6Recitals 2, 4, 6, 8, 11 and 32 of Decision 2011/278 state as follows:(2) In defining the principles for setting ex ante benchmarks in individual sectors or subsector(s), the starting point should be the average performance of the 10% most efficient installations in a sector or subsector in the EU in the years 2007-2008. The benchmarks should be calculated for products rather than for inputs, in order to maximise greenhouse gas emissions reductions and energy efficiency savings throughout each production process of the sector or the subsector concerned.…(4) To the extent feasible, the Commission has developed benchmarks for products, as well as intermediate products that are traded between installations, produced from activities listed in Annex I to Directive 2003/87/EC. In principle, for each product one benchmark should be defined. Where a product is a direct substitute of another product, both should be covered by the same product benchmark and the related product definition.…(6) The benchmark values should cover all production-related direct emissions, including emissions related to the production of measurable heat used for production, regardless of whether the measurable heat was produced on-site or by another installation. Emissions related to the production of electricity and to the export of measurable heat, including avoided emissions of alternative heat or electricity production in cases of exothermic processes or the production of electricity without direct emissions, were deducted when setting the benchmark values. … In case the deduction of emissions related to the export of measurable heat was not feasible, this heat should not be eligible for the free allocation of emission allowances.…(8) For the determination of benchmark values, the Commission has used as a starting point the arithmetic average of the greenhouse gas performance of the 10% most greenhouse gas efficient installations in 2007 and 2008 for which data has been collected. In addition, the Commission has in accordance with Article 10a(1) of Directive 2003/87/EC analysed for all sectors for which a product benchmark is provided for in Annex I, on the basis of additional information received from several sources and on the basis of a dedicated study analysing most efficient techniques and reduction potentials at European and international level, whether these starting points sufficiently reflect the most efficient techniques, substitutes, alternative production processes, high efficiency cogeneration, efficient energy recovery of waste gases, use of biomass and capture and storage of carbon dioxide, where such facilities are available. Data used for determining the benchmark values has been collected from a wide range of sources in order to cover a maximum of installations producing a benchmarked product in the years 2007 and 2008. First, data on the greenhouse gas performance of ETS installations producing benchmarked products has been collected by or on behalf of the respective European sector associations based on defined rules, so-called ‘sector rule books’. As reference for these rule books, the Commission provided guidance on quality and verification criteria for benchmarking data for the EU-ETS. Second, to complement the data collection by European sector associations, consultants on behalf of the European Commission collected data from installations not covered by industry’s data and also competent authorities of Member States provided data and analyses.…(11) In case no data or no data collected in compliance with the benchmarking methodology has been available, information on present levels of emissions and consumptions and on most efficient techniques, mainly derived from the Reference Documents on Best Available Techniques (BREF) established in accordance with Directive 2008/1/EC of the European Parliament and of the Council of 15 January 2008 concerning integrated pollution prevention and control … has been used to derive benchmark values. In particular, due to a lack of data on the treatment of waste gases, heat exports and electricity production, the values for the product benchmarks for coke and hot metal have been derived from calculations of direct and indirect emissions based on information on relevant energy flows provided by the relevant BREF and default emission factors set out in Commission Decision 2007/589/EC of 18 July 2007 establishing guidelines for the monitoring and reporting of greenhouse gas emissions pursuant to Directive 2003/87/EC of the European Parliament and of the Council … For the product benchmark for sintered ore, data has also been corrected based on relevant energy flows provided by the relevant BREF, taking into account the combustion of waste gases in the sector.…(32) It is also appropriate that the product benchmarks take account of the efficient energy recovery of waste gases and emissions related to their use. To this end, for the determination of the benchmark values for products of which the production generates waste gases, the carbon content of these waste gases has been taken into account to a large extent. Where waste gases are exported from the production process outside the system boundaries of the relevant product benchmark and combusted for the production of heat outside the system boundaries of a benchmarked process as defined in Annex I, related emissions should be taken into account by means of allocating additional emission allowances on the basis of the heat or fuel benchmark. In the light of the general principle that no emission allowances should be allocated for free in respect of any electricity production, to avoid undue distortions of competition on the markets for electricity supplied to industrial installations and taking into account the inherent carbon price in electricity, it is appropriate that, where waste gases are exported from the production process outside the system boundaries of the relevant product benchmark and combusted for the production of electricity, no additional allowances are allocated beyond the share of the carbon content of the waste gas accounted for in the relevant product benchmark.’
Source: EUR-Lex, © European Union, 1998-2026. Reuse authorised under Decision 2011/833/EU.