Commission Implementing Decision (EU) 2026/1279

Contents

Article 1 #

The references to harmonised standards for personal protective equipment drafted in support of Regulation (EU) 2016/425, listed in Annex I to this Decision, are hereby published in the Official Journal of the European Union.

Article 2 #

Implementing Decision (EU) 2023/941 is repealed.However, it shall continue to apply in respect of the references to harmonised standards listed in Annex II to this Decision until the dates of withdrawal of those references set out in that Annex.

Article 3 #

This Decision shall enter into force on the day of its publication in the Official Journal of the European Union.

Annex I

No	Reference of the standard
1.	EN 136:1998Respiratory protective devices – Full face masks – Requirements, testing, markingEN 136:1998/AC:2003
2.	EN 137:2006Respiratory protective devices – Self-contained open-circuit compressed air breathing apparatus with full face mask – Requirements, testing, marking
3.	EN 140:1998Respiratory protective devices – Half masks and quarter masks – Requirements, testing, markingEN 140:1998/AC:1999
4.	EN 142:2002Respiratory protective devices – Mouthpiece assemblies – Requirements, testing, marking
5.	EN 143:2021Respiratory protective devices – Particle filters – Requirements, testing, marking
6.	EN 144-1:2000Respiratory protective devices – Gas cylinder valves – Part 1: Thread connections for insert connectorEN 144-1:2000/A1:2003EN 144-1:2000/A2:2005
7.	EN 144-2:1998Respiratory protective devices – Gas cylinder valves – Part 2: Outlet connections
8.	EN 144-3:2003Respiratory protective devices – Gas cylinder valves – Part 3: Outlet connections for diving gases Nitrox and oxygenEN 144-3:2003/AC:2003
9.	EN 145:1997Respiratory protective devices – Self-contained closed-circuit breathing apparatus compressed oxygen or compressed oxygen-nitrogen type – Requirements, testing, markingEN 145:1997/A1:2000
10.	EN 148-1:1999Respiratory protective devices – Threads for facepieces – Part 1: Standard thread connection
11.	EN 148-2:1999Respiratory protective devices – Threads for facepieces – Part 2: Centre thread connection
12.	EN 148-3:1999Respiratory protective devices – Threads for facepieces – Part 3: Tread connection M 45 x 3
13.	EN 149:2001+A1:2009Respiratory protective devices – Filtering half masks to protect against particles – Requirements, testing, marking
14.	EN 207:2017Personal eye-protection equipment – Filters and eye-protectors against laser radiation (laser eye-protectors)
15.	EN 208:2009Personal eye-protection – Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors)
16.	EN 250:2014Respiratory equipment – Open-circuit self-contained compressed air diving apparatus – Requirements, testing and marking
17.	EN 342:2017Protective clothing – Ensembles and garments for protection against cold
18.	EN 343:2019Protective clothing – Protection against rain
19.	EN 352-1:2020Hearing protectors – General requirements – Part 1: EarmuffsNotice: This standard does not require labelling indicating the noise attenuation level on the product. Compliance with this standard therefore does not confer a presumption of conformity with point 3.5., second paragraph, of Annex II to Regulation (EU) 2016/425.
20.	EN 352-2:2020+A1:2024Hearing protectors – General requirements – Part 2: EarplugsNotice: This standard does not require labelling indicating the noise attenuation level on the product. Compliance with this standard therefore does not confer a presumption of conformity with point 3.5., second paragraph, of Annex II to Regulation (EU) 2016/425.
21.	EN 352-3:2020Hearing protectors – General requirements – Part 3: Earmuffs attached to head protection and/or face protection devicesNotice: This standard does not require labelling indicating the noise attenuation level on the product. Compliance with this standard therefore does not confer a presumption of conformity with point 3.5., second paragraph, of Annex II to Regulation (EU) 2016/425.
22.	EN 352-4:2020Hearing protectors – Safety requirements – Part 4: Level-dependent earmuffs
23.	EN 352-5:2020Hearing protectors – Safety requirements – Part 5: Active noise reduction earmuffs
24.	EN 352-6:2020+A1:2024Hearing protectors – Safety requirements – Part 6: Earmuffs with safety-related audio input
25.	EN 352-7:2020Hearing protectors – Safety requirements – Part 7: Level-dependent earplugs
26.	EN 352-8:2020+A1:2024Hearing protectors – Safety requirements – Part 8: Entertainment audio earmuffs
27.	EN 352-9:2020+A1:2024Hearing protectors – Safety requirements – Part 9: Earplugs with safety-related audio input
28.	EN 352-10:2020+A1:2024Hearing protectors – Safety requirements – Part 10: Entertainment audio earplugs
29.	EN 353-1:2014+A1:2017Personal fall protection equipment – Guided type fall arresters including an anchor line – Part 1: Guided type fall arresters including a rigid anchor line
30.	EN 353-2:2024Personal fall protection equipment – Part 2: Guided type fall arresters including a flexible anchor line
31.	EN 354:2010Personal fall protection equipment – Lanyards
32.	EN 355:2002Personal protective equipment against falls from a height – Energy absorbers
33.	EN 358:2018Personal protective equipment for work positioning and prevention of falls from a height – Belts and lanyards for work positioning or restraint
34.	EN 360:2023Personal fall protection equipment – Retractable type fall arresters
35.	EN 361:2002Personal protective equipment against falls from a height – Full body harnesses
36.	EN 362:2004Personal protective equipment against falls from a height – Connectors
37.	EN 365:2004Personal protective equipment against falls from a height – General requirements for instructions for use, maintenance, periodic examination, repair, marking and packagingEN 365:2004/AC:2006
38.	EN ISO 374-1:2016Protective gloves against dangerous chemicals and micro-organisms – Part 1: Terminology and performance requirements for chemical risks (ISO 374-1:2016)
39.	EN ISO 374-5:2016Protective gloves against dangerous chemicals and micro-organisms – Part 5: Terminology and performance requirements for micro-organisms risks (ISO 374-5:2016)
39a.	EN ISO 374-6:2025Protective gloves against dangerous chemicals and micro-organisms – Part 6: Protective gloves for hairdressers (ISO 374-6:2025)
40.	EN 388:2016+A1:2018Protective gloves against mechanical risks
41.	EN 397:2025Industrial protective helmetsEN 397:2025/AC:2025Notice: In clause 4.2.7.5.2.5 of the standard, where it reads ‘5.13’, it shall read ‘5.13.5’ instead.Compliance with clause 4.2.7.4 of the standard provides presumption of conformity with essential health and safety requirement 3.6.1.
42.	EN 402:2003Respiratory protective devices – Lung governed demand self-contained open-circuit compressed air breathing apparatus with full face mask or mouthpiece assembly for escape – Requirements, testing, marking
43.	EN 403:2004Respiratory protective devices for self-rescue – Filtering devices with hood for escape from fire – Requirements, testing, marking
44.	EN 404:2005Respiratory protective devices for self-rescue – Filter self-rescuer from carbon monoxide with mouthpiece assembly
45.	EN 405:2001+A1:2009Respiratory protective devices – Valved filtering half masks to protect against gases or gases and particles – Requirements, testing, marking
46.	EN 407:2004Protective gloves against thermal risks (heat and/or fire)
47.	EN 421:2010Protective gloves against ionizing radiation and radioactive contamination
48.	EN 443:2008Helmets for fire fighting in buildings and other structures
49.	EN 469:2020Protective clothing for firefighters – Performance requirements for protective clothing for firefighting activities
50.	EN 510:2019Specification for protective clothing for use where there is a risk of entanglement with moving parts
51.	EN 511:2006Protective gloves against cold
52.	EN 564:2023Mountaineering equipment – Accessory cord – Safety requirements and test methods
53.	EN 565:2017Mountaineering equipment – Tape – Safety requirements and test methods
54.	EN 566:2017Mountaineering equipment – Slings – Safety requirements and test methods
55.	EN 567:2013Mountaineering equipment – Rope clamps – Safety requirements and test methods
56.	EN 568:2015Mountaineering equipment – Ice anchors – Safety requirements and test methods
57.	EN 569:2007Mountaineering equipment – Pitons – Safety requirements and test methods
58.	EN 659:2003+A1:2008Protective gloves for firefightersEN 659:2003+A1:2008/AC:2009
59.	EN 795:2012Personal fall protection equipment – Anchor devicesWarning: This publication does not concern the equipment described in:— type A (anchor devices with one or more stationary anchor points and with the need for structural anchors or fixing elements to fix to the structure) referred to in clauses 3.2.1, 4.4.1, 5.3;— type C (anchor devices employing horizontal flexible anchor lines) referred to in clauses 3.2.3, 4.4.3 and 5.5;— type D (anchor devices employing horizontal rigid anchor lines) referred to in clauses 3.2.4, 4.4.4 and 5.6;— any combination of the above. In respect of types A, C and D, this publication does not concern either clauses: 4.5, 5.2.2, 6, 7; Annex A or Annex ZA. Accordingly, in respect of the equipment mentioned above, there shall be no presumption of conformity with the provisions of Regulation (EU) 2016/425 because they are not considered to be PPE.
60.	EN 812:2012Industrial bump caps
61.	EN 813:2024Personal fall protection equipment – Sit harnesses
62.	EN 892:2012+A3:2023Mountaineering equipment – Dynamic mountaineering ropes – Safety requirements and test methods
63.	EN 893:2019Mountaineering equipment – Crampons – Safety requirements and test methods
64.	EN 943-1:2015+A1:2019Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols – Part 1: Performance requirements for Type 1 (gas-tight) chemical protective suits
65.	EN 943-2:2019Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols – Part 2: Performance requirements for Type 1 (gas-tight) chemical protective suits for emergency teams (ET)
66.	EN 958:2024Mountaineering equipment – Energy absorbing systems for use in klettersteig (via ferrata) climbing – Safety requirements and test methods
67.	EN 966:2012+A1:2012Helmets for airborne sports
68.	EN 1073-1:2016+A1:2018Protective clothing against solid airborne particles including radioactive contamination – Part 1: Requirements and test methods for compressed air line ventilated protective clothing, protecting the body and the respiratory tract
69.	EN 1073-2:2002Protective clothing against radioactive contamination – Part 2: Requirements and test methods for non-ventilated protective clothing against particulate radioactive contamination
70.	EN 1077:2007Helmets for alpine skiers and snowboarders
71.	EN 1078:2012+A1:2012Helmets for pedal cyclists and for users of skateboards and roller skates
72.	EN 1080:2013Impact protection helmets for young children
73.	EN 1082-1:1996Protective clothing – Gloves and arm guards protecting against cuts and stabs by hand knives – Part 1: Chain mail gloves and arm guards
74.	EN 1082-2:2000Protective clothing – Gloves and arm guards protecting against cuts and stabs by hand knives – Part 2: Gloves and arm guards made of material other than chain mail
75.	EN 1146:2005Respiratory protective devices – Self-contained open-circuit compressed air breathing apparatus incorporating a hood for escape – Requirements, testing, marking
76.	EN 1149-5:2018Protective clothing – Electrostatic properties – Part 5: Material performance and design requirements
77.	EN 1384:2023Helmets for equestrian activities
78.	EN 1385:2012Helmets for canoeing and white water sports
79.	EN 1486:2007Protective clothing for fire-fighters – Test methods and requirements for reflective clothing for specialised fire-fighting
80.	EN 1497:2007Personal fall protection equipment – Rescue harnesses
81.	EN 1827:1999+A1:2009Respiratory protective devices – Half masks without inhalation valves and with separable filters to protect against gases or gases and particles or particles only – Requirements, testing, marking
82.	EN 1891:1998Personal protective equipment for the prevention of falls from a height – Low stretch kernmantel ropes
83.	EN 1938:2010Personal eye protection – Goggles for motorcycle and moped users
84.	EN ISO 10256-1:2024Protective equipment for use in ice hockey - Part 1: General requirements (ISO 10256-1:2024)
85.	EN ISO 10256-2:2024Protective equipment for use in ice hockey - Part 2: Head protectors for skaters (ISO 10256-2:2024)
86.	EN ISO 10256-3:2024Protective equipment for use in ice hockey - Part 3: Face and eye protectors for skaters (ISO 10256-3:2024)
87.	EN ISO 10256-4:2024Protective equipment for use in ice hockey - Part 4: Head and face protectors for goalkeepers (ISO 10256-4:2024)
88.	EN ISO 10819:2013Mechanical vibration and shock – Hand-arm vibration – Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand (ISO 10819:2013)EN ISO 10819:2013/A1:2019EN ISO 10819:2013/A2:2022
89.	EN ISO 10862:2009Small craft – Quick release system for trapeze harness (ISO 10862:2009)
90.	EN ISO 11393-2:2019Protective clothing for users of hand-held chainsaws – Part 2: Performance requirements and test methods for leg protectors (ISO 11393-2:2018)
91.	EN ISO 11393-4:2019Protective clothing for users of hand-held chainsaws – Part 4: Performance requirements and test methods for protective gloves (ISO 11393-4:2018)
92.	EN ISO 11393-5:2019Protective clothing for users of hand-held chainsaws – Part 5: Performance requirements and test methods for protective gaiters (ISO 11393-5:2018)
93.	EN ISO 11393-6:2019Protective clothing for users of hand-held chainsaws – Part 6: Performance requirements and test methods for upper body protectors (ISO 11393-6:2018)
94.	EN 12021:2014Respiratory equipment – Compressed gases for breathing apparatus
95.	EN 12083:1998Respiratory protective devices – Filters with breathing hoses, (Non-mask mounted filters) – Particle filters, gas filters, and combined filters – Requirements, testing, markingEN 12083:1998/AC:2000
96.	EN 12270:2013Mountaineering equipment – Chocks – Safety requirements and test methods
97.	EN 12275:2013Mountaineering equipment – Connectors – Safety requirements and test methods
98.	EN 12276:2013Mountaineering equipment – Frictional anchors – Safety requirements and test methods
99.	EN 12277:2015+A1:2018Mountaineering equipment – Harnesses – Safety requirements and test methods
100.	EN 12278:2007Mountaineering equipment – Pulleys – Safety requirements and test methods
101.	EN ISO 12312-1:2022Eye and face protection - Sunglasses and related eyewear - Part 1: Sunglasses for general use (ISO 12312-1:2022)EN ISO 12312-1:2022/A11:2024
102.	EN ISO 12312-2:2015Eye and face protection – Sunglasses and related eyewear – Part 2: Filters for direct observation of the sun (ISO 12312-2:2015)
103.	EN ISO 12401:2009Small craft – Deck safety harness and safety line – Safety requirements and test methods (ISO 12401:2009)
104.	EN ISO 12402-2:2020Personal flotation devices – Part 2: Lifejackets, performance level 275 – Safety requirements (ISO 12402-2:2020)Notice:Application of clause 5.6 of this standard does not confer a presumption of conformity with the essential health and safety requirement set out in point 1.1.1. of Annex II to Regulation (EU) 2016/425.Application of clauses 5.1.2, 5.1.3, 5.1.5, 5.1.7, 5.2, 5.3.1.1, 5.3.1.2, 5.3.2.2, 5.3.2.3, 5.3.4.3, 5.3.4.4, 5.6.1.4, 5.6.1.7, 5.6.1.8, 5.6.1.9, 5.6.1.10 and 5.6.1.11 of this standard does not confer a presumption of conformity with the essential health and safety requirement set out in point 1.2.1. of Annex II to Regulation (EU) 2016/425.Application of clauses 5.1.2, 5.2, 5.3.1.1, 5.3.2.2, 5.3.4.2, 5.3.4.4, 5.6.3 and 5.7 of this standard does not confer a presumption of conformity with the essential health and safety requirement set out in point 3.4 of Annex II to Regulation (EU) 2016/425.
105.	EN ISO 12402-3:2020Personal flotation devices – Part 3: Lifejackets, performance level 150 – Safety requirements (ISO 12402-3:2020)Notice:Application of clause 5.6 of this standard does not confer a presumption of conformity with the essential health and safety requirement set out in point 1.1.1. of Annex II to Regulation (EU) 2016/425.Application of clauses 5.1.2, 5.1.3, 5.1.5, 5.1.7, 5.2, 5.3.1.1, 5.3.1.2, 5.3.2.2, 5.3.2.3, 5.3.4.3, 5.3.4.4, 5.6.1.4, 5.6.1.7, 5.6.1.8, 5.6.1.9, 5.6.1.10 and 5.6.1.11 of this standard does not confer a presumption of conformity with the essential health and safety requirement set out in point 1.2.1. of Annex II to Regulation (EU) 2016/425.Application of clauses 5.1.2, 5.2, 5.3.1.1, 5.3.2.2, 5.3.4.2, 5.3.4.4, 5.6.3 and 5.7 of this standard does not confer a presumption of conformity with the essential health and safety requirement set out in point 3.4 of Annex II to Regulation (EU) 2016/425.
106.	EN ISO 12402-4:2020Personal flotation devices – Part 4: Lifejackets, performance level 100 – Safety requirements (ISO 12402-4:2020)Notice:Application of clause 5.6 of this standard does not confer a presumption of conformity with the essential health and safety requirement set out in point 1.1.1. of Annex II to Regulation (EU) 2016/425.Application of clauses 5.1.2, 5.1.3, 5.1.5, 5.1.7, 5.2, 5.3.1.1, 5.3.1.2, 5.3.2.2, 5.3.2.3, 5.3.4.3, 5.3.4.4, 5.6.1.4, 5.6.1.7, 5.6.1.8, 5.6.1.9, 5.6.1.10 and 5.6.1.11 of this standard does not confer a presumption of conformity with the essential health and safety requirement set out in point 1.2.1. of Annex II to Regulation (EU) 2016/425.Application of clauses 5.1.2, 5.2, 5.3.1.1, 5.3.2.2, 5.3.4.2, 5.3.4.4, 5.6.3 and 5.7 of this standard does not confer a presumption of conformity with the essential health and safety requirement set out in point 3.4 of Annex II to Regulation (EU) 2016/425.
107.	EN ISO 12402-5:2020Personal flotation devices – Part 5: Buoyancy aids (level 50) – Safety requirements (ISO 12402-5:2020)
108.	EN ISO 12402-6:2020Personal flotation devices – Part 6: Special application lifejackets and buoyancy aids – Safety requirements and additional test methods (ISO 12402-6:2020)
109.	EN ISO 12402-8:2020Personal flotation devices – Part 8: Accessories – Safety requirements and test methods (ISO 12402-8:2020)
110.	EN 12477:2001Protective gloves for weldersEN 12477:2001/A1:2005
111.	EN 12492:2025Mountaineering equipment – Helmets for mountaineers – Safety requirements and test methods
112.	EN 12841:2024Personal fall protection equipment – Rope access systems – Rope adjustment devices
113.	EN 12941:2023Respiratory protective devices – Powered filtering devices incorporating a loose fitting respiratory interface – Requirements, testing, marking
114.	EN 12942:2023Respiratory protective devices – Powered filtering devices incorporating full face masks, half masks or quarter masks – Requirements, testing, marking
115.	EN 13034:2005+A1:2009Protective clothing against liquid chemicals – Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB [6] equipment)
116.	EN 13061:2009Protective clothing – Shin guards for association football players – Requirements and test methods
117.	EN 13089:2011+A3:2023Mountaineering equipment – Ice-tools – Safety requirements and test methods
118.	EN 13138-1:2021Buoyant aids for swimming instruction – Part 1: Safety requirements and test methods for buoyant aids to be wornEN 13138-1:2021/AC:2022
119.	EN 13158:2018Protective clothing – Protective jackets, body and shoulder protectors for equestrian use, for horse riders and those working with horses, and for horse drivers – Requirements and test methods
120.	EN 13178:2000Personal eye-protection – Eye protectors for snowmobile users
121.	EN 13277-1:2000Protective equipment for martial arts – Part 1: General requirements and test methods
122.	EN 13277-2:2000Protective equipment for martial arts – Part 2: Additional requirements and test methods for instep protectors, shin protectors and forearm protectors
123.	EN 13277-3:2013Protective equipment for martial arts – Part 3: Additional requirements and test methods for trunk protectors
124.	EN 13277-4:2001Protective equipment for martial arts – Part 4: Additional requirements and test methods for head protectorsEN 13277-4:2001/A1:2007
125.	EN 13277-5:2002Protective equipment for martial arts – Part 5: Additional requirements and test methods for genital protectors and abdominal protectors
126.	EN 13277-6:2003Protective equipment for martial arts – Part 6: Additional requirements and test methods for breast protectors for females
127.	EN 13277-7:2009Protective equipment for martial arts – Part 7: Additional requirements and test methods for hand and foot protectors
128.	EN 13277-8:2017Protective equipment for martial arts – Part 8: Additional requirements and test methods for karate face protectors
129.	EN 13484:2012Helmets for users of luges
130.	EN 13546:2002+A1:2007Protective clothing – Hand, arm, chest, abdomen, leg, foot and genital protectors for field hockey goal keepers, and shin protectors for field players – Requirements and test methods
131.	EN 13567:2002+A1:2007Protective clothing – Hand, arm, chest, abdomen, leg, genital and face protectors for fencers – Requirements and test methods
132.	EN 13594:2015Protective gloves for motorcycle riders – Requirements and test methods
133.	EN 13634:2017Protective footwear for motorcycle riders – Requirements and test methods
134.	EN ISO 13688:2013Protective clothing – General requirements (ISO 13688:2013)EN ISO 13688:2013/A1:2021
135.	EN 13781:2012Protective helmets for drivers and passengers of snowmobiles and bobsleighs
136.	EN 13794:2002Respiratory protective devices – Self-contained closed-circuit breathing apparatus for escape – Requirements, testing, marking
137.	EN 13832-2:2018Footwear protecting against chemicals – Part 2: Requirements for limited contact with chemicals
138.	EN 13832-3:2018Footwear protecting against chemicals – Part 3: Requirements for prolonged contact with chemicals
139.	EN 13949:2003Respiratory equipment – Open-circuit self-contained diving apparatus for use with compressed Nitrox and oxygen – Requirements, testing, marking
140.	EN ISO 13982-1:2004Protective clothing for use against solid particulates – Part 1: Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (type 5 clothing) (ISO 13982-1:2004)EN ISO 13982-1:2004/A1:2010
141.	EN ISO 13998:2003Protective clothing – Aprons, trousers and vests protecting against cuts and stabs by hand knives (ISO 13998:2003)
142.	EN 14021:2003Stone shields for off-road motorcycling suited to protect riders against stones and debris – Requirements and test methods
143.	EN 14052:2012+A1:2012High performance industrial helmets
144.	EN 14058:2017+A1:2023Protective clothing – Garments for protection against cool environments
145.	EN 14120:2003+A1:2007Protective clothing – Wrist, palm, knee and elbow protectors for users of roller sports equipment – Requirements and test methods
146.	EN 14126:2003Protective clothing – Performance requirements and tests methods for protective clothing against infective agentsEN 14126:2003/AC:2004
147.	EN 14143:2013Respiratory equipment – Self-contained re-breathing diving apparatus
148.	EN 14225-1:2017Diving suits – Part 1: Wet suits – Requirements and test methods
149.	EN 14225-2:2017Diving suits – Part 2: Dry suits – Requirements and test methods
150.	EN 14225-3:2017Diving suits – Part 3: Actively heated or cooled suit systems and components – Requirements and test methods
151.	EN 14328:2005Protective clothing – Gloves and armguards protecting against cuts by powered knives – Requirements and test methods
152.	EN 14387:2004+A1:2008Respiratory protective devices – Gas filter(s) and combined filter(s) – Requirements, testing, marking
153.	EN 14404-2:2024Personal protective equipment – Knee protectors for work in the kneeling position – Part 2: Requirements for wearable knee protectors (type 1)
154.	EN 14404-3:2024Personal protective equipment – Knee protectors for work in the kneeling position – Part 3: Requirements for the individual combination of knee pads and garments (type 2)Notice: In addition to clauses 5.5.1.1, 5.5.1.2, 5.5.5.1 and 5.5.5.2, compliance with clause 5.5.1.3 is also necessary to confer presumption of conformity with essential requirement in point 1.3.1. of Annex II to Regulation (EU) 2016/425
155.	EN 14404-4:2024Personal protective equipment – Knee protectors for work in the kneeling position – Part 4: Requirements for the combination of interoperable knee pads and garments (type 2)
156.	EN 14404-6:2024Personal protective equipment – Knee protectors for work in the kneeling position – Part 6: Requirements for kneeling systems (type 4)
157.	EN 14435:2004Respiratory protective devices – Self-contained open-circuit compressed air breathing apparatus with half mask designed to be used with positive pressure only – Requirements, testing, marking
158.	EN 14458:2018Personal eye-equipment – High performance visors intended only for use with protective helmets
159.	EN ISO 14460:1999Protective clothing for automobile racing drivers – Protection against heat and flame – Performance requirements and test methods (ISO 14460:1999)EN ISO 14460:1999/AC:1999EN ISO 14460:1999/A1:2002
160.	EN 14529:2005Respiratory protective devices – Self-contained open-circuit compressed air breathing apparatus with half mask designed to include a positive pressure lung governed demand valve for escape purposes only
161.	EN 14593-1:2005Respiratory protective devices – Compressed air line breathing apparatus with demand valve – Part 1: Apparatus with a full face mask – Requirements, testing, marking
162.	EN 14594:2018Respiratory protective devices – Continuous flow compressed air line breathing devices – Requirements, testing and marking
163.	EN 14605:2005+A1:2009Protective clothing against liquid chemicals – performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4])
164.	EN ISO 14877:2002Protective clothing for abrasive blasting operations using granular abrasives (ISO 14877:2002)
165.	EN ISO 15027-1:2012Immersion suits – Part 1: Constant wear suits, requirements including safety (ISO 15027-1:2012)
166.	EN ISO 15027-2:2012Immersion suits – Part 2: Abandonment suits, requirements including safety (ISO 15027-2:2012)
167.	EN 15090:2012Footwear for firefighters
168.	EN 15151-1:2012Mountaineering equipment – Braking devices – Part 1: Braking devices with manually assisted locking, safety requirements and test methods
169.	EN 15333-1:2008Respiratory equipment – Open-circuit umbilical supplied compressed gas diving apparatus – Part 1: Demand apparatusEN 15333-1:2008/AC:2009
170.	EN 15333-2:2009Respiratory equipment – Open-circuit umbilical supplied compressed gas diving apparatus – Part 2: Free flow apparatus
171.	EN 15613:2008Knee and elbow protectors for indoor sports – Safety requirements and test methods
172.	EN 16027:2011Protective clothing – Gloves with protective effect for association football goal keepers
173.	EN ISO 16321-1:2022Eye and face protection for occupational use – Part 1: General requirements (ISO 16321-1:2021)
173a.	EN ISO 16321-1:2022Eye and face protection for occupational use – Part 1: General requirements (ISO 16321-1:2021)EN ISO 16321-1:2022/A1:2025
174.	EN ISO 16321-2:2021Eye and face protection for occupational use – Part 2: Additional requirements for protectors used during welding and related techniques (ISO 16321-2:2021)Notice: This standard makes reference to normative reference EN ISO 16321-1:2020, the date of which is incorrect. It shall be read as EN ISO 16321-1:2022 instead.
175.	EN ISO 16321-3:2022Eye and face protection for occupational use – Part 3: Additional requirements for mesh protectors (ISO 16321-3:2021)Notice: This standard makes reference to normative reference EN ISO 16321-1:2020, the date of which is incorrect. It shall be read as EN ISO 16321-1:2022 instead.
175a.	EN ISO 16321-3:2022Eye and face protection for occupational use – Part 3: Additional requirements for mesh protectors (ISO 16321-3:2021)EN ISO 16321-3:2022/A1:2026Notice: This standard makes reference to normative reference EN ISO 16321-1:2020, the date of which is incorrect. It shall be read as EN ISO 16321-1:2022 instead.
176.	EN 16350:2014Protective gloves – Electrostatic properties
177.	EN 16473:2014Firefighters helmets – Helmets for technical rescue
178.	EN 16716:2017Mountaineering equipment – Avalanche airbag systems – Safety requirements and test methods
179.	EN 17092-2:2020Protective garments for motorcycle riders – Part 2: Class AAA garments – Requirements
180.	EN 17092-3:2020Protective garments for motorcycle riders – Part 3: Class AA garments – Requirements
181.	EN 17092-4:2020Protective garments for motorcycle riders – Part 4: Class A garments – Requirements
182.	EN 17092-5:2020Protective garments for motorcycle riders – Part 5: Class B garments – Requirements
183.	EN 17092-6:2020Protective garments for motorcycle riders – Part 6: Class C garments – Requirements
184.	EN 17109:2020+A1:2024Mountaineering equipment – Individual safety systems for rope courses – Safety requirements and test methods
185.	EN ISO 17249:2013Safety footwear with resistance to chain saw cutting (ISO 17249:2013)EN ISO 17249:2013/AC:2014
186.	EN 17353:2020+A1:2025Protective clothing - Enhanced visibility equipment for medium risk situations - Test methods and requirements
187.	EN 17487:2024Protective clothing – Garments with permethrin as-treated articles supporting the protection against tick bites
188.	EN 17520:2021Mountaineering equipment – Personal belay lanyards – Safety requirements and test methods
189.	EN 17961:2025Mountaineering equipment - Load sharing devices - Safety requirements and test methods
190.	EN 18100:2025Mountaineering equipment - Helmets for ski mountaineers - Safety requirements and test methods
191.	EN ISO 18527-1:2022Eye and face protection for sports use – Part 1: Requirements for downhill skiing and snowboarding goggles (ISO 18527-1:2021)
192.	EN ISO 18527-2:2021Eye and face protection for sports use – Part 2: Requirements for eye protectors for squash and eye protectors for racquetball and squash 57 (ISO 18527-2:2021)
193.	EN ISO 20320:2020Protective clothing for use in Snowboarding – Wrist Protectors – Requirements and test methods (ISO 20320:2020)
194.	EN ISO 20345:2022Personal protective equipment – Safety footwear (ISO 20345:2021)EN ISO 20345:2022/A1:2024
195.	EN ISO 20346:2022Personal protective equipment – Protective footwear (ISO 20346:2021)EN ISO 20346:2022/A1:2024
196.	EN ISO 20347:2022Personal protective equipment – Occupational footwear (ISO 20347:2021)EN ISO 20347:2022/A1:2024
197.	EN ISO 20349-1:2017Personal protective equipment – Footwear protecting against risks in foundries and welding – Part 1: Requirements and test methods for protection against risks in foundries (ISO 20349-1:2017)EN ISO 20349-1:2017/A1:2020
198.	EN ISO 20349-2:2017Personal protective equipment – Footwear protecting against risks in foundries and welding – Part 2: Requirements and test methods for protection against risks in welding and allied processes (ISO 20349-2:2017)EN ISO 20349-2:2017/A1:2020
199.	EN ISO 20471:2013High visibility clothing – Test methods and requirements (ISO 20471:2013, Corrected version 2013-06-01)EN ISO 20471:2013/A1:2016
200.	EN ISO 21420:2020Protective gloves - General requirements and test methods - Amendment 1 (ISO 21420:2020/Amd 1:2022)EN ISO 21420:2020/A1:2024
200a.	EN ISO 24232:2025Protective clothing – Protection against rain (ISO 24232:2024)
201.	EN ISO 27065:2017Protective clothing – Performance requirements for protective clothing worn by operators applying pesticides and for re-entry workers (ISO 27065:2017)EN ISO 27065:2017/A1:2019
202.	EN 50321-1:2018Live working – Footwear for electrical protection – Insulating footwear and overbootsEN 50321-1:2018/AC:2018-08
203.	EN 50365:2023Live Working – Electrically insulating helmets for use on low and medium voltage installationsEN 50365:2023/AC:2024-09
204.	EN 61482-2:2020Live working – Protective clothing against the thermal hazards of an electric arc – Part 2: Requirements (IEC 61482-2:2018, Modified)

Annex II

No	Reference of the standard	Date of withdrawal
1.	EN 352-2:2020Hearing protectors – General requirements – Part 2: EarplugsNotice: This standard does not require labelling indicating the noise attenuation level on the product. Compliance with this standard therefore does not confer a presumption of conformity with point 3.5., second paragraph, of Annex II to Regulation (EU) 2016/425.	16.11.2026
2.	EN 352-6:2020Hearing protectors – Safety requirements – Part 6: Earmuffs with safety-related audio input	14.08.2026
3.	EN 352-8:2020Hearing protectors – Safety requirements – Part 8: Entertainment audio earmuffs	14.08.2026
4.	EN 352-9:2020Hearing protectors – Safety requirements – Part 9: Earplugs with safety-related audio input	14.08.2026
5.	EN 352-10:2020Hearing protectors – Safety requirements – Part 10: Entertainment audio earplugs	14.08.2026
6.	EN 353-2:2002Personal protective equipment against falls from a height – Part 2: Guided type fall arresters including a flexible anchor line	16.11.2026
7.	EN 397:2012+A1:2012Industrial safety helmets	16.12.2027
8.	EN 420:2003+A1:2009Protective gloves – General requirements and test methods	16.12.2027
9.	EN 813:2008Personal fall protection equipment – Sit harnesses	14.08.2026
10.	EN 958:2017Mountaineering equipment – Energy absorbing systems for use in klettersteig (via ferrata) climbing – Safety requirements and test methods	16.11.2026
11.	EN ISO 12312-1:2013Eye and face protection – Sunglasses and related eyewear – Part 1: Sunglasses for general use (ISO 12312-1:2013)EN ISO 12312-1:2013/A1:2015	16.12.2027
12.	EN 12492:2012Mountaineering equipment – Helmets for mountaineers – Safety requirements and test methods	16.12.2027
13.	EN 12941:1998Respiratory protective devices – Powered filtering devices incorporating a helmet or a hood – Requirements, testing, markingEN 12941:1998/A1:2003EN 12941:1998/A2:2008	08.10.2027
14.	EN 12942:1998Respiratory protective devices – Power assisted filtering devices incorporating full face masks, half masks or quarter masks – Requirements, testing, markingEN 12942:1998/A1:2002EN 12942:1998/A2:2008	08.10.2027
15.	EN 17109:2020Mountaineering equipment – Individual safety systems for rope courses – Safety requirements and test methods	16.11.2026
16.	EN 17353:2020Protective clothing – Enhanced visibility equipment for medium risk situations – Test methods and requirements	16.12.2027

Article 1#

Article 2#

Article 3#

Annex I

Annex II

Article 1 #

Article 2 #

Article 3 #