Contents
THE EUROPEAN COMMISSION,Having regard to the Treaty on the Functioning of the European Union,Having regard to Decision No 676/2002/EC of the European Parliament and of the Council of 7 March 2002 on a regulatory framework for radio spectrum policy in the European Community (Radio Spectrum Decision)note, and in particular Article 4(3) thereof,Whereas:
(1)Commission Implementing Decision (EU) 2021/1067note harmonises the 5945–6425 MHz band for wireless access systems including radio local area networks. Table 2 of the Annex to that Decision sets, for Very Low Power (VLP) WAS/RLAN devices, the limit of maximum mean equivalent isotropically radiated power (e.i.r.p.) density for out-of-band (OOB) emissions below 5935 MHz at – 45 dBm/MHz until 31 December 2024. Moreover, Note 3 of that Table provides that the appropriateness of that limit should be subject to review by 31 December 2024, and that in the absence of justified evidence, a value of – 37 dBm/MHz would apply from 1 January 2025.
(2)On 21 April 2021, pursuant to Article 4(2) of Decision No 676/2002/EC, the Commission issued a mandate to the European Conference of Postal and Telecommunications Administrations (‘CEPT’) to review by July 2024 the limit of OOB emissions below 5935 MHz applicable to VLP WAS/RLAN devices using the 5945–6425 MHz band, based on, in particular, the study of possible mitigation techniques for the protection of urban rail intelligent transport systems (ITS), with the view to relaxing the limit to – 37 dBm/MHz. This was justified by the need to ensure transport safety and the coexistence of such devices with the ITS, including communication based train control (CBTC), which use spectrum in parts of the 5905–5935 MHz frequency band.
(3)As the CEPT has not been able to deliver the results of the mandate by July 2024, it is essential to ensure legal certainty for transport safety regarding the appropriate limit of maximum mean e.i.r.p. density for OOB emissions to apply below 5935 MHz for VLP WAS/RLAN devices. Therefore, until a proper review has been completed by the CEPT pursuant to the mandate, it should be ensured that the current value of – 45 dBm/MHz continues to apply beyond 31 December 2024. Sufficient time should also be allowed to the CEPT to complete the expected review and therefore the deadline for such review should be prolonged until 31 December 2025.
(4)The measures provided for in this Decision are in accordance with the opinion of the Radio Spectrum Committee,
HAS ADOPTED THIS DECISION:
Article 1#
Implementing Decision (EU) 2021/1067 is amended as follows:
(1)Article 4 is replaced by the following:‘Article 4This Decision shall be subject to review by 31 December 2025 taking into account additional studies and measurements as regards the maximum mean e.i.r.p. density limit for VLP WAS/RLANs out-of-band emissions below 5935 MHz.’;
(2)the Annex is replaced by the text set out in the Annex to this Decision.
‘’
Harmonised technical conditions for WAS/RLANs in the 5945–6425 MHz frequency band
| Parameter | Technical conditions |
| Permissible operation | Restricted to indoor use, including in trains with metal-coated windows (note 1) and aircraft.Outdoor use, including in road vehicles, is not permitted. |
| Category of device | An LPI access point or bridge that is supplied with power from a wired connection has an integrated antenna and is not battery powered.An LPI client device that is connected to an LPI access point or another LPI client device and may or may not be battery powered. |
| Frequency band | 5945–6425 MHz |
| Maximum mean equivalent isotropically radiated power (‘e.i.r.p.’) for in-band emissions (note 2) | 23 dBm |
| Maximum mean e.i.r.p. density for in-band emissions (note 2) | 10 dBm/MHz |
| Maximum mean e.i.r.p. density for out-of-band emissions below 5935 MHz (note 2) | – 22 dBm/MHz |
Techniques to access spectrum and mitigate interference that provide an appropriate level of performance to comply with the essential requirements of Directive 2014/53/EU of the European Parliament and of the Councilnote shall be used. Where relevant techniques are described in harmonised standards or parts thereof the references of which have been published in the Official Journal of the European Union in accordance with Directive 2014/53/EU, performance at least equivalent to the performance level associated with those techniques shall be ensured.
| Parameter | Technical conditions |
| Permissible operation | Indoors and outdoors.Use on Unmanned Aircraft Systems (UAS) is not permitted. |
| Category of device | The VLP device is a portable device. |
| Frequency band | 5945–6425 MHz |
| Maximum mean e.i.r.p. for in-band emissions (note 1) | 14 dBm |
| Maximum mean e.i.r.p. density for in-band emissions (note 1) | 1 dBm/MHz |
| Narrowband usage maximum mean e.i.r.p. density for in-band emissions (note 1) (note 2) | 10 dBm/MHz |
| Maximum mean e.i.r.p. density for out-of-band emissions below 5935 MHz (note 1) | – 45 dBm/MHz (note 3) |
Techniques to access spectrum and mitigate interference that provide an appropriate level of performance to comply with the essential requirements of Directive 2014/53/EU shall be used. Where relevant techniques are described in harmonised standards or parts thereof the references of which have been published in the Official Journal of the European Union in accordance with Directive 2014/53/EU, performance at least equivalent to the performance level associated with those techniques shall be ensured.
Source: EUR-Lex, © European Union, 1998-2026. Reuse authorised under Decision 2011/833/EU.