Commission Implementing Decision (EU) 2026/2015

Contents

THE EUROPEAN COMMISSION,Having regard to the Treaty on the Functioning of the European Union,Having regard to Regulation (EU) No 1025/2012 of the European Parliament and of the Council of 25 October 2012 on European Standardisation, amending Council Directives 89/686/EEC and 93/15/EEC and Directives 94/9/EC, 94/25/EC, 95/16/EC, 97/23/EC, 98/34/EC, 2004/22/EC, 2007/23/EC, 2009/23/EC and 2009/105/EC of the European Parliament and of the Council and repealing Council Decision 87/95/EEC and Decision No 1673/2006/EC of the European Parliament and of the Council^note, and in particular Article 10(6) thereof,Having regard to Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC^note, and in particular Article 7(3) thereof,Whereas:

(1)In accordance with Article 7 of Directive 2006/42/EC, machinery manufactured in conformity with harmonised standards, or parts thereof, the reference to which have been published in the Official Journal of the European Union, are to be presumed to comply with the essential health and safety requirements set out in Annex I to that Directive covered by those standards or parts thereof.

(2)By letter M/396 of 19 December 2006, the Commission made a request to the European Committee for Standardization (CEN) and the European Committee for Electrotechnical Standardization (Cenelec) (‘the first request’), for the drafting, the revision and the completion of the work on harmonised standards in support of Directive 2006/42/EC to take account of changes introduced by that Directive in comparison with Directive 98/37/EC of the European Parliament and of the Council^note.

(3)Moreover, by letter M/471 of 29 June 2010, the Commission made a further request to CEN (‘the second request’), for the drafting, the revision and the completion of the work on harmonised standards in support of Directive 2006/42/EC to take account of amendments and additions introduced by Directive 2009/127/EC of the European Parliament and of the Council^note concerning the essential requirements on the protection of the environment with which, specifically, machinery for pesticide application must also comply with.

(4)On the basis of the first request, CEN and Cenelec drafted the following new harmonised standards covering safety provisions: EN 81-42:2025, EN 415-4:2025, EN ISO 3991:2025, EN ISO 4254-20:2025, EN ISO 8437-1:2021 and its amendment thereto, EN ISO 8437-1:2021/A1:2026, EN ISO 8437-2:2021 and its amendment thereto, EN ISO 8437-2:2021/A1:2026, EN ISO 8437-3:2021 and its amendment thereto, EN ISO 8437-3:2021/A1:2026, EN ISO 8437-4:2021 and its amendment thereto, EN ISO 8437-4:2021/A1:2026, EN 17657:2025, EN 17969:2026, EN 50374:2025 and its amendment thereto, EN 50374:2025/A1:2025, EN ISO/ASTM 52938-1:2025, EN IEC 60335-2-34:2023 and its amendments thereto, EN IEC 60335-2-34:2023/A11:2023 and EN IEC 60335-2-34:2023/A12:2025, EN 60335-2-38:2003 and its correction thereto, EN 60335-2-38:2003/AC:2007, and its amendments thereto, EN 60335-2-38:2003/A1:2008, EN 60335-2-38:2003/A2:2024 and EN 60335-2-38:2003/A11:2024, EN IEC 62841-2-7:2024 and its amendment thereto, EN IEC 62841-2-7:2024/A11:2024, and its correction thereto, EN IEC 62841-2-7:2024/AC:2025-07, as well as EN IEC 62841-3-16:2026 and its amendment thereto, EN IEC 62841-3-16:2026/A11:2026..

(5)On the basis of the first request, CEN and Cenelec revised the following harmonised standards, the references of which are published in the Official Journal of the European Union by Commission Implementing Decision (EU) 2023/1586^note: EN 81-3:2000+A1:2008 and its correction thereto, EN 81-3:2000+A1:2008/AC:2009, EN 869:2006+A1:2009, EN 1175:2020, EN 1248:2001+A1:2009, EN ISO 3744:2010, EN ISO 8528-13:2016, EN ISO 10218-1:2011, EN ISO 10218-2:2011, EN ISO 11680-1:2021, EN ISO 11680-2:2021, EN 12312-1:2013, EN 12622:2009+A1:2013, EN 12693:2008, EN 13001-3-5:2016+A1:2021, EN 13288:2005+A1:2009, EN ISO 13855:2010, EN ISO 14119:2013, EN ISO 16089:2015, EN 16474:2015, EN ISO 18497:2018, EN ISO 19085-4:2018, EN ISO 19085-5:2017, EN ISO 19085-6:2017, EN ISO 19085-7:2019, EN ISO 19085-8:2018, EN ISO 19085-9:2020, EN ISO 19085-11:2020, EN ISO 19085-12:2021 and its amendment thereto, EN ISO 19085-12:2021/A11:2023, EN ISO 19085-13:2020, EN ISO 19085-15:2021, EN ISO 19932-1:2013, EN ISO 19932-2:2013, EN ISO 28139:2009, EN 50434:2014 subject to a restriction, EN 50580:2012 and its amendment thereto, EN 50580:2012/A1:2013, EN 50636-2-91:2014, EN 50636-2-100:2014, EN 60335-2-40:2003 and its corrections thereto, EN 60335-2-40:2003/AC:2006, EN 60335-2-40:2003/AC:2010 and EN 60335-2-40:2003/A13:2012/AC:2013 and its amendments thereto, EN 60335-2-40:2003/A11:2004, EN 60335-2-40:2003/A12:2005, EN 60335-2-40:2003/A1:2006, EN 60335-2-40:2003/A2:2009 and EN 60335-2-40:2003/A13:2012, EN 60335-2-58:2005 and its amendments thereto, EN 60335-2-58:2005/A2:2015 and EN 60335-2-58:2005/A12:2016, EN 60745-2-12:2009, EN 60745-2-18:2009, EN 60745-2-19:2009 and its amendment thereto, EN 60745-2-19:2009/A1:2010, EN 60745-2-20:2009, and EN 60745-2-22:2011 and its amendment thereto, EN 60745-2-22:2011/A11:2013. This resulted in the adoption of the following harmonised standards: EN 81-30:2025,EN ISO 23063:2025, EN 1175:2025, EN ISO 23779:2025, EN ISO 3744:2026, EN ISO 8528-13:2026, EN ISO 10218-1:2025, EN ISO 10218-2:2025, EN ISO 11680:2025, EN 12312-1:2024, EN ISO 6909:2026, EN 12693:2026, EN ISO 13855:2024, EN 13001-3-5:2025, EN 13288:2025, EN ISO 13855:2024, EN ISO 14119:2025 and its amendment thereto, EN ISO 14119/A11:2026, EN ISO 16089:2025, EN 16474:2025, EN ISO 18497-1:2024, EN ISO 18497-2:2024, EN ISO 18497-3:2024, EN ISO 18497-4:2024, EN ISO 19085-4:2024, EN ISO 19085-5:2024, EN ISO 19085-6:2024, EN ISO 19085-7:2024, EN ISO 19085-8:2024, EN ISO 19085-9:2024, EN ISO 19085-11:2024, EN ISO 19085-12:2024, EN ISO 19085-13:2025, EN ISO 19085-15:2025, EN ISO 19932-1:2025, EN ISO 19932-2:2025, EN ISO 28139:2021 and its amendment thereto, EN ISO 28139:2021/A1:2024, EN IEC 62841-4-8:2025, EN IEC 62841-2-7:2024 and its amendment and correction thereto, EN IEC 62841-2-7:2024/A11:2024 and EN IEC 62841-2-7:2024/AC:2025-07, EN IEC 62841-4-4:2026 and its amendments thereto, EN IEC 62841-4-4:2026/A1:2026 and EN IEC 62841-4-4:2026/A11:2026, EN IEC 62841-4-6:2024 and its amendment and correction thereto, EN IEC 62841-4-6:2024/A11:2024 and EN IEC 62841-4-6:2024/AC:2026-06, EN IEC 60335-2-40:2024 and its amendment thereto, EN IEC 60335-2-40:2024/A11:2024, EN IEC 60335-2-58:2025 and its amendment thereto, EN IEC 60335-2-58:2025/A11:2025, EN IEC 62841-2-12:2024 and its amendment and correction thereto, EN IEC 62841-2-12:2024/A11:2024 and EN IEC 62841-2-12:2024/AC:2025-11, EN IEC 62841-2-18:2026 and its amendment thereto, EN IEC 62841-2-18:2026/A11:2026, EN IEC 62841-2-19:2025 and its amendment thereto, EN IEC 62841-2-19:2025/A11:2025, EN IEC 62841-2-20:2025 and its amendment thereto, EN IEC 62841-2-20:2025/A11:2025, and EN IEC 62841-2-22:2025 and its amendment thereto, EN IEC 62841-2-22:2025/A11:2025

(6)Furthermore, on the basis of the first request, Cenelec amended EN ISO 4254-7:2017, EN IEC 62061:2021, EN IEC 62841-2-6:2020 and its amendment thereto EN IEC 62841-2-6:2020/A11:2020, as well as EN 62841-2-11:2016 and its amendment EN 62841-2-11:2016/A1:2020 subject to a restriction, the references of which are published in the Official Journal of the European Union by Implementing Decision (EU) 2023/1586.

(7)On the basis of the second request, CEN drafted the new harmonised standards EN ISO 3991:2025, EN ISO 4254-20:2025, as well as EN 17745:2025.

(8)On the basis of the second request, CEN revised the following harmonised standards, the references of which are published in the Official Journal of the European Union by Implementing Decision (EU) 2023/1586: EN ISO 19932-1:2013, EN ISO 19932-2:2013, as well as EN ISO 28139:2009. This resulted in the adoption of the following harmonised standards: EN ISO 19932-1:2025, EN ISO 19932-2:2025, and EN ISO 28139:2021 and its amendment thereto, EN ISO 28139:2021/A1:2024.

(9)The Commission, together with CEN and Cenelec, has assessed whether those new revising and amending harmonised standards comply with the relevant requests.

(10)The following harmonised standards satisfy the safety objectives which they aim to cover and which are set out in Directive 2006/42/EC: EN ISO 3744:2026; EN ISO 13855:2024; EN ISO 14119:2025, as amended by EN ISO 14119/A11:2026; EN IEC 62061:2021, as amended by EN IEC 62061:2021/A1:2024; EN 81-30:2025; EN 81-42:2025; EN 415-4:2025; EN 1175:2025; EN ISO 3991:2025; EN ISO 4254-7:2017, as amended by EN ISO 4254-7/A1:2026; EN ISO 4254-20:2025; EN ISO 6909:2026; EN ISO 8437-1:2021, as amended by EN ISO 8437-1:2021/A1:2026; EN ISO 8437-2:2021, as amended by EN ISO 8437-2:2021/A1:2026; EN ISO 8437-3:2021, as amended by EN ISO 8437-3:2021/A1:2026; EN ISO 8437-4:2021, as amended by EN ISO 8437-4:2021/A1:2026; EN ISO 8528-13:2026; EN ISO 10218-1:2025; EN ISO 10218-2:2025; EN ISO 11680:2025; EN 12312-1:2024; EN 12693:2026; EN 13001-3-5:2025; EN 13288:2025; EN ISO 16089:2025; EN 16474:2025; EN 17657:2025; EN 17745:2025; EN 17969:2026; EN ISO 18497-1:2024; EN ISO 18497-2:2024; EN ISO 18497-3:2024; EN ISO 18497-4:2024; EN ISO 19085-4:2024; EN ISO 19085-5:2024; EN ISO 19085-6:2024; EN ISO 19085-7:2024; EN ISO 19085-8:2024; EN ISO 19085-9:2024; EN ISO 19085-11:2024; EN ISO 19085-12:2024; EN ISO 19085-13:2025; EN ISO 19085-15:2025; EN ISO 19932-1:2025; EN ISO 19932-2:2025; EN ISO 23063:2025; EN ISO 23779:2025; EN ISO 28139:2021, as amended by EN ISO 28139:2021/A1:2024; EN 50374:2025, as amended by EN 50374:2025/A1:2025; EN ISO/ASTM 52938-1:2025; EN IEC 60335-2-34:2023, as amended by EN IEC 60335-2-34:2023/A11:2023 and EN IEC 60335-2-34:2023/A12:2025; EN 60335-2-38:2003, as corrected by EN 60335-2-38:2003/AC:2007 and amended by EN 60335-2-38:2003/A1:2008, EN 60335-2-38:2003/A2:2024 and EN 60335-2-38:2003/A11:2024; EN IEC 60335-2-40:2024, as amended by EN IEC 60335-2-40:2024/A11:2024; EN IEC 60335-2-58:2025, as amended by EN IEC 60335-2-58:2025/A11:2025; EN IEC 62841-2-6:2020, as amended by EN IEC 62841-2-6:2020/A11:2020 EN IEC 62841-2-6:2020/A1:2024 and EN IEC 62841-2-6:2020/A12:2024 and corrected by EN IEC 62841-2-6:2020/AC:2024-11; EN IEC 62841-2-7:2024 as amended by EN IEC 62841-2-7:2024/A11:2024 and corrected by EN IEC 62841-2-7:2024/AC:2025-07; EN 62841-2-11:2016, as amended by EN 62841-2-11:2016/A1:2020 and EN 62841-2-11:2016/A11:2024; EN IEC 62841-2-12:2024, as amended by EN IEC 62841-2-12:2024/A11:2024 and corrected by EN IEC 62841-2-12:2024/AC:2025-11; EN IEC 62841-2-18:2026, as amended by EN IEC 62841-2-18:2026/A11:2026; EN IEC 62841-2-19:2025, as amended by EN IEC 62841-2-19:2025/A11:2025; EN IEC 62841-2-20:2025, as amended by EN IEC 62841-2-20:2025/A11:2025;EN IEC 62841-2-22:2025, as amended by EN IEC 62841-2-22:2025/A11:2025; EN IEC 62841-2-23:2026, as amended by EN IEC 62841-2-23:2026/A11:2026; EN IEC 62841-3-16:2026, as amended by EN IEC 62841-3-16:2026/A11:2026; EN IEC 62841-4-4:2026, as amended by EN IEC 62841-4-4:2026/A1:2026 and EN IEC 62841-4-4:2026/A11:2026; EN IEC 62841-4-6:2024, as amended by EN IEC 62841-4-6:2024/A11:2024 and corrected by EN IEC 62841-4-6:2024/AC:2026-06; and EN IEC 62841-4-8:2025, as amended by EN IEC 62841-4-8:2025/A11:2025. It is therefore appropriate to publish the references of those harmonised standards, as well as the amendments and corrections thereto, in the Official Journal of the European Union.

(11)Annex I to Implementing Decision (EU) 2023/1586 lists the references of harmonised standards conferring a presumption of conformity with Directive 2006/42/EC. In order to ensure that the references of harmonised standards drafted in support of Directive 2006/42/EC are listed in one act, the references of the harmonised standards, together with the amendments and corrections thereto, referred to in the previous recital, should be included in that Annex.

(12)Moreover, CEN corrected harmonised standards EN 13155:2020+A1:2025 and EN 14439:2025. It is therefore necessary to reflect those corrections in Part Three of Annex I to Implementing Decision (EU) 2023/1586, accordingly.

(13)Implementing Decision (EU) 2023/1586 should therefore be amended accordingly.

(14)Given that Directive 2006/42/EC is repealed by Regulation (EU) 2023/1230 of the European Parliament and of the Council^note with effect from 20 January 2027, it is necessary to repeal, with effect from that date, Implementing Decision (EU) 2023/1586.

(15)Compliance with a harmonised standard confers a presumption of conformity with the corresponding essential requirements set out in Union harmonisation legislation from the date of publication of the reference of such standard in the Official Journal of the European Union. This Decision should therefore enter into force on the date of its publication,

HAS ADOPTED THIS DECISION: