Contents
- Part I — technical requirements for radiodetermination applications referred to in articles 1 and 31 change
- 1. Generic indoor surveillance radars
- 2. Radiodetermination systems for industry automation (rdi)
- 3. Level probing radars (lpr)
- 4. Contour determination and acquisition radars (cdr)
- 5. Tank level probing radars (tlpr)
- 6. Radiodetermination systems for industry automation in shielded environments (rdi-s)
- 7. Exterior vehicular radars (evr)
- 8. In-cabin vehicular radars (ivr)
- Part II — protection of radio astronomy service (ras) stations
- Part III — exclusion zones around ras stations to be implemented by different categories of radiodetermination applications
- Part IV — restriction zones around ras stations in which exterior vehicular radars (evr) shall implement a power reduction mitigation technique
(2)unwanted emissions in the 130-134 GHz band shall stay below a maximum mean power spectral density of -33 dBm/MHz e.i.r.p. for front radars and of -36 dBm/MHz e.i.r.p. for corner radars and short-range/ultra-short-range radars. Additionally, the maximum peak e.i.r.p. within 1 GHz shall be below 2 dBm for front radars and below -1 dBm for corner radars and short-range/ultra-short-range radars;
Source: EUR-Lex, © European Union, 1998-2026. Reuse authorised under Decision 2011/833/EU.