighting equipment).
1.2.Pictograms must be as simple as possible and should contain only essential details.
1.3.The pictograms used may be slightly different from or more detailed than those shown in section 3, provided that they convey the same meaning and that no difference or adaptation obscures the meaning.
1.4.Signboards are to be made of shock and weather-resistant material suitable for the surrounding environment.
1.5.The dimensions and colorimetric and photometric features of signoboards must be such that they can be easily seen and understood.
1.Containers used at work for chemical substances or mixtures classified as hazardous according to the criteria for any physical or health hazard class in accordance with Regulation (EC) No 1272/2008, and containers used for the storage of such hazardous substances or mixtures, together with the visible pipes containing or transporting such hazardous substances and mixtures, must be labelled with the relevant hazard pictograms in accordance with that Regulation.The first paragraph does not apply to containers used at work for brief periods nor to containers whose contents change frequently, provided that alternative adequate measures are taken, in particular for information and/or training, which guarantee the same level of protection.The labels referred to in the first paragraph may be:
—replaced by warning signs set out in Annex II, using the same pictograms or symbols. If there is no equivalent warning sign in Section 3.2 of Annex II, the relevant hazard pictogram set out in Annex V of Regulation (EC) No 1272/2008 must be used,
—supplemented by additional information, such as the name and/or formula of the hazardous substance or mixture and the details of the hazard,
—for the transporting of containers at the place of work, supplemented or replaced by signs that are applicable throughout the Union for the transport of hazardous substances or mixtures.
This Annex applies to equipment used exclusively for fire-fighting purposes.
2.
Fire-fighting equipment must be identified by using a specific colour for the equipment and placing a location signboard, and/or by using a specific colour for the places where such equipment is kept, or their access points.
3.
The colour for identifying this equipment is red.
The red area must be sufficiently large to allow the equipment to be identified easily.
4.
The signboards provided for in section 3.5 of Annex Ii must be used to mark the locations of this equipment.
1.1.Places where there is a risk of colliding with obstacles, of falling or of objects falling should be marked with alternating yellow and black, or red and white stripes in built-up zones in the undertaking to which workers have access during their work.
1.2.The dimensions of the markings must be commensurate with the scale of the obstacle or dangerous location in question.
1.3.The yellow and black or red and white stripes must be at an angle of approximately 45 ° and of more or less equal size.
2.1.Where the use and equipment of rooms so requires for the protection of workers, traffic routes for vehicles must be clearly identified by continous stripes in a clearly visible colour, preferably white or yellow, taking into account the colour of the ground.
1.1.The light emitted by a sign must produce a luminous contrast which is appropriate to its environment, in accordance with the intended conditions of use of the sign, but without producing glare for an excessive amount of light or poor visibility as a result of insufficient light.
1.2.The luminous area emitting a sign may be of a single colour or contain a pictogram on a specified background.
1.3.The single colour must correspond to the table of colours and their meanings set out in section 4 of Annex I.
1.4.Likewise, when the sign contains a pictogram, the latter must comply with all the relevant rules set out in Annex II.
2.1.If a device can emit both continuous and intermittent signs, the intermittent sign should be used to indicate a higher level of danger or a more urgent need for the requested/imposed intervention or action than is indicated by the continuous sign.The duration of each flash and the frequency of the flashers of an intermittent illuminated sign must be such as to
(a)have a sound level which is considerably higher than the level of ambient noise, so that it is audible without being excessive or painful;
(b)be easily recognizable, particularly in terms of pulse length and the interval between pulses or groups of pulses, and be clearly distinct from any other acoustic signal and ambient noises.
1.2.If a device can emit an acoustic signal at variable and constant frequencies, the variable frequency should be used to indicate a higher level of danger or a more urgent need for the requested/imposed intervention or action in relation to the stable frequency.
1.1.Verbal communication between a speaker or emitter and one or more hearers is to take the form of (sometimes coded) short texts, phrases, groups of words and/or individual words.
1.2.Spoken messages are to be as short, simple and clear as possible; the verbal skills of the speaker and the hearing abilities of the hearer(s) must be such as to ensure reliable verbal communication.
1.3.Verbal communication is direct (by means of the human voice) or indirect (by means of a human or artificial voice which is broadcast by whatever means is appropriate).
2.1.The persons involved must have a good knowledge of the language used so that they are able to pronounce and understand the spoken message correctly and consequently behave in a way which is appropriate to health and/or safety.
2.2.If verbal communication is used instead of — or together with — gestures, code words should be used such as:
Hand signals must be precise, simple, expansive, easy to make and to understand, and clearly distinct from other such signals.
Where both arms are used at the same time, they must be moved symmetrically and for giving one sign only.
Provided that they fulfil the conditions given above, the signals used may vary slightly from or be more detailed than those shown in section 3; they must, however, be equally meaningful and comprehensible.
The person giving the signs, hereinafter referred to as the ‘signalman’, will use arm/hand movements to give manoeuvring instructions to the person receiving the signs, hereinafter referred to as the (operator).
Without prejudice to Article 6, a safety and/or health sign which was already in use at work before the date referred to in Article 11(1) first subparagraph must fulfil the minimum requirements set out in Annexes I to IX by no later than eighteen months after that date.
1.Taking account of the types of activity and/or size of the undertakings concerned, Member States may specify categories of undertakings allowed to replace totally, partially or temporarily the illuminated signs, and/or acoustic signals provided for in this Directive by alternative measures which afford the same level of protection.
2.Member States may derogate, after consulting both sides of industry, from the application of Annex VIII, section 2 and/or Annex IX, section 3, whilst laying down alternative measures guaranteeing the same level of protection.
3.Member States shall consult, in accordance with national laws and/or practice, employers' and workers' organizations when implementing paragraph 1.
1.Without prejudice to Article 10 of Directive 89/391/EEC, workers and/or their representatives shall be informed of all the measures to be taken concerning the safety and/or health signs used at work.
2.Without prejudice to Article 12 of Directive 89/391/EEC, workers must be given suitable instruction, in particular in the form of specific directions concerning the safety and/or health signs used at work.In particular, the instruction referred to in the first subparagraph shall cover the meaning of the signs, especially signs incorporating words, and the general and specific behaviour to be adopted.
Article 8Consultation of workers and workers' participation#
Consultation and participation of workers and/or their representatives shall take place in accordance with Article 11 of Directive 89/391/EEC on the matters covered by this Directive, including Annexes I to IX.
3.The delegation of power referred to in Article 9 may be revoked at any time by the European Parliament or by the Council. A decision to revoke shall put an end to the delegation of the power specified in that decision. It shall take effect the day following the publication of the decision in the Official Journal of the European Union or at a later date specified therein. It shall not affect the validity of any delegated acts already in force.
4.Before adopting a delegated act, the Commission shall consult experts designated by each Member State in accordance with the principles laid down in the Interinstitutional Agreement of 13 April 2016 on Better Law-Making.
5.As soon as it adopts a delegated act, the Commission shall notify it simultaneously to the European Parliament and to the Council.
6.A delegated act adopted pursuant to Article 9 shall enter into force only if no objection has been expressed either by the European Parliament or the Council within a period of two months of notification of that act to the European Parliament and the Council or if, before the expiry of that period, the European Parliament and the Council have both informed the Commission that they will not object. That period shall be extended by two months at the initiative of the European Parliament or of the Council.
1.Delegated acts adopted under this Article shall enter into force without delay and shall apply as long as no objection is expressed in accordance with paragraph 2. The notification of a delegated act to the European Parliament and the Council shall state the reasons for the use of the urgency procedure.
2.Either the European Parliament or the Council may object to a delegated act in accordance with the procedure referred to in Article 9a(6). In such a case, the Commission shall repeal the act immediately following the notification of the decision to object by the European Parliament or by the Council.
1.Directive 77/576/EEC shall be repealed on the date referred to in Article 11 (1), first subparagraph.However, in the cases referred to in Article 5, that Directive shall continue to apply for a maximum period of eighteen months following that date.
2.Any reference to the repealed Directive shall be taken to refer to the corresponding provisions of this Directive.
1.Member States shall bring into force the laws, regulations and administrative provisions required to comply with this Directive no later than 24 June 1994.They shall immediately inform the Commission thereof.
2.When Member States adopt these measures they shall contain a reference to this Directive or shall be accompanied by such reference on the occasion of their official publication. The methods of making such a reference shall be laid down by the Member States.
3.Member States shall communicate to the Commission the text of the provisions of domestic law which they have already adopted or adopt in the field covered by this Directive.
4.Member States shall report to the Commission every five years on the practical implementation of the provisions of this Directive, indicating the views of employers and workers.The Commission shall inform the European Parliament, the Council, the Economic and Social Committee and the Advisory Committee on Safety, Hygiene and Health at Work thereof.
5.The Commission shall forward periodically to the European Parliament, the Council and the Economic and Social Committee a report on the implementation of this Directive, taking into account paragraphs 1 to 4.
2.1.1.Permanent signboards must be used for signs relating to prohibitions, warnings and mandatory requirements and the location and identification of emergency escape routes and first-aid facilities.Signboards and/or a safety colour must be used to mark permanently the location and identification of fire-fighting equipment.
2.1.2.Signboards on containers and pipes must be placed as laid down in Annex III.
2.1.3.Places where there is a risk of colliding with obstacles or of falling must be permanently marked with a safety colour and/or with signboards.
2.1.4.Traffic routes must be permanently marked with a safety colour.
2.2.1.Illuminated signs, acoustic signals and/or verbal communication must be used where the occasion requires, taking into account the possibilities for interchanging and combining signs set out in Section 3, to signal danger, to call persons to take a specific course of action and for the emergency evacuation of persons.
2.2.2.Hand signals and/or verbal communication must be used where the occasion requires, to guide persons carrying out hazardous or dangerous manoeuvres.
—a safety colour or a signboard to mark places where there is an obstacle or a drop,
—illuminated signs, acoustic signals or verbal communication,
—hand signals or verbal communication.
3.1.
Any one of the following may be used if equally effective:
—illuminated signs and acoustic signals,
—illuminated signs and verbal communication,
—hand signals and verbal communication.
3.2.
Some types of signs may be used together:
4.
The instructions in the table below apply to all signs incorporating a safety colour:
Colour
Meaning or purpose
Instructions and information
Red
Prohibition sign
Dangerous behaviour
Danger alarm
Stop, shutdown, emergency cutout devicesEvacuate
Fire-fighting equipment
Identification and location
Yellow or Amber
Warning sign
Be careful, take precautionsExamine
Blue
Mandatory sign
Specific behaviour or actionWear personal protective equipment
Green
Emergency escape, first aid sign
Doors, exits, routes, equipment, facilities
No danger
Return to normal
5.
The effectiveness of a sign must not be adversely affected by:
5.1.1.the placing of too many signs too close together should be avoided;
5.1.2.two illuminated signs which are likely to be confused are not to be used at the same time;
5.1.3.an illuminated sign is not to be used in the proximity of another similar illuminated source;
5.1.4.two acoustic signals are not to be used at the same time;
5.1.5.an acoustic signal is not be used if there is too much ambient noise;
5.1.
the presence of another emission source of the same type which interferes with visibility or audibility; therefore, in particular,
5.2.
poor design, insufficient number, incorrect positioning, poor state of repair or incorrect functioning of the signs or signalling devices.
6.
Depending on requirements, signs and signalling devices must be cleaned, maintained, checked, repaired, and if necessary replaced on a regular basis to ensure that they retain their intrinsic and/or functional qualitities.
7.
The number and positioning of signs or signalling devices to be installed will depend on the extent of the hazards or dangers or on the zone to be covered.
8.
Signs requiring some form of power must be provided with a guaranteed emergency supply in the event of a power cut, unless the hazard has thereby been eliminated.
9.
The triggering of an illuminated sign and/or acoustic signal indicates when the required action should start, the sign or signal must be activated for as long as the action requires.
Illuminated signs and acoustic signals must be reactivated immediately after use.
10.
Illuminated signs and acoustic signals must be checked to ensure that they function correctly and that they are effective before they are put into service and subsequently at sufficiently frequent intervals.
11.
If the hearing or the sight of the workers concerned is impaired, including impairment caused by the wearing of personal protective equipment, measures must be taken to supplement or replace the signs concerned.
12.
Areas, rooms or enclosures used for the storage of significant quantities of hazardous substances or mixtures must be indicated by a suitable warning sign taken from Section 3.2 of Annex II, or marked as provided in Section 1 of Annex III, unless the labelling of the individual packages or containers is adequate for this purpose.
If there is no equivalent warning sign in Section 3.2 of Annex II to warn about hazardous chemical substances or mixtures, the relevant hazard pictogram, as laid down in Annex V to Regulation (EC) No 1272/2008 of the European Parliament and of the Councilnote, must be used.
Signboards are in principle to be installed at a suitable height and in a position appropriate to the line of sight, taking account of any obstacles, either at the access point to an area in the case of a general hazard, or in the immediate vicinity of a specific hazard or object and in a well-lit and easily accessible and visible location.Without prejudice to the provisions of Directive 89/654/EEC, phosphorescent colours, reflective materials or artificial lighting should be used where the level of natural light is poor.
2.2.The signboard must be removed when the situation to which it refers ceases to exist.
—black pictogram on white background, red edging and diagonal line (the red part to take up at least 35 % of the area of the sign).
Intrinsic features:
Sign to be used
No smokingSmoking and naked flames forbiddenNo access for pedestriansDo not exinguish with waterNot drinkableNot access for unauthorizedNo access for industrial vehiclesDo not touch
—black pictogram on a yellow background with black edging (the yellow part to take up at least 50 % of the area of the sign).
Intrinsic features:
Flammable material or high temperaturenoteExplosive materialToxic materialCorrosive materialRadioactive materialOverhead loadIndustrial vehiclesDanger: electricitynoteGeneral dangerLaser beamOxidant materialNon-ionizing radiationStrong magnetic fieldObstaclesDropnoteBiological riskLow temperaturenoteHarmful or irritant material
—white pictogram on a blue background (the blue part to take up at least 50 % of the area of the sign).
Intrinsic features:
Eye protection must be wornSafety helmet must be wornEar protection must be wornRespiratory equipment must be wornSafety boots must be wornSafety gloves must be wornSafety overalls must be wornFace protection must be wornSafety harness must be wornPedestrains must use this routeGeneral mandatory sign(to be accompanied where necessary by another sign)
—white pictogram on a green background (the green part to take up at least 50 % of the area of the sign)
Intrinsic features:
Emergency exit/escape routeThis way(supplementary information sign)First-aid postStretcherSafety showerEyewashEmergency telephone for first-aid or escape
—white pictogram on a red background (the red part to take up at least 50 % of the area of the sign).
Intrinsic features:
Fire hoseLadderFire esctinguisherEmergency fire telephoneThis way(supplementary information sign)
2.
Signs must be mounted as follows:
—on the visible side(s),
—in unpliable, self-adhesive or painted form.
3.Where appropriate, the signs referred to in section 1 of this Annex must have the intrinsic features defined in section 1.4. of Annex II and must fulfill the conditions of use for signboards laid down in section 2 of Annex II.
4.Without prejudice to sections 1,2 and 3, the labels used on pipes must be positioned visibly in the vicinity of the most dangerous points, such as valves and joint, and at reasonable intervals.
5.Areas, rooms or enclosures used for the storage of significant quantities of hazardous substances or mixtures must be indicated by a suitable warning sign taken from section 3.2 of Annex II, or marked as provided in section 1 of Annex III, unless the labelling of the individual packages or containers is adequate for this purpose, taking into account Annex II, point 1.5 with regard to dimensions.Stores of a number of hazardous substances or mixtures may be indicated by the warning sign for general danger.The signs or labels referred to above must be positioned, as appropriate, near the storage area or on the door leading into the storage room.
2.2.The stripes must be located so as to indicate the necessary safe distance between the vehicles and any object which may be near by, and between pedestrians and vehicles.
2.3.Permanent traffic routes in built-up areas outdoors should, as far as is practicable, be similarly marked, unless they are provided with suitable barriers or pavements.
—ensure the proper perception of the message, and
—avoid any confusion either between different illuminated signs or with a continuous illuminated sign.
2.2.If a flashing sign is used instead of — or together with — an acoustic signal, identical codes must be used.
2.3.Devices for emitting flashing signs in the event of grave danger must be under special surveillance or be fitted with an auxiliary lamp.
—start | to indicate the start of a command
—stop | to interrupt or end a movement
—end | to stop the operation
—raise | to have a load raised
—lower | to have a load lowered
—forwards | to be coordinated with the corresponding hand signals
—backwards
—right
—left
—danger | for an emergency stop
—quickly | to speed up a movement for safety reasons.
The signalman must be able to monitor all manoeuvres visually without being endangered thereby.
2.3.
The signalman’s duties must consist exclusively of directing manoeuvres and ensuring the safety of workers in the vicinity.
2.4.
If the conditions described in point 2.2 are not fulfilled, one or more extra singnalmen should be deployed.
2.5.
The operator must interrupt the ongoing manoeuvre in order to request new instructions when he is unable to carry out the orders he has received with the necessary safety guarantees.
Preliminary remark:The following set of coded signals are without prejudice to other codes applicable at Community level, used for the same manoeuvres in certain sectors:
Meaning
Description
Illustration
STARTAttentionStart of command
both arms are extended horizontally with the palms facing forward
STOPInterruptionEnd of movement
the right arm points upwards with the palm facing forwards
ENDof the operation
the right arm points upwards with the palm facing forwards
RAISE
the right arm points upwards with the palm facing forward and slowly makes a circle
LOWER
the right arm points downwards with the palm facing inwards and slowly makes a circ le
VERTICAL DISTANCE
the hands indicate the relevant distance
MOVE FORWARDS
both arms are bent with the palms facing upwards, and the forearms make slow movements towards the body
MOVE BACKWARDS
both arms are bent with the palms facing downwards, and the forearms make slow movements away from the body
RIGHTto the signalman’s
the right arm is extended more or less horizontally with the palm facing downwards and slowly makes small movements to the right
LEFTto the signalman’s
the left arm is extended more or less horizontally with the palm facing downwards and slowly makes small movements to the left
HORIZONTAL DISTANCE
the hands indicate the relevant distance
DANGEREmergency stop
both arms point upwards with the palms facing forwards