(3)the following rows are inserted in sequential order:5 – a. | EN 81-43:2025Safety rules for the construction and installation of lifts – Special lifts for the transport of persons and goods – Part 43: Lifts for cranes13a. | EN 415-2:2025Safety of packaging machines – Part 2: Packaging machines for pre-formed rigid containers18a. | EN 415-8:2025Safety of packaging machines – Part 8: Strapping machines24a. | EN 474-1:2022Earth-moving machinery – Safety – Part 1: General requirementsRestriction: For the purpose of the presumption of conformity of this harmonised standard, the value in its clause 4.12.7.2 at 125 % of Q1 and Q2 shall be read as at least at 100 % or up to a value of 125 % of Q1 and Q2 insofar as the tested machine can indeed attain a higher load, as well as the value in its clause 4.12.7.3 at 110 % of Q1 and Q2 shall be read as at least at 100 % or up to a value of 110 % of Q1 and Q2 insofar as the tested machine can indeed attain a higher load113a. | EN 1459-1:2025Rough-terrain trucks – Safety requirements and verification – Part 1: Variable-reach trucks114a. | EN 1459-4:2020+A1:2025Rough-terrain trucks – Safety requirements and verification – Part 4: Additional requirements for variable-reach trucks handling freely suspended loads115a. | EN 1459-5:2020+A1:2025Rough-terrain trucks – Safety requirements and verification – Part 5: Attachment interface126a. | EN 1501-5:2021Refuse collection vehicles – General requirements and safety requirements – Part 5: Lifting devices for refuse collection vehiclesRestriction: This harmonised standard does not confer a presumption of conformity with the essential health and safety requirements set out in: point 1.1.7 of Annex I to Directive 2006/42/EC, which requires that machinery is designed and constructed in such a way as to provide adequate means to ensure that the operator has good working conditions and is protected against any foreseeable hazards; point 1.2.1 of that Annex, which requires that safety and reliability of control systems apply in a coherent way to the whole of an assembly of machinery, notably in case of reasonably foreseeable human error during operation, so that this does not lead to hazardous situations; and point 1.5.11 of that Annex, which requires that all machinery must be designed and constructed in such a way that external radiation does not interfere with its operation.301a. | EN 12312-15:2020+A2:2025Aircraft ground support equipment – Specific requirements – Part 15: Baggage and equipment tractors365a. | EN 12965:2019+A1:2025Tractors and machinery for agriculture and forestry – Power take-off (PTO) drive shafts and their guards – Safety368a. | EN 12999:2020+A1:2025Cranes – Loader cranes372a. | EN 13001-3-1:2025Cranes – General design – Part 3-1: Limit states and proof competence of steel structure401a. | EN 13155:2020+A1:2025Crane – Safety – Non-fixed load lifting attachments403a. | EN 13204:2025Powered rescue tools for fire and rescue service use – Safety and performance requirements437a. | EN 13852-1:2025Cranes – Offshore cranes – Part 1: General-purpose offshore cranes457a. | EN 14439:2025Cranes – Tower cranes494a. | EN 15180:2025Food processing machinery – Food depositors – Safety and hygiene requirements509a. | EN 15895:2025Powder actuated hand-held fixing and hard marking tools – Safety requirements512a. | EN 15955-2:2025Railway applications – Infrastructure – Demountable machines, trailers and associated equipment – Part 2: General safety requirements563a. | EN 17076:2020+A1:2025Tower cranes – Anti-collision systems – Safety requirements572 – a. | EN 17639:2025Safety of machinery – Cableway installations designed for the transport of material and specially designated persons – General safety requirements572b. | EN 17744:2025Agricultural and forestry machinery – Environmental requirements for dusters573 – a. | EN 17923:2025Equipment for vine cultivation and wine making – Safety – Must and grape harvest pumps