law://eu/dec/2009/381@2026-11-18THE COMMISSION OF THE EUROPEAN COMMUNITIES,Having regard to the Treaty establishing the European Community,Having regard to Decision No 676/2002/EC of the European Parliament and of the Council of 7 March 2002 on a regulatory framework for radio spectrum policy in the European Community (Radio Spectrum Decision)note, and in particular Article 4(3) thereof,Whereas:
HAS ADOPTED THIS DECISION:
| Type of short-range device | Frequency band | Power limit/field strength limit/power density limitnote | Additional parameters/spectrum access and mitigation requirementsnote | Other usage restrictionsnote | Implementation deadline |
|---|---|---|---|---|---|
| Non-specific short-range devicesnote | 6765–6795 kHz | 42 dBμA/m at 10 metres | 1 October 2008 | ||
| 13,553–13,567 MHz | 42 dBμA/m at 10 metres | 1 October 2008 | |||
| 26,957–27,283 MHz | 10 mW effective radiated power (e.r.p.), which corresponds to 42 dBμA/m at 10 metres | Video applications are excluded | 1 June 2007 | ||
| 40,660–40,700 MHz | 10 mW e.r.p. | Video applications are excluded | 1 June 2007 | ||
| 433,050–434,040note MHz | 1 mW e.r.p.and – 13dBm/10 kHz power density for bandwidth modulation larger than 250 kHz | Audio and voice signals, and video applications, are excluded | 1 October 2008 | ||
| 10 mW e.r.p. | Duty cyclenote |
Source: EUR-Lex, © European Union, 1998-2026. Reuse authorised under Decision 2011/833/EU.
| Audio and voice signals, and video applications, are excluded |
| 1 June 2007 |
| 434,040–434,790note MHz | 1 mW e.r.p.and – 13dBm/10 kHz power density for bandwidth modulation larger than 250 kHz | Audio and voice signals, and video applications, are excluded | 1 October 2008 |
| 10 mW e.r.p. | Duty cyclenote: 10 % | Audio and voice signals, and video applications, are excluded | 1 June 2007 |
| Duty cyclenote: 100 % subject to channel spacing up to 25 kHz | Audio and voice signals, and video applications, are excluded | 1 October 2008 |
| 863,000–868,000 MHz | 25 mW e.r.p. | Techniques to access spectrum and mitigate interference that provide at least equivalent performance to the techniques described in harmonised standards adopted under Directive 1999/5/EC must be used. Alternatively a duty cyclenote of 0,1 % may also be used | Audio and voice signals, and video applications, are excluded | 1 October 2008 |
| 868,000–868,600note MHz | 25 mW e.r.p. | Techniques to access spectrum and mitigate interference that provide at least equivalent performance to the techniques described in harmonised standards adopted under Directive 1999/5/EC must be used. Alternatively a duty cyclenote of 1 % may also be used | Video applications are excluded | 1 October 2008 |
| 25 mW e.r.p. | Techniques to access spectrum and mitigate interference that provide at least equivalent performance to the techniques described in harmonised standards adopted under Directive 1999/5/EC must be used. Alternatively a duty cyclenote of 0,1 % may also be used | Audio and voice signals, and video applications, are excluded | 1 October 2008 |
| 868,700–869,200note MHz | 25 mW e.r.p. | Techniques to access spectrum and mitigate interference that provide at least equivalent performance to the techniques described in harmonised standards adopted under Directive 1999/5/EC must be used. Alternatively a duty cyclenote of 0,1 % may also be used | Video applications are excluded | 1 October 2008 |
| 25 mW e.r.p. | Techniques to access spectrum and mitigate interference that provide at least equivalent performance to the techniques described in harmonised standards adopted under Directive 1999/5/EC must be used. Alternatively a duty cyclenote of 0,1 % may also be used | Audio and voice signals, and video applications, are excluded | 1 October 2008 |
| 869,400–869,650note MHz | 500 mW e.r.p. | Techniques to access spectrum and mitigate interference that provide at least equivalent performance to the techniques described in harmonised standards adopted under Directive 1999/5/EC must be used. Alternatively a duty cyclenote of 10 % may also be usedChannel spacing must be 25 kHz, except that the whole band may also be used as a single channel for high-speed data transmission | Video applications are excluded | 1 October 2008 |
| 25 mW e.r.p. | Techniques to access spectrum and mitigate interference that provide at least equivalent performance to the techniques described in harmonised standards adopted under Directive 1999/5/EC must be used. Alternatively a duty cyclenote of 0,1 % may also be used | Audio and voice signals, and video applications, are excluded | 1 October 2008 |
| 869,700–870,000note MHz | 5 mW e.r.p. | Voice applications allowed with advanced mitigation techniques | Audio and video applications are excluded | 1 June 2007 |
| 25 mW e.r.p. | Techniques to access spectrum and mitigate interference that provide at least equivalent performance to the techniques described in harmonised standards adopted under Directive 1999/5/EC must be used. Alternatively a duty cyclenote of 0,1 % may also be used | Audio and voice signals, and video applications, are excluded | 1 October 2008 |
| 2400–2483,5 MHz | 10 mW equivalent isotropic radiated power (e.i.r.p.) | 1 June 2007 |
| 5725–5875 MHz | 25 mW e.i.r.p. | 1 June 2007 |
| 24,150–24,250 GHz | 100 mW e.i.r.p. | 1 October 2008 |
| 61,0–61,5 GHz | 100 mW e.i.r.p. | 1 October 2008 |
| Wideband data transmission systems | 2400–2483,5 MHz | 100 mW e.i.r.p.and 100 mW/100 kHz e.i.r.p. density applies when frequency hopping modulation is used, 10 mW/MHz e.i.r.p. density applies when other types of modulation are used | Techniques to access spectrum and mitigate interference that provide at least equivalent performance to the techniques described in harmonised standards adopted under Directive 1999/5/EC must be used | 1 November 2009 |
| 57,0–66,0note GHz | 40 dBm e.i.r.p.and 13 dBm/MHz e.i.r.p. density | Outdoor applications are excluded | 1 November 2009 |
| 25 dBm e.i.r.p.and – 2 dBm/MHz e.i.r.p. density | Fixed outdoor installations are excluded | 1 November 2009 |
| Alarm systems | 868,600–868,700 MHz | 10 mW e.r.p. | Channel spacing: 25 kHzThe whole frequency band may also be used as a single channel for high-speed data transmissionDuty cyclenote: 1,0 % | 1 October 2008 |
| 869,250–869,300 MHz | 10 mW e.r.p. | Channel spacing: 25 kHzDuty cyclenote: 0,1 % | 1 June 2007 |
| 869,300–869,400 MHz | 10 mW e.r.p. | Channel spacing: 25 kHzDuty cyclenote: 1,0 % | 1 October 2008 |
| 869,650–869,700 MHz | 25 mW e.r.p. | Channel spacing: 25 kHzDuty cyclenote: 10 % | 1 June 2007 |
| Social alarmsnote | 869,200–869,250 MHz | 10 mW e.r.p. | Channel spacing: 25 kHzDuty cyclenote: 0,1 % | 1 June 2007 |
| Inductive applicationsnote | 20,050–59,750 kHz | 72 dBμA/m at 10 metres | 1 June 2007 |
| 59,750–60,250 kHz | 42 dBμA/m at 10 metres | 1 June 2007 |
| 60,250–70,000 kHz | 69 dBμA/m at 10 metres | 1 June 2007 |
| 70–119 kHz | 42 dBμA/m at 10 metres | 1 June 2007 |
| 119–127 kHz | 66 dBμA/m at 10 metres | 1 June 2007 |
| 127–140 kHz | 42 dBμA/m at 10 metres | 1 October 2008 |
| 140–148,5 kHz | 37,7 dBμA/m at 10 metres | 1 October 2008 |
| 148,5–5000 kHzIn the specific bands mentioned below, higher field strengths and additional usage restrictions apply: | – 15 dBμA/m at 10 metres in any bandwidth of 10 kHzFurthermore the total field strength is – 5 dΒμΑ/m at 10 m for systems operating at bandwidths larger than 10 kHz | 1 October 2008 |
| 400–600 kHz | – 8 dBμA/m at 10 metres | This set of usage conditions applies to RFIDnote only | 1 October 2008 |
| 3155–3400 kHz | 13,5 dBμA/m at 10 metres | 1 October 2008 |
| 5000–30000 kHzIn the specific bands mentioned below, higher field strengths and additional usage restrictions apply: | – 20 dBμA/m at 10 metres in any bandwidth of 10 kHzFurthermore the total field strength is – 5 dΒμΑ/m at 10 m for systems operating at bandwidths larger than 10 kHz | 1 October 2008 |
| 6765–6795 kHz | 42 dBμA/m at 10 metres | 1 June 2007 |
| 7400–8800 kHz | 9 dBμA/m at 10 metres | 1 October 2008 |
| 10200–11000 kHz | 9 dBμA/m at 10 metres | 1 October 2008 |
| 13553–13567 kHz | 42 dBμA/m at 10 metres | 1 June 2007 |
| 60 dBμA/m at 10 metres | This set of usage conditions applies to RFIDnote and EASnote only | 1 October 2008 |
| 26957–27283 kHz | 42 dBμA/m at 10 metres | 1 October 2008 |
| Active medical implantsnote | 9–315 kHz | 30 dBμA/m at 10 m | Duty cyclenote: 10 % | 1 October 2008 |
| 402–405 MHz | 25 μW e.r.p. | Channel spacing: 25 kHzIndividual transmitters may combine adjacent channels for increased bandwidth up to 300 kHz.Other techniques to access spectrum or mitigate interference, including bandwidths greater than 300 kHz, can be used provided they result at least in an equivalent performance to the techniques described in harmonised standards adopted under Directive 1999/5/EC to ensure compatible operation with the other users and in particular with meteorological radiosondes. | 1 November 2009 |
| Wireless audio applicationsnote | 87,5–108,0 MHz | 50 nW e.r.p. | Channel spacing up to 200 kHz | 1 October 2008 |
| 863–865 MHz | 10 mW e.r.p. | 1 June 2007 |
| Radio determination applicationsnote | 2400–2483,5 MHz | 25 mW e.i.r.p. | 1 November 2009 |
| 17,1–17,3 GHz | 26 dBm e.i.r.p. | Techniques to access spectrum and mitigate interference that provide at least equivalent performance to the techniques described in harmonised standards adopted under Directive 1999/5/EC must be used. | This set of usage conditions applies to ground based systems only | 1 November 2009 |
| Tank Level Probing Radarnote | 4,5–7,0 GHz | 24 dBm e.i.r.p.note | 1 November 2009 |
| 8,5–10,6 GHz | 30 dBm e.i.r.p.note | 1 November 2009 |
| 24,05–27,0 GHz | 43 dBm e.i.r.p.note | 1 November 2009 |
| 57,0–64,0 GHz | 43 dBm e.i.r.p.note | 1 November 2009 |
| 75,0–85,0 GHz | 43 dBm e.i.r.p.note | 1 November 2009 |
| Model Controlnote | 26990–27000 kHz | 100 mW e.r.p. | 1 November 2009 |
| 27040–27050 kHz | 100 mW e.r.p. | 1 November 2009 |
| 27090–27100 kHz | 100 mW e.r.p. | 1 November 2009 |
| 27140–27150 kHz | 100 mW e.r.p. | 1 November 2009 |
| 27190–27200 kHz | 100 mW e.r.p. | 1 November 2009 |
| Radio Frequency Identification (RFID) | 2446–2454 MHz | 100 mW e.i.r.p. | 1 November 2009 |